Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:zte:zxa10f660 [2015/07/24 13:34] – created poshattoh:zte:zxa10f660 [2023/06/19 13:37] – [Table] catzy007
Line 1: Line 1:
 +====== ZTE ZXA10 F660 ======
  
 +===== OpenWrt support =====
 +
 +<color red>**Not supported.**</color>
 +
 +Some work in here: https://forum.openwrt.org/t/openwrt-now-support-zte-f660-v3-0-and-hgg420n/101136
 +===== Hardware =====
 +==== Info ====
 +^ Revision                                                      | V3.0                                                        |
 +^ [[wp>Instruction set]]                                        | [[wp>ARM9|ARM9]]                                            |
 +^ Vendor                                                        | [[wp>Marvell Technology Group|Marvell]]                     |
 +^ [[docs:techref:bootloader]]                                   | [[docs:techref:bootloader:uboot|U-Boot]]                    |
 +^ [[docs:techref:hardware:soc|System-On-Chip]]                  | MV88F6560                                                   |
 +^ [[docs:techref:hardware:cpu|CPU]] @Frq                        | (?)MHz                                                      |
 +^ Flash size                                                    | 128 MiB / 32 MiB                                            |
 +^ Flash Chip                                                    | SPANSION S34ML01G100TF100                                   |
 +^ RAM size                                                      | 128 MB                                                      |
 +^ RAM Chip                                                      | SK Hynix H5TQ1G63DFR-H9C                                    |
 +^ Wireless No1                                                  | Realtek RTL8192CE 2.4GHz 802.11b/g/                       |
 +^ [[docs:techref:hardware:Switch]]                              | (?)                                                         |
 +^ [[docs:techref:hardware:internet.access.technologies|Modem]]  | (?) TW2362G-CDEH GPON ONU 2x10                              |
 +^ USB                                                           | Yes 1 x 2.0, connector not present on some board revisions  |
 +^ [[docs:techref:hardware:port.serial|Serial]]                  | Yes                                                         |
 +^ [[docs:techref:hardware:port.jtag|JTAG]]                      | (?)                                                         |
 +
 +==== Photos ====
 +{{https://catzy007.github.io/things/f660v3/top.jpg?400|ZXA10 F660 V3 Top}}
 +{{https://catzy007.github.io/things/f660v3/bottom.jpg?400|ZXA10 F660 V3 Bottom}}
 +
 +==== Opening the case ====
 +**Note:** This will void your warranty!
 +
 +  * To remove the cover and open the device, remove rubber feet and screws. Opening the plastic case will be painful, try not to break the tiny plastic pieces.
 +
 +//Main PCB://\\
 +{{https://catzy007.github.io/things/f660v3/board-top.jpg?400|ZXA10 F660 V3 Board Top}}
 +{{https://catzy007.github.io/things/f660v3/board-bottom.jpg?400|ZXA10 F660 V3 Board Bottom}}
 +
 +==== Serial ====
 +Serial is located near the power button.
 +
 +Settings: 115200, 3v3 TTL
 +
 +{{https://catzy007.github.io/things/f660v3/serial.jpg?400|ZXA10 F660 V3 Board Bottom}}
 +
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<code>
 +BootROM 1.34
 +Booting from NAND flash
 +BootROM: Image checksum verification PASSED
 +
 +
 +U-Boot 2009.08 (May 27 2015 - 09:16:04)
 +
 +Hit enter to stop autoboot: 
 +
 +Starting kernel ...
 +
 +[ethSetPortConf]iPortNum = 0...................
 +                                               [ethSetPortConf]iPortNum = 3...................
 +                                                                                              [ethSetPortConf]iPortNum = 2...................
 +                                                                                                                                             [ethSetPortConf]iPortNum = 1...................
 +                                                                                                                                                                                            ==========================sys process start=========================
 +Omci get Byte Order is Little-Endian
 +g_bByteSort(0)
 +=====================omci sender process start=====================
 +=====================omci execute process start=====================
 +======================omci debug process start======================
 +VOP_TaskEntry entered:POWER ON!!!wState:0
 +                                         VOP_DSP2RtraceTaskEntry entered:POWER ON!!!wState:0
 +                                                                                            VOP_DspTraceTaskEntery entered:POWER ON!!!wState:0
 +                                                                                                                                              ~~~SLC_Initial Slic_type: 1  ZXA10_F620G_ODM
 +=====11930:23:17 [================upnp_igd][Warn] ====omci process[upnpigd.c(199)U start==========PnPIGDStart] Cal===============
 + g_MeCtr_Configd!UPnPIGDProcessure=0x00000000,gRestart ret = -1_MeCtr_CreateMar06                                                l function faile
 +k1=0x00000000,g_MeCtr_CreateMark2=0x00000000
 +Call CmDevGetDevInfoConf success! the HardwareVer is V3.0
 +OmciAdapter get_onu_g_version V3.0
 +OmciAdapter_get_serial_number result:0 sn:ZTEG0xc041e620
 +OmciAdapter get_loid ZTEGC041E620
 +OmciAdapter get_loid_pwd GC041E620
 +Process_Perf's Event(4352) is not support !! 
 +11930:23:17 [KIGMP][Error] [br_mld.c(1625)mld_deal_data] packet from br0, drop it!
 +Using /kmodule/slc/usrline.ko
 +                             SLC:User Siliconlab Driver V3.0.0 Init Finish.
 +Initial Config NOPTC F460MV/F420MV: 37.
 +Find a chan 0, cs 0
 +Find a chan 0, cs 1
 +cann't Find a chan  2
 +cann't Find a chan  3
 +cann't Find a chan  4
 +cann't Find a chan  5
 +cann't Find a chan  6
 +cann't Find a chan  7
 +Init port  0
 +mii0: link up
 +mii2: link up
 +Port 3: Link-up, Full-duplex, Speed-100Mbps.
 +cpcp port 3 state change!
 +11930:23:19 [KIGMP][Error] [br_mld.c(1625)mld_deal_data] packet from br0, drop it!
 +Siliconlab chip Si32176 found! 0 
 +Init port  1
 +Siliconlab chip Si32176 found! 1 
 +11930:23:25 [OSS_httpd][Error] [oss_comm.c(2300)SocketSynSendMs] SocketSynSendMsg s32ActCount = 0  errno  = 0 !!! 
 +11930:23:25 [OSS_telnetd][Error] [oss_comm.c(2300)SocketSynSendMs] SocketSynSendMsg s32ActCount = 0  errno  = 0 !!! 
 +11930:23:25 [OSS_gpon_omci][Error] [oss_comm.c(2300)SocketSynSendMs] SocketSynSendMsg s32ActCount = 0  errno  = 0 !!! 
 +11930:23:25 [OSS_gpon_omci][Error] [oss_comm.c(2303)SocketSynSendMs] APPID[0x84] send EVENT[0x2402] to APPID[0x1] dwUsedTicks[852] timeout !!!
 +11930:23:25 [OSS_gpon_omci][Error] [oss_common.c(664)SSEND] [omci][00840101] SSEND Send Message[0X2402] to [00010182] socket failed  
 +11930:23:25 [omci][Error] [pon_eth_cmapi.c(4561)CmEthGetPortLin] CmSendMsg2MM return error iRet=-3!
 +11930:23:25 [omci][Error] [pon_eth_cmapi.c(352)CmUniGetPortCon] CmEthGetPortLinkState error!
 +(Slot:0, Port:0)Call CmUniGetPortConfig error, i11930:23:25 [Ret = -3
 +OSS_httpd][Error] [oss_comm.c(2303)SocketSynSendMs] APPID[0x3] send EVENT[0x9701] to APPID[0x1] dwUsedTicks[854] timeout !!!
 +11930:23:25 [OSS_httpd][Error] [oss_common.c(664)SSEND] [webd][00030101] SSEND Send Message[0X9701] to [00010102] socket failed  
 +11930:23:25 [webd][Error] [fw_api.c(274)fwPortRegisterA] fwPortRegisterApi chItemID:WEB wEvent:9701 iRet:7ffe0005 FAILURE!
 +11930:23:25 [OSS_httpd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[webd] Event[0x1100] dwUsedTicks[868]
 +11930:23:25 [tr069][Warn] [notify_value_ch(273)NotifyListFind] parameter is NULL!
 +addr 44, data 0x0
 +addr 44, data 0x0
 +addr 44, data 0x0
 +addr 44, data 0x0
 +11930:23:26 [OSS_voip][Warn] [oss_sche.c(701)RunProcess] RunProcess process[SLCCONTROL] Event[0x6511] dwUsedTicks[874]
 +11930:23:26 [OSS_telnetd][Error] [oss_comm.c(2303)SocketSynSendMs] APPID[0x3d] send EVENT[0x9702] to APPID[0x1] dwUsedTicks[847] timeout !!!
 +11930:23:26 [OSS_telnetd][Error] [oss_common.c(664)SSEND] [telnetd][003D0101] SSEND Send Message[0X9702] to [00010102] socket failed  
 +11930:23:26 [telnetd][Error] [fw_api.c(274)fwPortRegisterA] fwPortRegisterApi chItemID:TELNET wEvent:9702 iRet:7ffe0005 FAILURE!
 +11930:23:26 [OSS_cspd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[firewall] Event[0x9701] dwUsedTicks[895]
 +11930:23:26 [OSS_upnpd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[upnp_cp] Event[0x1103] dwUsedTicks[899]
 +11930:23:26 [OSS_telnetd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[telnetd] Event[0x1103] dwUsedTicks[910]
 +11930:23:26 [OSS_gpon_omci][Warn] [oss_comm.c(2119)SynMsgCheck] Ack wEvent = 0x2402 Msg wEvent = 0x2402  wAckLen = 104 wAckBuffLen = 8192 wAckCheck = 1 wSynCheck = 4
 +Sub_SNOntStaticDB:Don't create meclass:350!
 +Omci Debug:CmWLANListConfig.dwCount = 4 
 +[ethSetPortConf]iPortNum = 0...................
 +                                               [ethSetPortConf]iPortNum = 3...................
 +                                                                                              [ethSetPortConf]iPortNum = 2...................
 +                                                                                                                                             [ethSetPortConf]iPortNum = 1...................
 +                                                                                                                                                                                            wlan_get_ssid_control: cur user=0 
 +                   [XCK]eWEPAuthMode 0, eBeaconType 2, eWPAAuthMode 0, e11iAuthMode 0 
 +wlan_get_ssid_control: cur user=0 
 +                                  [XCK]eWEPAuthMode 0, eBeaconType 2, eWPAAuthMode 0, e11iAuthMode 0 
 +wlan_get_ssid_control: cur user=0 
 +                                  [XCK]eWEPAuthMode 0, eBeaconType 2, eWPAAuthMode 0, e11iAuthMode 0 
 +wlan_get_ssid_control: cur user=0 
 +                                  [XCK]eWEPAuthMode 0, eBeaconType 2, eWPAAuthMode 0, e11iAuthMode 0 
 +11930:23:27 [omci][Error] [pon_version_mgr(427)GetVersionNumbe] <GetVersionNumberString>(427)bVersionNumber:V2.30.20P5T4S
 +11930:23:27 [omci][Error] [pon_version_mgr(427)GetVersionNumbe] <GetVersionNumberString>(427)bVersionNumber:V2.30.20P8T8S
 +11930:23:27 [OSS_gpon_omci][Error] [oss_common.c(330)OSSSendAckData] [omci]OSSSendAckData[3E81] wAckLen = 4  wAckBuffLen = 0 [sender = 00840301]!!! 
 +power status is 0x9e!!!
 +step into Initialize_ALL_Dot1ag_MEs
 +step into Clear_All_Dot1ag_MEP
 +step into Clear_All_Dot1ag_MA
 +step into Clear_All_Dot1ag_MD
 +[ADAPTER]Set Gpon Up!!!
 +[mvGponStart]sn :ZTEGc041e620, pwd:GC041E620
 +ERROR: (mv_pon/core/gpon/gonuGponApi.c:822) onuGponApiGemPortIdClearONUMACDRV_GetTco[ADAPTER]Set GpontBufferSize: van Up!!!
 +lue(0) is out of[mvGponStart] range, use def sn :ZTEGc041e620value:256 
 +, pwd:GC041E620
 +[ADAPTER]Set Gpon Up!!!
 +[mvGponStart]sn :ZTEGc041e620, pwd:GC041E620
 +
 + ZTE----pon li11930:23:31 [nk activate succOSS_gpon_omci][Wess!
 +arn] [oss_sche.c(701)RunProcess] RunProcess process[omci] Event[0x3e81] dwUsedTicks[1420]
 +==========================alarm process start=======================
 +======================perf process start=====================
 +Process_Perf's Event(4355) is not support !! 
 +[Leaf_omciexception]exception msg is NULL!
 +Omci Debug:tIGMPList.dwCount = 8 
 +11930:23:31 [RCA][Warn] [rcm_main.c(105)RCM_Main] {RCM_Main} RCA_Watchdog wRegistdogRtn[0],[0:ok]
 +-----VOP_TaskEntopen DSP_dev ry entered:DSP Sdriver!
 +TART WORK!!!----UDP MOD START---wState:1
 +
 +open DSP_TRACE driver!
 +addr 44, data 0x0
 +addr 44, data 0x0
 +addr 44, data 0x0
 +addr 44, data 0x0
 +ssid set 0 
 +Configuration file: /var/secrtlx
 +                                Using interface wlan0 with hwaddr 54:22:f8:bf:e7:9b and ssid 'ZTE-bfe79b'
 +                                                                                                         Setting MTU failed - trying to s[PHY_ConfigMACWithParaFile][MACPHY_REG_92C]
 +[PHY_ConfigBBWithParaFile][PHY_REG_PG]
 +===> Load_92C_Firmware
 +<=== Load_92C_Firmware
 +urvive with current value
 +                         kTPTd_0 Thread create successfully!
 +br0: port 6(wlan0) entering learning state
 +br0: topology change detected, propagating
 +br0: port 6(wlan0) entering forwarding state
 +11930:23:33 [OSS_cspd][Warn] [oss_sche.c(701)RunProcess] RunProcess process[wlan_config] Event[0x1154] dwUsedTicks[709]
 +</code>
 +</WRAP>
 +
 +===== Info =====
 +==== BusyBox version ====
 +<code>
 +BusyBox v1.01 (2012.11.27-11:12+0000) multi-call binary
 +
 +Usage: busybox [function] [arguments]...
 +   or: [function] [arguments]...
 +
 +        BusyBox is a multi-call binary that combines many common Unix
 +        utilities into a single executable.  Most people will create a
 +        link to busybox for each function they wish to use and BusyBox
 +        will act like whatever it was invoked as!
 +
 +Currently defined functions:
 +        [, arping, ash, brctl, busybox, cat, chmod, cp, cut, date, df,
 +        echo, egrep, env, fgrep, free, fuser, getty, grep, hexdump, hostname,
 +        ifconfig, init, insmod, kill, killall, klogd, linuxrc, ln, login,
 +        ls, lsmod, mkdir, mknod, modprobe, mount, mv, ping, ps, pwd, reboot,
 +        rm, rmdir, rmmod, route, sed, sh, sleep, test, tftp, top, traceroute,
 +        umount, wget
 +</code>
 +
 +==== CPU info ====
 +<code>
 +# cat /proc/cpuinfo
 +system type             : 
 +processor               : 0
 +cpu model               : Broadcom4350 V7.0
 +BogoMIPS                : 359.42
 +wait instruction        : yes
 +microsecond timers      : yes
 +tlb_entries             : 32
 +extra interrupt vector  : no
 +hardware watchpoint     : no
 +ASEs implemented        :
 +shadow register sets    : 1
 +core                    : 0
 +VCED exceptions         : not available
 +VCEI exceptions         : not available
 +
 +unaligned exceptions            : 5122342
 +
 +==== MTD mapping ====
 +# cat /proc/mtd
 +dev:    size   erasesize  name
 +mtd0: 00004000 00004000 "nvram"
 +mtd1: 00dfc000 00004000 "rootfs1"
 +mtd2: 00dfc000 00004000 "rootfs2"
 +mtd3: 00100000 00004000 "data"
 +mtd4: 00200000 00004000 "usercfg"
 +
 +==== Kernel supported devices ====
 +# # cat /proc/devices
 +Character devices:
 +  1 mem
 +  2 pty
 +  3 ttyp
 +  4 ttyS
 +  5 /dev/tty
 +  5 /dev/console
 +  5 /dev/ptmx
 + 10 misc
 + 83 ethdriver
 + 89 i2c
 + 97 ledkey_m
 +108 ppp
 +109 optical_dev
 +128 ptm
 +136 pts
 +180 usb
 +189 usb_device
 +206 brcmboard
 +209 endpoint
 +211 usrline
 +232 pktcmf
 +233 spu
 +235 bcm_user_ploam
 +236 bcm_omci
 +237 bcm_ploam
 +238 bcmvlan
 +242 fcache
 +254 usb_endpoint
 +
 +Block devices:
 +259 blkext
 +  8 sd
 + 31 mtdblock
 + 65 sd
 + 66 sd
 + 67 sd
 + 68 sd
 + 69 sd
 + 70 sd
 + 71 sd
 +128 sd
 +129 sd
 +130 sd
 +131 sd
 +132 sd
 +133 sd
 +134 sd
 +135 sd
 +</code>
 +
 +V3.0
 +<code>
 +# cat /proc/cpuinfo
 +Processor       : ARM926EJ-S rev 1 (v5l)
 +BogoMIPS        : 996.14
 +Features        : swp half thumb fastmult edsp 
 +CPU implementer : 0x56
 +CPU architecture: 5TE
 +CPU variant     : 0x2
 +CPU part        : 0x131
 +CPU revision    : 1
 +Cache type      : write-back
 +Cache clean     : cp15 c7 ops
 +Cache lockdown  : format C
 +Cache format    : Harvard
 +I size          : 16384
 +I assoc         : 4
 +I line length   : 32
 +I sets          : 128
 +D size          : 16384
 +D assoc         : 4
 +D line length   : 32
 +D sets          : 128
 +
 +Hardware        : Feroceon-KW2
 +Revision        : 0000
 +Serial          : 0000000000000000
 +
 +# cat /proc/mtd
 +dev:    offset   size   erasesize  name
 +mtd0: 00000000 08000000 00020000 "whole flash"
 +mtd1: 00000000 00200000 00020000 "u-boot"
 +mtd2: 03000000 00400000 00020000 "parameter tags"
 +mtd3: 00200000 01400000 00020000 "kernel0"
 +mtd4: 03c00000 00400000 00020000 "middleware"
 +mtd5: 03400000 00800000 00020000 "usercfg"
 +mtd6: 01600000 01400000 00020000 "kernel1"
 +mtd7: 02a00000 00600000 00020000 "others"
 +
 +# cat /proc/devices
 +Character devices:
 +  1 mem
 +  2 pty
 +  3 ttyp
 +  4 /dev/vc/0
 +  4 tty
 +  4 ttyS
 +  5 /dev/tty
 +  5 /dev/console
 +  5 /dev/ptmx
 +  7 vcs
 + 10 misc
 + 13 input
 + 83 ethdriver
 + 90 mtd
 + 97 ledkey_m
 +100 telephony
 +102 gpondrv_dev
 +104 switch_dev
 +105 switch_tst
 +108 ppp
 +109 optical_dev
 +123 watchdog
 +128 ptm
 +136 pts
 +180 usb
 +188 ttyUSB
 +189 usb_device
 +200 tdm_marvell
 +211 usrline
 +220 dsp_dev
 +232 pon
 +233 tpm
 +254 usb_endpoint
 +
 +Block devices:
 +  1 ramdisk
 +  8 sd
 + 31 mtdblock
 + 65 sd
 + 66 sd
 + 67 sd
 + 68 sd
 + 69 sd
 + 70 sd
 + 71 sd
 + 93 nftl
 +128 sd
 +129 sd
 +130 sd
 +131 sd
 +132 sd
 +133 sd
 +134 sd
 +135 sd
 +</code>
 +==== SerialPort params ====
 +<code>
 +# cat /proc/cmdline
 +root=mtd:rootfs2 ro rootfstype=jffs2 console=ttyS0,115200
 +</code>
 +
 +==== Linux kernel version ====
 +<code>
 +# cat /proc/version
 +Linux version 2.6.30 (wangkai@localhost.localdomain) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #329 Tue Nov 27 19:08:42 CST 2012
 +</code>
 +
 +==== System version ====
 +<code>
 +# cat /etc/version
 +Tue Nov 27 18:56:54 CST 2012
 +</code>
 +
 +==== Process list ====
 +<code>
 +# ls /proc
 +1             1090          346                       kpagecount
 +10            1091          347           985           kpageflags
 +1000          1092          348           988           led
 +1002          1093          349           991           loadavg
 +1005          1094          366           994           locks
 +1006          1095          4             995           meminfo
 +1007          1096          421           996           mii
 +1008          1097          422           997           misc
 +1009          11            431           999           modules
 +1010          1102          433           arpspf        mounts
 +1011          115           434           b3450_reg     mtd
 +1022          116           435           b3450reg      net
 +1025          117           436           bcmlog        nvram
 +1026          119           437           br_hook       omci
 +1027          12            438           brcm          pagetypeinfo
 +1028          1249          439           buddyinfo     partitions
 +1029          1257          440           bus           pktcmf
 +1030          1259          441           capability    ploam
 +1050          1261          442           catv_val      scsi
 +1051          1281          445           cmdline       self
 +1052          13            457           cpuinfo       slabinfo
 +1053          1322          459           crypto        stat
 +1054          1367          460           csp           switch
 +1055          148           461           devices       sys
 +1061          1525          463           diskstats     sysvipc
 +1063          1531          485           driver        timer_list
 +1064          16            5             execdomains   tty
 +1065          17            6             fcache        uptime
 +1067          186           699           filesystems   version
 +1068          187                       fs            vmallocinfo
 +1069          198           705           i2c_gpon      vmstat
 +1070          199           709           interrupts    watchdog
 +1071          2             710           iomem         wb
 +1072          3             711           ioports       zoneinfo
 +1084          334           712           irq           zteinfo
 +1085          335           713           kallsyms
 +1086          336           74            kcore
 +1087          344                       kfp
 +1088          345           83            kmsg
 +</code>
 +
 +==== Loaded modules list ====
 +<code>
 +# lsmod
 +Module                  Size  Used by
 +wl 2468384 0 - Live 0xc0fd2000 (P)
 +usb_led 1792 0 - Live 0xc0b60000
 +optical 30496 0 - Live 0xc0b50000
 +netdriver 45728 0 - Live 0xc0b31000
 +bcmvlan 62000 0 - Live 0xc0b09000 (P)
 +bcmgpon 453776 2 - Live 0xc0a7c000 (P)
 +gpon_i2c 15472 0 - Live 0xc09d7000
 +bcm3450 13648 0 - Live 0xc09c6000
 +i2c_bcm6xxx 9008 0 - Live 0xc09b6000
 +endpointdd 2081584 2 - Live 0xc07b1000 (P)
 +dspdd 1889440 1 endpointdd, Live 0x8108c740 (P)
 +bcm_enet 372672 1 netdriver, Live 0xc03b6000
 +bspdriver 39456 5 usb_led,optical,netdriver, Live 0xc0348000
 +pktcmf 1837328 1 bcm_enet, Live 0xc0172000 (P)
 +pktflow 59696 1 pktcmf, Live 0xc007a000 (P)
 +</code>
 +
 +V3.0
 +<code>
 +# lsmod
 +Module                  Size  Used by
 +usrline 138068 4 - Live 0xbf21e000
 +rtl8192cd 523398 0 - Live 0xbf19d000
 +option 8108 0 - Live 0xbf19a000
 +usbserial 26088 1 option, Live 0xbf192000
 +redirusb 18932 0 [permanent], Live 0xbf18c000
 +usb_led 1668 0 - Live 0xbf18a000
 +uhci_hcd 20460 0 - Live 0xbf184000
 +ehci_hcd 31020 0 - Live 0xbf17b000
 +usbcore 113692 6 option,usbserial,usb_led,uhci_hcd,ehci_hcd, Live 0xbf15e000
 +l3fastpath 42776 0 - Live 0xbf152000
 +dsp_dev 198176 4 - Live 0xbf120000
 +voip_codec 333532 1 dsp_dev, Live 0xbf0cd000
 +kudp 43296 2 dsp_dev,voip_codec, Live 0xbf0c1000
 +netdriver 37992 0 - Live 0xbf0b6000
 +optical 39300 0 - Live 0xbf0ab000
 +gpondrv 35748 1 netdriver, Live 0xbf0a1000
 +mv_gpon 350204 2 netdriver,gpondrv, Live 0xbf04a000
 +switch 215964 2 l3fastpath,netdriver, Live 0xbf014000
 +tagparam_mod 4708 0 - Live 0xbf011000
 +bspdriver 65092 6 usrline,optical,gpondrv,switch, Live 0xbf000000
 +</code>
 +==== Memory information ====
 +<code>
 +# cat /proc/meminfo
 +MemTotal:          58620 kB
 +MemFree:            3920 kB
 +Buffers:              20 kB
 +Cached:            21684 kB
 +SwapCached:            0 kB
 +Active:            10088 kB
 +Inactive:          20200 kB
 +Active(anon):       8584 kB
 +Inactive(anon):        0 kB
 +Active(file):       1504 kB
 +Inactive(file):    20200 kB
 +SwapTotal:             0 kB
 +SwapFree:              0 kB
 +Dirty:                 0 kB
 +Writeback:             0 kB
 +AnonPages:          8624 kB
 +Mapped:             6872 kB
 +Slab:              15764 kB
 +SReclaimable:        596 kB
 +SUnreclaim:        15168 kB
 +PageTables:          472 kB
 +NFS_Unstable:          0 kB
 +Bounce:                0 kB
 +WritebackTmp:          0 kB
 +CommitLimit:       29308 kB
 +Committed_AS:      12396 kB
 +VmallocTotal:    1032148 kB
 +VmallocUsed:        7816 kB
 +VmallocChunk:    1009912 kB
 +</code>
 +
 +==== Mounted devices ====
 +<code>
 +# cat /proc/mounts
 +rootfs / rootfs rw 0 0
 +mtd:rootfs2 / jffs2 ro,relatime 0 0
 +proc /proc proc rw,relatime 0 0
 +sysfs /sys sysfs rw,relatime 0 0
 +devpts /dev/pts devpts rw,relatime,mode=600,ptmxmode=000 0 0
 +/dev/mtdblock3 /data jffs2 rw,relatime 0 0
 +/dev/mtdblock4 /userconfig jffs2 rw,relatime 0 0
 +tmpfs /var tmpfs rw,relatime,size=8192k 0 0
 +none /mnt ramfs rw,noatime,nodiratime 0 0
 +/dev/sda1 /mnt/usb1_1 vfat rw,noatime,nodiratime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp936,iocharset=cp936 0 0
 +</code>
 +
 +==== Ethernet configuration ====
 +<code>
 +# ifconfig
 +br0       Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          inet addr:192.168.101.100  Bcast:192.168.101.255  Mask:255.255.255.0
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:1089479 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:1684360 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:
 +          RX bytes:244254662 (232.9 MiB)  TX bytes:2166184110 (2.0 GiB)
 +
 +eth0      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +          
 +
 +eth1      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +          
 +
 +eth2      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +eth3      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +          
 +
 +ethw      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:1923696 errors:0 dropped:451 overruns:0 frame:0
 +          TX packets:1042539 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:2219970743 (2.0 GiB)  TX bytes:263348589 (251.1 MiB)
 +          
 +
 +lo        Link encap:Local Loopback  
 +          inet addr:127.0.0.1  Mask:255.0.0.0
 +          UP LOOPBACK RUNNING  MTU:16436  Metric:1
 +          RX packets:52253 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:52253 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:
 +          RX bytes:12323600 (11.7 MiB)  TX bytes:12323600 (11.7 MiB)
 +
 +mii0      Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +          Base address:0xda00 
 +
 +nbif0     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          inet addr:94.29.61.249  Bcast:94.29.63.255  Mask:255.255.248.0
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:1761527 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:999379 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:100 
 +          RX bytes:2178454639 (2.0 GiB)  TX bytes:248695177 (237.1 MiB)
 +
 +nbif1     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7B  
 +          inet addr:10.231.49.144  Bcast:10.231.63.255  Mask:255.255.224.0
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:161718 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:161175 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:100 
 +          RX bytes:33786074 (32.2 MiB)  TX bytes:33237783 (31.6 MiB)
 +
 +vlan3     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +vlan5     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
 +wlan0     Link encap:Ethernet  HWaddr 68:1A:B2:92:EA:7A  
 +          UP BROADCAST RUNNING MULTICAST  MTU:1600  Metric:1
 +          RX packets:1037628 errors:0 dropped:0 overruns:0 frame:20150756
 +          TX packets:1752994 errors:0 dropped:0 overruns:0 carrier:0
 +          collisions:0 txqueuelen:1000 
 +          RX bytes:249530039 (237.9 MiB)  TX bytes:2182251800 (2.0 GiB)
 +          Interrupt:24 
 +
 +</code>
 +
 +==== Miscellaneous ====
 +V3.0
 +<code>
 +# cat /proc/soc_type 
 +L2 Enabled
 +L2 ECC Enabled
 +L2 Prefetch Disabled
 +Write Allocate Disabled
 +CPU Streaming Disabled
 +CPU Config Reg = 0x00130032
 +L2 Config Reg = 0x0000010c
 +
 +# cat /proc/board_type       
 +ZTE-88F6560-FXXX
 +
 +# cat /proc/pon_type       
 +gpon
 +</code>
 +
 +==== Factory Firmware ====
 +V3.0
 +[[http://www.mediafire.com/folder/wsejvf9zyivm8|BOOTLDR.bin]]
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>bcm63xx bcm6818 unsupported}}
  • Last modified: 2023/06/24 10:23
  • by catzy007