Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision | ||
| toh:zyxel:t-56 [2024/12/10 07:51] – [Experimental Versions] frollic | toh:zyxel:t-56 [2024/12/12 12:34] – [Installation] frollic | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== ZyXEL T-56 ====== | ====== ZyXEL T-56 ====== | ||
| - | /* This template | + | The Zyxel T-56 is an ISP (Odido and Hyperoptic) branded EX5601-T1, which is the same as the T0 version, without the SFP+ port. |
| - | /* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ | + | |
| - | /* USE https:// | + | |
| - | {{page> | + | Installation is different, due to locked down firmware and boot loader, but once installed, you get the same functionality |
| - | + | ||
| - | //Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/ | + | |
| - | + | ||
| - | <WRAP BOX> | + | |
| - | FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/ | + | |
| - | </ | + | |
| /*****/ | /*****/ | ||
| /* How to add images ========> | /* How to add images ========> | ||
| /*****/ | /*****/ | ||
| - | |||
| - | {{media: | ||
| - | |||
| - | <WRAP BOX> | ||
| - | FIXME | ||
| - | ===== Getting started with a new Device Page ===== | ||
| - | - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** | ||
| - | - There are several " | ||
| - | - When there are no more " | ||
| - | |||
| - | ===== Keep the articles modular ===== | ||
| - | * Please include only model specific information, | ||
| - | * If you have no time to write certain stuff, link to [[docs: | ||
| - | * [[docs: | ||
| - | * DO NOT provide a complete howto here! Instead //groom// the [[docs: | ||
| - | </ | ||
| ===== Supported Versions ===== | ===== Supported Versions ===== | ||
| - | |||
| - | <WRAP BOX> | ||
| - | FIXME | ||
| - | - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** | ||
| - | - If the tables below show information for ''< | ||
| - | - If the tables below contain " | ||
| - | - the dataentry page for ZyXEL T-56 is missing. Please [[meta: | ||
| - | - filters are not set correctly. Most common reason for " | ||
| - | - If the tables still contain " | ||
| - | </ | ||
| <!-- ToH: { | <!-- ToH: { | ||
| Line 49: | Line 15: | ||
| " | " | ||
| " | " | ||
| - | " | + | " |
| - | " | + | " |
| } --> | } --> | ||
| - | |||
| - | /* If no unsupported functions known, comment out the following datatable or delete it. */ | ||
| - | <!-- ToH: { | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | " | ||
| - | } --> | ||
| - | |||
| - | |||
| ===== Hardware Highlights ===== | ===== Hardware Highlights ===== | ||
| <!-- ToH: { | <!-- ToH: { | ||
| Line 68: | Line 23: | ||
| " | " | ||
| " | " | ||
| - | " | + | " |
| - | " | + | " |
| - | } --> | + | } --> |
| ===== Installation ===== | ===== Installation ===== | ||
| /* stable release */ | /* stable release */ | ||
| - | /* uncomment once stable release is available | ||
| <!-- ToH: { | <!-- ToH: { | ||
| " | " | ||
| Line 81: | Line 35: | ||
| " | " | ||
| " | " | ||
| - | " | + | " |
| } --> | } --> | ||
| - | */ | ||
| + | :!: The T-56 requires [[: | ||
| - | /* snapshot */ | + | :!: The installation instruction will wipe the existing firmware, and maximize the flash space for OpenWRT (~400MB free) aka "ubootmod". |
| - | /* delete once stable release is available */ | + | |
| - | <!-- ToH: { | + | |
| - | " | + | |
| - | " | + | |
| - | " | + | |
| - | " | + | |
| - | " | + | |
| - | } --> | + | |
| + | :!: Going back to stock will be hard(er), if not impossible. Backing up the stock firmware isn't covered by this guide. | ||
| - | -> [[docs: | + | Use the 1GbE Ethernet ports until you've TFTP booted the ubootmod-initramfs-recovery.itb image. |
| - | FIXME Please add the installation procedure here. | ||
| - | ==== Flash Layout ==== | + | Until you reach the flashing section, everything will be done from RAM, if you reboot, you'll have to start over. |
| - | <WRAP BOX> | + | |
| - | FIXME // | + | |
| - | Please check out the article [[docs:techref: | + | The **mt7986-ram-ddr4-bl2.bin** can be downloaded from https://downloads.openwrt.org/ |
| - | </WRAP> | + | the rest from https:// |
| + | Use the **zyxel_ex5601-t0-ubootmod-** files! | ||
| - | ==== OEM easy installation ==== | + | * Disassemble the device, and connect to the serial port, and switch it on. |
| - | <WRAP BOX> | + | Verify serial' |
| - | FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ | + | |
| - | **//Remove / modify them if they do not apply to this particular device!//** | + | |
| - | This section deals with | + | You should end up at a password prompt |
| - | * How you install OpenWrt from a device freshly opened | + | < |
| - | * The steps required such as reset to factory defaults if the device has already been configured | + | Hit any key to stop autoboot: |
| + | Password: | ||
| + | </ | ||
| - | **Note:** Reset router to factory defaults if it has been previously configured. | + | |
| - | * Browse to ''< | + | |
| - | * Upload | + | |
| - | * Wait for it to reboot | + | |
| - | * Telnet to 192.168.1.1 and set a root password, or browse to ''< | + | |
| - | </ | + | |
| - | ==== OEM installation using the TFTP method ==== | + | There are premade binaries available for Apple and x86 in https:// |
| - | -> [[docs:guide-user:installation:generic.flashing.tftp]] | + | * Switch off the device, change the -s parameter making it match your serial port, and execute: |
| + | <code> | ||
| + | % mtk_uartboot -s [serial port] --aarch64 -p mt7986-ram-ddr4-bl2.bin -f openwrt-23.05.5-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip | ||
| + | mtk_uartboot - 0.1.1 | ||
| + | Using serial port: [serial port] | ||
| + | Handshake... | ||
| + | </ | ||
| + | * Switch on the T-56 and you should see | ||
| + | < | ||
| + | hw code: 0x7986 | ||
| + | hw sub code: 0x8a00 | ||
| + | hw ver: 0xca01 | ||
| + | sw ver: 0x1 | ||
| + | Baud rate set to 460800 | ||
| + | sending payload to 0x201000... | ||
| + | Checksum: 0x433d | ||
| + | Setting baudrate back to 115200 | ||
| + | Jumping to 0x201000 in aarch64... | ||
| + | Waiting for BL2. Message below: | ||
| + | ================================== | ||
| + | NOTICE: | ||
| + | NOTICE: BL2: Built : 01:34:01, Dec 5 2024 | ||
| + | NOTICE: | ||
| + | NOTICE: | ||
| + | NOTICE: | ||
| + | NOTICE: | ||
| + | NOTICE: | ||
| + | NOTICE: | ||
| + | NOTICE: | ||
| + | ================================== | ||
| + | BL2 UART DL version: 0x10 | ||
| + | Baudrate set to: 921600 | ||
| + | FIP sent. | ||
| + | ================================== | ||
| + | NOTICE: | ||
| + | ================================== | ||
| + | </ | ||
| + | * Once mtk_uartboot finishes, you can start up your serial port application again, and see the boot loader looping, and requesting an image. | ||
| - | === Specific values needed for tftp === | + | (You can keep serial connected throughout the rest of the installation process.) |
| - | <WRAP BOX> | + | <code> |
| + | Using ethernet@15100000 device | ||
| + | TFTP from server 192.168.1.254; | ||
| + | Filename ' | ||
| + | Load address: 0x46000000 | ||
| + | Loading: * | ||
| + | ARP Retry count exceeded; starting again | ||
| + | Wrong Image Format for bootm command | ||
| + | ERROR: can't get kernel image! | ||
| + | </ | ||
| + | * Reconfigure your TFTP host to use 192.168.1.254, | ||
| - | FIXME Enter values for "FILL-IN" below | + | < |
| + | Using ethernet@15100000 device | ||
| + | TFTP from server 192.168.1.254; | ||
| + | Filename ' | ||
| + | Load address: 0x46000000 | ||
| + | Loading: ################################################################# | ||
| + | ########################################### | ||
| + | 6 MiB/s | ||
| + | done | ||
| + | Bytes transferred = 7306108 (6f7b7c hex) | ||
| + | ## Loading kernel from FIT Image at 46000000 ... | ||
| + | Using ' | ||
| + | | ||
| + | | ||
| + | .... | ||
| + | </ | ||
| - | ^ Bootloader tftp server IPv4 address | + | |
| - | ^ Bootloader MAC address | + | |
| - | ^ Firmware tftp image | [[: | + | |
| - | ^ TFTP transfer window | + | |
| - | ^ TFTP window start | approximately FILL-IN seconds after power on | | + | |
| - | ^ TFTP client required IP address | + | |
| - | </ | + | You also have the option to switch over to ssh, or keep using serial for the actual installation. |
| - | ===== Upgrading OpenWrt ===== | + | **Preparations** |
| - | -> [[docs: | + | |
| - | <WRAP BOX> | + | You'll need the following files transferred (or downloaded) to the router' |
| + | * kmod-mtd-rw_*_aarch64_cortex-a53.ipk | ||
| + | * zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb | ||
| + | * zyxel_ex5601-t0-ubootmod-preloader.bin | ||
| + | * zyxel_ex5601-t0-ubootmod-bl31-uboot.fip | ||
| + | * zyxel_ex5601-t0-ubootmod-squashfs-sysupgrade.itb | ||
| - | FIXME These are generic instructions. Update with your router' | + | < |
| + | root@OpenWrt: | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | </ | ||
| - | ==== LuCI Web Upgrade Process ==== | + | **Flashing** |
| - | * Browse | + | If you used one of the LAN ports to download the files required, you might want to disconnect it, it'll start generate annoying port status updates after you've executed the 1st command. |
| - | * Upload image file for sysupgrade to LuCI | + | |
| - | * Wait for reboot | + | |
| - | ==== Terminal Upgrade Process ==== | + | < |
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | root@OpenWrt:/ | ||
| + | </ | ||
| + | The router should now restart, and boot into OpenWRT. | ||
| - | If you don' | + | Remember to remove the static IP from your client, if you haven' |
| - | There are two command line methods for upgrading: | + | |
| - | * '' | + | You can also upgrade the device to the latest OpenWRT version, if there's one available. |
| - | * '' | + | |
| - | Note: It is important that you put the firmware image into the ramdisk | + | Always use the Zyxel **EX5601-T0 |
| - | === sysupgrade === | ||
| - | * Login as root via SSH on 192.168.1.1, | ||
| + | ==== Flash Layout ==== | ||
| + | <WRAP BOX> | ||
| < | < | ||
| - | cd /tmp | + | 0x000000000000-0x000000100000 : " |
| - | wget http:// | + | 0x000000100000-0x000000180000 |
| - | sysupgrade / | + | 0x000000180000-0x000000380000 : " |
| + | 0x000000380000-0x000000580000 : " | ||
| + | 0x000000540000-0x000000580000 : " | ||
| + | 0x000000580000-0x00001e000000 : " | ||
| </ | </ | ||
| + | </ | ||
| - | === mtd === | ||
| - | If '' | ||
| - | * Login as root via SSH on 192.168.1.1, | ||
| - | |||
| - | < | ||
| - | cd /tmp | ||
| - | wget http:// | ||
| - | mtd write / | ||
| - | </ | ||
| - | |||
| - | </ | ||
| ===== Debricking ===== | ===== Debricking ===== | ||
| Line 201: | Line 210: | ||
| Set up your Internet connection, configure wireless, configure USB port, etc. | Set up your Internet connection, configure wireless, configure USB port, etc. | ||
| - | ===== Specific Configuration ===== | ||
| - | <WRAP BOX> | ||
| - | FIXME Please fill in real values for this device, then remove the EXAMPLEs | ||
| - | |||
| - | ==== Network interfaces ==== | ||
| - | The default network configuration is: | ||
| - | ^ Interface Name ^ Description | ||
| - | | br-lan | ||
| - | | vlan0 (eth0.0) | ||
| - | | vlan1 (eth0.1) | ||
| - | | wl0 | EXAMPLE WiFi | EXAMPLE Disabled | ||
| - | |||
| - | </ | ||
| - | |||
| - | ==== Switch Ports (for VLANs) ==== | ||
| - | <WRAP BOX> | ||
| - | FIXME Please fill in real values for this device, then remove the EXAMPLEs | ||
| - | |||
| - | Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. | ||
| - | ^ Port ^ Switch port ^ | ||
| - | | Internet (WAN) | EXAMPLE 4 | | ||
| - | | LAN 1 | EXAMPLE 3 | | ||
| - | | LAN 2 | EXAMPLE 2 | | ||
| - | | LAN 3 | EXAMPLE 1 | | ||
| - | | LAN 4 | EXAMPLE 0 | | ||
| - | |||
| - | </ | ||
| ==== Buttons ==== | ==== Buttons ==== | ||
| Line 248: | Line 230: | ||
| ===== Hardware ===== | ===== Hardware ===== | ||
| ==== Info ==== | ==== Info ==== | ||
| - | <WRAP BOX> | ||
| - | FIXME | ||
| - | - This table is automatically generated, **once the correct filters for Brand and Model are set.** | ||
| - | - If you see " | ||
| - | - If you still don't see a table here, or a table filled with ' | ||
| - | - If you see a table with the desired device data, everything is OK and you can delete this text and the ''< | ||
| - | - If it still doesn' | ||
| - | </ | ||
| - | ---- datatemplatelist dttpllist ---- | + | <!-- ToH: { |
| - | template: meta:template_datatemplatelist | + | " |
| - | cols | + | " |
| - | filter | + | " |
| - | filter | + | " |
| - | filter | + | " |
| - | ---- | + | |
| + | } --> | ||
| ==== Photos ==== | ==== Photos ==== | ||
| Line 284: | Line 259: | ||
| **Note:** This will void your warranty! | **Note:** This will void your warranty! | ||
| - | <WRAP BOX> | + | You need to remove |
| - | FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, | + | |
| - | * To remove the cover and open the device, do a/b/c | + | |
| - | </ | + | |
| - | + | ||
| - | //Main PCB://\\ | + | |
| - | **Insert photo of PCB** | + | |
| ==== Serial ==== | ==== Serial ==== | ||
| -> [[docs: | -> [[docs: | ||
| - | How to connect to the Serial | + | Serial |
| - | **Insert photo of PCB with markings for serial | + | |
| - | <WRAP BOX> | + | Pins are pre soldered. |
| - | FIXME //Replace EXAMPLE by real values.// | + | |
| - | </ | + | |
| - | ^ Serial connection parameters\\ for ZyXEL T-56 @@Version@@ | + | ^ Serial connection parameters for ZyXEL T-56 | 115200, 8N1, 3.3V | |
| - | ==== JTAG ==== | + | < |
| - | -> [[docs: | + | +-------+-------+-------+-------+-------+ |
| - | + | | +3.3V | RX | |
| - | How to connect | + | +---+---+-------+-------+-------+-------+ |
| - | **Insert photo of PCB with markings for JTAG port** | + | | |
| + | +--- Don' | ||
| + | </ | ||
| ===== Bootloader mods ===== | ===== Bootloader mods ===== | ||
| -> [[docs: | -> [[docs: | ||
| - | |||
| - | ===== Hardware mods ===== | ||
| - | |||
| - | None so far. | ||
| Line 321: | Line 285: | ||
| ==== OEM bootlog ==== | ==== OEM bootlog ==== | ||
| <WRAP bootlog> | <WRAP bootlog> | ||
| - | < | + | < |
| + | U-Boot 2022.01-rc4 (Aug 11 2022 - 09:45:52 +0000) | ||
| + | |||
| + | CPU: | ||
| + | Model: ZYXEL EX5601-T0 | ||
| + | DRAM: 1 GiB | ||
| + | |||
| + | Initializing NMBM ... | ||
| + | spi-nand: spi_nand spi_nand@1: Macronix SPI NAND was found. | ||
| + | spi-nand: spi_nand spi_nand@1: 512 MiB, block size: 256 KiB, page size: 4096, OOB size: 128 | ||
| + | Could not find a valid device for nmbm0 | ||
| + | Signature found at block 2047 [0x1ffc0000] | ||
| + | First info table with writecount 2 found in block 1920 | ||
| + | Second info table with writecount 2 found in block 1923 | ||
| + | NMBM has been successfully attached | ||
| + | |||
| + | MMC: | ||
| + | Loading Environment from MTD... OK | ||
| + | In: serial@11002000 | ||
| + | Out: | ||
| + | Err: | ||
| + | Net: eth0: ethernet@15100000 | ||
| + | Reading 262144 byte(s) at offset 0x00000000 | ||
| + | ## Booting kernel from Legacy Image at 46000000 ... | ||
| + | Image Name: | ||
| + | Image Type: | ||
| + | Data Size: 23638 Bytes = 23.1 KiB | ||
| + | Load Address: 41e00200 | ||
| + | Entry Point: | ||
| + | | ||
| + | | ||
| + | |||
| + | |||
| + | ZYXEL zloader v2.3.9 (08/11/2022 - 09:46:58) | ||
| + | ubi0: attaching mtd7 | ||
| + | ubi0: scanning is finished | ||
| + | ubi0: attached mtd7 (name " | ||
| + | ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes | ||
| + | ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | ||
| + | ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 | ||
| + | ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0 | ||
| + | ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | ||
| + | ubi0: max/mean erase counter: 4/0, WL threshold: 4096, image sequence number: 1681461326 | ||
| + | ubi0: available PEBs: 1, total reserved PEBs: 255, PEBs reserved for bad PEB handling: 38 | ||
| + | Reading from volume ' | ||
| + | ubi0: detaching mtd7 | ||
| + | ubi0: mtd7 is detached | ||
| + | ubi0: attaching mtd8 | ||
| + | ubi0: scanning is finished | ||
| + | ubi0: attached mtd8 (name " | ||
| + | ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes | ||
| + | ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | ||
| + | ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 | ||
| + | ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0 | ||
| + | ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128 | ||
| + | ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 0 | ||
| + | ubi0: available PEBs: 214, total reserved PEBs: 42, PEBs reserved for bad PEB handling: 38 | ||
| + | Reading from volume ' | ||
| + | ubi0: detaching mtd8 | ||
| + | ubi0: mtd8 is detached | ||
| + | Cannot get zyfwinfo from ubi2 | ||
| + | ubi0: attaching mtd7 | ||
| + | ubi0: scanning is finished | ||
| + | ubi0: attached mtd7 (name " | ||
| + | ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes | ||
| + | ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | ||
| + | ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 | ||
| + | ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0 | ||
| + | ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | ||
| + | ubi0: max/mean erase counter: 4/0, WL threshold: 4096, image sequence number: 1681461326 | ||
| + | ubi0: available PEBs: 1, total reserved PEBs: 255, PEBs reserved for bad PEB handling: 38 | ||
| + | Reading from volume ' | ||
| + | ubi0: detaching mtd7 | ||
| + | ubi0: mtd7 is detached | ||
| + | zld_verify_rootfs_signature-[Info]: | ||
| + | rootfs signature verification of ubi passed | ||
| + | Current bootflag is 0 | ||
| + | BOARD_DETECT_BY_GPIO=> | ||
| + | ubi0: attaching mtd7 | ||
| + | ubi0: scanning is finished | ||
| + | ubi0: attached mtd7 (name " | ||
| + | ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes | ||
| + | ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | ||
| + | ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 | ||
| + | ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0 | ||
| + | ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | ||
| + | ubi0: max/mean erase counter: 4/0, WL threshold: 4096, image sequence number: 1681461326 | ||
| + | ubi0: available PEBs: 1, total reserved PEBs: 255, PEBs reserved for bad PEB handling: 38 | ||
| + | Reading from volume ' | ||
| + | ubi0: detaching mtd7 | ||
| + | ubi0: mtd7 is detached | ||
| + | Multiboot clinent version: 2.7 | ||
| + | |||
| + | Hit any key to stop autoboot: | ||
| + | ubi0: attaching mtd7 | ||
| + | ubi0: scanning is finished | ||
| + | ubi0: attached mtd7 (name " | ||
| + | ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes | ||
| + | ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | ||
| + | ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 | ||
| + | ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0 | ||
| + | ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | ||
| + | ubi0: max/mean erase counter: 4/0, WL threshold: 4096, image sequence number: 1681461326 | ||
| + | ubi0: available PEBs: 1, total reserved PEBs: 255, PEBs reserved for bad PEB handling: 38 | ||
| + | Reading from volume ' | ||
| + | ## Loading kernel from FIT Image at 46000000 ... | ||
| + | Using ' | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | Data Start: | ||
| + | Data Size: 3763324 Bytes = 3.6 MiB | ||
| + | | ||
| + | | ||
| + | Load Address: 0x48080000 | ||
| + | Entry Point: | ||
| + | Hash algo: crc32 | ||
| + | Hash value: | ||
| + | Hash algo: sha1 | ||
| + | Hash value: | ||
| + | | ||
| + | ## Loading fdt from FIT Image at 46000000 ... | ||
| + | Using ' | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | Data Start: | ||
| + | Data Size: 22484 Bytes = 22 KiB | ||
| + | | ||
| + | Hash algo: crc32 | ||
| + | Hash value: | ||
| + | Hash algo: sha1 | ||
| + | Hash value: | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | |||
| + | Starting kernel ... | ||
| + | |||
| + | [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | ||
| + | [ 0.000000] Linux version 5.4.171 (routine@5ccc42a6d802) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r0-43529802)) #0 SMP Fri Apr 14 08:35:26 2023 | ||
| + | [ 0.000000] Machine model: ZYXEL EX5601-T0 | ||
| + | [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '' | ||
| + | [ 0.000000] printk: bootconsole [uart8250] enabled | ||
| + | [ 0.000000] On node 0 totalpages: 261136 | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] psci: probing for conduit method from DT. | ||
| + | [ 0.000000] psci: PSCIv1.1 detected in firmware. | ||
| + | [ 0.000000] psci: Using standard PSCI v0.2 function IDs | ||
| + | [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | ||
| + | [ 0.000000] psci: SMC Calling Convention v1.0 | ||
| + | [ 0.000000] percpu: Embedded 20 pages/cpu s43864 r8192 d29864 u81920 | ||
| + | [ 0.000000] pcpu-alloc: s43864 r8192 d29864 u81920 alloc=20*4096 | ||
| + | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | ||
| + | [ 0.000000] Detected VIPT I-cache on CPU0 | ||
| + | [ 0.000000] CPU features: detected: GIC system register CPU interface | ||
| + | [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration | ||
| + | [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257040 | ||
| + | [ 0.000000] Kernel command line: console=ttyS0, | ||
| + | [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | ||
| + | [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) | ||
| + | [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | ||
| + | [ 0.000000] Memory: 1012844K/ | ||
| + | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, | ||
| + | [ 0.000000] rcu: Hierarchical RCU implementation. | ||
| + | [ 0.000000] rcu: | ||
| + | [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | ||
| + | [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | ||
| + | [ 0.000000] GICv3: GIC: Using split EOI/ | ||
| + | [ 0.000000] GICv3: 640 SPIs implemented | ||
| + | [ 0.000000] GICv3: 0 Extended SPIs implemented | ||
| + | [ 0.000000] GICv3: Distributor has no Range Selector support | ||
| + | [ 0.000000] GICv3: 16 PPIs implemented | ||
| + | [ 0.000000] GICv3: no VLPI support, no direct LPI support | ||
| + | [ 0.000000] GICv3: CPU0: found redistributor 0 region 0: | ||
| + | [ 0.000000] random: get_random_bytes called from start_kernel+0x2d4/ | ||
| + | [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). | ||
| + | [ 0.000000] clocksource: | ||
| + | [ 0.000003] sched_clock: | ||
| + | [ 0.008176] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000) | ||
| + | [ 0.018491] pid_max: default: 32768 minimum: 301 | ||
| + | [ 0.023198] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) | ||
| + | [ 0.030633] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) | ||
| + | [ 0.039253] ASID allocator initialised with 65536 entries | ||
| + | [ 0.044725] rcu: Hierarchical SRCU implementation. | ||
| + | [ 0.049788] smp: Bringing up secondary CPUs ... | ||
| + | [ 0.054558] Detected VIPT I-cache on CPU1 | ||
| + | [ 0.054577] GICv3: CPU1: found redistributor 1 region 0: | ||
| + | [ 0.054597] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | ||
| + | [ 0.054819] Detected VIPT I-cache on CPU2 | ||
| + | [ 0.054827] GICv3: CPU2: found redistributor 2 region 0: | ||
| + | [ 0.054835] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | ||
| + | [ 0.055037] Detected VIPT I-cache on CPU3 | ||
| + | [ 0.055045] GICv3: CPU3: found redistributor 3 region 0: | ||
| + | [ 0.055052] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | ||
| + | [ 0.055079] smp: Brought up 1 node, 4 CPUs | ||
| + | [ 0.111630] SMP: Total of 4 processors activated. | ||
| + | [ 0.116352] CPU features: detected: 32-bit EL0 Support | ||
| + | [ 0.121511] CPU features: detected: CRC32 instructions | ||
| + | [ 0.126758] CPU: All CPU(s) started at EL2 | ||
| + | [ 0.130876] alternatives: | ||
| + | [ 0.137326] clocksource: | ||
| + | [ 0.147139] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | ||
| + | [ 0.154131] pinctrl core: initialized pinctrl subsystem | ||
| + | [ 0.159801] NET: Registered protocol family 16 | ||
| + | [ 0.164439] DMA: preallocated 256 KiB pool for atomic allocations | ||
| + | [ 0.178981] cryptd: max_cpu_qlen set to 1000 | ||
| + | [ 0.184416] SCSI subsystem initialized | ||
| + | [ 0.188359] libata version 3.00 loaded. | ||
| + | [ 0.192454] usbcore: registered new interface driver usbfs | ||
| + | [ 0.197982] usbcore: registered new interface driver hub | ||
| + | [ 0.203337] usbcore: registered new device driver usb | ||
| + | [ 0.208811] Advanced Linux Sound Architecture Driver Initialized. | ||
| + | [ 0.215222] Bluetooth: Core ver 2.22 | ||
| + | [ 0.218825] NET: Registered protocol family 31 | ||
| + | [ 0.223287] Bluetooth: HCI device and connection manager initialized | ||
| + | [ 0.229671] Bluetooth: HCI socket layer initialized | ||
| + | [ 0.234568] Bluetooth: L2CAP socket layer initialized | ||
| + | [ 0.239644] Bluetooth: SCO socket layer initialized | ||
| + | [ 0.245258] rbus 18000000.wbsys: | ||
| + | [ 0.251208] pci_bus 0000:00: root bus resource [mem 0x18000000-0x18ffffff] | ||
| + | [ 0.258115] pci_bus 0000:00: root bus resource [bus 00-ff] | ||
| + | [ 0.263624] pci_bus 0000:00: scanning bus | ||
| + | [ 0.267657] pci 0000: | ||
| + | [ 0.273699] pci 0000: | ||
| + | [ 0.280517] pci 0000: | ||
| + | [ 0.286812] pci 0000: | ||
| + | [ 0.293106] pci 0000: | ||
| + | [ 0.299401] pci 0000: | ||
| + | [ 0.306479] pci_bus 0000:00: fixups for bus | ||
| + | [ 0.310679] pci_bus 0000:00: bus scan returning with max=00 | ||
| + | [ 0.316546] clocksource: | ||
| + | [ 0.323213] thermal_sys: | ||
| + | [ 0.323217] thermal_sys: | ||
| + | [ 0.329343] thermal_sys: | ||
| + | [ 0.335374] thermal_sys: | ||
| + | [ 0.341405] thermal_sys: | ||
| + | [ 0.347697] NET: Registered protocol family 2 | ||
| + | [ 0.358701] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) | ||
| + | [ 0.366670] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) | ||
| + | [ 0.375077] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) | ||
| + | [ 0.382889] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) | ||
| + | [ 0.390220] TCP: Hash tables configured (established 8192 bind 8192) | ||
| + | [ 0.396670] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) | ||
| + | [ 0.403327] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) | ||
| + | [ 0.410485] NET: Registered protocol family 1 | ||
| + | [ 0.414880] PCI: CLS 0 bytes, default 64 | ||
| + | [ 0.419467] workingset: timestamp_bits=46 max_order=18 bucket_order=0 | ||
| + | [ 0.428502] squashfs: version 4.0 (2009/ | ||
| + | [ 0.434430] ntfs: driver 2.1.32 [Flags: R/O]. | ||
| + | [ 0.438873] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | ||
| + | [ 0.465042] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled | ||
| + | [ 0.471906] printk: console [ttyS0] disabled | ||
| + | [ 0.496313] 11002000.serial: | ||
| + | [ 0.505519] printk: console [ttyS0] enabled | ||
| + | [ 0.505519] printk: console [ttyS0] enabled | ||
| + | [ 0.513869] printk: bootconsole [uart8250] disabled | ||
| + | [ 0.513869] printk: bootconsole [uart8250] disabled | ||
| + | [ 0.543954] 11003000.serial: | ||
| + | [ 0.573388] 11004000.serial: | ||
| + | [ 0.582960] mtk_rng 1020f000.trng: | ||
| + | [ 0.583168] random: fast init done | ||
| + | [ 0.588382] cacheinfo: Unable to detect cache hierarchy for CPU 0 | ||
| + | [ 0.591887] random: crng init done | ||
| + | [ 0.599386] loop: module loaded | ||
| + | [ 0.605657] spi-nor spi0.0: unrecognized JEDEC id bytes: ff c2 37 03 00 c2 | ||
| + | [ 0.612533] spi-nor: probe of spi0.0 failed with error -2 | ||
| + | [ 0.618083] spi-nand spi0.1: Macronix SPI NAND was found. | ||
| + | [ 0.623475] spi-nand spi0.1: 512 MiB, block size: 256 KiB, page size: 4096, OOB size: 128 | ||
| + | [ 0.632956] libphy: Fixed MDIO Bus: probed | ||
| + | [ 0.648903] libphy: mdio: probed | ||
| + | [ 0.652230] libphy: (67c9de0a) Ignore assert reset signal for Intel GPY211. | ||
| + | [ 0.702838] Intel GPY211 PHY mdio-bus: | ||
| + | [ 0.710812] libphy: (67c9de0a) Ignore assert reset signal for Intel GPY211. | ||
| + | [ 0.718036] Intel GPY211 PHY mdio-bus: | ||
| + | [ 0.726047] mtk_soc_eth 15100000.ethernet: | ||
| + | [ 0.734429] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc011a80000, | ||
| + | [ 0.743564] mtk_soc_eth 15100000.ethernet: | ||
| + | [ 0.751885] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc011a80000, | ||
| + | [ 0.760998] (unnamed net_device) (dummy): netif_napi_add() called with weight 256 | ||
| + | [ 0.768738] xhci-mtk 11200000.xhci: | ||
| + | [ 0.777354] xhci-mtk 11200000.xhci: | ||
| + | [ 0.786172] DEBUG: enable is gpio 419 and active 1 | ||
| + | [ 0.790967] DEBUG: oc is gpio 418 and active 1 | ||
| + | [ 0.796013] xhci-mtk 11200000.xhci: | ||
| + | [ 0.801333] xhci-mtk 11200000.xhci: | ||
| + | [ 0.811863] xhci-mtk 11200000.xhci: | ||
| + | [ 0.821084] xhci-mtk 11200000.xhci: | ||
| + | [ 0.827251] hub 1-0:1.0: USB hub found | ||
| + | [ 0.831006] hub 1-0:1.0: 2 ports detected | ||
| + | [ 0.835180] xhci-mtk 11200000.xhci: | ||
| + | [ 0.840489] xhci-mtk 11200000.xhci: | ||
| + | [ 0.847957] xhci-mtk 11200000.xhci: | ||
| + | [ 0.855106] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | ||
| + | [ 0.863378] hub 2-0:1.0: USB hub found | ||
| + | [ 0.867131] hub 2-0:1.0: 1 port detected | ||
| + | [ 0.871349] usbcore: registered new interface driver uas | ||
| + | [ 0.876683] usbcore: registered new interface driver usb-storage | ||
| + | [ 0.882765] i2c /dev entries driver | ||
| + | [ 0.887270] mtk-wdt 1001c000.watchdog: | ||
| + | [ 0.895175] device-mapper: | ||
| + | [ 0.903672] Bluetooth: HCI UART driver ver 2.3 | ||
| + | [ 0.908106] Bluetooth: HCI UART protocol H4 registered | ||
| + | [ 0.913227] Bluetooth: HCI UART protocol BCSP registered | ||
| + | [ 0.918566] Bluetooth: HCI UART protocol Broadcom registered | ||
| + | [ 0.924219] Bluetooth: HCI UART protocol QCA registered | ||
| + | [ 0.929809] crypto-safexcel 10320000.crypto: | ||
| + | [ 0.943096] mt79xx-audio 11210000.audio-controller: | ||
| + | [ 0.951709] mt79xx-audio 11210000.audio-controller: | ||
| + | [ 0.960199] debugfs: Directory ' | ||
| + | [ 0.969737] slic-dummy-codec dummy_codec: | ||
| + | [ 0.975809] mt79xx-si3218x sound_si3218x: | ||
| + | [ 0.983150] mt79xx-si3218x sound_si3218x: | ||
| + | [ 0.990354] | ||
| + | [ 0.990354] ### | ||
| + | [ 0.990354] | ||
| + | [ 0.999835] | ||
| + | [ 0.999835] ### | ||
| + | [ 0.999835] | ||
| + | [ 1.011822] mt79xx-si3218x sound_si3218x: | ||
| + | [ 1.018905] Initializing XFRM netlink socket | ||
| + | [ 1.023426] NET: Registered protocol family 10 | ||
| + | [ 1.028329] Segment Routing with IPv6 | ||
| + | [ 1.032021] NET: Registered protocol family 17 | ||
| + | [ 1.036493] Bridge firewalling registered | ||
| + | [ 1.040542] 8021q: 802.1Q VLAN Support v1.8 | ||
| + | [ 1.051732] nmbm nmbm_spim_nand: | ||
| + | [ 1.061229] nmbm nmbm_spim_nand: | ||
| + | [ 1.076745] nmbm nmbm_spim_nand: | ||
| + | [ 1.084825] nmbm nmbm_spim_nand: | ||
| + | [ 1.091380] 8 fixed-partitions partitions found on MTD device nmbm_spim_nand | ||
| + | [ 1.098413] Creating 8 MTD partitions on " | ||
| + | [ 1.103885] 0x000000000000-0x000000100000 : " | ||
| + | [ 1.109000] 0x000000100000-0x000000180000 : " | ||
| + | [ 1.114611] 0x000000180000-0x000000380000 : " | ||
| + | [ 1.119938] 0x000000380000-0x000000540000 : " | ||
| + | [ 1.124915] 0x000000540000-0x000000580000 : " | ||
| + | [ 1.130233] 0x000000580000-0x000004580000 : " | ||
| + | [ 1.135259] 0x000004580000-0x000008580000 : " | ||
| + | [ 1.140358] 0x000008580000-0x00001e000000 : " | ||
| + | [ 1.353722] libphy: dsa slave smi: probed | ||
| + | [ 1.358585] mt7530 mdio-bus:1f lan1 (uninitialized): | ||
| + | [ 1.367973] mt7530 mdio-bus:1f lan2 (uninitialized): | ||
| + | [ 1.377290] mt7530 mdio-bus:1f lan3 (uninitialized): | ||
| + | [ 1.386232] mt7530 mdio-bus: | ||
| + | [ 1.393368] DSA: tree 0 setup | ||
| + | [ 1.393622] mt7530 mdio-bus: | ||
| + | [ 1.396467] UBI: plan to attach ubi | ||
| + | [ 1.407632] UBI: auto-attach mtd6 | ||
| + | [ 1.410950] ubi0: attaching mtd6 | ||
| + | [ 1.720360] ubi0: scanning is finished | ||
| + | [ 1.731772] ubi0: attached mtd6 (name " | ||
| + | [ 1.737160] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes | ||
| + | [ 1.744014] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 | ||
| + | [ 1.750782] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 | ||
| + | [ 1.757723] ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0 | ||
| + | [ 1.763710] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 | ||
| + | [ 1.770912] ubi0: max/mean erase counter: 4/0, WL threshold: 4096, image sequence number: 1681461326 | ||
| + | [ 1.780019] ubi0: available PEBs: 1, total reserved PEBs: 255, PEBs reserved for bad PEB handling: 38 | ||
| + | [ 1.789218] ubi0: background thread " | ||
| + | [ 1.790187] block ubiblock0_1: | ||
| + | [ 1.800678] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem | ||
| + | [ 1.807624] hctosys: unable to open rtc device (rtc0) | ||
| + | [ 1.812881] ALSA device list: | ||
| + | [ 1.815833] | ||
| + | [ 1.825098] VFS: Mounted root (squashfs filesystem) readonly on device 253:0. | ||
| + | [ 1.832379] Freeing unused kernel memory: 448K | ||
| + | [ 1.852575] Run /sbin/init as init process | ||
| + | [ 2.057861] init: Console is alive | ||
| + | [ 2.061372] init: - watchdog - | ||
| + | [ 4.652825] kmodloader: loading kernel modules from / | ||
| + | [ 4.692289] conninfra@(mtk_conninfra_drv_init: | ||
| + | [ 4.699979] Get Index(0-TOP_MISC_BASE) phy_addr(0x11d10000) vir_addr=(0xffffffc010c3d000) size=(0x1000) | ||
| + | [ 4.709353] Get Index(1-TOPRGU_BASE) phy_addr(0x1001c000) vir_addr=(0xffffffc010c45000) size=(0x1000) | ||
| + | [ 4.718550] Get Index(2-GPIO_BASE) phy_addr(0x1001f000) vir_addr=(0xffffffc010c4d000) size=(0x1000) | ||
| + | [ 4.727573] Get Index(3-IOCFG_TR_BASE) phy_addr(0x11f00000) vir_addr=(0xffffffc010c55000) size=(0x1000) | ||
| + | [ 4.736947] Get Index(4-IOCFG_TL_BASE) phy_addr(0x11f10000) vir_addr=(0xffffffc010c5d000) size=(0x1000) | ||
| + | [ 4.746317] Get Index(5-INFRACFG_AO_BASE) phy_addr(0x10003000) vir_addr=(0xffffffc010c65000) size=(0x1000) | ||
| + | [ 4.755946] Get Index(6-CONN_INFRA_CFG_BASE) phy_addr(0x18001000) vir_addr=(0xffffffc010c6d000) size=(0x1000) | ||
| + | [ 4.765834] Get Index(7-CONN_INFRA_SYSRAM_BASE) phy_addr(0x18050000) vir_addr=(0xffffffc010c75000) size=(0x1000) | ||
| + | [ 4.775983] Get Index(8-CONN_INFRA_CLKGEN_ON_TOP_BASE) phy_addr(0x18009000) vir_addr=(0xffffffc010c7d000) size=(0x1000) | ||
| + | [ 4.786742] Get Index(9-CONN_HOST_CSR_TOP_BASE) phy_addr(0x18060000) vir_addr=(0xffffffc010c7f000) size=(0x1000) | ||
| + | [ 4.796892] Get Index(10-CONN_INFRA_BUS_CR_BASE) phy_addr(0x1800e000) vir_addr=(0xffffffc010c81000) size=(0x1000) | ||
| + | [ 4.807128] Get Index(11-CONN_INFRA_RGU_BASE) phy_addr(0x18000000) vir_addr=(0xffffffc010c83000) size=(0x1000) | ||
| + | [ 4.817104] Get Index(12-CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18005000) vir_addr=(0xffffffc010c85000) size=(0x1000) | ||
| + | [ 4.827513] Get Index(13-INST2_CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18085000) vir_addr=(0xffffffc010c8d000) size=(0x1000) | ||
| + | [ 4.838443] Get Index(14-CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18004000) vir_addr=(0xffffffc010c95000) size=(0x1000) | ||
| + | [ 4.848852] Get Index(15-INST2_CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18084000) vir_addr=(0xffffffc010c9d000) size=(0x1000) | ||
| + | [ 4.859782] Get Index(16-CONN_SEMAPHORE_BASE) phy_addr(0x18070000) vir_addr=(0xffffffc010d30000) size=(0x10000) | ||
| + | [ 4.869847] Get Index(17-CONN_AFE_CTL_BASE) phy_addr(0x18003000) vir_addr=(0xffffffc010ca5000) size=(0x1000) | ||
| + | [ 4.879649] Get Index(18-CONN_AFE_CTL_2ND_BASE) phy_addr(0x18083000) vir_addr=(0xffffffc010cad000) size=(0x1000) | ||
| + | [ 4.889800] Get Index(19-WF_TOP_SLPPROT_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010d50000) size=(0x10000) | ||
| + | [ 4.900123] Get Index(20-WF_TOP_CFG_BASE) phy_addr(0x184b0000) vir_addr=(0xffffffc010caf000) size=(0x1000) | ||
| + | [ 4.909753] Get Index(21-WF_MCU_CONFIG_LS_BASE) phy_addr(0x184f0000) vir_addr=(0xffffffc010cb1000) size=(0x1000) | ||
| + | [ 4.919903] Get Index(22-WF_MCU_BUS_CR_BASE) phy_addr(0x18400000) vir_addr=(0xffffffc010cb3000) size=(0x1000) | ||
| + | [ 4.929793] Get Index(23-WF_MCUSYS_INFRA_BUS_FULL_U_DEBUG_CTRL_AO_BASE) phy_addr(0x18500000) vir_addr=(0xffffffc010cb5000) size=(0x1000) | ||
| + | [ 4.942023] Get Index(24-WF_TOP_CFG_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010d70000) size=(0x10000) | ||
| + | [ 4.952631] eeFlashId: 0x7986, EEPROM_content_valid = 1 | ||
| + | [ 4.953831] conninfra@(consys_plt_hw_init: | ||
| + | [ 4.970926] conninfra@(consys_plt_hw_init: | ||
| + | [ 4.978570] [emi_mng_init] gConEmiPhyBase = [0x4fc00000] size = [0x100000] fw size = [0x100000] ops=[000000003bb57804] | ||
| + | [ 4.989318] conninfra@(mtk_conninfra_drv_init: | ||
| + | [ 4.997072] ConnInfra Dev: init (0) | ||
| + | [ 5.002029] conninfra@(_consys_polling_chipid_int: | ||
| + | [ 5.011835] conninfra@(consys_bus_clock_ctrl: | ||
| + | [ 5.020861] conninfra@(connsys_d_die_cfg: | ||
| + | [ 5.028317] conninfra@(_connsys_a_die_chip_id_confirm: | ||
| + | [ 5.039821] conninfra@(_connsys_a_die_chip_id_confirm: | ||
| + | [ 5.052332] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.060972] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.070618] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.080266] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.093941] conninfra@(connsys_a_die_efuse_read_nolock: | ||
| + | [ 5.105442] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.115088] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.124735] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.138410] conninfra@(connsys_a_die_efuse_read_nolock: | ||
| + | [ 5.149910] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.159558] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.169205] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.182880] conninfra@(connsys_a_die_efuse_read_nolock: | ||
| + | [ 5.194379] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.203019] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.211658] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.221308] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.229948] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.239595] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.249241] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.262917] conninfra@(connsys_a_die_efuse_read_nolock: | ||
| + | [ 5.274417] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.284063] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.293710] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.307385] conninfra@(connsys_a_die_efuse_read_nolock: | ||
| + | [ 5.318885] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.328531] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.338178] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.351852] conninfra@(connsys_a_die_efuse_read_nolock: | ||
| + | [ 5.363352] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.371991] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.380630] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.389272] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.398870] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.407511] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.417110] conninfra@(consys_spi_write_nolock: | ||
| + | [ 5.425690] conninfra@(_consys_polling_chipid_int: | ||
| + | [ 5.435492] conninfra@(_consys_hw_conninfra_wakeup: | ||
| + | [ 5.444348] conninfra@(_consys_hw_conninfra_sleep: | ||
| + | [ 5.452937] conninfra@(opfunc_power_on_internal: | ||
| + | [ 5.483061] ehci_hcd: USB 2.0 ' | ||
| + | [ 5.490433] ehci-fsl: Freescale EHCI Host controller driver | ||
| + | [ 5.496736] ehci-platform: | ||
| + | [ 5.504260] ohci_hcd: USB 1.1 ' | ||
| + | [ 5.511206] ohci-platform: | ||
| + | [ 5.537697] mediatek_soc_hnat 15100000.hnat: | ||
| + | [ 5.542924] mediatek_soc_hnat 15100000.hnat: | ||
| + | [ 5.548050] mediatek_soc_hnat 15100000.hnat: | ||
| + | [ 5.553259] mediatek_soc_hnat 15100000.hnat: | ||
| + | [ 5.558642] mediatek_soc_hnat 15100000.hnat: | ||
| + | [ 5.564299] mediatek_soc_hnat 15100000.hnat: | ||
| + | [ 5.570983] mediatek_soc_hnat 15100000.hnat: | ||
| + | [ 5.576778] hnat roaming work enable | ||
| + | [ 5.582894] warp_module_init(): | ||
| + | [ 5.589832] create warp_ctrl ok!!! | ||
| + | [ 5.593253] wed_get_slot_map(): | ||
| + | [ 5.599080] wed_get_slot_map(): | ||
| + | [ 5.605382] kmodloader: done loading kernel modules from / | ||
| + | [ 5.622755] init: - preinit - | ||
| + | [ 6.206210] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/ | ||
| + | [ 6.214533] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/ | ||
| + | Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | ||
| + | rm: can't remove '/ | ||
| + | [ 8.290535] mount_root: loading kmods from internal overlay | ||
| + | [ 8.310780] kmodloader: loading kernel modules from // | ||
| + | [ 8.318760] kmodloader: done loading kernel modules from // | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | Please press Enter to activate this console. | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | </ | ||
| </ | </ | ||
| ==== OpenWrt bootlog ==== | ==== OpenWrt bootlog ==== | ||
| <WRAP bootlog> | <WRAP bootlog> | ||
| - | < | + | < |
| - | </ | + | ## Checking Image at 46000000 ... |
| + | FIT image found | ||
| + | FIT description: | ||
| + | Image 0 (kernel-1) | ||
| + | | ||
| + | | ||
| + | | ||
| + | Data Start: | ||
| + | Data Size: 3781454 Bytes = 3.6 MiB | ||
| + | | ||
| + | | ||
| + | Load Address: 0x48000000 | ||
| + | Entry Point: | ||
| + | Hash algo: crc32 | ||
| + | Hash value: | ||
| + | Hash algo: sha1 | ||
| + | Hash value: | ||
| + | Image 1 (fdt-1) | ||
| + | | ||
| + | | ||
| + | | ||
| + | Data Start: | ||
| + | Data Size: 24510 Bytes = 23.9 KiB | ||
| + | | ||
| + | Hash algo: crc32 | ||
| + | Hash value: | ||
| + | Hash algo: sha1 | ||
| + | Hash value: | ||
| + | Image 2 (rootfs-1) | ||
| + | | ||
| + | | ||
| + | | ||
| + | Data Start: | ||
| + | Data Size: 5066752 Bytes = 4.8 MiB | ||
| + | Hash algo: crc32 | ||
| + | Hash value: | ||
| + | Hash algo: sha1 | ||
| + | Hash value: | ||
| + | Default Configuration: | ||
| + | Configuration 0 (config-1) | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | ## Checking hash(es) for FIT Image at 46000000 ... | ||
| + | | ||
| + | | ||
| + | | ||
| + | ## Loading kernel from FIT Image at 46000000 ... | ||
| + | Using ' | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | Data Start: | ||
| + | Data Size: 3781454 Bytes = 3.6 MiB | ||
| + | | ||
| + | | ||
| + | Load Address: 0x48000000 | ||
| + | Entry Point: | ||
| + | Hash algo: crc32 | ||
| + | Hash value: | ||
| + | Hash algo: sha1 | ||
| + | Hash value: | ||
| + | | ||
| + | ## Loading fdt from FIT Image at 46000000 ... | ||
| + | Using ' | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | Data Start: | ||
| + | Data Size: 24510 Bytes = 23.9 KiB | ||
| + | | ||
| + | Hash algo: crc32 | ||
| + | Hash value: | ||
| + | Hash algo: sha1 | ||
| + | Hash value: | ||
| + | | ||
| + | | ||
| + | Working FDT set to 4639d000 | ||
| + | ## Loading loadables from FIT Image at 46000000 ... | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | Data Start: | ||
| + | Data Size: 5066752 Bytes = 4.8 MiB | ||
| + | Hash algo: crc32 | ||
| + | Hash value: | ||
| + | Hash algo: sha1 | ||
| + | Hash value: | ||
| + | | ||
| + | | ||
| + | | ||
| + | Working FDT set to 7e7e4000 | ||
| + | Add ' | ||
| + | |||
| + | Starting kernel ... | ||
| + | |||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | Press the [f] key and hit [enter] to enter failsafe mode | ||
| + | Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | Please press Enter to activate this console. | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | < | ||
| + | </ | ||
| + | </ | ||
| ===== Notes ===== | ===== Notes ===== | ||
| Line 335: | Line 1256: | ||
| ===== Tags ===== | ===== Tags ===== | ||
| - | <WRAP BOX> | ||
| - | FIXME //Add tags below, then remove this fixme.// | ||
| - | </ | ||
| - | [[meta: | + | {{tag>mediatek MT7986 512NAND 1024RAM 5Port GigabitEthernet 2.5GigabitEthernet u-boot 4core 2WNIC 802.11bgn 802.11ax 1usb usb3.1 hwVLAN wifi6 ARMv8 filogic cortexa53 2button 12v_powered serial crypto}} |
| - | {{tag>EXAMPLETAG}} | + | |