This is an old revision of the document!
ZyXEL P-870HW-51a v2
VDSL2 wireless router with 4x100M ethernet ports.
Internal xDSL modem isn't supported
Supported Versions
| Brand | Model | Version | Current Release | OEM Info | Forum Topic | Technical Data |
|---|---|---|---|---|---|---|
| ZyXEL | P-870HW-51a | v2 | 19.07.10 | View/Edit data |
Hardware Highlights
| Model | Version | SoC | CPU MHz | Flash MB | RAM MB | WLAN Hardware | WLAN2.4 | WLAN5.0 | 100M ports | Gbit ports | Modem | USB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P-870HW-51a | v2 | Broadcom BCM6368 | 400 | 4 | 32 | Broadcom BCM4318 | b/g | - | 4 | xDSL | - |
Installation
Installation procedure to be added here.
Hardware
Internals: http://zyxel.tradesp.eu/images/open_870.png Dead link --- tmomas 2018/04/06 09:10
Info
| Architecture: | MIPS |
| Vendor: | Broadcom |
| bootloader: | CFE |
| System-On-Chip: | BCM6368 |
| Board ID: | 96368VVW |
| CPU/Speed | BCM4350 V3.1 / 400MHz |
| Flash size: | 4 MiB |
| Flash-Chip: | cFeon EN29LV320BB-70 |
| RAM: | 32 MiB |
| RAM-Chip: | Winbond W9412G6IH-5? x2 |
| Wireless: | BCM4318 b/g (onboard) |
| Ethernet: | 4x 100M |
| Internet: | VDSL/VDSL2 |
| USB: | No |
| Serial: | Yes |
| JTAG: | Seems no |
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
| Pin | Signal |
|---|---|
| 1 | VCC  DO NOT CONNECT! |
| 2 | TxD |
| 3 | RxD |
| 4 | N/A |
| 5 | GND |
Configure terminal with: baud rate 115200 and 8N1 (8 bits, No parity bit, 1 stop bit)