This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='firmware---ath10k-board-specific-overrides'

Sınıf AdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisansBakıcıHata raporuKaynak kod
firmware---ath10k-board-specific-overridesipq-wifi-zte_mf286d1libcThe ZTE MF286D requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the ZTE MF286D.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-teltonika_rutx1libcpackages:pkgdata:ipq-wifi-teltonika_rutx, The Teltonika RUTX requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Teltonika RUTX.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-teltonika_rutx, Bug reportspackages:pkgdata:ipq-wifi-teltonika_rutx, Sources
firmware---ath10k-board-specific-overridesipq-wifi-teltonika_rutx1libcThe Teltonika RUTX requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Teltonika RUTX.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-qxwlan_e2600ac-c21libcThe Qxwlan E2600AC C2 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Qxwlan E2600AC C2.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-qxwlan_e2600ac-c11libcpackages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, The Qxwlan E2600AC C1 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Qxwlan E2600AC C1.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, Bug reportspackages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, Sources
firmware---ath10k-board-specific-overridesipq-wifi-qxwlan_e2600ac-c11libcThe Qxwlan E2600AC C1 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Qxwlan E2600AC C1.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-qxwlan_e2600ac1libcThe Qxwlan E2600AC requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Qxwlan E2600AC.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-plasmacloud_pa22001libcThe Plasma Cloud PA2200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Plasma Cloud PA2200.

Do not install it for any other device!

5kB4kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-plasmacloud_pa12001libcpackages:pkgdata:ipq-wifi-plasmacloud_pa1200, The Plasma Cloud PA1200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Plasma Cloud PA1200.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-plasmacloud_pa1200, Bug reportspackages:pkgdata:ipq-wifi-plasmacloud_pa1200, Sources
firmware---ath10k-board-specific-overridesipq-wifi-plasmacloud_pa12001libcThe Plasma Cloud PA1200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Plasma Cloud PA1200.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-p2w_r619ac1libcThe P&W R619AC requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the P&W R619AC.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-nec_wg2600hp31libcpackages:pkgdata:ipq-wifi-nec_wg2600hp3, The NEC Platforms WG2600HP3 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the NEC Platforms WG2600HP3.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-nec_wg2600hp3, Bug reportspackages:pkgdata:ipq-wifi-nec_wg2600hp3, Sources
firmware---ath10k-board-specific-overridesipq-wifi-nec_wg2600hp31libcThe NEC Platforms WG2600HP3 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the NEC Platforms WG2600HP3.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-mobipromo_cm520-79f1libcpackages:pkgdata:ipq-wifi-mobipromo_cm520-79f, The MobiPromo CM520-79F requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the MobiPromo CM520-79F.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-mobipromo_cm520-79f, Bug reportspackages:pkgdata:ipq-wifi-mobipromo_cm520-79f, Sources
firmware---ath10k-board-specific-overridesipq-wifi-mobipromo_cm520-79f1libcThe MobiPromo CM520-79F requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the MobiPromo CM520-79F.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-mikrotik_sxtsq-5-ac1libcThe MikroTik SXTsq 5 ac requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the MikroTik SXTsq 5 ac.

Do not install it for any other device!

3kB1kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-mikrotik_hap-ac21libcThe Mikrotik hAP ac2 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Mikrotik hAP ac2.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-luma_wrtq-329acn1libcThe Luma WRTQ-329ACN requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Luma WRTQ-329ACN.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-linksys_mr8300-v01libcThe Linksys MR8300 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Linksys MR8300.

Do not install it for any other device!

5kB4kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-linksys_ea83001libcThe Linksys EA8300 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Linksys EA8300.

Do not install it for any other device!

6kB6kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-glinet_gl-s13001libcThe GL.iNet GL-S1300 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the GL.iNet GL-S1300.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-glinet_gl-b22001libcThe GL.iNet GL-B2200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the GL.iNet GL-B2200.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-glinet_gl-ap13001libcThe GL.iNet GL-AP1300 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the GL.iNet GL-AP1300.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-ezviz_cs-w3-wd1200g-eup1libcThe EZVIZ CS-W3-WD1200G EUP requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EZVIZ CS-W3-WD1200G EUP.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_emr35001libcThe EnGenius EMR3500 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EMR3500.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_emd11libcpackages:pkgdata:ipq-wifi-engenius_emd1, The EnGenius EMD1 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EMD1.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-engenius_emd1, Bug reportspackages:pkgdata:ipq-wifi-engenius_emd1, Sources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_emd11libcThe EnGenius EMD1 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EMD1.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_eap22001libcpackages:pkgdata:ipq-wifi-engenius_eap2200, The EnGenius EAP2200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EAP2200.

Do not install it for any other device!

5kB4kBOpenWrt teampackages:pkgdata:ipq-wifi-engenius_eap2200, Bug reportspackages:pkgdata:ipq-wifi-engenius_eap2200, Sources
firmware---ath10k-board-specific-overridesipq-wifi-engenius_eap22001libcThe EnGenius EAP2200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the EnGenius EAP2200.

Do not install it for any other device!

5kB4kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-edgecore_oap1001libcThe Edgecore OAP100 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Edgecore OAP100.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-edgecore_ecw54101libcThe Edgecore ECW5410 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Edgecore ECW5410.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-dlink_dap26101libcpackages:pkgdata:ipq-wifi-dlink_dap2610, The D-Link DAP-2610 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the D-Link DAP-2610.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-dlink_dap2610, Bug reportspackages:pkgdata:ipq-wifi-dlink_dap2610, Sources
firmware---ath10k-board-specific-overridesipq-wifi-dlink_dap26101libcThe D-Link DAP-2610 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the D-Link DAP-2610.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-devolo_magic-2-wifi-next1libcpackages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, The devolo Magic 2 WiFi next requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the devolo Magic 2 WiFi next.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, Bug reportspackages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, Sources
firmware---ath10k-board-specific-overridesipq-wifi-devolo_magic-2-wifi-next1libcThe devolo Magic 2 WiFi next requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the devolo Magic 2 WiFi next.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-cellc_rtl30vw1libcThe Cell C RTL30VW requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Cell C RTL30VW.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-buffalo_wtr-m2133hp1libcThe Buffalo WTR-M2133HP requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Buffalo WTR-M2133HP.

Do not install it for any other device!

4kB3kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-avm_fritzrepeater-12001libcThe AVM FRITZRepeater 1200 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the AVM FRITZRepeater 1200.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-asus_rt-ac42u1libcpackages:pkgdata:ipq-wifi-asus_rt-ac42u, The ASUS RT-AC42U requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the ASUS RT-AC42U.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-asus_rt-ac42u, Bug reportspackages:pkgdata:ipq-wifi-asus_rt-ac42u, Sources
firmware---ath10k-board-specific-overridesipq-wifi-asus_rt-ac42u1libcThe ASUS RT-AC42U requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the ASUS RT-AC42U.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-aruba_ap-3651libcpackages:pkgdata:ipq-wifi-aruba_ap-365, The Aruba AP-365 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Aruba AP-365.

Do not install it for any other device!

3kB2kBOpenWrt teampackages:pkgdata:ipq-wifi-aruba_ap-365, Bug reportspackages:pkgdata:ipq-wifi-aruba_ap-365, Sources
firmware---ath10k-board-specific-overridesipq-wifi-aruba_ap-3651libcThe Aruba AP-365 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Aruba AP-365.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-aruba_ap-3031libcThe Aruba AP-303 requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the Aruba AP-303.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
firmware---ath10k-board-specific-overridesipq-wifi-8dev_habanero-dvk1libcThe 8devices Habanero DVK requires board-specific, reference (“cal”) data
that is not yet present in the upstream wireless firmware distribution.

This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.

This is package is only necessary for the 8devices Habanero DVK.

Do not install it for any other device!

3kB2kBOpenWrt teamBug reportsSources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun