Search

You can find the results of your search below.

OpenSSL benchmarks @docs:guide-user:perf_and_log
192 Hits, Last modified:
| TP-Link Archer C2600 ... | TP-Link Archer C2600 ... | [[toh:tp-link:archer_c6u_v1_eu|TP-Link Archer C6U v1]] | MIPS 1004Kc V2.... | TP-Link Archer C6 v2
ISP Configurations @docs:guide-user:network:wan
28 Hits, Last modified:
g is an example configuration working on an [[toh:tp-link:archer_c7|TP-Link Archer C7]]: <code> config interface 'wan' option ... ir. === ADSL2(+) === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremen... /code> === VDSL2 === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremen... idge mode * VLAN: 835 Example configuration on TP-Link TD-W8980B / TD-9980B. IPTV is plugged in port 'LA
B.A.T.M.A.N. / batman-adv @docs:guide-user:network:wifi:mesh
27 Hits, Last modified:
rovide bridging of multiple VLANs over a mesh (or link), such as for "trusted" client, guest, IoT, and m... nwrt-18.06'' and ''master'' in September, 2018 on Archer C7v2 units running the non-CT firmware (see note ... lower latency, and/or reliability of an Ethernet link will make up for this effect. ===== Installation... tps://github.com/openwrt/openwrt/commit/49cc712b44c76e99bfb716c06700817692975e05|As of September 2019]
Build system usage @docs:guide-developer:toolchain
13 Hits, Last modified:
]: For example if you are flashing for the [[toh:tp-link:archer_c7]] you can locate on its wiki page the factory fir... th79/generic/openwrt-21.02.1-ath79-generic-tplink_archer-c7-v2-squashfs-factory.bin 'ath79' tells you the Target, 'generic' tells you the Subtarget while 'archer-c7-v2' tells you the Target profile for the very spe... ms. E.g. to select and save the target for [[toh:tp-link:tl-wr841n|TL-WR841N v11]] Wi-Fi router: - Targe
Switch documentation @docs:guide-user:network:vlan
7 Hits, Last modified:
so look at the Wiki for your specific device. The TP-Link Archer C7 has eth0 = WAN, and eth1 = LAN (the 4 switch port... ur router. Every router is different. The popular TP-Link WDR4300 only has eth0. ===== UCI config, swconfi... 'swconfig dev <switch_interface_name> show | grep link'' or see [[docs:techref:swconfig]] ==== Assumpti