This is an old revision of the document!
ZyXEL P-870HW-51a v2
VDSL2 wireless router with 4x100M ethernet ports. Wireless supports 802.11b/g
Internal xDSL modem isn't supported
Supported Versions
Supported since r41850 (Barrier Breaker)
Available firmwares
Hardware Highlights
| CPU | Ram | Flash | Network | USB | Serial | JTag |
|---|---|---|---|---|---|---|
| Broadcom 4350 V3.1 | 32MiB | 4MiB | 4x 100M | No | Yes | No? |
Hardware
Internals: http://zyxel.tradesp.eu/images/open_870.png
Info
| Architecture: | MIPS |
| Vendor: | Broadcom |
| bootloader: | CFE |
| System-On-Chip: | BCM6368 |
| Board ID: | 96368VVW |
| CPU/Speed | BCM4350 V3.1 / 400MHz |
| Flash size: | 4 MiB |
| Flash-Chip: | cFeon EN29LV320BB-70 |
| RAM: | 32 MiB |
| RAM-Chip: | Winbond W9412G6IH-5? x2 |
| Wireless: | BCM4318 b/g (onboard) |
| Ethernet: | 4x 100M |
| Internet: | VDSL/VDSL2 |
| USB: | No |
| Serial: | Yes |
| JTAG: | Seems no |
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
| Pin | Signal |
|---|---|
| 1 | VCC |
| 2 | TxD |
| 3 | RxD |
| 4 | N/A |
| 5 | GND |
Configure terminal with: baud rate 115200 and 8N1 (8 bits, No parity bit, 1 stop bit)