Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:zyxel:p-870hn-51b [2014/09/10 12:12] comixf1toh:zyxel:p-870hn-51b [2019/10/17 20:11] – WIP tag added; Broadcom DSL infobox added tmomas
Line 1: Line 1:
 +====== ZyXEL P-870HN-5xb ======
  
 +802.11n Wireless VDSL2 4-port Gateway
 +
 +{{section>meta:infobox:broadcom_dsl#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
 +
 +===== Supported Versions =====
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c
 +filter  : Model*~P-870HN-5*b
 +----
 +
 +---- datatable ----
 +cols    : Model, Unsupported Functions_unsupporteds
 +filter  : Model*~P-870HN-5*b
 +----
 +
 +^ Version/Model ^ Launch Date ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^                                                               
 +|**PARTLY SUPPORTED** (router boots up, but some drivers don't work) |||||
 +
 +  * Chaos Calmer (15.05.1):\\ [[https://downloads.openwrt.org/chaos_calmer/15.05.1/brcm63xx/smp/openwrt-15.05.1-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin|openwrt-15.05.1-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin]]
 +  * Chaos Calmer (15.05):\\ [[https://downloads.openwrt.org/chaos_calmer/15.05/brcm63xx/smp/openwrt-15.05-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin|openwrt-15.05-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin]]
 +  * Barrier Breaker (14.07):\\ [[https://downloads.openwrt.org/barrier_breaker/14.07/brcm63xx/generic/openwrt-96368MVWG-generic-squashfs-cfe.bin|openwrt-96368MVWG-generic-squashfs-cfe.bin]]
 +  * Trunk:\\ [[http://downloads.openwrt.org/snapshots/targets/brcm63xx/smp/openwrt-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin|openwrt-brcm63xx-smp-96368MVWG-generic-squashfs-cfe.bin]]
 +
 +  All these versions have significant bugs:
 +  1) switch - only two middle LAN ports (labelled 2 and 3) work
 +  2) wireless - bcm43222 isn't recognized
 +  3) LED - LED state does not reflect the state of the router
 +
 +SMP-enabled build is required for dual-core support
 +
 +ADSL driver on orginal fw - A2pv6C033a.d23e
 +
 +The Board ID is the same as the [[toh:netgear:dgnd3700|Netgear DGND3700 v1]]
 +
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Model*~P-870HN-5*b
 +----
 +
 +^ model         ^ SoC               ^ Ram     ^ Flash   ^ Network   ^ Modem           ^ USB          ^ Serial   ^ JTag   ^
 +| P-870HN-51b   | BCM6368 @400Mhz   | 32MiB   | 8MiB    | 4x FE     | 1x DSL (rj11)   | Solder(No)   | Yes      | No?    |
 +| P-870HN-53b   | BCM6368 @400Mhz   | 64MiB   | 8MiB    | 4x FE     | 1x DSL (rj45)   | Solder(No)   | Yes      | No?    |
 +
 +
 +The ZyXEL [[toh:zyxel:p-870hw-51a|P-870HW-51a]] is very similar to this model, but has the following differences:
 +
 +  - Wireless: BCM4318 B/G.
 +  - Flash size: 4 MB.
 +  - VDSL capable only.
 +
 +===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : l,c,c
 +filter  : Model*~P-870HN-5*b
 +----
 +
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +
 +FIXME Please add the installation procedure here.
 +
 +At least P-870HN-51b can be flashed directly from OEM web interface.
 +
 +===== Hardware =====
 +Top of the motherboard:
 +^ P-870HN-51b ^ P-870HN-53b ^
 +| {{media:zyxel:p870h:p870hn-51b_board-serial.jpg?400| P-870HN-51b}}  | {{media:zyxel:p870h:p870hn-53b_pcb_top_con_owrt.jpg?400| P-870HN-53b}}|
 +
 +More galleries: [[https://wikidevi.com/wiki/ZyXEL_P-870HN-51b]]
 +
 +==== Info ====
 +^ ^  P-870HN-51b  ^  P-870HN-53b  ^
 +^ [[wp>Instruction set|Architecture]]  |  [[wp>MIPS architecture|MIPS]]  ||
 +^ Vendor                                [[wp>Broadcom]]  ||
 +^ [[docs:techref:bootloader]]          |  [[docs:techref:bootloader:cfe]]  ||
 +^ [[docs:techref:hardware:soc|System-On-Chip]]  |  {{:media:datasheets:bcm6368_product_brief.pdf|}}  ||
 +^ Board ID                              96368MVWG  ||
 +^ [[docs:techref:hardware:cpu|CPU]]/Speed         BCM4350 V3.1 / 400MHz  ||
 +^ Flash size  |  8 MiB  ||
 +^ Flash-Chip  |  [[http://www.macronix.com/Lists/DataSheet/Attachments/1481/MX29LV640E%20T-B,%203V,%2064Mb,%20v1.7.pdf|Macronix MX29LV640EBTI-70G]]  ||
 +^ RAM          32 MiB  |  64MiB  |
 +^ RAM-Chip    |  Winbond W9412G6IH-5? x2  |  ???  |
 +^ Wireless    |  BCM43222KFBG/ 2x2 MIMO for 2,4GHz 802.11b/g/ ||
 +^ [[docs:techref:hardware:switch]]  |  4x FastEthernet10/100  ||
 +^ [[docs:techref:hardware:internet.access.technologies|Modem]]    ADSL2+/VDSL2 (physical port RJ11)  |  ADSL2+/VDSL2 (physical port RJ45)  |
 +^ USB                      |  Yes 2x (SoC) [NOT soldered on PCB]  ||
 +^ [[docs:techref:hardware:port.serial|Serial]]  |  [[#Serial|Yes]]  ||
 +^ [[docs:techref:hardware:port.jtag|JTAG]]      |  Seems no         ||
 +^ FCC ID                                        |  I88P870HN51B  |   |
 +
 +==== Serial ====
 +-> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
 +
 +How to connect to the Serial Port of this specific device:\\
 +**Insert photo of PCB with markings for serial port**
 +
 +<WRAP BOX>
 +FIXME //Replace EXAMPLE by real values.//
 +</WRAP>
 +
 +^ Serial connection parameters\\ for ZyXEL P-870HN-5xb | EXAMPLE 115200, 8N1 |
 +
 +==== CFE ====
 +<code>
 +CFE> athe
 +Available commands:
 +
 +ATSE                show the seed of password generator
 +ATEN                set BootExtension Debug Flag
 +ATSH                dump manufacturer related data in ROM
 +ATER                Erase ROM-D partition
 +ATBR                Reset to default Romfile
 +ATGO                boot router
 +ATSR                system reboot
 +ATHE                print help
 +
 +For more information about a command, enter 'help command-name'
 +*** command status = 0
 +CFE>
 +CFE> ATSH                dump manufacturer related data in ROM
 +
 +ZLD      Version       : V1.10(VFS.0)b3
 +Bootbase Version       : V1.34 | 12/27/2011 22:37:03
 +Vendor Name            : Frontier Communications Corp.
 +Product Model          : P-870HN-51b
 +Serial Number          : S110Y44018146
 +First MAC Address      : C86C875C11A9
 +Last MAC Address       : C86C875C11B2
 +MAC Address Quantity   : 10
 +Default Country Code   : FF
 +Boot Module Debug Flag : 00
 +RootFS      Checksum   : 65ee40b7
 +Kernel      Checksum   : d71645ce
 +RomFile     Checksum   : eba9b27e
 +ImageDefaultChecksum   : 54f14a56
 +Main Feature Bits      : 00
 +Other Feature Bits     :
 +                5a 59 40 16 00 00 00 00-00 00 00 00 00 00 00 00
 +                00 00 00 00 00 00 00 00-00 00 00 00 00 00
 +</code>
 +
 +
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +
 +<WRAP bootlog>
 +<nowiki>CFE version 1.0.37-107.23 for BCM96368 (32bit,SP,BE)
 +Build Date: 12/27/2011 (FuChia@MsgSW4-SerVer)
 +Copyright (C) 2000-2009 Broadcom Corporation.
 +
 +Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
 +Total Flash size: 8192K with 135 sectors
 +Chip ID: BCM6368B2, MIPS: 400MHz
 +Main Thread: TP0
 +Total Memory: 33554432 bytes (32MB)
 +Boot Address: 0xb8000000
 +
 +Checking Reset button on EXT INTR 0
 +Checking Reset button on EXT INTR 0
 +Board IP address                  : 192.168.1.1:ffffff00
 +Host IP address                   : 192.168.1.100
 +Gateway IP address                :
 +Run from flash/host (f/h)         : f
 +Default host run file name        : vmlinux
 +Default host flash file name      : bcm963xx_fs_kernel
 +Boot delay (0-9 seconds)          : 3
 +Board Id (0-15)                   : 96368MVWG
 +Number of MAC Addresses (1-32)    : 10
 +Base MAC Address                  : c8:6c:87:5c:11:a9
 +PSI Size (1-128) KBytes           : 64
 +Enable Backup PSI [0|1]           : 1
 +System Log Size (0-256) KBytes    : 0
 +Main Thread Number [0|1]          : 0
 +
 +*** Press any key to stop auto run (3 seconds) ***
 +Auto run second count down: 0
 +Wait for Multiboot Service Packet...  0
 +Booting from only image (0xb8010000) ...
 +Code Address: 0x80010000, Entry Address: 0x80222300
 +Decompression OK!
 +Entry at 0x80222300
 +Closing network.
 +Disabling Switch ports.
 +Flushing Receive Buffers...
 +0 buffers found.
 +Closing DMA Channels.
 +Starting program at 0x80222300
 +Linux version 2.6.30 (FuChia@MsgSW4-SerVer) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #2 Wed Jan 4 11:38:27 CST 2012
 +Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
 +96368MVWG prom init
 +CPU revision is: 0002a031 (Broadcom4350)
 +Determined physical RAM map:
 + memory: 01f00000 @ 00000000 (usable)
 +Zone PFN ranges:
 +  DMA      0x00000000 -> 0x00001000
 +  Normal   0x00001000 -> 0x00001f00
 +Movable zone start PFN for each node
 +early_node_map[1] active PFN ranges
 +    0: 0x00000000 -> 0x00001f00
 +On node 0 totalpages: 7936
 +free_area_init_node: node 0, pgdat 80295c20, node_mem_map 81000000
 +  DMA zone: 32 pages used for memmap
 +  DMA zone: 0 pages reserved
 +  DMA zone: 4064 pages, LIFO batch:0
 +  Normal zone: 30 pages used for memmap
 +  Normal zone: 3810 pages, LIFO batch:0
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 7874
 +Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
 +wait instruction: enabled
 +Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
 +Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
 +RCU-based detection of stalled CPUs is enabled.
 +NR_IRQS:128
 +PID hash table entries: 128 (order: 7, 512 bytes)
 +console [ttyS0] enabled
 +Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +Memory: 28516k/31744k available (2144k kernel code, 3228k reserved, 445k data, 116k init, 0k highmem)
 +Calibrating delay loop... 399.36 BogoMIPS (lpj=199680)
 +Mount-cache hash table entries: 512
 +net_namespace: 816 bytes
 +NET: Registered protocol family 16
 +Total Flash size: 8192K with 135 sectors
 +registering PCI controller with io_map_base unset
 +bio: create slab <bio-0> at 0
 +pci 0000:00:01.0: reg 10 32bit mmio: [0x000000-0x00ffff]
 +BLOG v2.1 Initialized
 +NET: Registered protocol family 8
 +NET: Registered protocol family 20
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 1024 (order: 1, 8192 bytes)
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP: Hash tables configured (established 1024 bind 1024)
 +TCP reno registered
 +NET: Registered protocol family 1
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +squashfs: version 4.0 with LZMA457 ported by BRCM
 +msgmni has been set to 55
 +io scheduler noop registered (default)
 +PPP generic driver version 2.4.2
 +PPP Deflate Compression module registered
 +PPP BSD Compression module registered
 +NET: Registered protocol family 24
 +bcm963xx_mtd driver v1.0
 +File system address: 0xb8010100
 +brcmboard: brcm_board_init entry
 +SES: Button Interrupt 0x1 is enabled
 +SES: LED GPIO 0x8018 is enabled
 +Serial: BCM63XX driver $Revision: 3.00 $
 +ttyS0 at MMIO 0xb0000100 (irq = 10) is a BCM63XX
 +ttyS1 at MMIO 0xb0000120 (irq = 11) is a BCM63XX
 +bcmxtmrt: Broadcom BCM6368B2 ATM/PTM Network Device v0.3 Jan  4 2012 11:12:01
 +Broadcom Logger v0.1 Jan  4 2012 11:11:09
 +Mirror/redirect action on
 +u32 classifier
 +    input device check on
 +    Actions configured
 +TCP cubic registered
 +Initializing XFRM netlink socket
 +NET: Registered protocol family 17
 +NET: Registered protocol family 15
 +Initializing MCPD Module
 +Ebtables v2.0 registered
 +ebt_time registered
 +ebt_ftos registered
 +ebt_wmm_mark registered
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 +All bugs added by David S. Miller <davem@redhat.com>
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:0.
 +Freeing unused kernel memory: 116k freed
 +init started:  BusyBox v1.00 (2012.01.04-03:14+0000) multi-call binary
 +
 +
 +BusyBox v1.00 (2012.01.04-03:14+0000) Built-in shell (msh)
 +Enter 'help' for a list of built-in commands.
 +
 +
 +Loading drivers and kernel modules...
 +
 +pktflow: module license 'Proprietary' taints kernel.
 +Disabling lock debugging due to kernel taint
 +Broadcom Packet Flow Cache  Char Driver v2.1 Jul 15 2010 09:29:38 Registered<242>
 +NBUFF v1.0 Initialized
 +Broadcom Packet Flow Cache learning via BLOG enabled.
 +Created Proc FS /procfs/fcache
 +Broadcom Packet Flow Cache registered with netdev chain
 +Constructed Broadcom Packet Flow Cache v2.1 Jul 15 2010 09:29:37
 +Broadcom Packet CMF (Experimental) Char Driver v0.1 Jul 15 2010 09:29:34 Registered<232>
 +Broadcom Packet CMF (Experimental) [6368-B2] v0.1 Jul 15 2010 09:29:33 Loaded
 +bcmxtmcfg: bcmxtmcfg_init entry
 +adsl: adsl_init entry
 +Broadcom BCM6368B2 Ethernet Network Device v0.1 Jan  4 2012 11:11:15
 +ETH Init: 180 tx BDs at 0xa18d4000
 +ETH Init: 180 tx BDs at 0xa199c000
 +ETH Init: 400 rx BDs at 0xa19eb000
 +ETH Init: 400 rx BDs at 0xa19fb000
 +dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
 +Broadcom Packet CMF (Experimental) SWC RESET.
 +Broadcom Packet CMF (Experimental) SWC INITIALIZED.
 +Broadcom Packet CMF (Experimental) Forwarder Net Device 0 v0.1 Jul 15 2010 09:29:35 Registered
 +Broadcom Packet CMF (Experimental) Forwarder Net Device 0 v0.1 Jul 15 2010 09:29:35 Registered
 +Broadcom Packet CMF (Experimental) ENABLED.
 +eth0: MAC Address: C8:6C:87:5C:11:A9
 +eth1: MAC Address: C8:6C:87:5C:11:A9
 +eth2: MAC Address: C8:6C:87:5C:11:A9
 +eth3: MAC Address: C8:6C:87:5C:11:A9
 +eth4: MAC Address: C8:6C:87:5C:11:A9
 +PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
 +PCI: Setting latency timer of device 0000:00:01.0 to 64
 +wl:srom not detected,using main memory mapped srom info(wombo board)
 +wl:loading /etc/wlan/bcm43222_map.bin
 +wl0: Broadcom BCMa8d6 802.11 Wireless Controller 5.60.120.11.cpe4.06L02.1
 +dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
 +IRQ 21/brcm_21: IRQF_DISABLED is not guaranteed on shared IRQs
 +p8021ag: p8021ag_init entry
 +Broadcom 802.1Q VLAN Interface, v0.1
 +
 +===== Release Version 4.06L.02 (build timestamp 120104_1421) =====
 +
 +Sun Jan  1 00:00:00 UTC 2012
 +update Persistent size = 24029, offset = 0
 +update BackupPsi size = 24029, offset = 0
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +Netfilter messages via NETLINK v0.30.
 +nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
 +dhcpd:error:12.771:set_iface_config_defaults:621:SIOCGIFADDR failed on br0!
 +xt_time: kernel timezone is -0000
 +iptables: Bad rule (does a matching rule exist in that chain?)
 +Sntp: Using new rule EST5EDT,M3.2.0/2,M11.1.0/2
 +device eth0.0 entered promiscuous mode
 +device eth0 entered promiscuous mode
 +br0: port 1(eth0.0) entering forwarding state
 +device eth0 is not a slave of br0
 +Created new Tag Rule: dev=eth0, dir=1, tags=0, id=0
 +
 +Created new Tag Rule: dev=eth0, dir=1, tags=1, id=0
 +
 +Created new Tag Rule: dev=eth0, dir=1, tags=2, id=0
 +
 +Broadcom Packet Flow Cache flushing the flows
 +device eth1.0 entered promiscuous mode
 +device eth1 entered promiscuous mode
 +br0: port 2(eth1.0) entering forwarding state
 +device eth1 is not a slave of br0
 +Created new Tag Rule: dev=eth1, dir=1, tags=0, id=0
 +
 +Created new Tag Rule: dev=eth1, dir=1, tags=1, id=0
 +
 +Created new Tag Rule: dev=eth1, dir=1, tags=2, id=0
 +
 +Broadcom Packet Flow Cache flushing the flows
 +device eth2.0 entered promiscuous mode
 +device eth2 entered promiscuous mode
 +br0: port 3(eth2.0) entering forwarding state
 +device eth2 is not a slave of br0
 +Created new Tag Rule: dev=eth2, dir=1, tags=0, id=0
 +
 +Created new Tag Rule: dev=eth2, dir=1, tags=1, id=0
 +
 +Created new Tag Rule: dev=eth2, dir=1, tags=2, id=0
 +
 +Broadcom Packet Flow Cache flushing the flows
 +device eth3.0 entered promiscuous mode
 +device eth3 entered promiscuous mode
 +br0: port 4(eth3.0) entering forwarding state
 +device eth3 is not a slave of br0
 +Created new Tag Rule: dev=eth3, dir=1, tags=0, id=0
 +
 +Created new Tag Rule: dev=eth3, dir=1, tags=1, id=0
 +
 +Created new Tag Rule: dev=eth3, dir=1, tags=2, id=0
 +
 +Broadcom Packet Flow Cache flushing the flows
 +WLmngr Daemon is running
 +optarg=0 shmId=0
 +BcmAdsl_Initialize=0xC00F8E2C, g_pFnNotifyCallback=0xC0128AF4
 +wlevt_init@107: opened loopback socket 4
 +wlevt is ready for new msg...
 +Clocks for QPROC and AFE are being aligned with step through ...
 +AFE is aligned, i = 067, PhaseValue = -050, PhaseCntl = 0x3FBD0000
 +QPROC is aligned, i = 068, PhaseValue = -150, PhaseCntl = 0x3FBD7FBD
 +Clocks for QPROC and AFE are aligned with syn_status AFE = 0x70, QPROC = 0x78
 +AFE  phase control reg @0xb0f570f8 default actual = 0x0021C38F, exp = 0x0021c38f
 +QPRC phase control reg @0xb0f5f0c0 default actual = 0x0421C38F, exp = 0x0421c38f
 +pSdramPHY=0xA1FFFFF8, 0x11541401 0x572DBFEF
 +*** XfaceOffset: 0x5FF90 => 0x5FF90 ***
 +*** PhySdramSize got adjusted: 0xBDAC0 => 0xEB1E0 ***
 +AdslCoreSharedMemInit: shareMemAvailable=85504
 +AdslCoreHwReset: pLocSbSta=80428000 bkupThreshold=3072
 +AdslCoreHwReset:  AdslOemDataAddr = 0xA1FB3438
 +dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
 +XTM Init: 400 rx BDs at 0xa09bd000
 +XTM Init: 100 rx BDs at 0xa0917800
 +
 + PROGRAM : VcAutoHunt main > ENTER
 +/var/cert/acscert2.cacert: cannot open
 +ln: /var/cert/bdbefb5f.0: File exists
 +Broadcom Packet CMF (Experimental) ENABLED.
 +Broadcom Packet Flow Cache learning via BLOG enabled.
 +Broadcom Packet Flow Cache flushing the flows
 +monitor task is initialized pid= 191
 +General UPnP daemon is ready to run with NATT 1
 +Switch MDK: num_switches = 1
 +Switch MDK: unit = 0; phy_pbmp = 0x1f; config_pbmp = 0x1f
 +Switch MDK link poll thread: unit=0; phypbmp=0x1f
 +eth4 Link UP -1 mbps half duplex
 +update Persistent size = 24029, offset = 0
 +update BackupPsi size = 24029, offset = 0
 +update Persistent size = 23956, offset = 0
 +update BackupPsi size = 23956, offset = 0
 +There is no Predefined DevicePin in CFE
 +WPS Device PIN = 17258227
 +Setting SSID: "FrontierHSI"
 +Setting SSID: "wl0_Guest1"
 +Setting SSID: "wl0_Guest2"
 +Setting SSID: "wl0_Guest3"
 +
 +
 +
 +
 +version
 +Frontier P-870HN-51b
 +Login: admin
 +Password:
 +update Persistent size = 24303, offset = 0
 +update BackupPsi size = 24303, offset = 0
 + > cat /proc/cpuinfo
 +system type             : 96368MVWG
 +processor               : 0
 +cpu model               : Broadcom4350 V3.1
 +BogoMIPS                : 399.36
 +wait instruction        : yes
 +microsecond timers      : yes
 +tlb_entries             : 32
 +extra interrupt vector  : no
 +hardware watchpoint     : no
 +ASEs implemented        :
 +shadow register sets    : 1
 +core                    : 0
 +VCED exceptions         : not available
 +VCEI exceptions         : not available
 +
 +unaligned exceptions            : 21
 + >
 +
 +
 +
 +
 + > cat /proc/version
 +Linux version 2.6.30 (FuChia@MsgSW4-SerVer) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #2 Wed Jan 4 11:38:27 CST 2012
 + > free
 +consoled:error:333.883:processInput:507:unrecognized command free
 + > Line 0: xDSL G.994 training
 +cat /proc/meminfo Line 0: ADSL link down
 +bcmxtmcfg: XTM Link Information, portid = 0, State = DOWN, Service Support = PTM
 +Broadcom Packet CMF (Experimental) SWC FLUSHED.
 +bcmxtmcfg: Reinitialize port 0 traffictype 2
 +bcmxtmcfg: Normal(XTM/PTM) Mode enabled
 +
 +MemTotal:          28632 kB
 +MemFree:            1868 kB
 +Buffers:            2696 kB
 +Cached:             8772 kB
 +SwapCached:            0 kB
 +Active:             3804 kB
 +Inactive:           9948 kB
 +Active(anon):        904 kB
 +Inactive(anon):     1380 kB
 +Active(file):       2900 kB
 +Inactive(file):     8568 kB
 +SwapTotal:             0 kB
 +SwapFree:              0 kB
 +Dirty:                 0 kB
 +Writeback:             0 kB
 +AnonPages:          2304 kB
 +Mapped:             2916 kB
 +Slab:               9260 kB
 +SReclaimable:        420 kB
 +SUnreclaim:         8840 kB
 +PageTables:          280 kB
 +NFS_Unstable:          0 kB
 +Bounce:                0 kB
 +WritebackTmp:          0 kB
 +CommitLimit:       14316 kB
 +Committed_AS:       6308 kB
 +VmallocTotal:    1032148 kB
 +VmallocUsed:        3420 kB
 +VmallocChunk:    1022260 kB
 + > cat /proc/mtd
 +dev:    size   erasesize  name
 +mtd0: 0049a000 0049a000 "Physically mapped flash"
 + > cat /proc/interrupts
 +           CPU0
 +  7:     364626         BCM63xx  timer
 + 10:        324         BCM63xx  brcm_10
 + 12:       2789         BCM63xx  brcm_12
 + 21:          0         BCM63xx  brcm_21
 + 22:          0         BCM63xx  brcm_22
 + 23:          0         BCM63xx  brcm_23
 + 28:          0         BCM63xx  brcm_28
 + 29:          0         BCM63xx  brcm_29
 + 40:          0         BCM63xx  brcm_40
 + 41:          0         BCM63xx  brcm_41
 + 42:          0         BCM63xx  brcm_42
 + 48:          0         BCM63xx  brcm_48
 + 49:          0         BCM63xx  brcm_49
 + 50:          0         BCM63xx  brcm_50
 +
 +ERR:          0
 + > dmesg
 +consoled:error:370.114:processInput:507:unrecognized command dmesg
 + >
 +
 +
 +
 + > help
 +?
 +help
 +logout
 +exit
 +quit
 +reboot
 +df
 +meminfo
 +kill
 +echo
 +ifconfig
 +ping
 +ps
 +pwd
 +sysinfo
 +tftp
 +wlctl
 +arp
 +lan
 +lanhosts
 +restoredefault
 +save
 +swversion
 +wlan
 +tr064
 +cfm
 +vcautohunt
 +dhcpcondserv
 +captiveurl
 + > meminfo
 +Total MDM Shared Memory Region : 1024KB
 +Shared Memory Usable           : 000929KB
 +Shared Memory in-use           : 000117KB
 +Shared Memory free             : 000812KB
 +Shared Memory allocs           : 023067
 +Shared Memory frees            : 021132
 +Shared Memory alloc/free delta : 001935
 +
 +Heap bytes in-use     : 000016
 +Heap allocs           : 000914
 +Heap frees            : 000913
 +Heap alloc/free delta : 000001
 + > ifconfig
 +bcmsw           Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +                Base address:0x6a00
 +
 +br0             Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                inet addr:192.168.254.254  Bcast:192.168.254.255  Mask:255.255.255.0
 +                UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9646 (9.4 KiB)
 +
 +eth0            Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +eth0.0          Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9706 (9.4 KiB)
 +
 +eth1            Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +
 +eth1.0          Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9586 (9.3 KiB)
 +
 +eth2            Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +
 +eth2.0          Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9466 (9.2 KiB)
 +
 +eth3            Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:1000
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +
 +eth3.0          Link encap:Ethernet  HWaddr C8:6C:87:5C:11:A9
 +                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:9346 (9.1 KiB)
 +
 +lo              Link encap:Local Loopback
 +                inet addr:127.0.0.1  Mask:255.0.0.0
 +                UP LOOPBACK RUNNING  MTU:16436  Metric:1
 +                RX packets:90 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:6606 (6.4 KiB)  TX bytes:6606 (6.4 KiB)
 +
 +sar             Link encap:UNSPEC  HWaddr FE-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-00
 +                UP NOTRAILERS RUNNING NOARP  MTU:0  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +                Interrupt:50 Base address:0x5220
 +
 +swc             Link encap:UNSPEC  HWaddr FE-FF-FF-FF-FF-FF-FF-FF-00-00-00-00-00-00-00-00
 +                UP NOTRAILERS RUNNING NOARP  MTU:0  Metric:1
 +                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +                collisions:0 txqueuelen:0
 +                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +                Interrupt:42 Base address:0x6a40
 +
 + > sysconfig
 +consoled:error:175.526:processInput:507:unrecognized command sysconfig
 + > sysinfo
 +Number of processes: 42
 + 12:03am  up 3 min,
 +load average: 1 min:0.03, 5 min:0.07, 15 min:0.03
 +              total         used         free       shared      buffers
 +  Mem:        28632        26536         2096            0         2696
 + Swap:            0            0            0
 +Total:        28632        26536         2096
 + > swversion
 +Usage: swversion show
 +       swversion help
 + > swversion show
 +1.10(VFS.0)b3
 + ></nowiki>
 +</WRAP>\\
 +
 +
 +==== OpenWrt bootlog ====
 +
 +<WRAP bootlog>
 +<nowiki>
 + > tftp
 +BusyBox v1.00 (2012.01.04-03:14+0000) multi-call binary
 +
 +Usage: tftp [-p|-g] [-t i|c] [-f filename] tftp_server_ip
 +
 +Update firmware image and configuration data from OR backup configuration
 +data to a tftp server.
 +
 +Examples:
 +-g -t i -f filename server_ip   Get (flash) broadcom or whole image to modem
 +-g -t c -f filename server_ip   Get (flash) config file to modem
 +-p -f filename server_ip        Put (backup) config file to [[docs:guide-user:troubleshooting:tftpserver|tftpd server]]
 +
 +
 + > tftp -g -t i -f openwrt-96368MVWG-generic-squashfs-cfe.bin 192.168.254.33
 +exit mcpd!!
 +MemTotal:          28632 kB
 +MemFree:           11364 kB
 +Buffers:             152 kB
 +Cached:             2908 kB
 +SwapCached:            0 kB
 +Active:             2336 kB
 +Inactive:           2216 kB
 +Active(anon):        628 kB
 +Inactive(anon):      864 kB
 +Active(file):       1708 kB
 +Inactive(file):     1352 kB
 +SwapTotal:             0 kB
 +SwapFree:              0 kB
 +Dirty:                 0 kB
 +Writeback:             0 kB
 +AnonPages:          1512 kB
 +Mapped:             2636 kB
 +Slab:               9088 kB
 +SReclaimable:        264 kB
 +SUnreclaim:         8824 kB
 +PageTables:          184 kB
 +NFS_Unstable:          0 kB
 +Bounce:                0 kB
 +WritebackTmp:          0 kB
 +CommitLimit:       14316 kB
 +Committed_AS:       3960 kB
 +VmallocTotal:    1032148 kB
 +VmallocUsed:        3420 kB
 +VmallocChunk:    1022260 kB
 +Allocating 8388628 bytes for flash image.
 +Memory allocated
 +Got image via tftp, total image size: 3276804
 +tftp:error:556.544:verifyZyXELModelId:143:Not find ZyXEL identify, just fall through
 +Flashing root file system and kernel...
 +....................................................
 +
 +****** DDR->DSLCorePhaseCntl=0 ******
 +
 +ý
 +
 +CFE version 1.0.37-107.23 for BCM96368 (32bit,SP,BE)
 +Build Date: 12/27/2011 (FuChia@MsgSW4-SerVer)
 +Copyright (C) 2000-2009 Broadcom Corporation.
 +
 +Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
 +Total Flash size: 8192K with 135 sectors
 +Chip ID: BCM6368B2, MIPS: 400MHz
 +Main Thread: TP0
 +Total Memory: 33554432 bytes (32MB)
 +Boot Address: 0xb8000000
 +
 +Checking Reset button on EXT INTR 0
 +Checking Reset button on EXT INTR 0
 +Board IP address                  : 192.168.1.1:ffffff00
 +Host IP address                   : 192.168.1.100
 +Gateway IP address                :
 +Run from flash/host (f/h)         : f
 +Default host run file name        : vmlinux
 +Default host flash file name      : bcm963xx_fs_kernel
 +Boot delay (0-9 seconds)          : 3
 +Board Id (0-15)                   : 96368MVWG
 +Number of MAC Addresses (1-32)    : 10
 +Base MAC Address                  : c8:6c:87:5c:11:a9
 +PSI Size (1-128) KBytes           : 64
 +Enable Backup PSI [0|1]           : 1
 +System Log Size (0-256) KBytes    : 0
 +Main Thread Number [0|1]          : 0
 +
 +*** Press any key to stop auto run (3 seconds) ***
 +Auto run second count down: 0
 +Wait for Multiboot Service Packet...  0
 +Booting from only image (0xb8010000) ...
 +Code Address: 0x80010000, Entry Address: 0x80010000
 +LZMA: Prossible old LZMA format, trying to decompress..
 +Decompression OK!
 +Entry at 0x80010000
 +Closing network.
 +Disabling Switch ports.
 +Flushing Receive Buffers...
 +1 buffers found.
 +Closing DMA Channels.
 +Starting program at 0x80010000
 +[    0.000000] Linux version 3.10.21 (thepeople@trabant) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38990) ) #1 Tue Dec 3 08:27:54 CET 2013
 +[    0.000000] Detected Broadcom 0x6368 CPU revision b2
 +[    0.000000] CPU frequency is 400 MHz
 +[    0.000000] 32MB of RAM installed
 +[    0.000000] registering 38 GPIOs
 +[    0.000000] board_bcm963xx: Boot address 0xb8000000
 +[    0.000000] board_bcm963xx: CFE version: 1.0.37-107.23
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
 +[    0.000000] board_bcm963xx: board name: 96368MVWG
 +[    0.000000] Determined physical RAM map:
 +[    0.000000]  memory: 02000000 @ 00000000 (usable)
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Zone ranges:
 +[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
 +[    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
 +[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
 +[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
 +[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +[    0.000000] Memory: 28752k/32768k available (2440k kernel code, 4016k reserved, 704k data, 244k init, 0k highmem)
 +[    0.000000] NR_IRQS:128
 +[    0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
 +[    0.032000] pid_max: default: 32768 minimum: 301
 +[    0.036000] Mount-cache hash table entries: 512
 +[    0.044000] NET: Registered protocol family 16
 +[    0.052000] registering PCI controller with io_map_base unset
 +[    0.056000] registering PCI controller with io_map_base unset
 +[    0.064000] bio: create slab <bio-0> at 0
 +[    0.068000] PCI host bridge to bus 0000:00
 +[    0.072000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
 +[    0.076000] pci_bus 0000:00: root bus resource [io  0x8000000-0x8007fff]
 +[    0.080000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
 +[    0.096000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
 +[    0.100000] PCI host bridge to bus 0000:01
 +[    0.104000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
 +[    0.108000] pci_bus 0000:01: root bus resource [io  0x8008000-0x800ffff]
 +[    0.112000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
 +[    0.116000] pci 0000:01:1e.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +[    0.120000] pci 0000:01:1e.0: BAR 10: assigned [mem 0x38000000-0x3fffffff]
 +[    0.124000] pci 0000:01:1e.0: BAR 7: assigned [io  0x8008000-0x80080ff]
 +[    0.128000] pci 0000:01:1e.0: BAR 8: assigned [io  0x8008400-0x80084ff]
 +[    0.132000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
 +[    0.136000] pci 0000:01:1e.0:   bridge window [io  0x8008000-0x80080ff]
 +[    0.140000] pci 0000:01:1e.0:   bridge window [io  0x8008400-0x80084ff]
 +[    0.144000] pci 0000:01:1e.0:   bridge window [mem 0x38000000-0x3fffffff]
 +[    0.148000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)
 +[    0.152000] Switching to clocksource MIPS
 +[    0.160000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
 +[    0.188000] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
 +[    0.252000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
 +[    0.260000] NET: Registered protocol family 2
 +[    0.264000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
 +[    0.272000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
 +[    0.280000] TCP: Hash tables configured (established 512 bind 512)
 +[    0.284000] TCP: reno registered
 +[    0.288000] UDP hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.296000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 +[    0.304000] NET: Registered protocol family 1
 +[    0.308000] audit: initializing netlink socket (disabled)
 +[    0.316000] type=2000 audit(0.316:1): initialized
 +[    0.320000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    0.324000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    0.336000] msgmni has been set to 56
 +[    0.340000] io scheduler noop registered
 +[    0.344000] io scheduler deadline registered (default)
 +Ę[    0.360000] console [ttyS0] enabled, bootconsole disabled= 10) is a bcm63xx_uart
 +[    0.360000] console [ttyS0] enabled, bootconsole disabled
 +[    0.372000] bcm63xx-rng bcm63xx-rng: registered RNG driver
 +[    0.380000] physmap platform flash device: 08000000 at 18000000
 +[    0.384000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
 +[    0.396000] Amd/Fujitsu Extended Query Table at 0x0040
 +[    0.400000]   Amd/Fujitsu Extended Query version 1.1.
 +[    0.408000] number of CFI chips: 1
 +[    0.412000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368MVWG
 +[    0.420000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
 +[    0.424000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
 +[    0.432000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length 6c0000
 +[    0.440000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
 +[    0.448000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
 +[    0.456000] bcm63xxpart: Spare partition is offset 330004 and length 4bfffc
 +[    0.460000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
 +[    0.468000] Creating 5 MTD partitions on "physmap-flash.0":
 +[    0.476000] 0x000000000000-0x000000010000 : "CFE"
 +[    0.480000] 0x000000010100-0x000000130000 : "kernel"
 +[    0.488000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
 +[    0.500000] 0x000000130000-0x0000007f0000 : "rootfs"
 +[    0.508000] mtd: device 2 (rootfs) set to be root filesystem
 +[    0.512000] mtd: partition "rootfs_data" created automatically, ofs=0x330000, len=0x4c0000
 +[    0.520000] 0x000000330000-0x0000007f0000 : "rootfs_data"
 +[    0.528000] 0x0000007f0000-0x000000800000 : "nvram"
 +[    0.536000] 0x000000010000-0x0000007f0000 : "linux"
 +[    0.544000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
 +[    0.592000] b53_common: found switch: BCM63xx, rev 0
 +[    0.596000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
 +[    0.608000] TCP: cubic registered
 +[    0.608000] NET: Registered protocol family 17
 +[    0.616000] Bridge firewalling registered
 +[    0.620000] 8021q: 802.1Q VLAN Support v1.8
 +[    0.632000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
 +[    0.640000] Freeing unused kernel memory: 244K (80323000 - 80360000)
 +procd: Console is alive
 +procd: - watchdog -
 +procd: - preinit -
 +ifconfig: SIOCGIFFLAGS: No such device
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +[    4.428000] Button Hotplug driver version 0.4.1
 +mount_root: jffs2 is not ready - EOF marker found
 +ifconfig: SIOCGIFFLAGS: No such device
 +procd: - early -
 +procd: - watchdog -
 +procd: - ubus -
 +procd: - init -
 +Please press Enter to activate this console.
 +[    8.292000] NET: Registered protocol family 10
 +[    8.316000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
 +[    8.332000] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +[    8.356000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093
 +[    8.364000] Backport generated by backports.git backports-20130802-0-gdb67a3f
 +[    8.376000] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[    8.436000] xt_time: kernel timezone is -0000
 +[    8.468000] cfg80211: Calling CRDA to update world regulatory domain
 +[    8.488000] cfg80211: World regulatory domain updated:
 +[    8.492000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
 +[    8.500000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
 +[    8.508000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
 +[    8.516000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
 +[    8.524000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
 +[    8.532000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
 +[    8.540000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
 +[    8.652000] PPP generic driver version 2.4.2
 +[    8.660000] NET: Registered protocol family 24
 +[    8.704000] b43-phy0: Broadcom 43222 WLAN found (core revision 16)
 +[    8.756000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
 +[    8.788000] Broadcom 43xx driver loaded [ Features: PNL ]
 +[   16.752000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
 +[   16.772000] jffs2_build_filesystem(): unlocking the mtd device... done.
 +[   16.776000] jffs2_build_filesystem(): erasing all blocks after the end marker... [   17.472000] device eth0.1 entered promiscuous mode
 +[   17.476000] device eth0 entered promiscuous mode
 +[   17.488000] br-lan: port 1(eth0.1) entered forwarding state
 +[   17.492000] br-lan: port 1(eth0.1) entered forwarding state
 +[   18.460000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
 +[   19.496000] br-lan: port 1(eth0.1) entered forwarding state
 +done.
 +[   58.092000] jffs2: notice: (547) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
 +procd: - init complete -
 +
 +
 +
 +BusyBox v1.19.4 (2013-12-03 08:14:57 CET) built-in shell (ash)
 +Enter 'help' for a list of built-in commands.
 +
 +  _______                     ________        __
 +       |.-----.-----.-----.|  |  |  |.----.|  |_
 +     ||  _  |  -__|     ||  |  |  ||   _||   _|
 + |_______||   __|_____|__|__||________||__|  |____|
 +          |__| W I R E L E S S   F R E E D O M
 + -----------------------------ujjjjjjjj
 +                                        BARRIER BREAKER (Bleeding Edge, r38990)
 + -----------------------------------------------------
 +  * 1/2 oz Galliano         Pour all ingredients into
 +  * 4 oz cold Coffee        an irish coffee mug filled
 +  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
 +  * 2 tsp. Creme de Cacao
 + -----------------------------------------------------
 +root@OpenWrt:/#
 +</nowiki>
 +</WRAP>\\
 +
 +OpenWrt debug level 4 pastebin: [[http://pastebin.com/KCBeMZif]]
 +
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>bcm63xx bcm6368 FastEthernet 4Port 2nic 2Ant DetachableAntenna InternalAntenna 32RAM 64RAM 8Flash xDSL ADSL2+ VDSL VDSL2 MIPS MIPS32 802.11bgn trng WIP}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1