Search

You can find the results of your search below.

Fulltext results:

OpenSSL benchmarks @docs:guide-user:perf_and_log
231 Hits, Last modified:
| TP-Link Archer C2600 ... | TP-Link Archer C2600 ... | [[toh:tp-link:archer_c6u_v1_eu|TP-Link Archer C6U v1]] | MIPS 1004Kc V2.... | TP-Link Archer C6 v2
ISP Configurations @docs:guide-user:network:wan
37 Hits, Last modified:
g is an example configuration working on an [[toh:tp-link:archer_c7|TP-Link Archer C7]]: <code> config interface 'wan' option ... ir. === ADSL2(+) === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremen... /code> === VDSL2 === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremen... idge mode * VLAN: 835 Example configuration on TP-Link TD-W8980B / TD-9980B. IPTV is plugged in port 'LA
B.A.T.M.A.N. / batman-adv @docs:guide-user:network:wifi:mesh
34 Hits, Last modified:
nwrt-18.06'' and ''master'' in September, 2018 on Archer C7v2 units running the non-CT firmware (see note abo... ed here, an ad-hoc (IBSS) mesh, or point-to-point links can also be utilized. Note that use of Ethernet links with their typical MTU of 1500 will reduce the P... lower latency, and/or reliability of an Ethernet link will make up for this effect. ===== Installation
Switch documentation @docs:guide-user:network:vlan
8 Hits, Last modified:
so look at the Wiki for your specific device. The TP-Link Archer C7 has eth0 = WAN, and eth1 = LAN (the 4 switch port... ur router. Every router is different. The popular TP-Link WDR4300 only has eth0. ===== UCI config, swconfi... 'swconfig dev <switch_interface_name> show | grep link'' or see [[docs:techref:swconfig]] ==== Assumpti