Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:zyxel:p-870hn-51b [2016/02/07 10:43] – [Supported Versions] AgenttiXtoh:zyxel:p-870hn-51b [2019/10/17 20:11] – WIP tag added; Broadcom DSL infobox added tmomas
Line 1: Line 1:
 +====== ZyXEL P-870HN-5xb ======
  
 +802.11n Wireless VDSL2 4-port Gateway
 +
 +{{section>meta:infobox:broadcom_dsl#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
 +
 +===== Supported Versions =====
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c
 +filter  : Model*~P-870HN-5*b
 +----
 +
 +---- datatable ----
 +cols    : Model, Unsupported Functions_unsupporteds
 +filter  : Model*~P-870HN-5*b
 +----
 +
 +^ Version/Model ^ Launch Date ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^                                                               
 +|**PARTLY SUPPORTED** (router boots up, but some drivers don't work) |||||
 +
 +  * Chaos Calmer (15.05.1):\\ [[https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/smp/openwrt-15.05.1-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin|openwrt-15.05.1-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin]]
 +  * Chaos Calmer (15.05):\\ [[https://downloads.openwrt.org/chaos_calmer/15.05/brcm63xx/smp/openwrt-15.05-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin|openwrt-15.05-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin]]
 +  * Barrier Breaker (14.07):\\ [[https://downloads.openwrt.org/barrier_breaker/14.07/brcm63xx/generic/openwrt-96368MVWG-generic-squashfs-cfe.bin|openwrt-96368MVWG-generic-squashfs-cfe.bin]]
 +  * Trunk:\\ [[http://downloads.openwrt.org/snapshots/targets/brcm63xx/smp/openwrt-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin|openwrt-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin]]
 +
 +  All these versions have significant bugs:
 +  1) switch - only two middle LAN ports (labelled 2 and 3) work
 +  2) wireless - bcm43222 isn't recognized
 +  3) LED - LED state does not reflect the state of the router
 +
 +SMP-enabled build is required for dual-core support
 +
 +ADSL driver on orginal fw - A2pv6C033a.d23e
 +
 +The Board ID is the same as the [[toh:netgear:dgnd3700|Netgear DGND3700 v1]]
 +
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Model*~P-870HN-5*b
 +----
 +
 +^ model         ^ SoC               ^ Ram     ^ Flash   ^ Network   ^ Modem           ^ USB          ^ Serial   ^ JTag   ^
 +| P-870HN-51b   | BCM6368 @400Mhz   | 32MiB   | 8MiB    | 4x FE     | 1x DSL (rj11)   | Solder(No)   | Yes      | No?    |
 +| P-870HN-53b   | BCM6368 @400Mhz   | 64MiB   | 8MiB    | 4x FE     | 1x DSL (rj45)   | Solder(No)   | Yes      | No?    |
 +
 +
 +The ZyXEL [[toh:zyxel:p-870hw-51a|P-870HW-51a]] is very similar to this model, but has the following differences:
 +
 +  - Wireless: BCM4318 B/G.
 +  - Flash size: 4 MB.
 +  - VDSL capable only.
 +
 +===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : l,c,c
 +filter  : Model*~P-870HN-5*b
 +----
 +
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +
 +FIXME Please add the installation procedure here.
 +
 +At least P-870HN-51b can be flashed directly from OEM web interface.
 +
 +===== Hardware =====
 +Top of the motherboard:
 +^ P-870HN-51b ^ P-870HN-53b ^
 +| {{media:zyxel:p870h:p870hn-51b_board-serial.jpg?400| P-870HN-51b}}  | {{media:zyxel:p870h:p870hn-53b_pcb_top_con_owrt.jpg?400| P-870HN-53b}}|
 +
 +More galleries: [[https://wikidevi.com/wiki/ZyXEL_P-870HN-51b]]
 +
 +==== Info ====
 +^ ^  P-870HN-51b  ^  P-870HN-53b  ^
 +^ [[wp>Instruction set|Architecture]]  |  [[wp>MIPS architecture|MIPS]]  ||
 +^ Vendor                                [[wp>Broadcom]]  ||
 +^ [[docs:techref:bootloader]]          |  [[docs:techref:bootloader:cfe]]  ||
 +^ [[docs:techref:hardware:soc|System-On-Chip]]  |  {{:media:datasheets:bcm6368_product_brief.pdf|}}  ||
 +^ Board ID                              96368MVWG  ||
 +^ [[docs:techref:hardware:cpu|CPU]]/Speed         BCM4350 V3.1 / 400MHz  ||
 +^ Flash size  |  8 MiB  ||
 +^ Flash-Chip  |  [[http://www.macronix.com/Lists/DataSheet/Attachments/1481/MX29LV640E%20T-B,%203V,%2064Mb,%20v1.7.pdf|Macronix MX29LV640EBTI-70G]]  ||
 +^ RAM          32 MiB  |  64MiB  |
 +^ RAM-Chip    |  Winbond W9412G6IH-5? x2  |  ???  |
 +^ Wireless    |  BCM43222KFBG/ 2x2 MIMO for 2,4GHz 802.11b/g/ ||
 +^ [[docs:techref:hardware:switch]]  |  4x FastEthernet10/100  ||
 +^ [[docs:techref:hardware:internet.access.technologies|Modem]]    ADSL2+/VDSL2 (physical port RJ11)  |  ADSL2+/VDSL2 (physical port RJ45)  |
 +^ USB                      |  Yes 2x (SoC) [NOT soldered on PCB]  ||
 +^ [[docs:techref:hardware:port.serial|Serial]]  |  [[#Serial|Yes]]  ||
 +^ [[docs:techref:hardware:port.jtag|JTAG]]      |  Seems no         ||
 +^ FCC ID                                        |  I88P870HN51B  |   |
 +
 +==== Serial ====
 +-> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
 +
 +How to connect to the Serial Port of this specific device:\\
 +**Insert photo of PCB with markings for serial port**
 +
 +<WRAP BOX>
 +FIXME //Replace EXAMPLE by real values.//
 +</WRAP>
 +
 +^ Serial connection parameters\\ for ZyXEL P-870HN-5xb | EXAMPLE 115200, 8N1 |
 +
 +==== CFE ====
 +<code>
 +CFE> athe
 +Available commands:
 +
 +ATSE                show the seed of password generator
 +ATEN                set BootExtension Debug Flag
 +ATSH                dump manufacturer related data in ROM
 +ATER                Erase ROM-D partition
 +ATBR                Reset to default Romfile
 +ATGO                boot router
 +ATSR                system reboot
 +ATHE                print help
 +
 +For more information about a command, enter 'help command-name'
 +*** command status = 0
 +CFE>
 +CFE> ATSH                dump manufacturer related data in ROM
 +
 +ZLD      Version       : V1.10(VFS.0)b3
 +Bootbase Version       : V1.34 | 12/27/2011 22:37:03
 +Vendor Name            : Frontier Communications Corp.
 +Product Model          : P-870HN-51b
 +Serial Number          : S110Y44018146
 +First MAC Address      : C86C875C11A9
 +Last MAC Address       : C86C875C11B2
 +MAC Address Quantity   : 10
 +Default Country Code   : FF
 +Boot Module Debug Flag : 00
 +RootFS      Checksum   : 65ee40b7
 +Kernel      Checksum   : d71645ce
 +RomFile     Checksum   : eba9b27e
 +ImageDefaultChecksum   : 54f14a56
 +Main Feature Bits      : 00
 +Other Feature Bits     :
 +                5a 59 40 16 00 00 00 00-00 00 00 00 00 00 00 00
 +                00 00 00 00 00 00 00 00-00 00 00 00 00 00
 +</code>
 +
 +
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +
 +<WRAP bootlog>
 +<nowiki>CFE version 1.0.37-107.23 for BCM96368 (32bit,SP,BE)
 +Build Date: 12/27/2011 (FuChia@MsgSW4-SerVer)
 +Copyright (C) 2000-2009 Broadcom Corporation.
 +
 +Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
 +Total Flash size: 8192K with 135 sectors
 +Chip ID: BCM6368B2, MIPS: 400MHz
 +Main Thread: TP0
 +Total Memory: 33554432 bytes (32MB)
 +Boot Address: 0xb8000000
 +
 +Checking Reset button on EXT INTR 0
 +Checking Reset button on EXT INTR 0
 +Board IP address                  : 192.168.1.1:ffffff00
 +Host IP address                   : 192.168.1.100
 +Gateway IP address                :
 +Run from flash/host (f/h)         : f
 +Default host run file name        : vmlinux
 +Default host flash file name      : bcm963xx_fs_kernel
 +Boot delay (0-9 seconds)          : 3
 +Board Id (0-15)                   : 96368MVWG
 +Number of MAC Addresses (1-32)    : 10
 +Base MAC Address                  : c8:6c:87:5c:11:a9
 +PSI Size (1-128) KBytes           : 64
 +Enable Backup PSI [0|1]           : 1
 +System Log Size (0-256) KBytes    : 0
 +Main Thread Number [0|1]          : 0
 +
 +*** Press any key to stop auto run (3 seconds) ***
 +Auto run second count down: 0
 +Wait for Multiboot Service Packet...  0
 +Booting from only image (0xb8010000) ...
 +Code Address: 0x80010000, Entry Address: 0x80222300
 +Decompression OK!
 +Entry at 0x80222300
 +Closing network.
 +Disabling Switch ports.
 +Flushing Receive Buffers...
 +0 buffers found.
 +Closing DMA Channels.
 +Starting program at 0x80222300
 +Linux version 2.6.30 (FuChia@MsgSW4-SerVer) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #2 Wed Jan 4 11:38:27 CST 2012
 +Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
 +96368MVWG prom init
 +CPU revision is: 0002a031 (Broadcom4350)
 +Determined physical RAM map:
 + memory: 01f00000 @ 00000000 (usable)
 +Zone PFN ranges:
 +  DMA      0x00000000 -> 0x00001000
 +  Normal   0x00001000 -> 0x00001f00
 +Movable zone start PFN for each node
 +early_node_map[1] active PFN ranges
 +    0: 0x00000000 -> 0x00001f00
 +On node 0 totalpages: 7936
 +free_area_init_node: node 0, pgdat 80295c20, node_mem_map 81000000
 +  DMA zone: 32 pages used for memmap
 +  DMA zone: 0 pages reserved
 +  DMA zone: 4064 pages, LIFO batch:0
 +  Normal zone: 30 pages used for memmap
 +  Normal zone: 3810 pages, LIFO batch:0
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 7874
 +Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
 +wait instruction: enabled
 +Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
 +Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
 +RCU-based detection of stalled CPUs is enabled.
 +NR_IRQS:128
 +PID hash table entries: 128 (order: 7, 512 bytes)
 +console [ttyS0] enabled
 +Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +Memory: 28516k/31744k available (2144k kernel code, 3228k reserved, 445k data, 116k init, 0k highmem)
 +Calibrating delay loop... 399.36 BogoMIPS (lpj=199680)
 +Mount-cache hash table entries: 512
 +net_namespace: 816 bytes
 +NET: Registered protocol family 16
 +Total Flash size: 8192K with 135 sectors
 +registering PCI controller with io_map_base unset
 +bio: create slab <bio-0> at 0
 +pci 0000:00:01.0: reg 10 32bit mmio: [0x000000-0x00ffff]
 +BLOG v2.1 Initialized
 +NET: Registered protocol family 8
 +NET: Registered protocol family 20
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 1024 (order: 1, 8192 bytes)
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP: Hash tables configured (established 1024 bind 1024)
 +TCP reno registered
 +NET: Registered protocol family 1
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +squashfs: version 4.0 with LZMA457 ported by BRCM
 +msgmni has been set to 55
 +io scheduler noop registered (default)
 +PPP generic driver version 2.4.2
 +PPP Deflate Compression module registered
 +PPP BSD Compression module registered
 +NET: Registered protocol family 24
 +bcm963xx_mtd driver v1.0
 +File system address: 0xb8010100
 +brcmboard: brcm_board_init entry
 +SES: Button Interrupt 0x1 is enabled
 +SES: LED GPIO 0x8018 is enabled
 +Serial: BCM63XX driver $Revision: 3.00 $
 +ttyS0 at MMIO 0xb0000100 (irq = 10) is a BCM63XX
 +ttyS1 at MMIO 0xb0000120 (irq = 11) is a BCM63XX
 +bcmxtmrt: Broadcom BCM6368B2 ATM/PTM Network Device v0.3 Jan  4 2012 11:12:01
 +Broadcom Logger v0.1 Jan  4 2012 11:11:09
 +Mirror/redirect action on
 +u32 classifier
 +    input device check on
 +    Actions configured
 +TCP cubic registered
 +Initializing XFRM netlink socket
 +NET: Registered protocol family 17
 +NET: Registered protocol family 15
 +Initializing MCPD Module
 +Ebtables v2.0 registered
 +ebt_time registered
 +ebt_ftos registered
 +ebt_wmm_mark registered
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 +All bugs added by David S. Miller <davem@redhat.com>
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:0.
 +Freeing unused kernel memory: 116k freed
 +init started:  BusyBox v1.00 (2012.01.04-03:14+0000) multi-call binary
 +
 +
 +BusyBox v1.00 (2012.01.04-03:14+0000) Built-in shell (msh)
 +Enter 'help' for a list of built-in commands.
 +
 +
 +Loading drivers and kernel modules...
 +
 +pktflow: module license 'Proprietary' taints kernel.
 +Disabling lock debugging due to kernel taint
 +Broadcom Packet Flow Cache  Char Driver v2.1 Jul 15 2010 09:29:38 Registered<242>
 +NBUFF v1.0 Initialized
 +Broadcom Packet Flow Cache learning via BLOG enabled.
 +Created Proc FS /procfs/fcache
 +Broadcom Packet Flow Cache registered with netdev chain
 +Constructed Broadcom Packet Flow Cache v2.1 Jul 15 2010 09:29:37
 +Broadcom Packet CMF (Experimental) Char Driver v0.1 Jul 15 2010 09:29:34 Registered<232>
 +Broadcom Packet CMF (Experimental) [6368-B2] v0.1 Jul 15 2010 09:29:33 Loaded
 +bcmxtmcfg: bcmxtmcfg_init entry
 +adsl: adsl_init entry
 +Broadcom BCM6368B2 Ethernet Network Device v0.1 Jan  4 2012 11:11:15
 +ETH Init: 180 tx BDs at 0xa18d4000
 +ETH Init: 180 tx BDs at 0xa199c000
 +ETH Init: 400 rx BDs at 0xa19eb000
 +ETH Init: 400 rx BDs at 0xa19fb000
 +dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
 +Broadcom Packet CMF (Experimental) SWC RESET.
 +Broadcom Packet CMF (Experimental) SWC INITIALIZED.
 +Broadcom Packet CMF (Experimental) Forwarder Net Device 0 v0.1 Jul 15 2010 09:29:35 Registered
 +Broadcom Packet CMF (Experimental) Forwarder Net Device 0 v0.1 Jul 15 2010 09:29:35 Registered
 +Broadcom Packet CMF (Experimental) ENABLED.
 +eth0: MAC Address: C8:6C:87:5C:11:A9
 +eth1: MAC Address: C8:6C:87:5C:11:A9
 +eth2: MAC Address: C8:6C:87:5C:11:A9
 +eth3: MAC Address: C8:6C:87:5C:11:A9
 +eth4: MAC Address: C8:6C:87:5C:11:A9
 +PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
 +PCI: Setting latency timer of device 0000:00:01.0 to 64
 +wl:srom not detected,using main memory mapped srom info(wombo board)
 +wl:loading /etc/wlan/bcm43222_map.bin
 +wl0: Broadcom BCMa8d6 802.11 Wireless Controller 5.60.120.11.cpe4.06L02.1
 +dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
 +IRQ 21/brcm_21: IRQF_DISABLED is not guaranteed on shared IRQs
 +p8021ag: p8021ag_init entry
 +Broadcom 802.1Q VLAN Interface, v0.1
 +
 +===== Release Version 4.06L.02 (build timestamp 120104_1421) =====
 +
 +Sun Jan  1 00:00:00 UTC 2012
 +update Persistent size = 24029, offset = 0
 +update BackupPsi size = 24029, offset = 0
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +Netfilter messages via NETLINK v0.30.
 +nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
 +dhcpd:error:12.771:set_iface_config_defaults:621:SIOCGIFADDR failed on br0!
 +xt_time: kernel timezone is -0000
 +iptables: Bad rule (does a matching rule exist in that chain?)
 +Sntp: Using new rule EST5EDT,M3.2.0/2,M11.1.0/2
 +device eth0.0 entered promiscuous mode
 +device eth0 entered promiscuous mode
 +br0: port 1(eth0.0) entering forwarding state
 +device eth0 is not a slave of br0
 +Created new Tag Rule: dev=eth0, dir=1, tags=0, id=0
 +
 +Created new Tag Rule: dev=eth0, dir=1, tags=1, id=0
 +
 +Created new Tag Rule: dev=eth0, dir=1, tags=2, id=0
 +
 +Broadcom Packet Flow Cache flushing the flows
 +device eth1.0 entered promiscuous mode
 +device eth1 entered promiscuous mode
 +br0: port 2(eth1.0) entering forwarding state
 +device eth1 is not a slave of br0
 +Created new Tag Rule: dev=eth1, dir=1, tags=0, id=0
 +
 +Created new Tag Rule: dev=eth1, dir=1, tags=1, id=0
 +
 +Created new Tag Rule: dev=eth1, dir=1, tags=2, id=0
 +
 +Broadcom Packet Flow Cache flushing the flows
 +device eth2.0 entered promiscuous mode
 +device eth2 entered promiscuous mode
 +br0: port 3(eth2.0) entering forwarding state
 +device eth2 is not a slave of br0
 +Created new Tag Rule: dev=eth2, dir=1, tags=0, id=0
 +
 +Created new Tag Rule: dev=eth2, dir=1, tags=1, id=0
 +
 +Created new Tag Rule: dev=eth2, dir=1, tags=2, id=0
 +
 +Broadcom Packet Flow Cache flushing the flows
 +device eth3.0 entered promiscuous mode
 +device eth3 entered promiscuous mode
 +br0: port 4(eth3.0) entering forwarding state
 +device eth3 is not a slave of br0
 +Created new Tag Rule: dev=eth3, dir=1, tags=0, id=0
 +
 +Created new Tag Rule: dev=eth3, dir=1, tags=1, id=0
 +
 +Created new Tag Rule: dev=eth3, dir=1, tags=2, id=0
 +
 +Broadcom Packet Flow Cache flushing the flows
 +WLmngr Daemon is running
 +optarg=0 shmId=0
 +BcmAdsl_Initialize=0xC00F8E2C, g_pFnNotifyCallback=0xC0128AF4
 +wlevt_init@107: opened loopback socket 4
 +wlevt is ready for new msg...
 +Clocks for QPROC and AFE are being aligned with step through ...
 +AFE is aligned, i = 067, PhaseValue = -050, PhaseCntl = 0x3FBD0000
 +QPROC is aligned, i = 068, PhaseValue = -150, PhaseCntl = 0x3FBD7FBD
 +Clocks for QPROC and AFE are aligned with syn_status AFE = 0x70, QPROC = 0x78
 +AFE  phase control reg @0xb0f570f8 default actual = 0x0021C38F, exp = 0x0021c38f
 +QPRC phase control reg @0xb0f5f0c0 default actual = 0x0421C38F, exp = 0x0421c38f
 +pSdramPHY=0xA1FFFFF8, 0x11541401 0x572DBFEF
 +*** XfaceOffset: 0x5FF90 => 0x5FF90 ***
 +*** PhySdramSize got adjusted: 0xBDAC0 => 0xEB1E0 ***
 +AdslCoreSharedMemInit: shareMemAvailable=85504
 +AdslCoreHwReset: pLocSbSta=80428000 bkupThreshold=3072
 +AdslCoreHwReset:  AdslOemDataAddr = 0xA1FB3438
 +dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
 +XTM Init: 400 rx BDs at 0xa09bd000
 +XTM Init: 100 rx BDs at 0xa0917800
 +
 + PROGRAM : VcAutoHunt main > ENTER
 +/var/cert/acscert2.cacert: cannot open
 +ln: /var/cert/bdbefb5f.0: File exists
 +Broadcom Packet CMF (Experimental) ENABLED.
 +Broadcom Packet Flow Cache learning via BLOG enabled.
 +Broadcom Packet Flow Cache flushing the flows
 +monitor task is initialized pid= 191
 +General UPnP daemon is ready to run with NATT 1
 +Switch MDK: num_switches = 1
 +Switch MDK: unit = 0; phy_pbmp = 0x1f; config_pbmp = 0x1f
 +Switch MDK link poll thread: unit=0; phypbmp=0x1f
 +eth4 Link UP -1 mbps half duplex
 +update Persistent size = 24029, offset = 0
 +update BackupPsi size = 24029, offset = 0
 +update Persistent size = 23956, offset = 0
 +update BackupPsi size = 23956, offset = 0
 +There is no Predefined DevicePin in CFE
 +WPS Device PIN = 17258227
 +Setting SSID: "FrontierHSI"
 +Setting SSID: "wl0_Guest1"
 +Setting SSID: "wl0_Guest2"
 +Setting SSID: "wl0_Guest3"
 +
 +
 +
 +
 +version
 +Frontier P-870HN-51b
 +Login: admin
 +Password:
 +update Persistent size = 24303, offset = 0
 +update BackupPsi size = 24303, offset = 0
 + > cat /proc/cpuinfo
 +system type             : 96368MVWG
 +processor               : 0
 +cpu model               : Broadcom4350 V3.1
 +BogoMIPS                : 399.36
 +wait instruction        : yes
 +microsecond timers      : yes
 +tlb_entries             : 32
 +extra interrupt vector  : no
 +hardware watchpoint     : no
 +ASEs implemented        :
 +shadow register sets    : 1
 +core                    : 0
 +VCED exceptions         : not available
 +VCEI exceptions         : not available
 +
 +unaligned exceptions            : 21
 + >
 +
 +
 +
 +
 + > cat /proc/version
 +Linux version 2.6.30 (FuChia@MsgSW4-SerVer) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #2 Wed Jan 4 11:38:27 CST 2012
 + > free
 +consoled:error:333.883:processInput:507:unrecognized command free
 + > Line 0: xDSL G.994 training
 +cat /proc/meminfo Line 0: ADSL link down
 +bcmxtmcfg: XTM Link Information, portid = 0, State = DOWN, Service Support = PTM
 +Broadcom Packet CMF (Experimental) SWC FLUSHED.
 +bcmxtmcfg: Reinitialize port 0 traffictype 2
 +bcmxtmcfg: Normal(XTM/PTM) Mode enabled
 +
 +MemTotal:          28632 kB
 +MemFree:            1868 kB
 +Buffers:            2696 kB
 +Cached:             8772 kB
 +SwapCached:            0 kB
 +Active:             3804 kB
 +Inactive:           9948 kB
 +Active(anon):        904 kB
 +Inactive(anon):     1380 kB
 +Active(file):       2900 kB
 +Inactive(file):     8568 kB
 +SwapTotal:             0 kB
 +SwapFree:              0 kB
 +Dirty:                 0 kB
 +Writeback:             0 kB
 +AnonPages:          2304 kB
 +Mapped:             2916 kB
 +Slab:               9260 kB
 +SReclaimable:        420 kB
 +SUnreclaim:         8840 kB
 +PageTables:          280 kB
 +NFS_Unstable:          0 kB
 +Bounce:                0 kB
 +WritebackTmp:          0 kB
 +CommitLimit:       14316 kB
 +Committed_AS:       6308 kB
 +VmallocTotal:    1032148 kB
 +VmallocUsed:        3420 kB
 +VmallocChunk:    1022260 kB
 + > cat /proc/mtd
 +dev:    size   erasesize  name
 +mtd0: 0049a000 0049a000 "Physically mapped flash"
 + > cat /proc/interrupts
 +           CPU0
 +  7:     364626         BCM63xx  timer
 + 10:        324         BCM63xx  brcm_10
 + 12:       2789         BCM63xx  brcm_12
 + 21:          0         BCM63xx  brcm_21
 + 22:          0         BCM63xx  brcm_22
 + 23:          0         BCM63xx  brcm_23
 + 28:          0         BCM63xx  brcm_28
 + 29:          0         BCM63xx  brcm_29
 + 40:          0         BCM63xx  brcm_40
 + 41:          0         BCM63xx  brcm_41
 + 42:          0         BCM63xx  brcm_42
 + 48:          0         BCM63xx  brcm_48
 + 49:          0         BCM63xx  brcm_49
 + 50:          0         BCM63xx  brcm_50
 +
 +ERR:          0
 + > dmesg
 +consoled:error:370.114:processInput:507:unrecognized command dmesg
 + >
 +
 +
 +
 + > help
 +?
 +help
 +logout
 +exit
 +quit
 +reboot
 +df
 +meminfo
 +kill
 +echo
 +ifconfig
 +ping
 +ps
 +pwd
 +sysinfo
 +tftp
 +wlctl
 +arp
 +lan
 +lanhosts
 +restoredefault
 +save
 +swversion
 +wlan
 +tr064
 +cfm
 +vcautohunt
 +dhcpcondserv
 +captiveurl
 + > meminfo
 +Total MDM Shared Memory Region : 1024KB
 +Shared Memory Usable           : 000929KB
 +Shared Memory in-use           : 000117KB
 +Shared Memory free             : 000812KB
 +Shared Memory allocs           : 023067
 +Shared Memory frees            : 021132
 +Shared Memory alloc/free delta : 001935
 +
 +Heap bytes in-use     : 000016
 +Heap allocs           : 000914
 +Heap frees            : 000913
 +Heap alloc/free delta : 000001
 + > ifconfig
 +bcmsw           Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +                Base address:0x6a00
 +
 +br0             Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                inet addr:192.168.254.254  Bcast:192.168.254.255  Mask:255.255.255.0
 +                UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9646 (9.4 KiB)
 +
 +eth0            Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +eth0.0          Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9706 (9.4 KiB)
 +
 +eth1            Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +
 +eth1.0          Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9586 (9.3 KiB)
 +
 +eth2            Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +
 +eth2.0          Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9466 (9.2 KiB)
 +
 +eth3            Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +
 +eth3.0          Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9346 (9.1 KiB)
 +
 +lo              Link encap:Local Loopback
 +                inet addr:127.0.0.1  Mask:255.0.0.0
 +                UP LOOPBACK RUNNING  MTU:16436  Metric:1
 +                RX packets:90 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:6606 (6.4 KiB)  TX bytes:6606 (6.4 KiB)
 +
 +sar             Link encap:UNSPEC  HWaddr FE-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-00
 +                UP NOTRAILERS RUNNING NOARP  MTU:0  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +                Interrupt:50 Base address:0x5220
 +
 +swc             Link encap:UNSPEC  HWaddr FE-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-00
 +                UP NOTRAILERS RUNNING NOARP  MTU:0  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +                Interrupt:42 Base address:0x6a40
 +
 + > sysconfig
 +consoled:error:175.526:processInput:507:unrecognized command sysconfig
 + > sysinfo
 +Number of processes: 42
 + 12:03am  up 3 min,
 +load average: 1 min:0.03, 5 min:0.07, 15 min:0.03
 +              total         used         free       shared      buffers
 +  Mem:        28632        26536         2096            0         2696
 + Swap:            0            0            0
 +Total:        28632        26536         2096
 + > swversion
 +Usage: swversion show
 +       swversion help
 + > swversion show
 +1.10(VFS.0)b3
 + ></nowiki>
 +</WRAP>\\
 +
 +
 +==== OpenWrt bootlog ====
 +
 +<WRAP bootlog>
 +<nowiki>
 + > tftp
 +BusyBox v1.00 (2012.01.04-03:14+0000) multi-call binary
 +
 +Usage: tftp [-p|-g] [-t i|c] [-f filename] tftp_server_ip
 +
 +Update firmware image and configuration data from OR backup configuration
 +data to a tftp server.
 +
 +Examples:
 +-g -t i -f filename server_ip   Get (flash) broadcom or whole image to modem
 +-g -t c -f filename server_ip   Get (flash) config file to modem
 +-p -f filename server_ip        Put (backup) config file to [[docs:guide-user:troubleshooting:tftpserver|tftpd server]]
 +
 +
 + > tftp -g -t i -f openwrt-96368MVWG-generic-squashfs-cfe.bin 192.168.254.33
 +exit mcpd!!
 +MemTotal:          28632 kB
 +MemFree:           11364 kB
 +Buffers:             152 kB
 +Cached:             2908 kB
 +SwapCached:            0 kB
 +Active:             2336 kB
 +Inactive:           2216 kB
 +Active(anon):        628 kB
 +Inactive(anon):      864 kB
 +Active(file):       1708 kB
 +Inactive(file):     1352 kB
 +SwapTotal:             0 kB
 +SwapFree:              0 kB
 +Dirty:                 0 kB
 +Writeback:             0 kB
 +AnonPages:          1512 kB
 +Mapped:             2636 kB
 +Slab:               9088 kB
 +SReclaimable:        264 kB
 +SUnreclaim:         8824 kB
 +PageTables:          184 kB
 +NFS_Unstable:          0 kB
 +Bounce:                0 kB
 +WritebackTmp:          0 kB
 +CommitLimit:       14316 kB
 +Committed_AS:       3960 kB
 +VmallocTotal:    1032148 kB
 +VmallocUsed:        3420 kB
 +VmallocChunk:    1022260 kB
 +Allocating 8388628 bytes for flash image.
 +Memory allocated
 +Got image via tftp, total image size: 3276804
 +tftp:error:556.544:verifyZyXELModelId:143:Not find ZyXEL identify, just fall through
 +Flashing root file system and kernel...
 +....................................................
 +
 +****** DDR->DSLCorePhaseCntl=0 ******
 +
 +ý
 +
 +CFE version 1.0.37-107.23 for BCM96368 (32bit,SP,BE)
 +Build Date: 12/27/2011 (FuChia@MsgSW4-SerVer)
 +Copyright (C) 2000-2009 Broadcom Corporation.
 +
 +Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
 +Total Flash size: 8192K with 135 sectors
 +Chip ID: BCM6368B2, MIPS: 400MHz
 +Main Thread: TP0
 +Total Memory: 33554432 bytes (32MB)
 +Boot Address: 0xb8000000
 +
 +Checking Reset button on EXT INTR 0
 +Checking Reset button on EXT INTR 0
 +Board IP address                  : 192.168.1.1:ffffff00
 +Host IP address                   : 192.168.1.100
 +Gateway IP address                :
 +Run from flash/host (f/h)         : f
 +Default host run file name        : vmlinux
 +Default host flash file name      : bcm963xx_fs_kernel
 +Boot delay (0-9 seconds)          : 3
 +Board Id (0-15)                   : 96368MVWG
 +Number of MAC Addresses (1-32)    : 10
 +Base MAC Address                  : c8:6c:87:5c:11:a9
 +PSI Size (1-128) KBytes           : 64
 +Enable Backup PSI [0|1]           : 1
 +System Log Size (0-256) KBytes    : 0
 +Main Thread Number [0|1]          : 0
 +
 +*** Press any key to stop auto run (3 seconds) ***
 +Auto run second count down: 0
 +Wait for Multiboot Service Packet...  0
 +Booting from only image (0xb8010000) ...
 +Code Address: 0x80010000, Entry Address: 0x80010000
 +LZMA: Prossible old LZMA format, trying to decompress..
 +Decompression OK!
 +Entry at 0x80010000
 +Closing network.
 +Disabling Switch ports.
 +Flushing Receive Buffers...
 +1 buffers found.
 +Closing DMA Channels.
 +Starting program at 0x80010000
 +[    0.000000] Linux version 3.10.21 (thepeople@trabant) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38990) ) #1 Tue Dec 3 08:27:54 CET 2013
 +[    0.000000] Detected Broadcom 0x6368 CPU revision b2
 +[    0.000000] CPU frequency is 400 MHz
 +[    0.000000] 32MB of RAM installed
 +[    0.000000] registering 38 GPIOs
 +[    0.000000] board_bcm963xx: Boot address 0xb8000000
 +[    0.000000] board_bcm963xx: CFE version: 1.0.37-107.23
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
 +[    0.000000] board_bcm963xx: board name: 96368MVWG
 +[    0.000000] Determined physical RAM map:
 +[    0.000000]  memory: 02000000 @ 00000000 (usable)
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Zone ranges:
 +[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
 +[    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
 +[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
 +[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
 +[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +[    0.000000] Memory: 28752k/32768k available (2440k kernel code, 4016k reserved, 704k data, 244k init, 0k highmem)
 +[    0.000000] NR_IRQS:128
 +[    0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
 +[    0.032000] pid_max: default: 32768 minimum: 301
 +[    0.036000] Mount-cache hash table entries: 512
 +[    0.044000] NET: Registered protocol family 16
 +[    0.052000] registering PCI controller with io_map_base unset
 +[    0.056000] registering PCI controller with io_map_base unset
 +[    0.064000] bio: create slab <bio-0> at 0
 +[    0.068000] PCI host bridge to bus 0000:00
 +[    0.072000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
 +[    0.076000] pci_bus 0000:00: root bus resource [io  0x8000000-0x8007fff]
 +[    0.080000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
 +[    0.096000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
 +[    0.100000] PCI host bridge to bus 0000:01
 +[    0.104000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
 +[    0.108000] pci_bus 0000:01: root bus resource [io  0x8008000-0x800ffff]
 +[    0.112000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
 +[    0.116000] pci 0000:01:1e.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +[    0.120000] pci 0000:01:1e.0: BAR 10: assigned [mem 0x38000000-0x3fffffff]
 +[    0.124000] pci 0000:01:1e.0: BAR 7: assigned [io  0x8008000-0x80080ff]
 +[    0.128000] pci 0000:01:1e.0: BAR 8: assigned [io  0x8008400-0x80084ff]
 +[    0.132000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
 +[    0.136000] pci 0000:01:1e.0:   bridge window [io  0x8008000-0x80080ff]
 +[    0.140000] pci 0000:01:1e.0:   bridge window [io  0x8008400-0x80084ff]
 +[    0.144000] pci 0000:01:1e.0:   bridge window [mem 0x38000000-0x3fffffff]
 +[    0.148000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)
 +[    0.152000] Switching to clocksource MIPS
 +[    0.160000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
 +[    0.188000] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
 +[    0.252000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
 +[    0.260000] NET: Registered protocol family 2
 +[    0.264000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
 +[    0.272000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
 +[    0.280000] TCP: Hash tables configured (established 512 bind 512)
 +[    0.284000] TCP: reno registered
 +[    0.288000] UDP hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.296000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.304000] NET: Registered protocol family 1
 +[    0.308000] audit: initializing netlink socket (disabled)
 +[    0.316000] type=2000 audit(0.316:1): initialized
 +[    0.320000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    0.324000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    0.336000] msgmni has been set to 56
 +[    0.340000] io scheduler noop registered
 +[    0.344000] io scheduler deadline registered (default)
 +Ę[    0.360000] console [ttyS0] enabled, bootconsole disabled= 10) is a bcm63xx_uart
 +[    0.360000] console [ttyS0] enabled, bootconsole disabled
 +[    0.372000] bcm63xx-rng bcm63xx-rng: registered RNG driver
 +[    0.380000] physmap platform flash device: 08000000 at 18000000
 +[    0.384000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
 +[    0.396000] Amd/Fujitsu Extended Query Table at 0x0040
 +[    0.400000]   Amd/Fujitsu Extended Query version 1.1.
 +[    0.408000] number of CFI chips: 1
 +[    0.412000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368MVWG
 +[    0.420000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
 +[    0.424000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
 +[    0.432000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length 6c0000
 +[    0.440000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
 +[    0.448000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
 +[    0.456000] bcm63xxpart: Spare partition is offset 330004 and length 4bfffc
 +[    0.460000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
 +[    0.468000] Creating 5 MTD partitions on "physmap-flash.0":
 +[    0.476000] 0x000000000000-0x000000010000 : "CFE"
 +[    0.480000] 0x000000010100-0x000000130000 : "kernel"
 +[    0.488000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
 +[    0.500000] 0x000000130000-0x0000007f0000 : "rootfs"
 +[    0.508000] mtd: device 2 (rootfs) set to be root filesystem
 +[    0.512000] mtd: partition "rootfs_data" created automatically, ofs=0x330000, len=0x4c0000
 +[    0.520000] 0x000000330000-0x0000007f0000 : "rootfs_data"
 +[    0.528000] 0x0000007f0000-0x000000800000 : "nvram"
 +[    0.536000] 0x000000010000-0x0000007f0000 : "linux"
 +[    0.544000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
 +[    0.592000] b53_common: found switch: BCM63xx, rev 0
 +[    0.596000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
 +[    0.608000] TCP: cubic registered
 +[    0.608000] NET: Registered protocol family 17
 +[    0.616000] Bridge firewalling registered
 +[    0.620000] 8021q: 802.1Q VLAN Support v1.8
 +[    0.632000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
 +[    0.640000] Freeing unused kernel memory: 244K (80323000 - 80360000)
 +procd: Console is alive
 +procd: - watchdog -
 +procd: - preinit -
 +ifconfig: SIOCGIFFLAGS: No such device
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +[    4.428000] Button Hotplug driver version 0.4.1
 +mount_root: jffs2 is not ready - EOF marker found
 +ifconfig: SIOCGIFFLAGS: No such device
 +procd: - early -
 +procd: - watchdog -
 +procd: - ubus -
 +procd: - init -
 +Please press Enter to activate this console.
 +[    8.292000] NET: Registered protocol family 10
 +[    8.316000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
 +[    8.332000] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +[    8.356000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093
 +[    8.364000] Backport generated by backports.git backports-20130802-0-gdb67a3f
 +[    8.376000] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[    8.436000] xt_time: kernel timezone is -0000
 +[    8.468000] cfg80211: Calling CRDA to update world regulatory domain
 +[    8.488000] cfg80211: World regulatory domain updated:
 +[    8.492000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
 +[    8.500000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
 +[    8.508000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
 +[    8.516000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
 +[    8.524000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
 +[    8.532000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
 +[    8.540000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
 +[    8.652000] PPP generic driver version 2.4.2
 +[    8.660000] NET: Registered protocol family 24
 +[    8.704000] b43-phy0: Broadcom 43222 WLAN found (core revision 16)
 +[    8.756000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
 +[    8.788000] Broadcom 43xx driver loaded [ Features: PNL ]
 +[   16.752000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
 +[   16.772000] jffs2_build_filesystem(): unlocking the mtd device... done.
 +[   16.776000] jffs2_build_filesystem(): erasing all blocks after the end marker... [   17.472000] device eth0.1 entered promiscuous mode
 +[   17.476000] device eth0 entered promiscuous mode
 +[   17.488000] br-lan: port 1(eth0.1) entered forwarding state
 +[   17.492000] br-lan: port 1(eth0.1) entered forwarding state
 +[   18.460000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
 +[   19.496000] br-lan: port 1(eth0.1) entered forwarding state
 +done.
 +[   58.092000] jffs2: notice: (547) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
 +procd: - init complete -
 +
 +
 +
 +BusyBox v1.19.4 (2013-12-03 08:14:57 CET) built-in shell (ash)
 +Enter 'help' for a list of built-in commands.
 +
 +  _______                     ________        __
 +       |.-----.-----.-----.|  |  |  |.----.|  |_
 +     ||  _  |  -__|     ||  |  |  ||   _||   _|
 + |_______||   __|_____|__|__||________||__|  |____|
 +          |__| W I R E L E S S   F R E E D O M
 + -----------------------------ujjjjjjjj
 +                                        BARRIER BREAKER (Bleeding Edge, r38990)
 + -----------------------------------------------------
 +  * 1/2 oz Galliano         Pour all ingredients into
 +  * 4 oz cold Coffee        an irish coffee mug filled
 +  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
 +  * 2 tsp. Creme de Cacao
 + -----------------------------------------------------
 +root@OpenWrt:/#
 +</nowiki>
 +</WRAP>\\
 +
 +OpenWrt debug level 4 pastebin: [[http://pastebin.com/KCBeMZif]]
 +
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>bcm63xx bcm6368 FastEthernet 4Port 2nic 2Ant DetachableAntenna InternalAntenna 32RAM 64RAM 8Flash xDSL ADSL2+ VDSL VDSL2 MIPS MIPS32 802.11bgn trng WIP}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1