Search

You can find the results of your search below.

Fulltext results:

ISP Configurations @docs:guide-user:network:wan
104 Hits, Last modified:
g is an example configuration working on an [[toh:tp-link:archer_c7|TP-Link Archer C7]]: <code> config interface 'wan' option ... ir. === ADSL2(+) === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremen... /code> === VDSL2 === The following was tested on TP-Link TD-W8980 OpenWRT v22.03.4, using "MojaTV povremen... idge mode * VLAN: 835 Example configuration on TP-Link TD-W8980B / TD-9980B. IPTV is plugged in port 'LA
B.A.T.M.A.N. / batman-adv @docs:guide-user:network:wifi:mesh
75 Hits, Last modified:
nwrt-18.06'' and ''master'' in September, 2018 on Archer C7v2 units running the non-CT firmware (see note abo... sic'' as it conflicts with ''wpad-mesh-*''. [[https://github.com/openwrt/openwrt/commit/49cc712b44c76e99bfb716c06700817692975e05|As of September 2019]... Once applied, ''mesh0'' should be seen in the output of ''ip link''. <code> 8: mesh0: <BROADCAST,MULTICAST,UP,LOW... figuration done, you should see ''bat0'' in the output of ''ip link''. The output of ''batctl o'' and/or ''batctl n''
Switch documentation @docs:guide-user:network:vlan
8 Hits, Last modified:
so look at the Wiki for your specific device. The TP-Link Archer C7 has eth0 = WAN, and eth1 = LAN (the 4 switch port... ur router. Every router is different. The popular TP-Link WDR4300 only has eth0. ===== UCI config, swconfi... 'swconfig dev <switch_interface_name> show | grep link'' or see [[docs:techref:swconfig]] ==== Assumpti