User Tools

Site Tools


toh:zyxel:zyxel_keenetic_omni_rev._a

ZyXEL Keenetic Omni Rev. A

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

FIXME

Getting started with a new Device Page

  1. This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
  2. There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
  3. When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.

Keep the articles modular

  • Please include only model specific information, omit bla,bla and put everything generic into separate articles
  • If you have no time to write certain stuff, link to docs
  • base-system should lead the way, do not explain this again
  • DO NOT provide a complete howto here! Instead groom the general documentation.

Supported Versions

Hardware Highlights

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
Keenetic OmniRev. AMediaTek MT7620N580864MediaTek MT7620Nb/g/n-5--1x 2.0

Installation

Flash Layout

Layer0 raw flash 8192 KiB
Layer1 mtd0 u-boot 192 KiB mtd1 u-boot-env 64 KiB mtd2 factory 64 KiB mtd3 firmware 7872 KiB
Layer2 mtd4 kernel 1403,61 KiB mtd5 rootfs 6468,39 KiB
Layer3 2412,39 KiB mtd6 rootfs_data 4056 KiB

OEM easy installation

  1. Use a PC to browse to http://my.keenetic.net.
  2. Go to the System section and open the Files tab.
  3. Under the Files tab, there will be a list of system files. Click on the Firmware file.
  4. When a modal window appears, click on the Choose File button and upload the firmware image.
  5. Wait for the router to flash and reboot.
  6. Telnet to 192.168.1.1 and set a root password or browse to http://192.168.1.1 if LuCI is installed.

OEM installation using the TFTP method

  1. Download the latest firmware image and rename it to komni_recovery.bin.
  2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the firmware image to the root directory of the server.
  3. Power off the router and use a twisted pair cable to connect the PC to any of the router's LAN ports.
  4. Configure the network adapter of the PC to use IP address 192.168.1.2 and subnet mask 255.255.255.0.
  5. Power up the router while holding the reset button pressed.
  6. Wait approximately for 5 seconds and then release the reset button.
  7. The router should download the firmware via TFTP and complete flashing in a few minutes.
  8. After flashing is complete, use the PC to browse to http://192.168.1.1 and proceed with the configuration.

Specific values needed for tftp

Required Tftp server IP address 192.168.1.2
Firmware image Firmware image must be renamed to komni_recovery.bin

Upgrading OpenWrt

Debricking

Failsafe mode

Basic configuration

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Specific Configuration

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Network interfaces

The default network configuration is:

Interface Name Description Default configuration
br-lan EXAMPLE LAN & WiFi EXAMPLE 192.168.1.1/24
vlan0 (eth0.0) EXAMPLE LAN ports (1 to 4) EXAMPLE None
vlan1 (eth0.1) EXAMPLE WAN port EXAMPLE DHCP
wl0 EXAMPLE WiFi EXAMPLE Disabled

Switch Ports (for VLANs)

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port Switch port
Internet (WAN) EXAMPLE 4
LAN 1 EXAMPLE 3
LAN 2 EXAMPLE 2
LAN 3 EXAMPLE 1
LAN 4 EXAMPLE 0

Buttons

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

The ZyXEL Keenetic Omni has the following buttons:

BUTTON Event
Failsafe Mode failsafe
Power power
Reset reset
Wi-Fi On/Off rfkill

Hardware

Info

General
Brand ZyXEL
Model Keenetic Omni
Versions Rev. A
Device Type WiFi Router
Availability unknown 2018
Comments - general
OpenWrt Support
Supported Since Revision
Supported Since Release 17.01.0
Supported Current Release 18.06.4
Unsupported
Hardware
Instruction set ¿
Sub Instruction Set ¿
Bootloader U-Boot
Target ramips
System-On-Chip
CPU MHz 580
Flash MB 8
RAM MB 64
Network
Ethernet 100M ports 5
Ethernet Gbit ports -
Switch MediaTek MT7620N
Modem -
VLAN Yes
Comments - network ports
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz -
WLAN Hardware MediaTek MT7620N
Detachable Antennas -
Comments - WLAN
Interfaces
USB ports 1x 2.0
SATA ports -
Serial Yes
JTAG ¿
Comments - USB & SATA ports
Misc
LED count 9
Button count 2
Power supply 12 VDC, 1.0 A
Links
Forum Topic URL
WikiDevi URL
OEM device homepage URL https://keenetic.com/ru/zyxel-keenetic-omni
Firmware OEM Stock URL https://help.keenetic.com/hc/article_attachments/115009962689/Keenetic-Omni-V2.07(AAKU.0)C5.zip
Firmware OpenWrt Install URL http://downloads.openwrt.org/releases/18.06.4/targets/ramips/mt7620/openwrt-18.06.4-ramips-mt7620-kn_rc-squashfs-factory.bin
Firmware OpenWrt Upgrade URL http://downloads.openwrt.org/releases/18.06.4/targets/ramips/mt7620/openwrt-18.06.4-ramips-mt7620-kn_rc-squashfs-sysupgrade.bin
Edit the underlying data View/Edit data

Photos

Back:

Side:

Backside label:

Opening the case

Note: This will void your warranty!

Turn the router upside-down and unstick two round rubber caps that cover screws. Use a cross-head screwdriver to remove the two screws. Then turn the router over back to its normal position and remove the top plastic cover. Unfortunately, there seems to be no way to do this without damaging at least some of the fasteners. However, due to the design of the case broken fasteners do not cause any trouble after reassembly.

Main PCB:

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the serial port of this specific device:

Serial connection parameters 57600, 8N1

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootlogs

OEM bootlog

U-Boot 1.1.3 (May 14 2013 - 14:54:15) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb4000 enable ephy clock...done. SSC disabled. Firmware test register status: 0x00000000 spi_wait_nsec: 29 spi device id: ef 40 17 0 0 (40170000) find flash: W25Q64BV ============================================ Ralink UBoot Version: 4.0.0.2_NDMS -------------------------------------------- ASIC 7620_MP (Port5<->None) DRAM component: 512 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 64 MBytes Flash component: SPI Flash Date:May 14 2013 Time:14:54:15 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 580 MHZ #### estimate memory size = 64 Mbytes Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. You choosed 3 0 3: System Boot system code via Flash. ## Booting image at bc050000 ... Image Name: ZyXEL Keenetic Omni Created: 2017-10-19 15:56:15 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1111530 Bytes = 1.1 MB Load Address: 80000000 Entry Point: 8026b750 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 8026b750) ... ## Giving linux memsize in MB, 64 Starting kernel ... LINUX started... Linux version 3.4.112 (developers@ndmsystems.com) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-ndm-8 - NDMS Toolkit 1.0.0) 7 MediaTek SoC: MT7620N, RevID: 0203, RAM: DDR1, XTAL: 20MHz CPU/OCP/SYS frequency: 580/193/193 MHz CPU revision is: 00019650 (MIPS 24KEc) Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00004000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000000 -> 0x00004000 Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS0,57600n8 rdinit=/sbin/init root=/dev/mtdblock4 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Writing ErrCtl register=0006fae5 Readback ErrCtl register=0006fae5 Memory: 61664k/65536k available (2502k kernel code, 3872k reserved, 496k data, 200k init, 0k highmem) NR_IRQS:40 console [ttyS0] enabled Calibrating delay loop... 385.02 BogoMIPS (lpj=770048) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 NET: Registered protocol family 16 bio: create slab <bio-0> at 0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 120 io scheduler noop registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A Registering NDM partitions parser Ralink SPI flash driver, SPI clock: 48MHz SPI flash chip: W25Q64BV (ef 40170000) (8192 Kbytes) Current flash size = 0x800000 Found kernel at offset 0x50000 Found rootfs at offset 0x180000 10 ndmpart partitions found on MTD device raspi Creating 10 MTD partitions on "raspi": 0x000000000000-0x000000030000 : "U-Boot" 0x000000030000-0x000000040000 : "U-Config" 0x000000040000-0x000000050000 : "RF-EEPROM" 0x000000050000-0x000000180000 : "Kernel" 0x000000180000-0x0000006f0000 : "RootFS" mtd: device 4 (RootFS) set to be root filesystem 0x000000050000-0x0000006f0000 : "Firmware" 0x0000006f0000-0x000000700000 : "Config" 0x000000700000-0x000000800000 : "Storage" 0x000000050000-0x000000800000 : "Backup" 0x000000000000-0x000000800000 : "Full" tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 nf_conntrack version 0.5.0 (16384 buckets, 32768 max) xt_time: kernel timezone is -0000 Bridge firewalling registered ubridge: Tiny bridge driver, 1.1 IPv4 over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered sbcore: registered new interface driver ftdi_sio [32mndm: SB Serial support registered for FTDI USB Serial Device mCore::System::Dftdi_sio: v1.6.0:USB FTDI Serial Converters Driver riverManager: loading /lib/modules/3.4.112/ipt_Rehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver OUTE.ko.02.1Q VLAN Support v1.8 [I] Jan 1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/nf_conntrack_ftp.ko. [I] Jan 1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/xt_length.ko. [I] Jan 1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/mbcache.ko. [I] Jan 1 00:00:05 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/phr.ko.^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^. sbcore: registered new interface driver cdc_acmetherontrollers console. [0mS0: 18 input overrun(s)m: new USB bus registered, assigned bus number 1^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^* cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters0)C5. [I] Jan 1 00:00:09 ndm: Core::System:Initializing USB Mass Storage driver... :DriverManager: usbcore: registered new interface driver usb-storagember 2 loading /lib/modUSB Mass Storage support registered.00loading /lib/modules/3.4.112/nf_nat_proto_gre.ko. ules/3.4.112/ohci-hcd.ko.inux 3.4.112 ehci_hcdanager: loading /lib/modules/3.4.112/usb-common.ko. Tuxera HFS+ driver 3016.7.4i-platform usbcore: registered new interface driver kalmianager: loading /lib/modules/3.4.112/cdc-wdm.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/sd_mod.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/dm9601.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/usblp.ko.o. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/cdc-acm.ko.c.ko. USB extras loadedub 2-0:1.0: USB hub foundl2303nager: loadFast NAT loaded [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/usb-storage.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/nls_cp1251.ko.roto_gre.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/thfsplus.ko.usbcore: registered new interface drm loading /lib/modules/3.4.112/plusbcore: registered new interface driver usblp.112/pppol2tp.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lusbcore: registered new interface driver option ib/modules/3.4.1USB Serial support registered for GSM modem (1-port)odules/3.4.112/tntfs.ko.ko. 12/kalmia.ko.:00:06 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/nls_cp866.ko. [I] Jan 1 0usbcore: registered new interface driver asixding /lib/modules/3.4.112/nf_nat_sip.ko.o. 0:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/nls_utf8.ko.tfat.ko._wdg.ko. [I] Jan 1 00:00:09 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/usbextras.ko. usbcore: registered new interface driver huawei_cdc_ncmoading /lib/modules/3.4.112/usbnet.ko. ttyS0: 25 input overrun(s)ore::System::DriverManager: loading /lib/modules/3.4.112/sg.ko.ment.ko. usbcore: registered new interface driver cdc_etherer: loading /lib/modules/3.4.112/sierra.ko.oc.koTuxera NTFS driver 3016.3.7.1_1 [. [I] Jan 1 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/usb_wwan.ko. [I] Jan 1 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/cdc_ncm.ko.. usbcore: registered new interface driver rndis_hostr: loading /lib/modules/3.4.112/cdrom.ko. [I] Jan 1 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/option.ko.ck_pptp.ko. [I] Jan 1 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/asix.ko.ko. [I] Jan 1 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/huawei_cdc_ncm.ko. [I] Jan 1 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/cdc_ether.ko. [I] Jan 1 00:00:10 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/rndis_host.ko. rtsoc_eth: Ethernet switch driver for Ralink SoCs rtsoc_eth: (C) 2016, NDM Systems Inc., v1.1.29hu Oct 19 17:52:29 MSK 2017 mips rtsoc_eth: MT7620 SoC, TX/RX buffers: 512/512, poll budget 32 rtsoc_eth: 28:28:5d:8d:64:cc address assigned to eth2 rtsoc_eth: MT7620 switch initializederra USB modem [I] Jan 1 00:00:10 ndm: FileSystem::Temp: mounting /var/...g /lib/modules/3.4.112/nf_nat_ftp.ko. [I] Jan 1 00:00:10 ndm: FileSystem::Storage: mounting "/storage"...odules/3.4.112/ehci-hcd.ko. [I] Jan 1 00:00:10 ndm: Core::Authenticator: MD5 generator created. [I] Jan 1 00:00:10 ndm: Core::Authenticator: NT generator created. [I] Jan 1 00:00:10 ndm: Core::Authenticator: "readonly" tag registered. [I] Jan 1 00:00:10 ndm: Core::System::Timezone: building a timezone list... [I] Jan 1 00:00:10 ndm: Core::System::Timezone: scanning done, 138 timezone available. [I] Jan 1 00:00:11 ndm: Ntp::Client: configuration reset. [I] Jan 1 00:00:11 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/rtsoc_eth.ko. [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0": interface is down. [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/0": interface is up. [I] Jan 1 00:00:11 ndm: Network::Interntc: NDM traffic control module v2.0.13 face::Base: "FastEthernet0/0": renamed to "0". [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/1": interface is up. [ttyS0: 9 input overrun(s) I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/1": renamed to "1". [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/2": interface is up. [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/2": renamed to "2". [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/3": interface is up. [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/3": renamed to "3". [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/4": interface is up. [I] Jan 1 00:00:11 ndm: Network::Interface::Base: "FastEthernet0/4": renamed to "4". [I] Jan 1 00:00:11 ndm: Network::Interface::Mac: backed up the default address 28:28:5d:8d:64:cc of "FastEthernet0" before changin. [I] Jan 1 00:00:11 ndm: Core::Authenticator: "printers" tag registered. [I] Jan 1 00:00:11 ndm: Core::Authenticator: "cifs" tag registered. [I] Jan 1 00:00:11 ndm: Cloud::Agent: "cloud" component registered. [I] Jan 1 00:00:11 ndm: Cloud::Agent: "control" component registered. Waiting for Wireless Events from interfaces... [I] Jan 1 00:00:11 ndm: Core::Authenticator: "ftp" tag registered. [I] Jan 1 00:0MT76x2 AP Driver version: 3.0.5.0 0:11 ndm: Core::Authenticator: "http" tag registered. [I] Jan 1 00:00:11 ndm: PingCheck::Profile: profile "default" add host "google.com" for testing. [I] Jan 1 00:00:11 ndm: PingCheck::Profile: profile "default" add host "yahoo.com" for testing. [I] Jan 1 00:00:11 ndm: PingCheck::Profile: profile "default" add host "facebook.com" for testing. [I] Jan 1 00:00:11 ndm: PingCheck::Profile: profile "default" update interval is changed to 10 seconds. [I] Jan 1 00:00:11 ndm: PingCheck::Profile: profile "default" uses connect mode. [I] Jan 1 00:00:11 ndm: PingCheck::Profile: profile "default" uses port 443 for testing. [I] Jan 1 00:00:11 ndm: Core::Authenticator: "torrent" tag registered. [I] Jan 1 00:00:11 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/ntc.ko. [I] Jan 1 00:00:11 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/mt76x2_ap.ko. [I] Jan 1 00:00:12 ndm: Network::Interface::Rtx::WifiMaster: channel bandwidth settings reset to default. [I] Jan 1 00:00:13 ndm: Network::Interface::Radio: the radio switch state is changed to off, software state is down [WifiMaster0]. [I] Jan 1 00:00:13 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint2": interface is down. [I] Jan 1 00:00:13 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint1": interface is down. [I] Jan 1 00:00:13 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint0": interface is down. [I] Jan 1 00:00:13 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint3": interface is down. [I] Jan 1 00:00:13 ndm: Network::Interface::IP: "WifiMaster0/AccessPoint2": security level set to "private". [I] Jan 1 00:00:14 ndm: Network::Interface::Base: "WifiMaster0/WifiStation0": interface is down. [I] Jan 1 00:00:14 ndm: Network::Interface::IP: "WifiMaster0/AccessPoint1": security level set to "private". [I] Jan 1 00:00:14 ndm: Module::Manager: loaded 34 modules. [W] Jan 1 00:00:14 ndm: Core::Configurator: startup configuration file does not exist, trying factory default. [I] Jan 1 00:00:14 ndm: FileSystem::Proc: system setting saved. [I] Jan 1 00:00:14 ndm: Core::Syslog: last message repeated 13 times. [I] Jan 1 00:00:14 ndm: Core::System::Hostname: the host name set. [I] Jan 1 03:00:14 ndm: Core::System::Clock: timezone is set to "Europe/Moscow". [I] Jan 1 03:00:14 ndm: Core::System::Domainname: the system domain name set. [I] Jan 1 03:00:14 ndm: Ntp::Client: server "0.pool.ntp.org" has been added. [I] Jan 1 03:00:14 ndm: Ntp::Client: server "1.pool.ntp.org" has been added. [I] Jan 1 03:00:14 ndm: Ntp::Client: server "2.pool.ntp.org" has been added. [I] Jan 1 03:00:14 ndm: Ntp::Client: server "3.pool.ntp.org" has been added. [I] Jan 1 03:00:14 ndm: Network::Interface::IP: "WifiMaster0/AccessPoint3": security level set to "private". [I] Jan 1 03:00:14 ndm: Network::Interface::Radio: the radio switch state is changed to on, software state is down [WifiMaster0]. [I] Jan 1 03:00:14 ndm: Command::LogResponse: applied. [W] Jan 1 03:00:14 ndm: Command::LogResponse: command obsoleted by "interface Switch0/4 switchport mode access". [I] Jan 1 03:00:14 ndm: Network::Interface::Switch: "FastEthernet0/4": access mode enabled. [W] Jan 1 03:00:14 ndm: Command::LogResponse: command obsoleted by "interface Switch0/4 switchport access". [I] Jan 1 03:00:14 ndnproxy: ndnproxy 1.2.2b11 started. [I] Jan 1 03:00:14 ndnproxy: PID file: /var/ndnproxymain.pid. [I] Jan 1 03:00:14 ndnproxy: stats. file: /var/ndnproxymain.stat. [I] Jan 1 03:00:14 ndm: Network::Interface::Switch: "FastEthernet0/4": set access VLAN ID: 1. [W] Jan 1 03:00:14 ndm: Command::LogResponse: command obsoleted by "interface Switch0/3 switchport mode access". [I] Jan 1 03:00:14 ndm: Network::Interface::Switch: "FastEthernet0/3": access mode enabled. [W] Jan 1 03:00:14 ndm: Command::LogResponse: command obsoleted by "interface Switch0/3 switchport access". [I] Jan 1 03:00:15 ndm: Network::Interface::Switch: "FastEthernet0/3": set access VLAN ID: 1. [W] Jan 1 03:00:15 ndm: Command::LogResponse: command obsoleted by "interface Switch0/2 switchport mode access". [I] Jan 1 03:00:15 ndm: Network::Interface::Switch: "FastEthernet0/2": access mode enabled. [W] Jan 1 03:00:15 ndm: Command::LogResponse: command obsoleted by "interface Switch0/2 switchport access". [I] Jan 1 03:00:15 ndm: Network::Interface::Switch: "FastEthernet0/2": set access VLAN ID: 1. [W] Jan 1 03:00:15 ndm: Command::LogResponse: command obsoleted by "interface Switch0/1 switchport mode access". [I] Jan 1 03:00:15 ndm: Network::Interface::Switch: "FastEthernet0/1": access mode enabled. [W] Jan 1 03:00:15 ndm: Command::LogResponse: command obsoleted by "interface Switch0/1 switchport access". [I] Jan 1 03:00:15 ndm: Network::Interface::Switch: "FastEthernet0/1": set access VLAN ID: 1. [W] Jan 1 03:00:15 ndm: Command::LogResponse: command obsoleted by "interface Switch0/0 switchport mode access". [I] Jan 1 03:00:15 ndm: Network::Interface::Switch: "FastEthernet0/0": access mode enabled. [I] Jan 1 03:00:17 ndm: Network::Interface::Base: "FastEthernet0": interface is up. [I] Jan 1 03:00:17 ndm: Network::Interface::Base: "FastEthernet0/Vlan1": interface is down. [I] Jan 1 03:00:17 ndm: Network::Interface::Base: "FastEthernet0/Vlan1": interface is down. [I] Jan 1 03:00:17 ndm: Network::Interface::Repository: created interface Switch0/VLAN1. [I] Jan 1 03:00:18 ndm: Network::Interface::Base: "FastEthernet0/Vlan1": description saved. [I] Jan 1 03:00:18 ndm: Network::Interface::IP: "FastEthernet0/Vlan1": IP address is 192.168.1.1/24. [I] Jan 1 03:00:18 ndm: Network::Interface::IP: "FastEthernet0/Vlan1": security level set to "private". [I] Jan 1 03:00:18 ndm: Network::Interface::Base: "FastEthernet0/Vlan1": interface is up. [I] Jan 1 03:00:18 ndm: Network::Interface::Base: "FastEthernet0/Vlan2": interface is down. [I] Jan 1 03:00:18 ndm: Network::Interface::Base: "FastEthernet0/Vlan2": interface is down. [I] Jan 1 03:00:18 ndm: Network::Interface::Repository: created interface Switch0/VLAN2. device eth2 entered promiscuous mode ttyS0: 2 input overrun(s) [I] Jan 1 03:00:19 ndm: Network::Interface::Base: "FastEthernet0/Vlan2": renamed to "ISP". [I] Jan 1 03:00:19 ndm: Network::Interface::Base: "FastEthernet0/Vlan2": description saved. [I] Jan 1 03:00:19 ndm: Dhcp::Client: started DHCP client on Switch0/VLAN2. [I] Jan 1 03:00:19 ndm: Network::Interface::IP: "FastEthernet0/Vlan2": global priority is 700. [I] Jan 1 03:00:19 ndm: Network::Interface::IP: "FastEthernet0/Vlan2": security level set to "public". [I] Jan 1 03:00:19 ndm: Network::Interface::Base: "FastEthernet0/Vlan2": interface is up. [I] Jan 1 03:00:19 ndm: Network::Interface::Base: "Bridge0": interface is down. [I] Jan 1 03:00:19 ndm: Network::Interface::Base: "Bridge0": interface is up. [I] Jan 1 03:00:19 ndm: Network::Interface::Repository: created interface Bridge0. device eth2.1 entered promiscuous mode br0: port 1(eth2.1) entered forwarding state br0: port 1(eth2.1) entered forwarding state ttyS0: 2 input overrun(s) ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [I] Jan 1 03:00:20 ndm: Network::Interface::Base: "Bridge0": renamed to "Home". [I] Jan 1 03:00:20 ndm: Network::Interface::Base: "Bridge0": description saved. [I] Jan 1 03:00:21 ndm: Network::Interface::IP: "Bridge0": security level set to "private". [I] Jan 1 03:00:21 ndm: Network::Interface::Base: "Bridge0": interface is up. [I] Jan 1 03:00:21 ndm: Network::Interface::Mac: backed up the default address 82:dc:4e:a0:26:15 of "Home" before changing. [I] Jan 1 03:00:21 ndm: Network::Interface::IP: "FastEthernet0/Vlan1": IP address cleared. [I] Jan 1 03:00:21 ndm: Network::Interface::IP: "Bridge0": IP address is 192.168.1.1/24. [I] Jan 1 03:00:21 ndm: Network::Interface::IP: "Bridge0": interface is non-global. [I] Jan 1 03:00:21 ndm: kernel: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [I] Jan 1 03:00:21 ndm: Network::Interface::Bridge: Switch0/VLAN1 inherited in Bridge0. [I] Jan 1 03:00:21 ndm: Dhcp::Pool: pool "_WEBADMIN" range has been saved. [I] Jan 1 03:00:21 ndm: Dhcp::Server: pool "_WEBADMIN" bound to interface Home. [I] Jan 1 03:00:21 ndm: Command::LogResponse: NAT rule added. [I] Jan 1 03:00:21 ndm: Core::Authenticator: user "admin" tagged with "cli". [I] Jan 1 03:00:21 ndm: Core::Authenticator: user "admin" tagged with "http". [I] Jan 1 03:00:21 ndm: Dhcp::Server: service enabled. [I] Jan 1 03:00:21 ndm: Dns::Manager: DNS proxy enabled. [I] Jan 1 03:00:21 ndm: Http::Manager: HTTP service was enabled. [I] Jan 1 03:00:21 ndm: Telnet::Server: telnet server enabled. [I] Jan 1 03:00:21 ndm: Ntp::Client: NTP client enabled. [I] Jan 1 03:00:21 ndm: Core::Authenticator: user "admin" tagged with "ftp". [I] Jan 1 03:00:21 ndm: UPnP::Manager: using LAN interface: Bridge0. [I] Jan 1 03:00:21 ndm: Core::Authenticator: password has been set for user "admin". [I] Jan 1 03:00:21 ndm: Core::Authenticator: user "admin" tagged with "cifs". [I] Jan 1 03:00:21 ndm: Core::Authenticator: user "admin" tagged with "printers". [I] Jan 1 03:00:21 ndm: Command::LogResponse: CIFS server enabled. [I] Jan 1 03:00:21 ndm: TrafficControl::Manager: "WifiMaster0/AccessPoint1" interface rate limited to 5000 kbit/s. [I] Jan 1 03:00:21 ndm: Command::LogResponse: country code set. [I] Jan 1 03:00:21 ndm: Command::LogResponse: compatibility set. [I] Jan 1 03:00:21 ndm: Network::Interface::Base: "WifiMaster0": interface is up. [I] Jan 1 03:00:21 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint0": renamed to "AccessPoint". [I] Jan 1 03:00:21 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint0": description saved. [I] Jan 1 03:00:21 ndm: Network::Interface::IP: "WifiMaster0/AccessPoint0": security level set to "private". [I] Jan 1 03:00:21 ndm: Network::Interface::Rtx::Wps: "WifiMaster0/AccessPoint0": WPS enabled. [I] Jan 1 03:00:21 ndm: Command::LogResponse: WMM extensions enabled. br0: port 1(eth2.1) entered forwarding state ttyS0: 5 input overrun(s) device ra0 entered promiscuous mode br0: port 2(ra0) entered forwarding state br0: port 2(ra0) entered forwarding state br0: port 2(ra0) entered disabled state br0: port 1(eth2.1) entered disabled state br0: port 2(ra0) entered forwarding state br0: port 2(ra0) entered forwarding state br0: port 1(eth2.1) entered forwarding state br0: port 1(eth2.1) entered forwarding state [I] Jan 1 03:00:22 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint0": interface is up. [I] Jan 1 03:00:22 ndm: kernel: br0: port 1(eth2.1) entered forwarding state [I] Jan 1 03:00:22 ndm: Network::Interface::Bridge: WifiMaster0/AccessPoint0 included in Bridge0. [I] Jan 1 03:00:22 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint1": renamed to "GuestWiFi". [I] Jan 1 03:00:22 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint1": description saved. [I] Jan 1 03:00:22 ndm: Command::LogResponse: SSID saved. [I] Jan 1 03:00:22 ndm: Command::LogResponse: WMM extensions enabled. [I] Jan 1 03:00:22 ndm: Network::Interface::Base: "WifiMaster0/AccessPoint1": interface is down. [I] Jan 1 03:00:22 ndm: Network::Interface::Base: "FastEthernet0/Vlan3": interface is down. [I] Jan 1 03:00:22 ndm: Network::Interface::Base: "FastEthernet0/Vlan3": interface is down. [I] Jan 1 03:00:22 ndm: Network::Interface::Repository: created interface Switch0/Vlan3. br0: port 2(ra0) entered forwarding state ttyS0: 11 input overrun(s) br0: port 1(eth2.1) entered forwarding state [I] Jan 1 03:00:23 ndm: Ntp::Client: unable to communicate with "1.pool.ntp.org". [I] Jan 1 03:00:23 ndm: Ntp::Client: could not synchronize, waiting... [I] Jan 1 03:00:23 ndm: Network::Interface::Base: "FastEthernet0/Vlan3": description saved. [I] Jan 1 03:00:23 ndm: Network::Interface::Base: "FastEthernet0/Vlan3": interface is up. [I] Jan 1 03:00:23 ndm: Network::Interface::Base: "Bridge1": interface is down. [I] Jan 1 03:00:23 ndm: Network::Interface::Base: "Bridge1": interface is up. [I] Jan 1 03:00:23 ndm: Network::Interface::Repository: created interface Bridge1. device eth2.3 entered promiscuous mode br1: port 1(eth2.3) entered forwarding state br1: port 1(eth2.3) entered forwarding state ttyS0: 3 input overrun(s) device ra1 entered promiscuous mode br1: port 1(eth2.3) entered disabled state br1: port 1(eth2.3) entered forwarding state br1: port 1(eth2.3) entered forwarding state [I] Jan 1 03:00:24 ndm: Network::Interface::Base: "Bridge1": renamed to "Guest". [I] Jan 1 03:00:24 ndm: Network::Interface::Base: "Bridge1": description saved. [I] Jan 1 03:00:24 ndm: Network::Interface::Base: "Bridge1": interface is up. [I] Jan 1 03:00:24 ndm: Network::Interface::Mac: backed up the default address 32:a7:f8:fa:92:d4 of "Guest" before changing. [I] Jan 1 03:00:24 ndm: Network::Interface::IP: "Bridge1": interface is non-global. [W] Jan 1 03:00:24 ndm: kernel: ttyS0: 3 input overrun(s) [I] Jan 1 03:00:24 ndm: Network::Interface::Bridge: Switch0/Vlan3 inherited in Bridge1. [I] Jan 1 03:00:24 ndm: kernel: br1: port 1(eth2.3) entered forwarding state [I] Jan 1 03:00:24 ndm: Network::Interface::Bridge: WifiMaster0/AccessPoint1 included in Bridge1. [I] Jan 1 03:00:24 ndm: Network::Interface::IP: "Bridge1": security level set to "protected". [I] Jan 1 03:00:24 ndm: Network::Interface::IP: "Bridge1": IP address is 10.1.30.1/24. [I] Jan 1 03:00:24 ndm: TrafficControl::Manager: "Bridge1" interface rate limited to 5120 kbit/s. [I] Jan 1 03:00:24 ndm: Dhcp::Pool: pool "_WEBADMIN_GUEST_AP" range has been saved. [I] Jan 1 03:00:24 ndm: Dhcp::Server: pool "_WEBADMIN_GUEST_AP" bound to interface Guest. [I] Jan 1 03:00:25 telnetd: waiting for connections... [I] Jan 1 03:00:25 ndm: Command::LogResponse: NAT rule added. [I] Jan 1 03:00:25 ndm: Igmp::Proxy: upstream role assigned to ISP. NQND: server is ready [I] Jan 1 03:00:25 ndhcps: _WEBADMIN: NDM DHCP server (version 3.1.11) started. [I] Jan 1 03:00:25 ndm: Igmp::Proxy: added downstream interface Home. [I] Jan 1 03:00:25 ndmr1: port 1(eth2.3) entered forwarding state 0m: Igmp::Proxy: IGMP proxy enabled. [I] Jan 1 03:00:25 ndm: Core::Authenticator: user "admin" tagged with "torrent". [I] Jan 1 03:00:25 ndm: Core::Hotplug::Manager: scanning hardwttyS0: 8 input overrun(s) are... [I] Jan 1 03:00:25igmpsn: IGMP switch snooping module (C) 2015, 2016 NDM Systems Inc., v4.0.33 ndm: Network::Interface::Switch: switch link up at port 1 (FastEthernet0/1). br0: port 2(ra0) entered disabled state [I] Jan 1 03:00:25 ndm: Core::Hotplug::Manager: scanning hardware: done. [I] Jan 1 03:00:25 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/igmpsn.ko. [I] Jan 1 03:00:25 ndm: Core::Init: system ready, core startup time is 26 seconds. br0: port 2(ra0) entered forwarding state br0: port 2(ra0) entered forwarding state ttyS0: 4 input overrun(s) Ralink/MTK HW NAT 5.0.2.0-2 Module Enabled, FoE Size: 16384 SWNAT sizeof(bind) = 196 SWNAT sizeof(hashent) = 56 SWNAT is registered SWNAT enabled SWNAT caps: L2TP, PPTP, PPPoE, IPoE, MC, USB CDC/DSL Fast VPN init, v4.0-78-5 PPPoE/IPoE LAN software acceleration is disabled PPPoE/IPoE UDP LAN software acceleration is enabled SWNAT bind table cleared [I] Jan 1 03:00:26 ndm: Core::Server: started Session 127.0.0.1:38840. [W] Jan 1 03:00:26 ndm: kernel: ttyS0: 4 input overrun(s) [I] Jan 1 03:00:26 ndm: Core::Session: client disconnected. [I] Jan 1 03:00:26 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/hw_nat.ko. [I] Jan 1 03:00:26 ndm: Core::System::DriverManager: loading /lib/modules/3.4.112/fastvpn.ko. [I] Jan 1 03:00:27 ndhcps: _WEBADMIN_GUEST_AP: NDM DHCP server (version 3.1.11) started. [I] Jan 1 03:00:27 ndm: Core::Server: startbr0: port 2(ra0) entered forwarding state ed Session 127.0.0.1:38841. [I] Jan 1 03:00:27 ndm: Core::Session: client disconnected. [I] Jan 1 03:00:27 ndm: Http::Manager: new Web server configuration was applied. [I] Jan 1 03:00:27 nimproxy: NDM IGMP/Multicast proxy (version 0.0.25) started. nginx: no NDM ACL support [I] Jan 1 03:00:31 ndhcps: _WEBADMIN: DHCPDISCOVER received for 192.168.1.69 from 50:e5:49:ce:a5:24. [I] Jan 1 03:00:31 ndhcps: _WEBADMIN: making OFFER of 192.168.1.69 to 50:e5:49:ce:a5:24. [I] Jan 1 03:00:31 ndhcps: _WEBADMIN: DHCPREQUEST received (STATE_SELECTING) for 192.168.1.69 from 50:e5:49:ce:a5:24. [I] Jan 1 03:00:31 ndhcps: _WEBADMIN: sending ACK of 192.168.1.69 to 50:e5:49:ce:a5:24. ACS result: primary channel 1, 40 MHz spectrum min dirty (with CCA) = 345 ttyS0: 14 input overrun(s) [I] Jan 1 03:00:34 wmond: WifiMaster0/AccessPoint0: (MT76x2) BSS(ra0) channel switched to 1. [E] Jan 1 03:00:34 keenetic_omni nginx: (conn: *1) open() "/usr/share/htdocs/luci-static/resources/icons/loading.gif" failed (2: N9 [I] Jan 1 03:00:35 ndm: Ntp::Client: unable to communicate with "2.pool.ntp.org". [I] Jan 1 03:00:35 ndm: Ntp::Client: could not synchronize, waiting... NQCS: server is ready [I] Jan 1 03:00:37 ndm: Cifs::ServerNQ: service started. [E] Jan 1 03:00:39 keenetic_omni nginx: (conn: *1) open() "/usr/share/htdocs/luci-static/resources/icons/loading.gif" failed (2: N9 [E] Jan 1 03:00:44 keenetic_omni nginx: Core::Syslog: last message repeated 2 times. [I] Jan 1 03:00:47 ndm: Ntp::Client: unable to communicate with "3.pool.ntp.org". [I] Jan 1 03:00:47 ndm: Ntp::Client: could not synchronize, waiting... [E] Jan 1 03:00:49 keenetic_omni nginx: (conn: *1) open() "/usr/share/htdocs/luci-static/resources/icons/loading.gif" failed (2: N9 [E] Jan 1 03:00:54 keenetic_omni nginx: (conn: *1) open() "/usr/share/htdocs/luci-static/resources/icons/loading.gif" failed (2: N9 [I] Jan 1 03:00:58 ndm: Core::Scgi::Session: redirected to: http://my.keenetic.net/#start/back=connectivity-check.ubuntu.com%2F. [I] Jan 1 03:00:59 ndm: Ntp::Client: unable to communicate with "0.pool.ntp.org". [I] Jan 1 03:00:59 ndm: Ntp::Client: could not synchronize, waiting... [E] Jan 1 03:00:59 keenetic_omni nginx: (conn: *1) open() "/usr/share/htdocs/luci-static/resources/icons/loading.gif" failed (2: N9


OpenWrt bootlog

U-Boot 1.1.3 (May 14 2013 - 14:54:15) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb4000 enable ephy clock...done. SSC disabled. Firmware test register status: 0x00000000 spi_wait_nsec: 29 spi device id: ef 40 17 0 0 (40170000) find flash: W25Q64BV ============================================ Ralink UBoot Version: 4.0.0.2_NDMS -------------------------------------------- ASIC 7620_MP (Port5<->None) DRAM component: 512 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 64 MBytes Flash component: SPI Flash Date:May 14 2013 Time:14:54:15 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 580 MHZ #### estimate memory size = 64 Mbytes Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. You choosed 3 0 3: System Boot system code via Flash. ## Booting image at bc050000 ... Image Name: MIPS OpenWrt Linux-4.14.95 Created: 2019-01-30 12:21:02 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1437230 Bytes = 1.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 64 Starting kernel ... [ 0.000000] Linux version 4.14.95 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7627-753531d)) #0 Mon Jan 28 08:54:32 2019 [ 0.000000] Board has DDR1 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7620N ver:2 eco:3 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc) [ 0.000000] MIPS: machine is ZyXEL Keenetic Omni [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] random: get_random_bytes called from 0x8042472c with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=0007ffe4 [ 0.000000] Readback ErrCtl register=0007ffe4 [ 0.000000] Memory: 60252K/65536K available (3590K kernel code, 178K rwdata, 464K rodata, 176K init, 214K bss, 5284K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [ 0.000000] systick: enable autosleep mode [ 0.000000] systick: running - mult: 214748, shift: 32 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000013] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.015471] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.087700] pid_max: default: 32768 minimum: 301 [ 0.097123] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.110141] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.129215] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.148688] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.160866] pinctrl core: initialized pinctrl subsystem [ 0.172453] NET: Registered protocol family 16 [ 0.186076] Can't analyze schedule() prologue at 8037d498 [ 0.214133] rt2880_gpio 10000600.gpio: registering 24 gpios [ 0.225157] rt2880_gpio 10000600.gpio: registering 24 irq handlers [ 0.237726] rt2880_gpio 10000638.gpio: registering 16 gpios [ 0.248714] rt2880_gpio 10000638.gpio: registering 16 irq handlers [ 0.261287] rt2880_gpio 10000688.gpio: registering 1 gpios [ 0.272099] rt2880_gpio 10000688.gpio: registering 1 irq handlers [ 0.289050] clocksource: Switched to clocksource systick [ 0.300666] NET: Registered protocol family 2 [ 0.310211] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.323980] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.336572] TCP: Hash tables configured (established 1024 bind 1024) [ 0.349340] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.360844] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.373536] NET: Registered protocol family 1 [ 0.384767] rt-timer 10000100.timer: maximum frequency is 1220Hz [ 0.397468] Crashlog allocated RAM at address 0x3f00000 [ 0.409574] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.428242] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.439733] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.469500] io scheduler noop registered [ 0.477142] io scheduler deadline registered (default) [ 0.488270] gpio-export gpio_export: 1 gpio(s) exported [ 0.498792] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.514235] console [ttyS0] disabled [ 0.521280] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [ 0.540950] console [ttyS0] enabled [ 0.540950] console [ttyS0] enabled [ 0.554771] bootconsole [early0] disabled [ 0.554771] bootconsole [early0] disabled [ 0.571350] cacheinfo: Failed to find cpu0 device node [ 0.581620] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.601249] spi spi0.0: force spi mode3 [ 0.621433] m25p80 spi0.0: s25fl064k (8192 Kbytes) [ 0.631039] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.643698] Creating 4 MTD partitions on "spi0.0": [ 0.653255] 0x000000000000-0x000000030000 : "u-boot" [ 0.664044] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.675538] 0x000000040000-0x000000050000 : "factory" [ 0.686509] 0x000000050000-0x000000800000 : "firmware" [ 1.625646] 2 uimage-fw partitions found on MTD device firmware [ 1.637478] 0x000000050000-0x0000001aee6e : "kernel" [ 1.648247] 0x0000001aee6e-0x000000800000 : "rootfs" [ 1.658983] mtd: device 5 (rootfs) set to be root filesystem [ 1.671837] 1 squashfs-split partitions found on MTD device rootfs [ 1.684213] 0x00000040a000-0x000000800000 : "rootfs_data" [ 1.696569] libphy: Fixed MDIO Bus: probed [ 1.709588] gsw: setting port4 to ephy mode [ 1.717962] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 2 link up (100Mbps/Full duplex) [ 1.736378] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver [ 1.748876] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 1.765864] rt2880_wdt 10000120.watchdog: Initialized [ 1.777345] NET: Registered protocol family 10 [ 1.790220] Segment Routing with IPv6 [ 1.797625] NET: Registered protocol family 17 [ 1.806575] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.832400] 8021q: 802.1Q VLAN Support v1.8 [ 1.856269] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 1.871319] Freeing unused kernel memory: 176K [ 1.880195] This architecture does not have kernel memory protection. [ 2.688999] random: fast init done [ 3.346981] init: Console is alive [ 3.354069] init: - watchdog - [ 5.371781] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.697204] usbcore: registered new interface driver usbfs [ 5.708306] usbcore: registered new interface driver hub [ 5.719037] usbcore: registered new device driver usb [ 5.735553] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.750230] ehci-platform: EHCI generic platform driver [ 5.771001] phy phy-usbphy.0: remote usb device wakeup disabled [ 5.782808] phy phy-usbphy.0: UTMI 16bit 30MHz [ 5.791679] ehci-platform 101c0000.ehci: EHCI Host Controller [ 5.803169] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [ 5.819080] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [ 5.840918] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [ 5.854411] hub 1-0:1.0: USB hub found [ 5.862317] hub 1-0:1.0: 1 port detected [ 5.873340] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.887219] ohci-platform: OHCI generic platform driver [ 5.897986] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [ 5.911578] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [ 5.927465] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [ 5.965572] hub 2-0:1.0: USB hub found [ 5.973536] hub 2-0:1.0: 1 port detected [ 5.985811] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 6.004334] init: - preinit - [ 7.698312] 8021q: adding VLAN 0 to HW filter on device eth0 Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3[ 7.856075] random: procd: uninitialized urandom read (4 bytes read) ] or [4] key and hit [enter] to select the debug level [ 9.669910] jffs2: notice: (386) jffs2_build_xattr_subsystem: complete building xattr subsystem, 13 of xdatum (2 unchecked, 11 orphan) and 15 of xref (11 dead, 0 orphan) found. [ 9.704181] mount_root: switching to jffs2 overlay [ 9.743620] overlayfs: upper fs does not support tmpfile. [ 9.766335] urandom-seed: Seeding with /etc/urandom.seed [ 9.900936] procd: - early - [ 9.906775] procd: - watchdog - [ 10.339724] procd: - watchdog - [ 10.346330] procd: - ubus - [ 10.581096] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.598885] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.612167] random: ubusd: uninitialized urandom read (4 bytes read) [ 10.625958] procd: - init - Please press Enter to activate this console. [ 11.126922] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.146014] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.170962] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [ 11.186963] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [ 11.204438] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.224726] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 11.300997] xt_time: kernel timezone is -0000 [ 11.385540] PPP generic driver version 2.4.2 [ 11.396810] NET: Registered protocol family 24 [ 11.435836] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [ 11.450300] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected [ 11.465749] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected [ 11.490674] kmodloader: done loading kernel modules from /etc/modules.d/* [ 12.654864] urandom_read: 5 callbacks suppressed [ 12.654874] random: jshn: uninitialized urandom read (4 bytes read) [ 22.082539] 8021q: adding VLAN 0 to HW filter on device eth0 [ 22.133014] br-lan: port 1(eth0.1) entered blocking state [ 22.143841] br-lan: port 1(eth0.1) entered disabled state [ 22.154960] device eth0.1 entered promiscuous mode [ 22.164542] device eth0 entered promiscuous mode [ 22.363061] br-lan: port 1(eth0.1) entered blocking state [ 22.373878] br-lan: port 1(eth0.1) entered forwarding state [ 22.385330] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 23.090689] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready


Notes

Space for additional notes, links to forum threads or other resources.

Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/zyxel/zyxel_keenetic_omni_rev._a.txt · Last modified: 2019/10/17 20:33 by tmomas