Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
toh:wavlink:wavlink_wl-wn570ha1 [2022/02/23 07:57] – [OEM installation using the TFTP method] kls0etoh:wavlink:wl-wn570ha1 [2024/10/03 07:17] (current) – Added flashing via U-Boot Web UI noseratio
Line 1: Line 1:
 ====== WAVLINK WL-WN570HA1 ====== ====== WAVLINK WL-WN570HA1 ======
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY.  */ +{{media:wavlink:1.jpg?200|Wavlink AC600}}
-/* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ +
-/* USE https://openwrt.org/meta/create_new_device_page */+
  
 +**AERIAL HD2 – AC600**
  
- +Dual-band High Power Outdoor Wireless AP/Range Extender/Router with PoE and High Gain Antennas
-===== AERIAL HD2 – AC600 ===== +
-=== Dual-band High Power Outdoor Wireless AP/Range Extender/Router with PoE and High Gain Antennas ===+
    
 This device also shows up under the following trade names:  This device also shows up under the following trade names: 
Line 15: Line 12:
   * 7links WLR-600.out   * 7links WLR-600.out
      
 +
 +
 +===== Supported Versions =====
 +<!-- ToH: {
 +  "source": "json",
 +  "dom": "t",
 +  "paging": false,
 +  "rotate": true,
 +  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],
 +  "filterColumns": {"brand": "^WAVLINK$", "model": "^WL-WN570HA1$"}
 +} -->
 +
 +
 +===== Hardware Highlights =====
 +<!-- ToH: {
 +  "source": "json",
 +  "dom": "t",
 +  "paging": false,
 +  "rotate": true,
 +  "shownColumns": ["model", "version", "cpu", "cpumhz", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],
 +  "filterColumns": {"brand": "^WAVLINK$", "model": "^WL-WN570HA1$"}
 +} -->
      
 <WRAP BOX> <WRAP BOX>
Line 34: Line 53:
  
 </WRAP> </WRAP>
- 
- 
- 
-/*****/ 
-/* How to add images ========> http://openwrt.org/meta/adding_images_to_openwrt_wiki */ 
-/*****/ 
- 
-/*{{media:example:genericrouter1.png?200|Generic Router}}    */ 
-{{media:wavlink:1.jpg?200|Wavlink AC600}} 
-{{media:wavlink:2.jpg?200|Wavlink AC600}} 
-{{media:wavlink:4.jpg?200|Wavlink AC600}} 
-{{media:wavlink:wn570ha1_2a.jpg?Wavelink|}} 
-{{media:wavlink:wn570ha1_9a.jpg?Wavelink|}} 
-{{media:wavlink:8.jpg?200|Wavlink AC600}} 
- 
- 
- 
-<WRAP BOX> 
-FIXME 
-===== Getting started with a new Device Page ===== 
-  - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** 
-  - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. 
-  - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it. 
- 
-===== Keep the articles modular ===== 
-  * Please include only model specific information, omit bla,bla and put everything generic into separate articles 
-  * If you have no time to write certain stuff, link to [[docs:start]] 
-  * [[docs:guide-user:base-system:start]] should lead the way, do not explain this again 
-  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. 
-</WRAP> 
- 
-===== Supported Versions ===== 
----- datatable ---- 
-cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid 
-headers : Brand, Model, Version, Current Release, OEM Info, Forum Search, Technical Data 
-align   : c,c,c,c,c,c,c 
-filter  : Brand=WAVLINK 
-filter  : Model=WL-WN570HA1 
----- 
- 
- 
-===== Hardware Highlights ===== 
----- datatable ---- 
-cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
-header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
-align   : c,c,c,c,c,c,c,c,c,c,c,c,c 
-filter  : Brand=WAVLINK 
-filter  : Model=WL-WN570HA1 
----- 
- 
  
 ===== Installation ===== ===== Installation =====
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsSupported Current RelFirmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_urlFirmware OEM Stock URL_url +  "source""json", 
-headers ModelVersionCurrent ReleaseFirmware OpenWrt InstallFirmware OpenWrt UpgradeFirmware OEM Stock +  "dom": "t", 
-align   : c,c,c +  "paging": false, 
-filter  : Brand=WAVLINK +  "rotate": true
-filter  Model=WL-WN570HA1 +  "shownColumns"["model""version""supportedcurrentrel""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl""firmwareoemstockurl"]
-----+  "filterColumns"{"brand": "^WAVLINK$", "model""^WL-WN570HA1$"} 
 +-->
  
 -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
Line 111: Line 81:
   - Configure a TFTP server on your PC/Laptop and set its IP to 192.168.10.100   - Configure a TFTP server on your PC/Laptop and set its IP to 192.168.10.100
   - Rename the OpenWrt image to firmware.bin and place it in the root folder of the TFTP server   - Rename the OpenWrt image to firmware.bin and place it in the root folder of the TFTP server
-  - Power off (using the small sliding power switch on the left sidethe device and connect an ethernet cable from its LAN or WAN port to your PC/Laptop+  - Power off the device (using the power switch on the PoE injector) and connect an ethernet cable from its LAN or WAN port to your PC/Laptop
   - Press the RESET button (and keep it pressed)   - Press the RESET button (and keep it pressed)
-  - Power on the device (using the power switch on the PoE injector)+  - Power on the device
   - After a few seconds, when the WAN/LAN LED stops blinking rapidly, release the RESET button   - After a few seconds, when the WAN/LAN LED stops blinking rapidly, release the RESET button
   - Flashing OpenWrt takes less than a minute, system will reboot automatically   - Flashing OpenWrt takes less than a minute, system will reboot automatically
 +
 +Flashing via U-boot HTTP server (an easy method which worked for Noseratio with a WL-WN570HA1 unit purchased in 2024)
 +
 +  - Power on, wait for the device to settle and reset it via "Reset" button at the bottom of the device
 +  - Configure an Ethernet port on your PC/Laptop to manual IP of 192.168.10.100
 +  - Download the OpenWrt *KERNEL* image (rather than SYSUPGRADE image) for WL-WN570HA1 from https://firmware-selector.openwrt.org
 +  - Rename the OpenWrt image to firmware.bin
 +  - Power off the device (using the power switch on the PoE injector) and connect an ethernet cable from its LAN or WAN port to your PC/Laptop
 +  - Press the RESET button (and keep it pressed)
 +  - Power on the device
 +  - After a few seconds, when the WAN/LAN LED stops blinking rapidly, release the RESET button
 +  - Go to http://192.168.10.1 and flash firmware.bin via U-Boot Web UI
 +  - Wait for a few minutes, until the device LED settle with the first three ("Power", "LAN/WAN" and "WiFi") being on.
 +  - Change your PC Ethernet port IP to 192.168.1.100 or Automatic DHCP, and visit http://192.168.1.1
 +  - You can now flash a SYSUPGRADE image
  
  
Line 234: Line 219:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
----- datatemplatelist dttpllist ---- +<!-- ToH: { 
-templatemeta:template_datatemplatelist +  "source""json", 
-cols    BrandModelVersionsDevice TypeAvailabilitySupported Since Commit_gitSupported since RelSupported current RelUnsupportedInstruction SetSub Instruction SetBootloaderPlatformTargetCPU MHzFlash MBsRAM MBSwitchEthernet 100M ports_Ethernet Gbit ports_Comments network ports_ModemVLANWLAN 2.4GHzWLAN 5.0GHzWLAN HardwaresWLAN Comments_Detachable Antennas_USB ports_SATA ports_Comments USB SATA ports_SerialJTAGLED countButton countPower supplyDevice Techdata_pageidForum topic URL_urlwikidevi URL_urlOEM Device Homepage URL_urlFirmware OEM Stock URL_urlFirmware OpenWrt Install URL_urlFirmware OpenWrt Upgrade URL_urlComments_ +  "dom""t", 
-filter  : Brand=WAVLINK +  "paging"false, 
-filter  Model=WL-WN570HA1 +  "rotate": true, 
-----+  "shownColumns": ["brand""model""version""devicetype""availability""supportedsincecommit""supportedsincerel""supportedcurrentrel""unsupported_functions""bootloader""target""cpumhz""flashmb""rammb""switch""ethernet100mports""ethernet1gports""commentsnetworkports""modem""vlan""wlan24ghz""wlan50ghz""wlanhardware""wlancomments""detachableantennas""usbports""sataports""commentsusbsataports""serial""jtag""ledcount""buttoncount""powersupply""deviceid""owrt_forum_topic_url""wikideviurl""oemdevicehomepageurl""firmwareoemstockurl""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl""comments"]
 +  "filterColumns"{"brand": "^WAVLINK$", "model""^WL-WN570HA1$"} 
 +-->
  
 ==== Photos ==== ==== Photos ====
Line 247: Line 234:
 /* Thanks, your wiki administration - Oct. 2015 */ /* Thanks, your wiki administration - Oct. 2015 */
  
-//Front://\\ 
-**Insert photo of front of the casing** 
  
-//Back://\\ +{{media:wavlink:2.jpg?200|Wavlink AC600}} 
-**Insert photo of back of the casing** +{{media:wavlink:4.jpg?200|Wavlink AC600}} 
- +{{media:wavlink:wn570ha1_2a.jpg|Wavelink|}} 
-//Backside label://\\ +{{media:wavlink:wn570ha1_9a.jpg|Wavelink|}} 
-**Insert photo of backside label**+{{media:wavlink:8.jpg?200|Wavlink AC600}}
  
 ==== Opening the case ==== ==== Opening the case ====
  
-**Note:** This will void your warranty!+**Note:** warranty does not cover damage you caused!
  
 <WRAP BOX> <WRAP BOX>
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...// +  * Unscrew both antennas. 
-  * To remove the cover and open the device, do a/b/c+  * Unscrew copper-coloured antenna mount bolts. 
 +  * Unscrew bottom plastic and remove support and cable. 
 +  * Unscrew grounding screw
 +  * Gently pull out the plastic bottom using notch - be careful not to break the heatsink gel block. 
 +  * Good luck getting that gel block back in the correct position.
 </WRAP> </WRAP>
  
Line 311: Line 300:
  
 ===== Tags ===== ===== Tags =====
-<WRAP BOX> 
-FIXME //Add tags below, then remove this fixme.// 
-</WRAP> 
- 
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>EXAMPLETAG}}+{{tag>ramips mt7688an 8flash 64ram 1port fastethernet 2wnic 802.11bgn 802.11ac 0usb poe outdoor}}
  • Last modified: 2024/10/03 07:17
  • by noseratio