Paket tablosu
Paket sınıfları
Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.
Paketler tablosu
Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.
- Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
- Kolon başlığına tıklayarak kolonlar sıralanabilir.
- Süzme ölçünüzü
beyaz alanlara' girin.
Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.
Filtered by categories='firmware---ath10k-board-specific-overrides'
| Sınıf | Ad | Versiyon | ↑ Bağımlılıklar | ...........................................Tanım........................................... | Dosya boyutu | Yüklü boyut | Lisans | Bakıcı | Hata raporu | Kaynak kod |
|---|---|---|---|---|---|---|---|---|---|---|
| firmware---ath10k-board-specific-overrides | ipq-wifi-nec_wg2600hp3 | 1 | libc | packages:pkgdata:ipq-wifi-nec_wg2600hp3, The NEC Platforms WG2600HP3 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the NEC Platforms WG2600HP3. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-nec_wg2600hp3, Bug reports | packages:pkgdata:ipq-wifi-nec_wg2600hp3, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-teltonika_rutx | 1 | libc | packages:pkgdata:ipq-wifi-teltonika_rutx, The Teltonika RUTX requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Teltonika RUTX. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-teltonika_rutx, Bug reports | packages:pkgdata:ipq-wifi-teltonika_rutx, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_emd1 | 1 | libc | packages:pkgdata:ipq-wifi-engenius_emd1, The EnGenius EMD1 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EMD1. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-engenius_emd1, Bug reports | packages:pkgdata:ipq-wifi-engenius_emd1, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-aruba_ap-365 | 1 | libc | packages:pkgdata:ipq-wifi-aruba_ap-365, The Aruba AP-365 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Aruba AP-365. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-aruba_ap-365, Bug reports | packages:pkgdata:ipq-wifi-aruba_ap-365, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-plasmacloud_pa1200 | 1 | libc | packages:pkgdata:ipq-wifi-plasmacloud_pa1200, The Plasma Cloud PA1200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Plasma Cloud PA1200. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-plasmacloud_pa1200, Bug reports | packages:pkgdata:ipq-wifi-plasmacloud_pa1200, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac-c1 | 1 | libc | packages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, The Qxwlan E2600AC C1 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC C1. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, Bug reports | packages:pkgdata:ipq-wifi-qxwlan_e2600ac-c1, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_eap2200 | 1 | libc | packages:pkgdata:ipq-wifi-engenius_eap2200, The EnGenius EAP2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EAP2200. Do not install it for any other device! | 5kB | 4kB | OpenWrt team | packages:pkgdata:ipq-wifi-engenius_eap2200, Bug reports | packages:pkgdata:ipq-wifi-engenius_eap2200, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-dlink_dap2610 | 1 | libc | packages:pkgdata:ipq-wifi-dlink_dap2610, The D-Link DAP-2610 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the D-Link DAP-2610. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-dlink_dap2610, Bug reports | packages:pkgdata:ipq-wifi-dlink_dap2610, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-devolo_magic-2-wifi-next | 1 | libc | packages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, The devolo Magic 2 WiFi next requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the devolo Magic 2 WiFi next. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, Bug reports | packages:pkgdata:ipq-wifi-devolo_magic-2-wifi-next, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-asus_rt-ac42u | 1 | libc | packages:pkgdata:ipq-wifi-asus_rt-ac42u, The ASUS RT-AC42U requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the ASUS RT-AC42U. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-asus_rt-ac42u, Bug reports | packages:pkgdata:ipq-wifi-asus_rt-ac42u, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-mobipromo_cm520-79f | 1 | libc | packages:pkgdata:ipq-wifi-mobipromo_cm520-79f, The MobiPromo CM520-79F requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the MobiPromo CM520-79F. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | packages:pkgdata:ipq-wifi-mobipromo_cm520-79f, Bug reports | packages:pkgdata:ipq-wifi-mobipromo_cm520-79f, Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac-c1 | 1 | libc | The Qxwlan E2600AC C1 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC C1. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-glinet_gl-b2200 | 1 | libc | The GL.iNet GL-B2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the GL.iNet GL-B2200. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-asus_rt-ac42u | 1 | libc | The ASUS RT-AC42U requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the ASUS RT-AC42U. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-zte_mf286d | 1 | libc | The ZTE MF286D requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the ZTE MF286D. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-p2w_r619ac | 1 | libc | The P&W R619AC requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the P&W R619AC. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-aruba_ap-365 | 1 | libc | The Aruba AP-365 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Aruba AP-365. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-teltonika_rutx | 1 | libc | The Teltonika RUTX requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Teltonika RUTX. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac-c2 | 1 | libc | The Qxwlan E2600AC C2 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC C2. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-qxwlan_e2600ac | 1 | libc | The Qxwlan E2600AC requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Qxwlan E2600AC. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-plasmacloud_pa2200 | 1 | libc | The Plasma Cloud PA2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Plasma Cloud PA2200. Do not install it for any other device! | 5kB | 4kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-plasmacloud_pa1200 | 1 | libc | The Plasma Cloud PA1200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Plasma Cloud PA1200. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-mobipromo_cm520-79f | 1 | libc | The MobiPromo CM520-79F requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the MobiPromo CM520-79F. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-ezviz_cs-w3-wd1200g-eup | 1 | libc | The EZVIZ CS-W3-WD1200G EUP requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EZVIZ CS-W3-WD1200G EUP. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_emr3500 | 1 | libc | The EnGenius EMR3500 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EMR3500. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-luma_wrtq-329acn | 1 | libc | The Luma WRTQ-329ACN requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Luma WRTQ-329ACN. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_emd1 | 1 | libc | The EnGenius EMD1 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EMD1. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-engenius_eap2200 | 1 | libc | The EnGenius EAP2200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the EnGenius EAP2200. Do not install it for any other device! | 5kB | 4kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-edgecore_oap100 | 1 | libc | The Edgecore OAP100 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Edgecore OAP100. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-edgecore_ecw5410 | 1 | libc | The Edgecore ECW5410 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Edgecore ECW5410. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-dlink_dap2610 | 1 | libc | The D-Link DAP-2610 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the D-Link DAP-2610. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-devolo_magic-2-wifi-next | 1 | libc | The devolo Magic 2 WiFi next requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the devolo Magic 2 WiFi next. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-cellc_rtl30vw | 1 | libc | The Cell C RTL30VW requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Cell C RTL30VW. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-buffalo_wtr-m2133hp | 1 | libc | The Buffalo WTR-M2133HP requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Buffalo WTR-M2133HP. Do not install it for any other device! | 4kB | 3kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-avm_fritzrepeater-1200 | 1 | libc | The AVM FRITZRepeater 1200 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the AVM FRITZRepeater 1200. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-aruba_ap-303 | 1 | libc | The Aruba AP-303 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Aruba AP-303. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-8dev_habanero-dvk | 1 | libc | The 8devices Habanero DVK requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the 8devices Habanero DVK. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-linksys_mr8300-v0 | 1 | libc | The Linksys MR8300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Linksys MR8300. Do not install it for any other device! | 5kB | 4kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-linksys_ea8300 | 1 | libc | The Linksys EA8300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Linksys EA8300. Do not install it for any other device! | 6kB | 6kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-glinet_gl-s1300 | 1 | libc | The GL.iNet GL-S1300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the GL.iNet GL-S1300. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-glinet_gl-ap1300 | 1 | libc | The GL.iNet GL-AP1300 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the GL.iNet GL-AP1300. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-mikrotik_sxtsq-5-ac | 1 | libc | The MikroTik SXTsq 5 ac requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the MikroTik SXTsq 5 ac. Do not install it for any other device! | 3kB | 1kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-mikrotik_hap-ac2 | 1 | libc | The Mikrotik hAP ac2 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the Mikrotik hAP ac2. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |
| firmware---ath10k-board-specific-overrides | ipq-wifi-nec_wg2600hp3 | 1 | libc | The NEC Platforms WG2600HP3 requires board-specific, reference (“cal”) data that is not yet present in the upstream wireless firmware distribution. This package supplies board-2.bin file(s) that, in the interim, overwrite those supplied by the ath10k-firmware-* packages. This is package is only necessary for the NEC Platforms WG2600HP3. Do not install it for any other device! | 3kB | 2kB | OpenWrt team | Bug reports | Sources | |