Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:zte:zxa10f660 [2015/08/03 13:20] – Proper section heading added tmomastoh:zte:zxa10f660 [2023/06/19 13:37] – [Table] catzy007
Line 1: Line 1:
 +====== ZTE ZXA10 F660 ======
  
 +===== OpenWrt support =====
 +
 +<color red>**Not supported.**</color>
 +
 +Some work in here: https://forum.openwrt.org/t/openwrt-now-support-zte-f660-v3-0-and-hgg420n/101136
 +===== Hardware =====
 +==== Info ====
 +^ Revision                                                      | V3.0                                                        |
 +^ [[wp>Instruction set]]                                        | [[wp>ARM9|ARM9]]                                            |
 +^ Vendor                                                        | [[wp>Marvell Technology Group|Marvell]]                     |
 +^ [[docs:techref:bootloader]]                                   | [[docs:techref:bootloader:uboot|U-Boot]]                    |
 +^ [[docs:techref:hardware:soc|System-On-Chip]]                  | MV88F6560                                                   |
 +^ [[docs:techref:hardware:cpu|CPU]] @Frq                        | (?)MHz                                                      |
 +^ Flash size                                                    | 128 MiB / 32 MiB                                            |
 +^ Flash Chip                                                    | SPANSION S34ML01G100TF100                                   |
 +^ RAM size                                                      | 128 MB                                                      |
 +^ RAM Chip                                                      | SK Hynix H5TQ1G63DFR-H9C                                    |
 +^ Wireless No1                                                  | Realtek RTL8192CE 2.4GHz 802.11b/g/                       |
 +^ [[docs:techref:hardware:Switch]]                              | (?)                                                         |
 +^ [[docs:techref:hardware:internet.access.technologies|Modem]]  | (?) TW2362G-CDEH GPON ONU 2x10                              |
 +^ USB                                                           | Yes 1 x 2.0, connector not present on some board revisions  |
 +^ [[docs:techref:hardware:port.serial|Serial]]                  | Yes                                                         |
 +^ [[docs:techref:hardware:port.jtag|JTAG]]                      | (?)                                                         |
 +
 +==== Photos ====
 +{{https://catzy007.github.io/things/f660v3/top.jpg?400|ZXA10 F660 V3 Top}}
 +{{https://catzy007.github.io/things/f660v3/bottom.jpg?400|ZXA10 F660 V3 Bottom}}
 +
 +==== Opening the case ====
 +**Note:** This will void your warranty!
 +
 +  * To remove the cover and open the device, remove rubber feet and screws. Opening the plastic case will be painful, try not to break the tiny plastic pieces.
 +
 +//Main PCB://\\
 +{{https://catzy007.github.io/things/f660v3/board-top.jpg?400|ZXA10 F660 V3 Board Top}}
 +{{https://catzy007.github.io/things/f660v3/board-bottom.jpg?400|ZXA10 F660 V3 Board Bottom}}
 +
 +==== Serial ====
 +Serial is located near the power button.
 +
 +Settings: 115200, 3v3 TTL
 +
 +{{https://catzy007.github.io/things/f660v3/serial.jpg?400|ZXA10 F660 V3 Board Bottom}}
 +
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<code>
 +BootROM 1.34
 +Booting from NAND flash
 +BootROM: Image checksum verification PASSED
 +
 +
 +U-Boot 2009.08 (May 27 2015 - 09:16:04)
 +
 +Hit enter to stop autoboot: 
 +
 +Starting kernel ...
 +
 +[ethSetPortConf]iPortNum = 0...................
 +                                               [ethSetPortConf]iPortNum = 3...................
 +                                                                                              [ethSetPortConf]iPortNum = 2...................
 +                                                                                                                                             [ethSetPortConf]iPortNum = 1...................
 +                                                                                                                                                                                            ==========================sys process start=========================
 +Omci get Byte Order is Little-Endian
 +g_bByteSort(0)
 +=====================omci sender process start=====================
 +=====================omci execute process start=====================
 +======================omci debug process start======================
 +VOP_TaskEntry entered:POWER ON!!!wState:0
 +                                         VOP_DSP2RtraceTaskEntry entered:POWER ON!!!wState:0
 +                                                                                            VOP_DspTraceTaskEntery entered:POWER ON!!!wState:0
 +                                                                                                                                              ~~~SLC_Initial Slic_type: 1  ZXA10_F620G_ODM
 +=====11930:23:17 [================upnp_igd][Warn] ====omci process[upnpigd.c(199)U start==========PnPIGDStart] Cal===============
 + g_MeCtr_Configd!UPnPIGDProcessure=0x00000000,gRestart ret = -1_MeCtr_CreateMar06                                                l function faile
 +k1=0x00000000,g_MeCtr_CreateMark2=0x00000000
 +Call CmDevGetDevInfoConf success! the HardwareVer is V3.0
 +OmciAdapter get_onu_g_version V3.0
 +OmciAdapter_get_serial_number result:0 sn:ZTEG0xc041e620
 +OmciAdapter get_loid ZTEGC041E620
 +OmciAdapter get_loid_pwd GC041E620
 +Process_Perf's Event(4352) is not support !! 
 +11930:23:17 [KIGMP][Error] [br_mld.c(1625)mld_deal_data] packet from br0, drop it!
 +Using /kmodule/slc/usrline.ko
 +                             SLC:User Siliconlab Driver V3.0.0 Init Finish.
 +Initial Config NOPTC F460MV/F420MV: 37.
 +Find a chan 0, cs 0
 +Find a chan 0, cs 1
 +cann't Find a chan  2
 +cann't Find a chan  3
 +cann't Find a chan  4
 +cann't Find a chan  5
 +cann't Find a chan  6
 +cann't Find a chan  7
 +Init port  0
 +mii0: link up
 +mii2: link up
 +Port 3: Link-up, Full-duplex, Speed-100Mbps.
 +cpcp port 3 state change!
 +11930:23:19 [KIGMP][Error] [br_mld.c(1625)mld_deal_data] packet from br0, drop it!
 +Siliconlab chip Si32176 found! 0 
 +Init port  1
 +Siliconlab chip Si32176 found! 1 
 +11930:23:25 [OSS_httpd][Error] [oss_comm.c(2300)SocketSynSendMs] SocketSynSendMsg s32ActCount = 0  errno  = 0 !!! 
 +11930:23:25 [OSS_telnetd][Error] [oss_comm.c(2300)SocketSynSendMs] SocketSynSendMsg s32ActCount = 0  errno  = 0 !!! 
 +11930:23:25 [OSS_gpon_omci][Error] [oss_comm.c(2300)SocketSynSendMs] SocketSynSendMsg s32ActCount = 0  errno  = 0 !!! 
 +11930:23:25 [OSS_gpon_omci][Error] [oss_comm.c(2303)SocketSynSendMs] APPID[0x84] send EVENT[0x2402] to APPID[0x1] dwUsedTicks[852] timeout !!!
 +11930:23:25 [OSS_gpon_omci][Error] [oss_common.c(664)SSEND] [omci][00840101] SSEND Send Message[0X2402] to [00010182] socket failed  
 +11930:23:25 [omci][Error] [pon_eth_cmapi.c(4561)CmEthGetPortLin] CmSendMsg2MM return error iRet=-3!
 +11930:23:25 [omci][Error] [pon_eth_cmapi.c(352)CmUniGetPortCon] CmEthGetPortLinkState error!
 +(Slot:0, Port:0)Call CmUniGetPortConfig error, i11930:23:25 [Ret = -3
 +OSS_httpd][Error] [oss_comm.c(2303)SocketSynSendMs] APPID[0x3] send EVENT[0x9701] to APPID[0x1] dwUsedTicks[854] timeout !!!
 +11930:23:25 [OSS_httpd][Error] [oss_common.c(664)SSEND] [webd][00030101] SSEND Send Message[0X9701] to [00010102] socket failed  
 +11930:23:25 [webd][Error] [fw_api.c(274)fwPortRegisterA] fwPortRegisterApi chItemID:WEB wEvent:9701 iRet:7ffe0005 FAILURE!
 +11930:23:25 [OSS_httpd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[webd] Event[0x1100] dwUsedTicks[868]
 +11930:23:25 [tr069][Warn] [notify_value_ch(273)NotifyListFind] parameter is NULL!
 +addr 44, data 0x0
 +addr 44, data 0x0
 +addr 44, data 0x0
 +addr 44, data 0x0
 +11930:23:26 [OSS_voip][Warn] [oss_sche.c(701)RunProcess] RunProcess process[SLCCONTROL] Event[0x6511] dwUsedTicks[874]
 +11930:23:26 [OSS_telnetd][Error] [oss_comm.c(2303)SocketSynSendMs] APPID[0x3d] send EVENT[0x9702] to APPID[0x1] dwUsedTicks[847] timeout !!!
 +11930:23:26 [OSS_telnetd][Error] [oss_common.c(664)SSEND] [telnetd][003D0101] SSEND Send Message[0X9702] to [00010102] socket failed  
 +11930:23:26 [telnetd][Error] [fw_api.c(274)fwPortRegisterA] fwPortRegisterApi chItemID:TELNET wEvent:9702 iRet:7ffe0005 FAILURE!
 +11930:23:26 [OSS_cspd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[firewall] Event[0x9701] dwUsedTicks[895]
 +11930:23:26 [OSS_upnpd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[upnp_cp] Event[0x1103] dwUsedTicks[899]
 +11930:23:26 [OSS_telnetd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[telnetd] Event[0x1103] dwUsedTicks[910]
 +11930:23:26 [OSS_gpon_omci][Warn] [oss_comm.c(2119)SynMsgCheck] Ack wEvent = 0x2402 Msg wEvent = 0x2402  wAckLen = 104 wAckBuffLen = 8192 wAckCheck = 1 wSynCheck = 4
 +Sub_SNOntStaticDB:Don't create meclass:350!
 +Omci Debug:CmWLANListConfig.dwCount = 4 
 +[ethSetPortConf]iPortNum = 0...................
 +                                               [ethSetPortConf]iPortNum = 3...................
 +                                                                                              [ethSetPortConf]iPortNum = 2...................
 +                                                                                                                                             [ethSetPortConf]iPortNum = 1...................
 +                                                                                                                                                                                            wlan_get_ssid_control: cur user=0 
 +                   [XCK]eWEPAuthMode 0, eBeaconType 2, eWPAAuthMode 0, e11iAuthMode 0 
 +wlan_get_ssid_control: cur user=0 
 +                                  [XCK]eWEPAuthMode 0, eBeaconType 2, eWPAAuthMode 0, e11iAuthMode 0 
 +wlan_get_ssid_control: cur user=0 
 +                                  [XCK]eWEPAuthMode 0, eBeaconType 2, eWPAAuthMode 0, e11iAuthMode 0 
 +wlan_get_ssid_control: cur user=0 
 +                                  [XCK]eWEPAuthMode 0, eBeaconType 2, eWPAAuthMode 0, e11iAuthMode 0 
 +11930:23:27 [omci][Error] [pon_version_mgr(427)GetVersionNumbe] <GetVersionNumberString>(427)bVersionNumber:V2.30.20P5T4S
 +11930:23:27 [omci][Error] [pon_version_mgr(427)GetVersionNumbe] <GetVersionNumberString>(427)bVersionNumber:V2.30.20P8T8S
 +11930:23:27 [OSS_gpon_omci][Error] [oss_common.c(330)OSSSendAckData] [omci]OSSSendAckData[3E81] wAckLen = 4  wAckBuffLen = 0 [sender = 00840301]!!! 
 +power status is 0x9e!!!
 +step into Initialize_ALL_Dot1ag_MEs
 +step into Clear_All_Dot1ag_MEP
 +step into Clear_All_Dot1ag_MA
 +step into Clear_All_Dot1ag_MD
 +[ADAPTER]Set Gpon Up!!!
 +[mvGponStart]sn :ZTEGc041e620, pwd:GC041E620
 +ERROR: (mv_pon/core/gpon/gonuGponApi.c:822) onuGponApiGemPortIdClearONUMACDRV_GetTco[ADAPTER]Set GpontBufferSize: van Up!!!
 +lue(0) is out of[mvGponStart] range, use def sn :ZTEGc041e620value:256 
 +, pwd:GC041E620
 +[ADAPTER]Set Gpon Up!!!
 +[mvGponStart]sn :ZTEGc041e620, pwd:GC041E620
 +
 + ZTE----pon li11930:23:31 [nk activate succOSS_gpon_omci][Wess!
 +arn] [oss_sche.c(701)RunProcess] RunProcess process[omci] Event[0x3e81] dwUsedTicks[1420]
 +==========================alarm process start=======================
 +======================perf process start=====================
 +Process_Perf's Event(4355) is not support !! 
 +[Leaf_omciexception]exception msg is NULL!
 +Omci Debug:tIGMPList.dwCount = 8 
 +11930:23:31 [RCA][Warn] [rcm_main.c(105)RCM_Main] {RCM_Main} RCA_Watchdog wRegistdogRtn[0],[0:ok]
 +-----VOP_TaskEntopen DSP_dev ry entered:DSP Sdriver!
 +TART WORK!!!----UDP MOD START---wState:1
 +
 +open DSP_TRACE driver!
 +addr 44, data 0x0
 +addr 44, data 0x0
 +addr 44, data 0x0
 +addr 44, data 0x0
 +ssid set 0 
 +Configuration file: /var/secrtlx
 +                                Using interface wlan0 with hwaddr 54:22:f8:bf:e7:9b and ssid 'ZTE-bfe79b'
 +                                                                                                         Setting MTU failed - trying to s[PHY_ConfigMACWithParaFile][MACPHY_REG_92C]
 +[PHY_ConfigBBWithParaFile][PHY_REG_PG]
 +===> Load_92C_Firmware
 +<=== Load_92C_Firmware
 +urvive with current value
 +                         kTPTd_0 Thread create successfully!
 +br0: port 6(wlan0) entering learning state
 +br0: topology change detected, propagating
 +br0: port 6(wlan0) entering forwarding state
 +11930:23:33 [OSS_cspd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[wlan_config] Event[0x1154] dwUsedTicks[709]
 +</code>
 +</WRAP>
 +
 +===== Info =====
 +==== BusyBox version ====
 +<code>
 +BusyBox v1.01 (2012.11.27-11:12+0000) multi-call binary
 +
 +Usage: busybox [function] [arguments]...
 +   or: [function] [arguments]...
 +
 +        BusyBox is a multi-call binary that combines many common Unix
 +        utilities into a single executable.  Most people will create a
 +        link to busybox for each function they wish to use and BusyBox
 +        will act like whatever it was invoked as!
 +
 +Currently defined functions:
 +        [, arping, ash, brctl, busybox, cat, chmod, cp, cut, date, df,
 +        echo, egrep, env, fgrep, free, fuser, getty, grep, hexdump, hostname,
 +        ifconfig, init, insmod, kill, killall, klogd, linuxrc, ln, login,
 +        ls, lsmod, mkdir, mknod, modprobe, mount, mv, ping, ps, pwd, reboot,
 +        rm, rmdir, rmmod, route, sed, sh, sleep, test, tftp, top, traceroute,
 +        umount, wget
 +</code>
 +
 +==== CPU info ====
 +<code>
 +# cat /proc/cpuinfo
 +system type             : 
 +processor               : 0
 +cpu model               : Broadcom4350 V7.0
 +BogoMIPS                : 359.42
 +wait instruction        : yes
 +microsecond timers      : yes
 +tlb_entries             : 32
 +extra interrupt vector  : no
 +hardware watchpoint     : no
 +ASEs implemented        :
 +shadow register sets    : 1
 +core                    : 0
 +VCED exceptions         : not available
 +VCEI exceptions         : not available
 +
 +unaligned exceptions            : 5122342
 +
 +==== MTD mapping ====
 +# cat /proc/mtd
 +dev:    size   erasesize  name
 +mtd0: 00004000 00004000 "nvram"
 +mtd1: 00dfc000 00004000 "rootfs1"
 +mtd2: 00dfc000 00004000 "rootfs2"
 +mtd3: 00100000 00004000 "data"
 +mtd4: 00200000 00004000 "usercfg"
 +
 +==== Kernel supported devices ====
 +# # cat /proc/devices
 +Character devices:
 +  1 mem
 +  2 pty
 +  3 ttyp
 +  4 ttyS
 +  5 /dev/tty
 +  5 /dev/console
 +  5 /dev/ptmx
 + 10 misc
 + 83 ethdriver
 + 89 i2c
 + 97 ledkey_m
 +108 ppp
 +109 optical_dev
 +128 ptm
 +136 pts
 +180 usb
 +189 usb_device
 +206 brcmboard
 +209 endpoint
 +211 usrline
 +232 pktcmf
 +233 spu
 +235 bcm_user_ploam
 +236 bcm_omci
 +237 bcm_ploam
 +238 bcmvlan
 +242 fcache
 +254 usb_endpoint
 +
 +Block devices:
 +259 blkext
 +  8 sd
 + 31 mtdblock
 + 65 sd
 + 66 sd
 + 67 sd
 + 68 sd
 + 69 sd
 + 70 sd
 + 71 sd
 +128 sd
 +129 sd
 +130 sd
 +131 sd
 +132 sd
 +133 sd
 +134 sd
 +135 sd
 +</code>
 +
 +V3.0
 +<code>
 +# cat /proc/cpuinfo
 +Processor       : ARM926EJ-S rev 1 (v5l)
 +BogoMIPS        : 996.14
 +Features        : swp half thumb fastmult edsp 
 +CPU implementer : 0x56
 +CPU architecture: 5TE
 +CPU variant     : 0x2
 +CPU part        : 0x131
 +CPU revision    : 1
 +Cache type      : write-back
 +Cache clean     : cp15 c7 ops
 +Cache lockdown  : format C
 +Cache format    : Harvard
 +I size          : 16384
 +I assoc         : 4
 +I line length   : 32
 +I sets          : 128
 +D size          : 16384
 +D assoc         : 4
 +D line length   : 32
 +D sets          : 128
 +
 +Hardware        : Feroceon-KW2
 +Revision        : 0000
 +Serial          : 0000000000000000
 +
 +# cat /proc/mtd
 +dev:    offset   size   erasesize  name
 +mtd0: 00000000 08000000 00020000 "whole flash"
 +mtd1: 00000000 00200000 00020000 "u-boot"
 +mtd2: 03000000 00400000 00020000 "parameter tags"
 +mtd3: 00200000 01400000 00020000 "kernel0"
 +mtd4: 03c00000 00400000 00020000 "middleware"
 +mtd5: 03400000 00800000 00020000 "usercfg"
 +mtd6: 01600000 01400000 00020000 "kernel1"
 +mtd7: 02a00000 00600000 00020000 "others"
 +
 +# cat /proc/devices
 +Character devices:
 +  1 mem
 +  2 pty
 +  3 ttyp
 +  4 /dev/vc/0
 +  4 tty
 +  4 ttyS
 +  5 /dev/tty
 +  5 /dev/console
 +  5 /dev/ptmx
 +  7 vcs
 + 10 misc
 + 13 input
 + 83 ethdriver
 + 90 mtd
 + 97 ledkey_m
 +100 telephony
 +102 gpondrv_dev
 +104 switch_dev
 +105 switch_tst
 +108 ppp
 +109 optical_dev
 +123 watchdog
 +128 ptm
 +136 pts
 +180 usb
 +188 ttyUSB
 +189 usb_device
 +200 tdm_marvell
 +211 usrline
 +220 dsp_dev
 +232 pon
 +233 tpm
 +254 usb_endpoint
 +
 +Block devices:
 +  1 ramdisk
 +  8 sd
 + 31 mtdblock
 + 65 sd
 + 66 sd
 + 67 sd
 + 68 sd
 + 69 sd
 + 70 sd
 + 71 sd
 + 93 nftl
 +128 sd
 +129 sd
 +130 sd
 +131 sd
 +132 sd
 +133 sd
 +134 sd
 +135 sd
 +</code>
 +==== SerialPort params ====
 +<code>
 +# cat /proc/cmdline
 +root=mtd:rootfs2 ro rootfstype=jffs2 console=ttyS0,115200
 +</code>
 +
 +==== Linux kernel version ====
 +<code>
 +# cat /proc/version
 +Linux version 2.6.30 (wangkai@localhost.localdomain) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #329 Tue Nov 27 19:08:42 CST 2012
 +</code>
 +
 +==== System version ====
 +<code>
 +# cat /etc/version
 +Tue Nov 27 18:56:54 CST 2012
 +</code>
 +
 +==== Process list ====
 +<code>
 +# ls /proc
 +1             1090          346                       kpagecount
 +10            1091          347           985           kpageflags
 +1000          1092          348           988           led
 +1002          1093          349           991           loadavg
 +1005          1094          366           994           locks
 +1006          1095          4             995           meminfo
 +1007          1096          421           996           mii
 +1008          1097          422           997           misc
 +1009          11            431           999           modules
 +1010          1102          433           arpspf        mounts
 +1011          115           434           b3450_reg     mtd
 +1022          116           435           b3450reg      net
 +1025          117           436           bcmlog        nvram
 +1026          119           437           br_hook       omci
 +1027          12            438           brcm          pagetypeinfo
 +1028          1249          439           buddyinfo     partitions
 +1029          1257          440           bus           pktcmf
 +1030          1259          441           capability    ploam
 +1050          1261          442           catv_val      scsi
 +1051          1281          445           cmdline       self
 +1052          13            457           cpuinfo       slabinfo
 +1053          1322          459           crypto        stat
 +1054          1367          460           csp           switch
 +1055          148           461           devices       sys
 +1061          1525          463           diskstats     sysvipc
 +1063          1531          485           driver        timer_list
 +1064          16            5             execdomains   tty
 +1065          17            6             fcache        uptime
 +1067          186           699           filesystems   version
 +1068          187                       fs            vmallocinfo
 +1069          198           705           i2c_gpon      vmstat
 +1070          199           709           interrupts    watchdog
 +1071          2             710           iomem         wb
 +1072          3             711           ioports       zoneinfo
 +1084          334           712           irq           zteinfo
 +1085          335           713           kallsyms
 +1086          336           74            kcore
 +1087          344                       kfp
 +1088          345           83            kmsg
 +</code>
 +
 +==== Loaded modules list ====
 +<code>
 +# lsmod
 +Module                  Size  Used by
 +wl 2468384 0 - Live 0xc0fd2000 (P)
 +usb_led 1792 0 - Live 0xc0b60000
 +optical 30496 0 - Live 0xc0b50000
 +netdriver 45728 0 - Live 0xc0b31000
 +bcmvlan 62000 0 - Live 0xc0b09000 (P)
 +bcmgpon 453776 2 - Live 0xc0a7c000 (P)
 +gpon_i2c 15472 0 - Live 0xc09d7000
 +bcm3450 13648 0 - Live 0xc09c6000
 +i2c_bcm6xxx 9008 0 - Live 0xc09b6000
 +endpointdd 2081584 2 - Live 0xc07b1000 (P)
 +dspdd 1889440 1 endpointdd, Live 0x8108c740 (P)
 +bcm_enet 372672 1 netdriver, Live 0xc03b6000
 +bspdriver 39456 5 usb_led,optical,netdriver, Live 0xc0348000
 +pktcmf 1837328 1 bcm_enet, Live 0xc0172000 (P)
 +pktflow 59696 1 pktcmf, Live 0xc007a000 (P)
 +</code>
 +
 +V3.0
 +<code>
 +# lsmod
 +Module                  Size  Used by
 +usrline 138068 4 - Live 0xbf21e000
 +rtl8192cd 523398 0 - Live 0xbf19d000
 +option 8108 0 - Live 0xbf19a000
 +usbserial 26088 1 option, Live 0xbf192000
 +redirusb 18932 0 [permanent], Live 0xbf18c000
 +usb_led 1668 0 - Live 0xbf18a000
 +uhci_hcd 20460 0 - Live 0xbf184000
 +ehci_hcd 31020 0 - Live 0xbf17b000
 +usbcore 113692 6 option,usbserial,usb_led,uhci_hcd,ehci_hcd, Live 0xbf15e000
 +l3fastpath 42776 0 - Live 0xbf152000
 +dsp_dev 198176 4 - Live 0xbf120000
 +voip_codec 333532 1 dsp_dev, Live 0xbf0cd000
 +kudp 43296 2 dsp_dev,voip_codec, Live 0xbf0c1000
 +netdriver 37992 0 - Live 0xbf0b6000
 +optical 39300 0 - Live 0xbf0ab000
 +gpondrv 35748 1 netdriver, Live 0xbf0a1000
 +mv_gpon 350204 2 netdriver,gpondrv, Live 0xbf04a000
 +switch 215964 2 l3fastpath,netdriver, Live 0xbf014000
 +tagparam_mod 4708 0 - Live 0xbf011000
 +bspdriver 65092 6 usrline,optical,gpondrv,switch, Live 0xbf000000
 +</code>
 +==== Memory information ====
 +<code>
 +# cat /proc/meminfo
 +MemTotal:          58620 kB
 +MemFree:            3920 kB
 +Buffers:              20 kB
 +Cached:            21684 kB
 +SwapCached:            0 kB
 +Active:            10088 kB
 +Inactive:          20200 kB
 +Active(anon):       8584 kB
 +Inactive(anon):        0 kB
 +Active(file):       1504 kB
 +Inactive(file):    20200 kB
 +SwapTotal:             0 kB
 +SwapFree:              0 kB
 +Dirty:                 0 kB
 +Writeback:             0 kB
 +AnonPages:          8624 kB
 +Mapped:             6872 kB
 +Slab:              15764 kB
 +SReclaimable:        596 kB
 +SUnreclaim:        15168 kB
 +PageTables:          472 kB
 +NFS_Unstable:          0 kB
 +Bounce:                0 kB
 +WritebackTmp:          0 kB
 +CommitLimit:       29308 kB
 +Committed_AS:      12396 kB
 +VmallocTotal:    1032148 kB
 +VmallocUsed:        7816 kB
 +VmallocChunk:    1009912 kB
 +</code>
 +
 +==== Mounted devices ====
 +<code>
 +# cat /proc/mounts
 +rootfs / rootfs rw 0 0
 +mtd:rootfs2 / jffs2 ro,relatime 0 0
 +proc /proc proc rw,relatime 0 0
 +sysfs /sys sysfs rw,relatime 0 0
 +devpts /dev/pts devpts rw,relatime,mode=600,ptmxmode=000 0 0
 +/dev/mtdblock3 /data jffs2 rw,relatime 0 0
 +/dev/mtdblock4 /userconfig jffs2 rw,relatime 0 0
 +tmpfs /var tmpfs rw,relatime,size=8192k 0 0
 +none /mnt ramfs rw,noatime,nodiratime 0 0
 +/dev/sda1 /mnt/usb1_1 vfat rw,noatime,nodiratime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp936,iocharset=cp936 0 0
 +</code>
 +
 +==== Ethernet configuration ====
 +<code>
 +# ifconfig
 +br0       Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          inet addr:192.168.101.100  Bcast:192.168.101.255  Mask:255.255.255.0
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:1089479 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:1684360 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:
 +          RX bytes:244254662 (232.9 MiB)  TX bytes:2166184110 (2.0 GiB)
 +
 +eth0      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +          
 +
 +eth1      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +          
 +
 +eth2      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +eth3      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +          
 +
 +ethw      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:1923696 errors:0 dropped:451 overruns:0 frame:0
 +          TX packets:1042539 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:2219970743 (2.0 GiB)  TX bytes:263348589 (251.1 MiB)
 +          
 +
 +lo        Link encap:Local Loopback  
 +          inet addr:127.0.0.1  Mask:255.0.0.0
 +          UP LOOPBACK RUNNING  MTU:16436  Metric:1
 +          RX packets:52253 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:52253 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:
 +          RX bytes:12323600 (11.7 MiB)  TX bytes:12323600 (11.7 MiB)
 +
 +mii0      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +          Base address:0xda00 
 +
 +nbif0     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          inet addr:94.29.61.249  Bcast:94.29.63.255  Mask:255.255.248.0
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:1761527 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:999379 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:100 
 +          RX bytes:2178454639 (2.0 GiB)  TX bytes:248695177 (237.1 MiB)
 +
 +nbif1     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7B  
 +          inet addr:10.231.49.144  Bcast:10.231.63.255  Mask:255.255.224.0
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:161718 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:161175 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:100 
 +          RX bytes:33786074 (32.2 MiB)  TX bytes:33237783 (31.6 MiB)
 +
 +vlan3     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +vlan5     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +wlan0     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:1037628 errors:0 dropped:0 overruns:0 frame:20150756
 +          TX packets:1752994 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:249530039 (237.9 MiB)  TX bytes:2182251800 (2.0 GiB)
 +          Interrupt:24 
 +
 +</code>
 +
 +==== Miscellaneous ====
 +V3.0
 +<code>
 +# cat /proc/soc_type 
 +L2 Enabled
 +L2 ECC Enabled
 +L2 Prefetch Disabled
 +Write Allocate Disabled
 +CPU Streaming Disabled
 +CPU Config Reg = 0x00130032
 +L2 Config Reg = 0x0000010c
 +
 +# cat /proc/board_type       
 +ZTE-88F6560-FXXX
 +
 +# cat /proc/pon_type       
 +gpon
 +</code>
 +
 +==== Factory Firmware ====
 +V3.0
 +[[http://www.mediafire.com/folder/wsejvf9zyivm8|BOOTLDR.bin]]
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>bcm63xx bcm6818 unsupported}}
  • Last modified: 2023/06/24 10:23
  • by catzy007