This translation is older than the original page and might be outdated.

Paket tablosu

Bir paket sınıfına tıklamak Paketler Tablosu'nu binaenaleyh süzer, ama tabi ki kendiniz el ile de süzebilirsiniz.

Sınıfa göre sıralama

Aşağıdaki tablo perfomans sebepleriyle sayfa başına 50 paket gösterir.

  • Sonraki veya önceki 50 paketi göstermek için alt soldaki “sonraki sayfa” veya “önceki sayfa” bağlantılarına tıklayın.
  • Kolon başlığına tıklayarak kolonlar sıralanabilir.
  • Süzme ölçünüzü beyaz alanlara ' girin.

Eğer aşağıdaki tabloda paket adına tıklarsanız, paketin belgelendirmesi bulunan kendi sayfasına götürülürsünüz; eğer yoksa ekleyebilirsiniz.

Filtered by categories='firmware'

SınıfAdVersiyonBağımlılıklar...........................................Tanım...........................................Dosya boyutuYüklü boyutLisans BakıcıHata raporuKaynak kod
firmwaream33x-cm320130304-1libcTI AM335x PM firmware

7kB6kBImre KalozBug reportsSources
firmwaream33x-cm320130304-1libcpackages:pkgdata:am33x-cm3, TI AM335x PM firmware

7kB6kBImre Kalozpackages:pkgdata:am33x-cm3, Bug reportspackages:pkgdata:am33x-cm3, Sources
firmwarefman-layerscape-ls1043ardb2017-02-13-c275e913-1libcFMAN UCODE fman-ucode-2017-02-13-c275e913 for NXP ls1043ardb 64b/32b Dev Board

0kB0kBJiang YutangBug reportsSources
firmwarefman-layerscape-ls1046ardb2017-02-13-c275e913-1libcFMAN UCODE fman-ucode-2017-02-13-c275e913 for NXP ls1046ardb 64b/32b Dev Board

0kB0kBJiang YutangBug reportsSources
firmwarercw-layerscape-ls1043ardb2017-12-01-cbd5e66f-1libcRCW binary 2017-12-01-cbd5e66f for NXP ls1043ardb 64b/32b Dev Board

0kB0kBBSD-3-ClauseJiang YutangBug reportsSources
firmwarercw-layerscape-ls1046ardb2017-12-01-cbd5e66f-1libcRCW binary 2017-12-01-cbd5e66f for NXP ls1046ardb 64b/32b Dev Board

0kB0kBBSD-3-ClauseJiang YutangBug reportsSources
firmwarelayerscape-dpl-ls1088ardb2017-09-07-a6c83759-1libcNXP LS1088ARDB DPL firmware

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-dpl-ls2088ardb2017-09-07-a6c83759-1libcNXP LS2088ARDB DPL firmware

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-mc-ls1088ardb2014-07-02-40b0c8b7-1libcNXP LS1088ARDB MC firmware

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-mc-ls2088ardb2014-07-02-40b0c8b7-1libcNXP LS2088ARDB MC firmware

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-ppa-ls1012afrdm2018-01-18-cd295be2-1libcPPA firmware 2018-01-18-cd295be2 for NXP ls1012afrdm 64b/32b Dev Board

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-ppa-ls1012ardb2018-01-18-cd295be2-1libcPPA firmware 2018-01-18-cd295be2 for NXP ls1012ardb 64b/32b Dev Board

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-ppa-ls1043ardb2018-01-18-cd295be2-1libcPPA firmware 2018-01-18-cd295be2 for NXP ls1043ardb 64b/32b Dev Board

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-ppa-ls1046ardb2018-01-18-cd295be2-1libcPPA firmware 2018-01-18-cd295be2 for NXP ls1046ardb 64b/32b Dev Board

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-ppa-ls1088ardb2018-01-18-cd295be2-1libcPPA firmware 2018-01-18-cd295be2 for NXP ls1088ardb 64b/32b Dev Board

0kB0kBLEDE teamBug reportsSources
firmwarelayerscape-ppa-ls2088ardb2018-01-18-cd295be2-1libcPPA firmware 2018-01-18-cd295be2 for NXP ls2088ardb 64b/32b Dev Board

0kB0kBLEDE teamBug reportsSources
firmwarercw-layerscape-ls1012afrdm2017-11-19-bf3ae3cb-1libcNXP LS1012AFRDM RCW Binary

0kB0kBLEDE teamBug reportsSources
firmwarercw-layerscape-ls1012ardb2017-11-19-bf3ae3cb-1libcNXP LS1012ARDB RCW Binary

0kB0kBLEDE teamBug reportsSources
firmwarercw-layerscape-ls1088ardb2017-11-19-bf3ae3cb-1libcNXP LS1088ARDB RCW Binary

0kB0kBLEDE teamBug reportsSources
firmwarercw-layerscape-ls2088ardb2017-11-19-bf3ae3cb-1libcNXP LS2088ARDB RCW Binary

0kB0kBLEDE teamBug reportsSources
firmwareath10k-firmware-qca99x0-ct-htt2020-11-08-1libc, ath10k-board-qca99x0Alternative ath10k firmware for QCA99x0 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

385kB387kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca99x0-ct2020-11-08-1libc, ath10k-board-qca99x0Alternative ath10k firmware for QCA99x0 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 99×0 firmware, so select only
one.

423kB425kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca988x-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca988xAlternative ath10k firmware for QCA988X from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware will NOT be used unless the standard ath10k-firmware-qca988x
is un-selected since the driver will try to load firmware-5.bin before
firmware-2.bin

178kB177kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca4019-ct-htt2020-11-08-1libcAlternative ath10k firmware for IPQ4019 radio from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features.
See: http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

384kB384kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca4019-ct2020-11-08-1libcAlternative ath10k firmware for IPQ4019 radio from Candela Technologies.
Enables IBSS and other features. Works with standard or ath10k-ct driver.
See: http://www.candelatech.com/ath10k-10.4.php

428kB428kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9887-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca9887Alternative ath10k firmware for QCA9887 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware conflicts with the standard 9887 firmware, so select only
one.

184kB183kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9888-ct-htt2020-11-08-1libc, ath10k-board-qca9888Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

417kB417kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9888-ct2020-11-08-1libc, librt, libpthread, ath10k-board-qca9888Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 9886 and 9888 firmware, so select only
one.

465kB465kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9984-ct-htt2020-11-08-1libc, ath10k-board-qca9984Alternative ath10k firmware for QCA9984 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
This firmware lacks a lot of features that ath10k does not use, saving
a lot of resources.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

396kB398kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9984-ct2020-11-08-1libc, ath10k-board-qca9984Alternative ath10k firmware for QCA9984 from Candela Technologies.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware conflicts with the standard 9984 firmware, so select only
one.

458kB460kBOpenWrt teamBug reportsSources
firmwareb43legacy-firmware3.130.20.0-1libcBroadcom bcm43xx b43legacy firmware

16kB16kBOpenWrt teamBug reportsSources
firmwaredsl-vrx200-firmware-xdsl-a-patch05.08.01.08.01.06_05...c-1libc, dsl-vrx200-firmware-xdsl-b, bspatchPatch which between the Annex A and Annex B firmware to create the Annex A firmware.

234kB233kBOpenWrt teamBug reportsSources
firmwaredsl-vrx200-firmware-xdsl-a05.08.01.08.01.06_05...c-1libcVRX200 / VR9 CPE VDSL and ADSL Annex A firmware

500kB529kBOpenWrt teamBug reportsSources
firmwaredsl-vrx200-firmware-xdsl-b-patch05.08.01.08.01.06_05...c-1libc, dsl-vrx200-firmware-xdsl-a, bspatchPatch which between the Annex A and Annex B firmware to create the Annex B firmware.

248kB248kBOpenWrt teamBug reportsSources
firmwaredsl-vrx200-firmware-xdsl-b05.08.01.08.01.06_05...c-1libcVRX200 / VR9 CPE VDSL and ADSL Annex B firmware

522kB551kBOpenWrt teamBug reportsSources
firmwareintel-microcode20220510-1libcIntel x86 CPU microcode

5651kB5649kBOpenWrt teamBug reportsSources
firmwarejboot-tools1libcThis package contains:
jboot_config_read.c: partially read the config partition of JBOOT based D-Link devices.

3kB3kBOpenWrt teamBug reportsSources
firmwarelayerscape-ppfe21.08-3libcNXP Layerscape PPFE firmware

29kB29kBOpenWrt teamBug reportsSources
firmwarep54-pci-firmware1libcp54-pci firmware

23kB22kBOpenWrt teamBug reportsSources
firmwarep54-spi-firmware1libc, librt, libpthreadp54-spi firmware

26kB26kBOpenWrt teamBug reportsSources
firmwarep54-usb-firmware1libc, librt, libpthreadp54-usb firmware

23kB23kBOpenWrt teamBug reportsSources
firmwareprism54-firmware1libcprism54 firmware

79kB78kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca988x-ct-full-htt2020-11-08-1libc, ath10k-board-qca988xAlternative ath10k firmware for QCA988X from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and fixes .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware selects and requires the ath10k-ct driver.

178kB177kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca99x0-ct-full-htt2020-11-08-1libc, ath10k-board-qca99x0Alternative ath10k firmware for QCA99x0 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

423kB425kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9887-ct-full-htt2020-11-08-1libc, ath10k-board-qca9887Alternative ath10k firmware for QCA9887 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and fixes .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.1.php
This firmware selects and requires the ath10k-ct driver.

184kB183kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca4019-ct-full-htt2020-11-08-1libcAlternative ath10k firmware for IPQ4019 radio from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
Enables IBSS and other features.
See: http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

428kB428kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9888-ct-full-htt2020-11-08-1libc, ath10k-board-qca9888Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

465kB465kBOpenWrt teamBug reportsSources
firmwareath10k-firmware-qca9984-ct-full-htt2020-11-08-1libc, ath10k-board-qca9984Alternative ath10k firmware for QCA9984 from Candela Technologies.
Uses normal HTT TX data path for management frames, which improves
stability in busy networks and may be required for .11r authentication.
Enables IBSS and other features. See:
http://www.candelatech.com/ath10k-10.4.php
This firmware selects and requires the ath10k-ct driver.

457kB460kBOpenWrt teamBug reportsSources
firmwaredsl-vrx200-firmware-xdsl-a-patch05.08.01.08.01.06_05...c-1libc, dsl-vrx200-firmware-xdsl-b, bspatchpackages:pkgdata:dsl-vrx200-firmware-xdsl-a-patch, Patch which between the Annex A and Annex B firmware to create the Annex A firmware.

234kB233kBOpenWrt teampackages:pkgdata:dsl-vrx200-firmware-xdsl-a-patch, Bug reportspackages:pkgdata:dsl-vrx200-firmware-xdsl-a-patch, Sources
firmwaredsl-vrx200-firmware-xdsl-b-patch05.08.01.08.01.06_05...c-1libc, dsl-vrx200-firmware-xdsl-a, bspatchpackages:pkgdata:dsl-vrx200-firmware-xdsl-b-patch, Patch which between the Annex A and Annex B firmware to create the Annex B firmware.

248kB248kBOpenWrt teampackages:pkgdata:dsl-vrx200-firmware-xdsl-b-patch, Bug reportspackages:pkgdata:dsl-vrx200-firmware-xdsl-b-patch, Sources
 
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2022/01/10 15:49
  • by sorcun