Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:watchguard:firebox-m300 [2024/09/30 07:26] – Add what DHCP command does. evstoh:watchguard:firebox-m300 [2024/10/10 10:33] – Fix boot log to stable and fix issue where boot args were incorrect on the bootlog. evs
Line 66: Line 66:
  
 <code> <code>
 +MB-M300 => setenv serverip 192.168.2.177
 +MB-M300 => setenv ipaddr 192.168.2.182
 MB-M300 => setenv ethact FM1@DTSEC10 MB-M300 => setenv ethact FM1@DTSEC10
-MB-M300 => setenv serverip 192.168.0.193 +MB-M300 => setenv bootargs console=ttyS0,115200 fsl_dpaa_fman.fsl_fm_max_frm=1530 
-MB-M300 => setenv ipaddr 192.168.0.8 +MB-M300 => tftpboot
-MB-M300 => tftpboot openwrt-qoriq-generic-watchguard_firebox-m300-initramfs-fit-uImage.itb+
 Using FM1@DTSEC10 device Using FM1@DTSEC10 device
-TFTP from server 192.168.0.193; our IP address is 192.168.0.8 +TFTP from server 192.168.2.177; our IP address is 192.168.2.182 
-Filename 'openwrt-qoriq-generic-watchguard_firebox-m300-initramfs-fit-uImage.itb'.+Filename 'uImage'.
 Load address: 0x20000000 Load address: 0x20000000
 Loading: ################################################################# Loading: #################################################################
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ################################################################# +  ################################################################# 
-         ####################### +  ##################### 
-         4.MiB/s+  9.MiB/s
 done done
-Bytes transferred = 10823140 (a525e4 hex) +Bytes transferred = 10799520 (a4c9a0 hex) 
-MB-M300 => bootm 0x20000000+MB-M300 => bootm 
 </code> </code>
  
Line 911: Line 913:
 </code> </code>
  
-==== OpenWrt SNAPSHOT ====+==== OpenWrt 23.05.5 ====
  
 <code> <code>
Line 917: Line 919:
    Using 'config-1' configuration    Using 'config-1' configuration
    Trying 'kernel-1' kernel subimage    Trying 'kernel-1' kernel subimage
-     Description:  POWERPC OpenWrt Linux-6.6.52 +     Description:  POWERPC OpenWrt Linux-5.15.167 
-     Created:      2024-09-24  18:59:50 UTC+     Created:      2024-09-23  12:34:46 UTC
      Type:         Kernel Image      Type:         Kernel Image
      Compression:  gzip compressed      Compression:  gzip compressed
      Data Start:   0x200000ec      Data Start:   0x200000ec
-     Data Size:    10784990 Bytes = 10.3 MiB+     Data Size:    10762045 Bytes = 10.3 MiB
      Architecture: PowerPC      Architecture: PowerPC
      OS:           Linux      OS:           Linux
Line 928: Line 930:
      Entry Point:  0x00000000      Entry Point:  0x00000000
      Hash algo:    crc32      Hash algo:    crc32
-     Hash value:   c1864271+     Hash value:   6fdf11b5
      Hash algo:    sha1      Hash algo:    sha1
-     Hash value:   a3ad119c7b538bcf2fd22a2d20d5dd8a3df9d77b+     Hash value:   533d952146431210efc7694883201d85fe88dc7b
    Verifying Hash Integrity ... crc32+ sha1+ OK    Verifying Hash Integrity ... crc32+ sha1+ OK
 ## Loading fdt from FIT Image at 20000000 ... ## Loading fdt from FIT Image at 20000000 ...
Line 936: Line 938:
    Trying 'fdt-1' fdt subimage    Trying 'fdt-1' fdt subimage
      Description:  POWERPC OpenWrt watchguard_firebox-m300 device tree blob      Description:  POWERPC OpenWrt watchguard_firebox-m300 device tree blob
-     Created:      2024-09-24  18:59:50 UTC+     Created:      2024-09-23  12:34:46 UTC
      Type:         Flat Device Tree      Type:         Flat Device Tree
      Compression:  uncompressed      Compression:  uncompressed
-     Data Start:   0x20a49318 +     Data Start:   0x20a43978 
-     Data Size:    36222 Bytes = 35.KiB+     Data Size:    35501 Bytes = 34.KiB
      Architecture: PowerPC      Architecture: PowerPC
      Hash algo:    crc32      Hash algo:    crc32
-     Hash value:   7838adaf+     Hash value:   b4cbd0ce
      Hash algo:    sha1      Hash algo:    sha1
-     Hash value:   bb8d4087b2fcfb6267e695f129aae66b6d9b1361+     Hash value:   1267dafc058b705af961db3690c9f2bfb8febfd2
    Verifying Hash Integrity ... crc32+ sha1+ OK    Verifying Hash Integrity ... crc32+ sha1+ OK
-   Booting using the fdt blob at 0x20a49318+   Booting using the fdt blob at 0x20a43978
    Uncompressing Kernel Image ... OK    Uncompressing Kernel Image ... OK
-   Loading Device Tree to 03fe4000, end 03fffd7d ... OK +   Loading Device Tree to 03fe4000, end 03fffaac ... OK
-[    0.000000] OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr +
-[    0.000000] OF: reserved mem: 0x00000000fe000000..0x00000000feffffff (16384 KiB) map non-reusable bman-fbpr+
 [    0.000000] OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd [    0.000000] OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd
-[    0.000000] OF: reserved mem: 0x00000000ff800000..0x00000000ffbfffff (4096 KiB) map non-reusable qman-fqd 
 [    0.000000] OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr [    0.000000] OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr
-[    0.000000] OF: reserved mem: 0x00000000fc000000..0x00000000fdffffff (32768 KiB) map non-reusable qman-pfdr +[    0.000000] OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr
-[    0.000000] Activating Kernel Userspace Access Protection +
-[    0.000000] Activating Kernel Userspace Execution Prevention+
 [    0.000000] MMU: Supported page sizes [    0.000000] MMU: Supported page sizes
 [    0.000000]          4 KB as direct [    0.000000]          4 KB as direct
Line 967: Line 964:
 [    0.000000]    1048576 KB as direct [    0.000000]    1048576 KB as direct
 [    0.000000] MMU: Book3E HW tablewalk enabled [    0.000000] MMU: Book3E HW tablewalk enabled
-[    0.000000] Linux version 6.6.52 (evan@debian-12-buildopenwrt) (powerpc64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r27578-23ac1ad95114 +[    0.000000] Linux version 5.15.167 (evan@debian-12-buildopenwrt) (powerpc64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24106-10cc5fcd00)4 
-[    0.000000] Hardware name: WatchGuard Firebox M300 e6500 0x80400120 CoreNet Generic+[    0.000000] Using CoreNet Generic machine description
 [    0.000000] printk: bootconsole [udbg0] enabled [    0.000000] printk: bootconsole [udbg0] enabled
 [    0.000000] CPU maps initialized for 2 threads per core [    0.000000] CPU maps initialized for 2 threads per core
Line 982: Line 979:
 [    0.000000] firmware_features = 0x0000000000000000 [    0.000000] firmware_features = 0x0000000000000000
 [    0.000000] ----------------------------------------------------- [    0.000000] -----------------------------------------------------
-[    0.000000] ioremap() called early from of_iomap+0x4c/0x80. Use early_ioremap() instead+[    0.000000] ioremap() called early from .of_iomap+0x44/0x80. Use early_ioremap() instead
 [    0.000000] CoreNet Generic board [    0.000000] CoreNet Generic board
 [    0.000000] barrier-nospec: using isync; sync as speculation barrier [    0.000000] barrier-nospec: using isync; sync as speculation barrier
Line 993: Line 990:
 [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff] [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff]
 [    0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts [    0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts
-[    0.000000] percpu: Embedded 18 pages/cpu s34536 r0 d39192 u131072 +[    0.000000] percpu: Embedded 17 pages/cpu s32472 r0 d37160 u131072 
-[    0.000000] Kernel command line: root=/dev/mmcblk0p2 rw rootdelay=2 console=ttyS0,115200+[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192 
 +[    0.000000] Kernel command line: console=ttyS0,115200 fsl_dpaa_fman.fsl_fm_max_frm=1530
 [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
 [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
-[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192 
 [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
-[    0.000000] Memory: 4036100K/4194304K available (10712K kernel code, 936K rwdata, 2308K rodata, 17312K init, 300K bss, 158204K reserved, )+[    0.000000] Memory: 3968128K/4194304K available (9756K kernel code, 1048K rwdata, 1924K rodata, 19576K init, 307K bss, 226176K reserved, )
 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
 [    0.000000] rcu: Hierarchical RCU implementation. [    0.000000] rcu: Hierarchical RCU implementation.
Line 1010: Line 1007:
 [    0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff [    0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff
 [    0.000000] mpic: Initializing for 512 sources [    0.000000] mpic: Initializing for 512 sources
-[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. +[    0.000001] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x8a60dd6a9, max_idle_ns: 440795204056 ns 
-[    0.000002] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x8a60dd6a9, max_idle_ns: 440795204056 ns +[    0.010191] clocksource: timebase mult[1aaaaaab] shift[24] registered 
-[    0.010232] clocksource: timebase mult[1aaaaaab] shift[24] registered +[    0.018826] Console: colour dummy device 80x25 
-[    0.018981] Console: colour dummy device 80x25 +[    0.023207] pid_max: default: 32768 minimum: 301 
-[    0.023364] pid_max: default: 32768 minimum: 301 +[    0.028094] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) 
-[    0.029981] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) +[    0.035419] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) 
-[    0.037305] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) +[    0.044449] rcu: Hierarchical SRCU implementation. 
-[    0.047618] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. +[    0.049451] smp: Bringing up secondary CPUs ... 
-[    0.055221] rcu: Hierarchical SRCU implementation. +[    0.056676] smp: Brought up 1 node, 8 CPUs 
-[    0.059924] rcu:     Max phase no-delay instances is 1000. +[    0.064922] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
-[    0.065465] smp: Bringing up secondary CPUs ... +[    0.074683] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) 
-[    0.070145] Activating Kernel Userspace Access Protection +[    0.082264NETRegistered PF_NETLINK/PF_ROUTE protocol family 
-[    0.075810] Activating Kernel Userspace Access Protection +[    0.088540thermal_sysRegistered thermal governor 'step_wise' 
-[    0.081428] Activating Kernel Userspace Access Protection +[    0.088720cpuidleusing governor teo 
-[    0.087055] Activating Kernel Userspace Access Protection +[    0.110055MachineWatchGuard Firebox M300 
-[    0.092670] Activating Kernel Userspace Access Protection +[    0.114236SoC familyQorIQ T2080 
-[    0.098291] Activating Kernel Userspace Access Protection +[    0.117718SoC IDsvr:0x85390011, Revision: 1.1 
-[    0.103916] Activating Kernel Userspace Access Protection +[    0.125167] Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->0 
-[    0.109318] smp: Brought up 1 node, 8 CPUs +[    0.133004] PCI host bridge /pcie@ffe240000  ranges: 
-[    0.118474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns +[    0.137960]  MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000  
-[    0.128232] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) +[    0.145176]   IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000 
-[    0.137356MachineWatchGuard Firebox M300 +[    0.152327] /pcie@ffe240000: PCICSRBAR @ 0xdf000007 
-[    0.141542SoC familyQorIQ T2080 +[    0.157172] setup_pci_atmu: end of DRAM 100000000 
-[    0.145014SoC IDsvr:0x85390011, Revision: 1.1 +[    0.161870] /pcie@ffe240000: Setup 64-bit PCI DMA window 
-[    0.150770NETRegistered PF_NETLINK/PF_ROUTE protocol family +[    0.167165] /pcie@ffe240000: DMA window size is 0xdf000007 
-[    0.157153thermal_sysRegistered thermal governor 'step_wise' +[    0.172959] Found FSL PCI host bridge at 0x0000000ffe250000. Firmware bus number: 0->0 
-[    0.157195cpuidleusing governor teo +[    0.180794] PCI host bridge /pcie@ffe250000  ranges: 
-[    0.177242] Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->0 +[    0.185751]  MEM 0x0000000c20000000..0x0000000c2fffffff -> 0x00000000e0000000  
-[    0.185076] PCI host bridge /pcie@ffe240000  ranges: +[    0.192966]   IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000 
-[    0.190042]  MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000  +[    0.200109] /pcie@ffe250000: PCICSRBAR @ 0xff000007 
-[    0.197249]   IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000 +[    0.204962] setup_pci_atmu: end of DRAM 100000000 
-[    0.204402] /pcie@ffe240000: PCICSRBAR @ 0xdf000007 +[    0.209660] /pcie@ffe250000: Setup 64-bit PCI DMA window 
-[    0.209244] setup_pci_atmu: end of DRAM 100000000 +[    0.214955] /pcie@ffe250000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo. 
-[    0.213945] /pcie@ffe240000: Setup 64-bit PCI DMA window +[    0.228607] /pcie@ffe250000: DMA window size is 0xe0000000 
-[    0.219245] /pcie@ffe240000: DMA window size is 0xdf000007 +[    0.234399] Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->0 
-[    0.224977] Found FSL PCI host bridge at 0x0000000ffe250000. Firmware bus number: 0->0 +[    0.242235] PCI host bridge /pcie@ffe260000  ranges: 
-[    0.232815] PCI host bridge /pcie@ffe250000  ranges: +[    0.247192]  MEM 0x0000000c30000000..0x0000000c3fffffff -> 0x00000000e0000000  
-[    0.237771]  MEM 0x0000000c20000000..0x0000000c2fffffff -> 0x00000000e0000000  +[    0.254407]   IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000 
-[    0.244987]   IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000 +[    0.261550] /pcie@ffe260000: PCICSRBAR @ 0xff000007 
-[    0.252129] /pcie@ffe250000: PCICSRBAR @ 0xff000007 +[    0.266403] setup_pci_atmu: end of DRAM 100000000 
-[    0.256986] setup_pci_atmu: end of DRAM 100000000 +[    0.271101] /pcie@ffe260000: Setup 64-bit PCI DMA window 
-[    0.261679] /pcie@ffe250000: Setup 64-bit PCI DMA window +[    0.276396] /pcie@ffe260000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo. 
-[    0.266975] /pcie@ffe250000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo. +[    0.290047] /pcie@ffe260000: DMA window size is 0xe0000000 
-[    0.280627] /pcie@ffe250000: DMA window size is 0xe0000000 +[    0.295836] Found FSL PCI host bridge at 0x0000000ffe270000. Firmware bus number: 0->0 
-[    0.286376] Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->0 +[    0.303672] PCI host bridge /pcie@ffe270000  ranges: 
-[    0.294215] PCI host bridge /pcie@ffe260000  ranges: +[    0.308629]  MEM 0x0000000c40000000..0x0000000c4fffffff -> 0x00000000e0000000  
-[    0.299171]  MEM 0x0000000c30000000..0x0000000c3fffffff -> 0x00000000e0000000  +[    0.315844]   IO 0x0000000ff8030000..0x0000000ff803ffff -> 0x0000000000000000 
-[    0.306387]   IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000 +[    0.322987] /pcie@ffe270000: PCICSRBAR @ 0xff000007 
-[    0.313528] /pcie@ffe260000: PCICSRBAR @ 0xff000007 +[    0.327844] setup_pci_atmu: end of DRAM 100000000 
-[    0.318382] setup_pci_atmu: end of DRAM 100000000 +[    0.332537] /pcie@ffe270000: Setup 64-bit PCI DMA window 
-[    0.323079] /pcie@ffe260000: Setup 64-bit PCI DMA window +[    0.337833] /pcie@ffe270000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo. 
-[    0.328375] /pcie@ffe260000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo. +[    0.351484] /pcie@ffe270000: DMA window size is 0xe0000000 
-[    0.342026] /pcie@ffe260000: DMA window size is 0xe0000000 +[    0.358263] platform ff6000000.qman-portal: Adding to iommu group 0 
-[    0.347754] Found FSL PCI host bridge at 0x0000000ffe270000. Firmware bus number: 0->0 +[    0.364473] platform ff6004000.qman-portal: Adding to iommu group 1 
-[    0.355591] PCI host bridge /pcie@ffe270000  ranges: +[    0.370719] platform ff6008000.qman-portal: Adding to iommu group 2 
-[    0.360547]  MEM 0x0000000c40000000..0x0000000c4fffffff -> 0x00000000e0000000  +[    0.376982] platform ff600c000.qman-portal: Adding to iommu group 3 
-[    0.367764]   IO 0x0000000ff8030000..0x0000000ff803ffff -> 0x0000000000000000 +[    0.383246] platform ff6010000.qman-portal: Adding to iommu group 4 
-[    0.374904] /pcie@ffe270000: PCICSRBAR @ 0xff000007 +[    0.389501] platform ff6014000.qman-portal: Adding to iommu group 5 
-[    0.379758] setup_pci_atmu: end of DRAM 100000000 +[    0.395755] platform ff6018000.qman-portal: Adding to iommu group 6 
-[    0.384456] /pcie@ffe270000: Setup 64-bit PCI DMA window +[    0.402019] platform ff601c000.qman-portal: Adding to iommu group 7 
-[    0.389751] /pcie@ffe270000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo. +[    0.408282] platform ff6020000.qman-portal: Adding to iommu group 8 
-[    0.403404] /pcie@ffe270000: DMA window size is 0xe0000000 +[    0.414537] platform ff6024000.qman-portal: Adding to iommu group 9 
-[    0.410762] platform ff6000000.qman-portal: Adding to iommu group 0 +[    0.420794] platform ff6028000.qman-portal: Adding to iommu group 10 
-[    0.416980] platform ff6004000.qman-portal: Adding to iommu group 1 +[    0.427143] platform ff602c000.qman-portal: Adding to iommu group 11 
-[    0.423221] platform ff6008000.qman-portal: Adding to iommu group 2 +[    0.433493] platform ff6030000.qman-portal: Adding to iommu group 12 
-[    0.429495] platform ff600c000.qman-portal: Adding to iommu group 3 +[    0.439836] platform ff6034000.qman-portal: Adding to iommu group 13 
-[    0.435748] platform ff6010000.qman-portal: Adding to iommu group 4 +[    0.446177] platform ff6038000.qman-portal: Adding to iommu group 14 
-[    0.442004] platform ff6014000.qman-portal: Adding to iommu group 5 +[    0.452527] platform ff603c000.qman-portal: Adding to iommu group 15 
-[    0.448280] platform ff6018000.qman-portal: Adding to iommu group 6 +[    0.458878] platform ff6040000.qman-portal: Adding to iommu group 16 
-[    0.454522] platform ff601c000.qman-portal: Adding to iommu group 7 +[    0.465220] platform ff6044000.qman-portal: Adding to iommu group 17 
-[    0.460777] platform ff6020000.qman-portal: Adding to iommu group 8 +[    0.471565] platform ffe114000.sdhc: Adding to iommu group 18 
-[    0.467040] platform ff6024000.qman-portal: Adding to iommu group 9 +[    0.477317] platform ffe100300.dma: Adding to iommu group 19 
-[    0.473302] platform ff6028000.qman-portal: Adding to iommu group 10 +[    0.482958] platform ffe101300.dma: Adding to iommu group 20 
-[    0.479646] platform ff602c000.qman-portal: Adding to iommu group 11 +[    0.488605] platform ffe102300.dma: Adding to iommu group 21 
-[    0.485988] platform ff6030000.qman-portal: Adding to iommu group 12 +[    0.494260] platform ffe210000.usb: Adding to iommu group 22 
-[    0.492346] platform ff6034000.qman-portal: Adding to iommu group 13 +[    0.499906] platform ffe211000.usb: Adding to iommu group 23 
-[    0.498680] platform ff6038000.qman-portal: Adding to iommu group 14 +[    0.505562] platform ffe318000.qman: Adding to iommu group 24 
-[    0.505031] platform ff603c000.qman-portal: Adding to iommu group 15 +[    0.511294] platform ffe31a000.bman: Adding to iommu group 25 
-[    0.511372] platform ff6040000.qman-portal: Adding to iommu group 16 +[    0.517030] fsl-pci ffe240000.pcie: Adding to iommu group 26 
-[    0.517730] platform ff6044000.qman-portal: Adding to iommu group 17 +[    0.522684] fsl-pci ffe250000.pcie: Adding to iommu group 27 
-[    0.524066] platform ffe114000.sdhc: Adding to iommu group 18 +[    0.528339] fsl-pci ffe260000.pcie: Adding to iommu group 28 
-[    0.529822] platform ffe100300.dma: Adding to iommu group 19 +[    0.533986] fsl-pci ffe270000.pcie: Adding to iommu group 29 
-[    0.535467] platform ffe101300.dma: Adding to iommu group 20 +[    0.549329] software IO TLB: mapped [mem 0x0000000003ff6000-0x0000000007ff6000] (64MB
-[    0.541120] platform ffe102300.dma: Adding to iommu group 21 +[    0.557171] PCI: Probing PCI hardware 
-[    0.546763] platform ffe210000.usb: Adding to iommu group 22 +[    0.560901] fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00 
-[    0.552409] platform ffe211000.usb: Adding to iommu group 23 +[    0.566996] pci_bus 0000:00: root bus resource [io  0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff]) 
-[    0.558066] platform ffe318000.qman: Adding to iommu group 24 +[    0.577870] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) 
-[    0.563802] platform ffe31a000.bman: Adding to iommu group 25 +[    0.588211] pci_bus 0000:00: root bus resource [bus 00] 
-[    0.569534] fsl-pci ffe240000.pcie: Adding to iommu group 26 +[    0.593423] pci_bus 0000:00: busn_res: [bus 00] end is updated to ff 
-[    0.575195] fsl-pci ffe250000.pcie: Adding to iommu group 27 +[    0.599805] pci 0000:00:00.0: [1957:0838] type 01 class 0x060400 
-[    0.580834] fsl-pci ffe260000.pcie: Adding to iommu group 28 +[    0.605778] pci 0000:00:00.0: reg 0x10: [io  0xdf000004-0xdf000007] 
-[    0.586489] fsl-pci ffe270000.pcie: Adding to iommu group 29 +[    0.612038] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] 
-[    0.602547] software IO TLB: No low mem +[    0.618797] pci 0000:00:00.0: supports D1 D2 
-[    0.613179] Freescale Elo series DMA driver +[    0.622983] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot 
-[    0.617491] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28 +[    0.629089] fsl-pci ffe240000.pcie: Removing from iommu group 26 
-[    0.624420fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29 +[    0.635037] pci 0000:00:00.0: Adding to iommu group 30 
-[    0.631391] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30 +[    0.642468] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
-[    0.638338] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31 +[    0.652725] pci 0000:00:00.0: PCI bridge to [bus 01-ff] 
-[    0.645289] fsl-elo-dma ffe100300.dma: #4 (fsl,eloplus-dma-channel), irq 76 +[    0.657868] pci 0000:00:00.0:   bridge window [io  0x8000080000010000-0x8000080000010fff
-[    0.652240] fsl-elo-dma ffe100300.dma: #5 (fsl,eloplus-dma-channel), irq 77 +[    0.666041] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff] 
-[    0.659206] fsl-elo-dma ffe100300.dma: #6 (fsl,eloplus-dma-channel), irq 78 +[    0.672821] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref] 
-[    0.666148] fsl-elo-dma ffe100300.dma: #7 (fsl,eloplus-dma-channel), irq 79 +[    0.680566] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 
-[    0.673553] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32 +[    0.687163] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 
-[    0.680491] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33 +[    0.693825] fsl-pci ffe250000.pcie: PCI host bridge to bus 0001:00 
-[    0.687442] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34 +[    0.699941] pci_bus 0001:00: root bus resource [io  0x8000080000021000-0x8000080000030fff] (bus address [0x0000-0xffff]) 
-[    0.694391] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35 +[    0.710811] pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc2fffffff] (bus address [0xe0000000-0xefffffff]) 
-[    0.701359] fsl-elo-dma ffe101300.dma: #4 (fsl,eloplus-dma-channel), irq 80 +[    0.721155] pci_bus 0001:00: root bus resource [bus 00] 
-[    0.708302] fsl-elo-dma ffe101300.dma: #5 (fsl,eloplus-dma-channel), irq 81 +[    0.726368] pci_bus 0001:00: busn_res: [bus 00] end is updated to ff 
-[    0.715272] fsl-elo-dma ffe101300.dma: #6 (fsl,eloplus-dma-channel), irq 82 +[    0.732737] pci 0001:00:00.0: [1957:0838] type 01 class 0x060400 
-[    0.722215] fsl-elo-dma ffe101300.dma: #7 (fsl,eloplus-dma-channel), irq 83 +[    0.738722] pci 0001:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) 
-[    0.729612] fsl-elo-dma ffe102300.dma: #0 (fsl,eloplus-dma-channel), irq 464 +[    0.746114] pci 0001:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] 
-[    0.736628] fsl-elo-dma ffe102300.dma: #1 (fsl,eloplus-dma-channel), irq 465 +[    0.752848] pci 0001:00:00.0: supports D1 D2 
-[    0.743687] fsl-elo-dma ffe102300.dma: #2 (fsl,eloplus-dma-channel), irq 466 +[    0.757058] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot 
-[    0.750720] fsl-elo-dma ffe102300.dma: #3 (fsl,eloplus-dma-channel), irq 467 +[    0.763155] fsl-pci ffe250000.pcie: Removing from iommu group 27 
-[    0.757758] fsl-elo-dma ffe102300.dma: #4 (fsl,eloplus-dma-channel), irq 468 +[    0.769097] pci 0001:00:00.0: Adding to iommu group 26 
-[    0.764794] fsl-elo-dma ffe102300.dma: #5 (fsl,eloplus-dma-channel), irq 469 +[    0.776509] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
-[    0.771857] fsl-elo-dma ffe102300.dma: #6 (fsl,eloplus-dma-channel), irq 470 +[    0.786775] pci 0001:00:00.0: PCI bridge to [bus 01-ff] 
-[    0.778884] fsl-elo-dma ffe102300.dma: #7 (fsl,eloplus-dma-channel), irq 471 +[    0.791917] pci 0001:00:00.0:   bridge window [io  0x8000080000021000-0x8000080000021fff
-[    0.786351] iommu: Default domain type: Translated +[    0.800090] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff] 
-[    0.791053] iommu: DMA domain TLB invalidation policy: strict mode +[    0.806869] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref] 
-[    0.797358] SCSI subsystem initialized +[    0.814615] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 
-[    0.801135] usbcore: registered new interface driver usbfs +[    0.821212] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01 
-[    0.806554] usbcore: registered new interface driver hub +[    0.827887] fsl-pci ffe260000.pcie: PCI host bridge to bus 0002:00 
-[    0.811871] usbcore: registered new device driver usb +[    0.833990] pci_bus 0002:00: root bus resource [io  0x8000080000032000-0x8000080000041fff] (bus address [0x0000-0xffff]) 
-[    0.816910] pps_core: LinuxPPS API ver. 1 registered +[    0.844860] pci_bus 0002:00: root bus resource [mem 0xc30000000-0xc3fffffff] (bus address [0xe0000000-0xefffffff]) 
-[    0.821834] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> +[    0.855203] pci_bus 0002:00: root bus resource [bus 00] 
-[    0.830975] PTP clock support registered +[    0.860417] pci_bus 0002:00: busn_res: [bus 00] end is updated to ff 
-[    0.834882] EDAC MC: Ver: 3.0.0 +[    0.866787] pci 0002:00:00.0: [1957:0838] type 01 class 0x060400 
-[    0.838186] fsl-ifc ffe124000.localbus: Freescale Integrated Flash Controller +[    0.872771] pci 0002:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) 
-[    0.845259] fsl-ifc ffe124000.localbus: IFC version 1.3, 8 banks +[    0.880163] pci 0002:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] 
-[    0.851974] PCI: Probing PCI hardware +[    0.886897] pci 0002:00:00.0: supports D1 D2 
-[    0.855664] fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00 +[    0.891107] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot 
-[    0.861761] pci_bus 0000:00: root bus resource [io  0xc000180000010000-0xc00018000001ffff] (bus address [0x0000-0xffff]) +[    0.897187] fsl-pci ffe260000.pcie: Removing from iommu group 28 
-[    0.872631] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) +[    0.903128] pci 0002:00:00.0: Adding to iommu group 27 
-[    0.882975] pci_bus 0000:00: root bus resource [bus 00] +[    0.910541] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
-[    0.888188] pci_bus 0000:00: busn_res: [bus 00] end is updated to ff +[    0.920813] pci 0002:00:00.0: PCI bridge to [bus 01-ff] 
-[    0.894575] pci 0000:00:00.0: [1957:0838] type 01 class 0x060400 +[    0.925956] pci 0002:00:00.0:   bridge window [io  0x8000080000032000-0x8000080000032fff
-[    0.900543] pci 0000:00:00.0: reg 0x10: [io  0xdf000004-0xdf000007] +[    0.934129] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff] 
-[    0.906803] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] +[    0.940909] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref] 
-[    0.913562] pci 0000:00:00.0: supports D1 D2 +[    0.948654] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 
-[    0.917748] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot +[    0.955251] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01 
-[    0.923888] pci 0000:00:00.0: Adding to iommu group 30 +[    0.961921] fsl-pci ffe270000.pcie: PCI host bridge to bus 0003:00 
-[    0.931308] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[    0.968029] pci_bus 0003:00: root bus resource [io  0x8000080000043000-0x8000080000052fff] (bus address [0x0000-0xffff]) 
-[    0.939392] pci 0000:00:00.0: PCI bridge to [bus 01-ff] +[    0.978899] pci_bus 0003:00: root bus resource [mem 0xc40000000-0xc4fffffff] (bus address [0xe0000000-0xefffffff]) 
-[    0.944536] pci 0000:00:00.0:   bridge window [io  0xc000180000010000-0xc000180000010fff+[    0.989242] pci_bus 0003:00: root bus resource [bus 00] 
-[    0.952710] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff] +[    0.994456] pci_bus 0003:00: busn_res: [bus 00] end is updated to ff 
-[    0.959488] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref] +[    1.000826] pci 0003:00:00.0: [1957:0838] type 01 class 0x060400 
-[    0.967235] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 +[    1.006810] pci 0003:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) 
-[    0.973830] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 +[    1.014202] pci 0003:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] 
-[    0.980511] fsl-pci ffe250000.pcie: PCI host bridge to bus 0001:00 +[    1.020937] pci 0003:00:00.0: supports D1 D2 
-[    0.986609] pci_bus 0001:00: root bus resource [io  0xc000180000030000-0xc00018000003ffff] (bus address [0x0000-0xffff]) +[    1.025146] pci 0003:00:00.0: PME# supported from D0 D1 D2 D3hot 
-[    0.997480] pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc2fffffff] (bus address [0xe0000000-0xefffffff]) +[    1.031227] fsl-pci ffe270000.pcie: Removing from iommu group 29 
-[    1.007823] pci_bus 0001:00: root bus resource [bus 00] +[    1.037168] pci 0003:00:00.0: Adding to iommu group 28 
-[    1.013035] pci_bus 0001:00: busn_res: [bus 00] end is updated to ff +[    1.044580] pci 0003:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
-[    1.019406] pci 0001:00:00.0: [1957:0838] type 01 class 0x060400 +[    1.054846] pci 0003:00:00.0: PCI bridge to [bus 01-ff] 
-[    1.025389] pci 0001:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) +[    1.059989] pci 0003:00:00.0:   bridge window [io  0x8000080000043000-0x8000080000043fff
-[    1.032782] pci 0001:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] +[    1.068162] pci 0003:00:00.0:   bridge window [mem 0x00000000-0x000fffff] 
-[    1.039518] pci 0001:00:00.0: supports D1 D2 +[    1.074941] pci 0003:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref] 
-[    1.043727] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot +[    1.082690] pci_bus 0003:01: busn_res: [bus 01-ff] end is updated to 01 
-[    1.049844] pci 0001:00:00.0: Adding to iommu group 31 +[    1.089283] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01 
-[    1.057190] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[    1.095898] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap 
-[    1.065261] pci 0001:00:00.0: PCI bridge to [bus 01-ff] +[    1.103761] pci 0000:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] 
-[    1.070405] pci 0001:00:00.0:   bridge window [io  0xc000180000030000-0xc000180000030fff+[    1.110756] pci 0000:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] 
-[    1.078579] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff] +[    1.118143] pci 0000:00:00.0: BAR 0: no space for [io  size 0x0004] 
-[    1.085357] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref] +[    1.124405] pci 0000:00:00.0: BAR 0: failed to assign [io  size 0x0004] 
-[    1.093104] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 +[    1.131019] pci 0000:00:00.0: PCI bridge to [bus 01] 
-[    1.099700] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01 +[    1.135969] pci 0000:00:00.0:   bridge window [io  0x8000080000010000-0x800008000001ffff
-[    1.106380] fsl-pci ffe260000.pcie: PCI host bridge to bus 0002:00 +[    1.144138] pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff] 
-[    1.112477] pci_bus 0002:00: root bus resource [io  0xc000180000050000-0xc00018000005ffff] (bus address [0x0000-0xffff]) +[    1.151098] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc 
-[    1.123349] pci_bus 0002:00: root bus resource [mem 0xc30000000-0xc3fffffff] (bus address [0xe0000000-0xefffffff]) +[    1.160132] pci_bus 0000:00: resource 4 [io  0x8000080000010000-0x800008000001ffff
-[    1.133693] pci_bus 0002:00: root bus resource [bus 00] +[    1.167785] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff] 
-[    1.138905] pci_bus 0002:00: busn_res: [bus 00] end is updated to ff +[    1.174215] pci_bus 0000:01: resource 0 [io  0x8000080000010000-0x800008000001ffff
-[    1.145275] pci 0002:00:00.0: [1957:0838] type 01 class 0x060400 +[    1.181868] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff] 
-[    1.151259] pci 0002:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) +[    1.188301] pci 0001:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] 
-[    1.158652] pci 0002:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] +[    1.195343] pci 0001:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] 
-[    1.165387] pci 0002:00:00.0: supports D1 D2 +[    1.202730] pci 0001:00:00.0: PCI bridge to [bus 01] 
-[    1.169596] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot +[    1.207688] pci 0001:00:00.0:   bridge window [io  0x8000080000021000-0x8000080000030fff
-[    1.175721] pci 0002:00:00.0: Adding to iommu group 32 +[    1.215858] pci 0001:00:00.0:   bridge window [mem 0xc20000000-0xc2fffffff] 
-[    1.183068] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[    1.222817] pci_bus 0001:00: resource 4 [io  0x8000080000021000-0x8000080000030fff
-[    1.191139] pci 0002:00:00.0: PCI bridge to [bus 01-ff] +[    1.230461] pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc2fffffff] 
-[    1.196283] pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc000180000050fff+[    1.236897] pci_bus 0001:01: resource 0 [io  0x8000080000021000-0x8000080000030fff
-[    1.204461] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff] +[    1.244544] pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc2fffffff] 
-[    1.211235] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref] +[    1.250983] pci 0002:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] 
-[    1.218982] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 +[    1.258018] pci 0002:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] 
-[    1.225577] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01 +[    1.265412] pci 0002:00:00.0: PCI bridge to [bus 01] 
-[    1.232258] fsl-pci ffe270000.pcie: PCI host bridge to bus 0003:00 +[    1.270365] pci 0002:00:00.0:   bridge window [io  0x8000080000032000-0x8000080000041fff
-[    1.238356] pci_bus 0003:00: root bus resource [io  0xc000180000070000-0xc00018000007ffff] (bus address [0x0000-0xffff]) +[    1.278539] pci 0002:00:00.0:   bridge window [mem 0xc30000000-0xc3fffffff] 
-[    1.249227] pci_bus 0003:00: root bus resource [mem 0xc40000000-0xc4fffffff] (bus address [0xe0000000-0xefffffff]) +[    1.285493] pci_bus 0002:00: resource 4 [io  0x8000080000032000-0x8000080000041fff
-[    1.259570] pci_bus 0003:00: root bus resource [bus 00] +[    1.293143] pci_bus 0002:00: resource 5 [mem 0xc30000000-0xc3fffffff] 
-[    1.264782] pci_bus 0003:00: busn_res: [bus 00] end is updated to ff +[    1.299573] pci_bus 0002:01: resource 0 [io  0x8000080000032000-0x8000080000041fff
-[    1.271154] pci 0003:00:00.0: [1957:0838] type 01 class 0x060400 +[    1.307226] pci_bus 0002:01: resource 1 [mem 0xc30000000-0xc3fffffff] 
-[    1.277136] pci 0003:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) +[    1.313659] pci 0003:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] 
-[    1.284530] pci 0003:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref] +[    1.320701] pci 0003:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] 
-[    1.291266] pci 0003:00:00.0: supports D1 D2 +[    1.328087] pci 0003:00:00.0: PCI bridge to [bus 01] 
-[    1.295474] pci 0003:00:00.0: PME# supported from D0 D1 D2 D3hot +[    1.333050] pci 0003:00:00.0:   bridge window [io  0x8000080000043000-0x8000080000052fff
-[    1.301598] pci 0003:00:00.0: Adding to iommu group 33 +[    1.341215] pci 0003:00:00.0:   bridge window [mem 0xc40000000-0xc4fffffff] 
-[    1.308940] pci 0003:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring +[    1.348175] pci_bus 0003:00: resource 4 [io  0x8000080000043000-0x8000080000052fff
-[    1.317020] pci 0003:00:00.0: PCI bridge to [bus 01-ff] +[    1.355819] pci_bus 0003:00: resource 5 [mem 0xc40000000-0xc4fffffff] 
-[    1.322164] pci 0003:00:00.0:   bridge window [io  0xc000180000070000-0xc000180000070fff+[    1.362255] pci_bus 0003:01: resource 0 [io  0x8000080000043000-0x8000080000052fff
-[    1.330338] pci 0003:00:00.0:   bridge window [mem 0x00000000-0x000fffff] +[    1.369902] pci_bus 0003:01: resource 1 [mem 0xc40000000-0xc4fffffff] 
-[    1.337116] pci 0003:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref] +[    1.382991] Freescale Elo series DMA driver 
-[    1.344863] pci_bus 0003:01: busn_res: [bus 01-ff] end is updated to 01 +[    1.387291] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28 
-[    1.351459] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01 +[    1.394231] fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29 
-[    1.358074] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap +[    1.401165] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30 
-[    1.365939] pci 0000:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] +[    1.408133] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31 
-[    1.372933] pci 0000:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] +[    1.415074] fsl-elo-dma ffe100300.dma: #4 (fsl,eloplus-dma-channel), irq 76 
-[    1.380319] pci 0000:00:00.0: BAR 0: no space for [io  size 0x0004] +[    1.422033] fsl-elo-dma ffe100300.dma: #5 (fsl,eloplus-dma-channel), irq 77 
-[    1.386581] pci 0000:00:00.0: BAR 0: failed to assign [io  size 0x0004] +[    1.428983] fsl-elo-dma ffe100300.dma: #6 (fsl,eloplus-dma-channel), irq 78 
-[    1.393186] pci 0000:00:00.0: PCI bridge to [bus 01] +[    1.435950] fsl-elo-dma ffe100300.dma: #7 (fsl,eloplus-dma-channel), irq 79 
-[    1.398145] pci 0000:00:00.0:   bridge window [io  0xc000180000010000-0xc00018000001ffff+[    1.443285] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32 
-[    1.406313] pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff] +[    1.450218] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33 
-[    1.413273] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc +[    1.457158] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34 
-[    1.422307] pci_bus 0000:00: resource 4 [io  0xc000180000010000-0xc00018000001ffff+[    1.464118] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35 
-[    1.429965] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff] +[    1.471068] fsl-elo-dma ffe101300.dma: #4 (fsl,eloplus-dma-channel), irq 80 
-[    1.436389] pci_bus 0000:01: resource 0 [io  0xc000180000010000-0xc00018000001ffff+[    1.478035] fsl-elo-dma ffe101300.dma: #5 (fsl,eloplus-dma-channel), irq 81 
-[    1.444044] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff] +[    1.484977] fsl-elo-dma ffe101300.dma: #6 (fsl,eloplus-dma-channel), irq 82 
-[    1.450477] pci 0001:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] +[    1.491937] fsl-elo-dma ffe101300.dma: #7 (fsl,eloplus-dma-channel), irq 83 
-[    1.457519] pci 0001:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] +[    1.499300] fsl-elo-dma ffe102300.dma: #0 (fsl,eloplus-dma-channel), irq 464 
-[    1.464904] pci 0001:00:00.0: PCI bridge to [bus 01] +[    1.506311] fsl-elo-dma ffe102300.dma: #1 (fsl,eloplus-dma-channel), irq 465 
-[    1.469864] pci 0001:00:00.0:   bridge window [io  0xc000180000030000-0xc00018000003ffff+[    1.513354] fsl-elo-dma ffe102300.dma: #2 (fsl,eloplus-dma-channel), irq 466 
-[    1.478033] pci 0001:00:00.0:   bridge window [mem 0xc20000000-0xc2fffffff] +[    1.520393] fsl-elo-dma ffe102300.dma: #3 (fsl,eloplus-dma-channel), irq 467 
-[    1.484993] pci_bus 0001:00: resource 4 [io  0xc000180000030000-0xc00018000003ffff+[    1.527430] fsl-elo-dma ffe102300.dma: #4 (fsl,eloplus-dma-channel), irq 471 
-[    1.492636] pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc2fffffff] +[    1.534477] fsl-elo-dma ffe102300.dma: #5 (fsl,eloplus-dma-channel), irq 472 
-[    1.499073] pci_bus 0001:01: resource 0 [io  0xc000180000030000-0xc00018000003ffff+[    1.541522] fsl-elo-dma ffe102300.dma: #6 (fsl,eloplus-dma-channel), irq 473 
-[    1.506718] pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc2fffffff] +[    1.548564] fsl-elo-dma ffe102300.dma: #7 (fsl,eloplus-dma-channel), irq 474 
-[    1.513159] pci 0002:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] +[    1.555987] iommu: Default domain type: Translated  
-[    1.520194] pci 0002:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] +[    1.560780] iommu: DMA domain TLB invalidation policy: strict mode  
-[    1.527588] pci 0002:00:00.0: PCI bridge to [bus 01] +[    1.567166] SCSI subsystem initialized 
-[    1.532539] pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff+[    1.570936] usbcore: registered new interface driver usbfs 
-[    1.540719] pci 0002:00:00.0:   bridge window [mem 0xc30000000-0xc3fffffff] +[    1.576353] usbcore: registered new interface driver hub 
-[    1.547668] pci_bus 0002:00: resource 4 [io  0xc000180000050000-0xc00018000005ffff+[    1.581659] usbcore: registered new device driver usb 
-[    1.555319] pci_bus 0002:00: resource 5 [mem 0xc30000000-0xc3fffffff] +[    1.586708] pps_core: LinuxPPS API ver. 1 registered 
-[    1.561748] pci_bus 0002:01: resource 0 [io  0xc000180000050000-0xc00018000005ffff+[    1.591633] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 
-[    1.569402] pci_bus 0002:01: resource 1 [mem 0xc30000000-0xc3fffffff] +[    1.600782] PTP clock support registered 
-[    1.575834] pci 0003:00:00.0: BAR 6: no space for [mem size 0x01000000 pref] +[    1.604684] EDAC MC: Ver: 3.0.0 
-[    1.582877] pci 0003:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref] +[    1.608003] fsl-ifc ffe124000.localbus: Freescale Integrated Flash Controller 
-[    1.590263] pci 0003:00:00.0: PCI bridge to [bus 01] +[    1.615073] fsl-ifc ffe124000.localbus: IFC version 1.3, 8 banks 
-[    1.595223] pci 0003:00:00.0:   bridge window [io  0xc000180000070000-0xc00018000007ffff+[    1.621882] clocksource: Switched to clocksource timebase 
-[    1.603391] pci 0003:00:00.0:   bridge window [mem 0xc40000000-0xc4fffffff] +[    1.629666] NET: Registered PF_INET protocol family 
-[    1.610350] pci_bus 0003:00: resource 4 [io  0xc000180000070000-0xc00018000007ffff+[    1.634632] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) 
-[    1.617993] pci_bus 0003:00: resource 5 [mem 0xc40000000-0xc4fffffff] +[    1.643587] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) 
-[    1.624431] pci_bus 0003:01: resource 0 [io  0xc000180000070000-0xc00018000007ffff+[    1.652063] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
-[    1.632077] pci_bus 0003:01: resource 1 [mem 0xc40000000-0xc4fffffff] +[    1.659779] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) 
-[    1.639085] clocksource: Switched to clocksource timebase +[    1.667826] TCP bind hash table entries: 32768 (order: 7524288 bytes, linear) 
-[    1.648910] NET: Registered PF_INET protocol family +[    1.675299] TCP: Hash tables configured (established 32768 bind 32768) 
-[    1.653876] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) +[    1.681837] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) 
-[    1.664008] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) +[    1.688507] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) 
-[    1.672477] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) +[    1.695767] NET: Registered PF_UNIX/PF_LOCAL protocol family 
-[    1.680198] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) +[    1.701394] PCI: CLS 0 bytes, default 64 
-[    1.688217] TCP bind hash table entries: 32768 (order: 81048576 bytes, linear) +[    1.706335] workingset: timestamp_bits=46 max_order=20 bucket_order=0 
-[    1.696030] TCP: Hash tables configured (established 32768 bind 32768) +[    1.717517] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
-[    1.702602] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) +[    1.723288] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
-[    1.709272] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) +[    1.753593] bman_portal ff4000000.bman-portal: Portal initialised, cpu 0 
-[    1.716715] NET: Registered PF_UNIX/PF_LOCAL protocol family +[    1.760398] bman_portal ff4004000.bman-portal: Portal initialised, cpu 1 
-[    1.722358] PCI: CLS 0 bytes, default 64 +[    1.767233] bman_portal ff4008000.bman-portal: Portal initialised, cpu 2 
-[    1.727422] workingset: timestamp_bits=46 max_order=20 bucket_order=0 +[    1.774020] bman_portal ff400c000.bman-portal: Portal initialised, cpu 3 
-[    1.738793] squashfs: version 4.0 (2009/01/31) Phillip Lougher +[    1.780771] bman_portal ff4010000.bman-portal: Portal initialised, cpu 4 
-[    1.744592] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. +[    1.787581] bman_portal ff4014000.bman-portal: Portal initialised, cpu 5 
-[    1.777789] bman_portal ff4000000.bman-portal: Portal initialised, cpu 0 +[    1.794403] bman_portal ff4018000.bman-portal: Portal initialised, cpu 6 
-[    1.784696] bman_portal ff4004000.bman-portal: Portal initialised, cpu 1 +[    1.801181] bman_portal ff401c000.bman-portal: Portal initialised, cpu 7 
-[    1.791581] bman_portal ff4008000.bman-portal: Portal initialised, cpu 2 +[    1.808727] qman_portal ff6000000.qman-portal: Portal initialised, cpu 0 
-[    1.798445] bman_portal ff400c000.bman-portal: Portal initialised, cpu 3 +[    1.815457] qman_portal ff6004000.qman-portal: Portal initialised, cpu 1 
-[    1.805314] bman_portal ff4010000.bman-portal: Portal initialised, cpu 4 +[    1.822161] qman_portal ff6008000.qman-portal: Portal initialised, cpu 2 
-[    1.812213] bman_portal ff4014000.bman-portal: Portal initialised, cpu 5 +[    1.828853] qman_portal ff600c000.qman-portal: Portal initialised, cpu 3 
-[    1.819061] bman_portal ff4018000.bman-portal: Portal initialised, cpu 6 +[    1.835574] qman_portal ff6010000.qman-portal: Portal initialised, cpu 4 
-[    1.825956] bman_portal ff401c000.bman-portal: Portal initialised, cpu 7 +[    1.842283] qman_portal ff6014000.qman-portal: Portal initialised, cpu 5 
-[    1.833849] qman_portal ff6000000.qman-portal: Portal initialised, cpu 0 +[    1.848988] qman_portal ff6018000.qman-portal: Portal initialised, cpu 6 
-[    1.840603] qman_portal ff6004000.qman-portal: Portal initialised, cpu 1 +[    1.855840] qman_portal ff601c000.qman-portal: Portal initialised, cpu 7 
-[    1.847343] qman_portal ff6008000.qman-portal: Portal initialised, cpu 2 +[    1.863172] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 
-[    1.854081] qman_portal ff600c000.qman-portal: Portal initialised, cpu 3 +[    1.870133] printk: console [ttyS0] disabled 
-[    1.860823] qman_portal ff6010000.qman-portal: Portal initialised, cpu 4 +[    1.874354] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 18750000) is a 16550A 
-[    1.867549] qman_portal ff6014000.qman-portal: Portal initialised, cpu 5 +[    1.883123] printk: console [ttyS0] enabled 
-[    1.874299] qman_portal ff6018000.qman-portal: Portal initialised, cpu 6 +[    1.883123] printk: console [ttyS0] enabled 
-[    1.881171] qman_portal ff601c000.qman-portal: Portal initialised, cpu 7 +[    1.891445] printk: bootconsole [udbg0] disabled 
-[    1.888805] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled +[    1.891445] printk: bootconsole [udbg0] disabled 
-[    1.896164] printk: console [ttyS0] disabled +[    1.900880] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 18750000) is a 16550A 
-[    1.900603] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 18750000) is a 16550A +[    1.909885] serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 18750000) is a 16550A 
-[    1.909333] printk: console [ttyS0] enabled +[    1.918889] serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 18750000) is a 16550A 
-[    1.909333] printk: console [ttyS0] enabled +[    1.930674] loop: module loaded 
-[    1.917655] printk: bootconsole [udbg0] disabled +[    1.934257] physmap-flash fefc00000.nor: physmap platform flash device: [mem 0xfefc00000-0xfefffffff] 
-[    1.917655] printk: bootconsole [udbg0] disabled +[    1.943563] fefc00000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00 
-[    1.927337] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 18750000) is a 16550A +[    1.953669] Amd/Fujitsu Extended Query Table at 0x0040 
-[    1.936509] serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 18750000) is a 16550A +[    1.958822]   Amd/Fujitsu Extended Query version 1.3. 
-[    1.945762] serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 18750000) is a 16550A +[    1.963881] number of CFI chips: 1 
-[    1.958341] loop: module loaded +[    1.974856] 11 fixed-partitions partitions found on MTD device fefc00000.nor 
-[    1.961915] physmap-flash fefc00000.nor: physmap platform flash device: [mem 0xfefc00000-0xfefffffff] +[    1.981921] Creating 11 MTD partitions on "fefc00000.nor": 
-[    1.971220] fefc00000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00 +[    1.987408] 0x000000000000-0x000000010000 : "qoriq-rcw" 
-[    1.981333] Amd/Fujitsu Extended Query Table at 0x0040 +[    1.992958] ftl_cs: FTL header not found. 
-[    1.986487]   Amd/Fujitsu Extended Query version 1.3. +[    1.997063] 0x000000010000-0x000000030000 : "wg_cfg0" 
-[    1.991544] number of CFI chips: 1 +[    2.002278] ftl_cs: FTL header not found. 
-[    2.003484] 11 fixed-partitions partitions found on MTD device fefc00000.nor +[    2.006348] 0x000000030000-0x000000040000 : "wg_cfg1" 
-[    2.010550] Creating 11 MTD partitions on "fefc00000.nor": +[    2.011517] ftl_cs: FTL header not found. 
-[    2.016038] 0x000000000000-0x000000010000 : "qoriq-rcw" +[    2.015584] 0x000000040000-0x000000050000 : "wg_mfg_data" 
-[    2.021604] ftl_cs: FTL header not found. +[    2.021110] ftl_cs: FTL header not found. 
-[    2.025740] 0x000000010000-0x000000030000 : "wg_cfg0" +[    2.025179] 0x000000050000-0x000000100000 : "wg_bootopt_data_and_reserved" 
-[    2.030958] ftl_cs: FTL header not found. +[    2.032392] ftl_cs: FTL header not found. 
-[    2.035063] 0x000000030000-0x000000040000 : "wg_cfg1" +[    2.036457] 0x000000100000-0x0000001b0000 : "wg_extra_reserved_1" 
-[    2.040264] ftl_cs: FTL header not found. +[    2.042906] ftl_cs: FTL header not found. 
-[    2.044361] 0x000000040000-0x000000050000 : "wg_mfg_data" +[    2.046991] 0x0000001b0000-0x000000260000 : "wg_extra_reserved_2" 
-[    2.049919] ftl_cs: FTL header not found. +[    2.053433] ftl_cs: FTL header not found. 
-[    2.054017] 0x000000050000-0x000000100000 : "wg_bootopt_data_and_reserved" +[    2.057526] 0x000000260000-0x000000320000 : "wg_u-boot_failsafe" 
-[    2.061249] ftl_cs: FTL header not found. +[    2.063907] ftl_cs: FTL header not found. 
-[    2.065352] 0x000000100000-0x0000001b0000 : "wg_extra_reserved_1" +[    2.067983] 0x000000320000-0x000000330000 : "qoriq-fman" 
-[    2.071822] ftl_cs: FTL header not found. +[    2.073586] ftl_cs: FTL header not found. 
-[    2.075919] 0x0000001b0000-0x000000260000 : "wg_extra_reserved_2" +[    2.077709] 0x000000330000-0x000000340000 : "u-boot-env" 
-[    2.082368] ftl_cs: FTL header not found. +[    2.083169] ftl_cs: FTL header not found. 
-[    2.086466] 0x000000260000-0x000000320000 : "wg_u-boot_failsafe" +[    2.087244] 0x000000340000-0x000000400000 : "u-boot" 
-[    2.092859] ftl_cs: FTL header not found. +[    2.092575] ftl_cs: FTL header not found. 
-[    2.096970] 0x000000320000-0x000000330000 : "qoriq-fman" +[    2.099554] fsl_espi ffe110000.spi: irq = 53 
-[    2.102435] ftl_cs: FTL header not found. +[    2.115109] hwmon hwmon0: temp1_input not attached to any thermal zone 
-[    2.106540] 0x000000330000-0x000000340000 : "u-boot-env" +[    2.125640] hwmon hwmon1: temp1_input not attached to any thermal zone 
-[    2.111993] ftl_cs: FTL header not found. +[    2.136121] hwmon hwmon2: temp1_input not attached to any thermal zone 
-[    2.116089] 0x000000340000-0x000000400000 : "u-boot" +[    2.146558] hwmon hwmon3: temp1_input not attached to any thermal zone 
-[    2.121445] ftl_cs: FTL header not found. +[    2.153705] mv88e6085 0x0000000ffe4fc000:10: switch 0x1710 detected: Marvell 88E6171, revision 2 
-[    2.129037] fsl_espi ffe110000.spi: irq = 53 +[    2.241844] fsl_dpaa_mac ffe4f2000.ethernet: FMan MEMAC 
-[    2.148212] hwmon hwmon0: temp1_input not attached to any thermal zone +[    2.247099] fsl_dpaa_mac ffe4f2000.ethernet: FMan MAC address: <redacted>6 
-[    2.159754] hwmon hwmon1: temp1_input not attached to any thermal zone +[    2.254759] fsl_dpaa_mac ffe4e0000.ethernet: FMan MEMAC 
-[    2.171241] hwmon hwmon2: temp1_input not attached to any thermal zone +[    2.259987] fsl_dpaa_mac ffe4e0000.ethernet: FMan MAC address: <redacted>7 
-[    2.182615] hwmon hwmon3: temp1_input not attached to any thermal zone +[    2.267660] fsl_dpaa_mac ffe4e2000.ethernet: FMan MEMAC 
-[    2.190291] mv88e6085 0x0000000ffe4fc000:10: switch 0x1710 detected: Marvell 88E6171, revision 2 +[    2.272893] fsl_dpaa_mac ffe4e2000.ethernet: FMan MAC address: <redacted>8 
-[    2.240281] fsl_dpaa_mac ffe4f2000.ethernet: FMan MEMAC +[    2.284310] fsl_dpaa_mac ffe4e4000.ethernet: FMan MEMAC 
-[    2.245521] fsl_dpaa_mac ffe4f2000.ethernet: FMan MAC address: <redacted>  +[    2.289542] fsl_dpaa_mac ffe4e4000.ethernet: FMan MAC address: <redacted>9 
-[    2.253164] fsl_dpaa_mac ffe4e0000.ethernet: FMan MEMAC +[    2.300633] fsl_dpaa_mac ffe4e6000.ethernet: FMan MEMAC 
-[    2.258391] fsl_dpaa_mac ffe4e0000.ethernet: FMan MAC address: <redacted>  +[    2.305873] fsl_dpaa_mac ffe4e6000.ethernet: FMan MAC address: <redacted>a 
-[    2.265999] fsl_dpaa_mac ffe4e2000.ethernet: FMan MEMAC +[    2.319106] fsl_dpaa_mac ffe4f2000.ethernet eth0: Probed interface eth0 
-[    2.271230] fsl_dpaa_mac ffe4e2000.ethernet: FMan MAC address: <redacted>  +[    2.331662] fsl_dpaa_mac ffe4e0000.ethernet eth1: Probed interface eth1 
-[    2.278828] fsl_dpaa_mac ffe4e4000.ethernet: FMan MEMAC +[    2.344027] fsl_dpaa_mac ffe4e2000.ethernet eth2: Probed interface eth2 
-[    2.284060] fsl_dpaa_mac ffe4e4000.ethernet: FMan MAC address: <redacted>  +[    2.356573] fsl_dpaa_mac ffe4e4000.ethernet eth3: Probed interface eth3 
-[    2.291670] fsl_dpaa_mac ffe4e6000.ethernet: FMan MEMAC +[    2.369145] fsl_dpaa_mac ffe4e6000.ethernet eth4: Probed interface eth4 
-[    2.296896] fsl_dpaa_mac ffe4e6000.ethernet: FMan MAC address: <redacted>  +[    2.375837ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
-[    2.310714] fsl_dpaa_mac ffe4f2000.ethernet eth0: Probed interface eth0 +[    2.382973] fsl-ehci: Freescale EHCI Host controller driver 
-[    2.323706] fsl_dpaa_mac ffe4e0000.ethernet eth1: Probed interface eth1 +[    2.388624] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller 
-[    2.336722] fsl_dpaa_mac ffe4e2000.ethernet eth2: Probed interface eth2 +[    2.395256] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 
-[    2.349706] fsl_dpaa_mac ffe4e4000.ethernet eth3: Probed interface eth3 +[    2.412406] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000 
-[    2.362769] fsl_dpaa_mac ffe4e6000.ethernet eth4: Probed interface eth4 +[    2.441888] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 
-[    2.369822platform fsl-ehci.0: Adding to iommu group 34 +[    2.447838] hub 1-0:1.0: USB hub found 
-[    2.375379platform fsl-ehci.1Adding to iommu group 35 +[    2.451609] hub 1-0:1.0: 1 port detected 
-[    2.381145] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller +[    2.455807] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller 
-[    2.387772] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 +[    2.462446] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 
-[    2.404924] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000 +[    2.479583] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000 
-[    2.449080] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 +[    2.511888] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 
-[    2.455066] hub 1-0:1.0: USB hub found +[    2.517828] hub 2-0:1.0: USB hub found 
-[    2.458850] hub 1-0:1.0: 1 port detected +[    2.521597] hub 2-0:1.0: 1 port detected 
-[    2.463177] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller +[    2.526065] usbcore: registered new interface driver uas 
-[    2.469929] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 +[    2.531437] usbcore: registered new interface driver usb-storage 
-[    2.487080] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000 +[    2.538025] mpc-i2c ffe118000.i2c: timeout 1000000 us 
-[    2.519097] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 +[    2.543462] mpc-i2c ffe118100.i2c: timeout 1000000 us 
-[    2.525138] hub 2-0:1.0: USB hub found +[    2.548634] mpc-i2c ffe119000.i2c: timeout 1000000 us 
-[    2.528915] hub 2-0:1.0: 1 port detected +[    2.553798] mpc-i2c ffe119100.i2c: timeout 1000000 us 
-[    2.533238] usbcore: registered new interface driver uas +[    2.559256] ptp_qoriq: device tree node missing required elements, try automatic configuration 
-[    2.538612] usbcore: registered new interface driver usb-storage +[    2.567950] pps pps0: new PPS source ptp0 
-[    2.545379] mpc-i2c ffe118000.i2c: timeout 1000000 us +[    2.572287] booke_wdt: powerpc book-e watchdog driver loaded 
-[    2.550923] mpc-i2c ffe118100.i2c: timeout 1000000 us +[    2.578032] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software 
-[    2.556145] mpc-i2c ffe119000.i2c: timeout 1000000 us +[    2.585429] EDAC MC0: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) 
-[    2.561328] mpc-i2c ffe119100.i2c: timeout 1000000 us +[    2.595643] fsl_ddr_edac acquired irq 490 for MC 
-[    2.566808] ptp_qoriq: device tree node missing required elements, try automatic configuration +[    2.600259] fsl_ddr_edac MC err registered 
-[    2.575546] pps pps0: new PPS source ptp0 +[    2.605765] EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT) 
-[    2.579929] booke_wdt: powerpc book-e watchdog driver loaded +[    2.617633] MPC85xx_edac acquired irq 20 for PCI Err 
-[    2.585689] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software +[    2.622603] MPC85xx_edac PCI err registered 
-[    2.593039] EDAC MC0: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) +[    2.626832] EDAC PCI1: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.1.auto (INTERRUPT) 
-[    2.603286] fsl_ddr_edac acquired irq 490 for MC +[    2.638689] MPC85xx_edac acquired irq 21 for PCI Err 
-[    2.607904] fsl_ddr_edac MC err registered +[    2.643658] MPC85xx_edac PCI err registered 
-[    2.613127] EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT) +[    2.647885] EDAC PCI2: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.2.auto (INTERRUPT) 
-[    2.625007] MPC85xx_edac acquired irq 20 for PCI Err +[    2.659741] MPC85xx_edac acquired irq 22 for PCI Err 
-[    2.629986] MPC85xx_edac PCI err registered +[    2.664710] MPC85xx_edac PCI err registered 
-[    2.634231] EDAC PCI1: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.1.auto (INTERRUPT) +[    2.668949] EDAC PCI3: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.3.auto (INTERRUPT) 
-[    2.646094] MPC85xx_edac acquired irq 21 for PCI Err +[    2.680812] MPC85xx_edac acquired irq 23 for PCI Err 
-[    2.651067] MPC85xx_edac PCI err registered +[    2.685781] MPC85xx_edac PCI err registered 
-[    2.655299] EDAC PCI2: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.2.auto (INTERRUPT) +[    2.690342] qoriq-cpufreq qoriq-cpufreq: Disabling due to erratum A-008083 
-[    2.667157] MPC85xx_edac acquired irq 22 for PCI Err +[    2.697531] sdhci: Secure Digital Host Controller Interface driver 
-[    2.672125] MPC85xx_edac PCI err registered +[    2.703718] sdhci: Copyright(c) Pierre Ossman 
-[    2.676362] EDAC PCI3: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.3.auto (INTERRUPT) +[    2.708074] sdhci-pltfm: SDHCI platform and OF driver helper 
-[    2.688231] MPC85xx_edac acquired irq 23 for PCI Err +[    2.714817] caam ffe300000.crypto: Linux CAAM Queue I/F driver initialised 
-[    2.693200] MPC85xx_edac PCI err registered +[    2.721707] caam ffe300000.crypto: Entropy delay = 3200 
-[    2.697783] qoriq-cpufreq qoriq-cpufreq: Disabling due to erratum A-008083 +[    2.753681] caam ffe300000.crypto: Instantiated RNG4 SH0 
-[    2.704996] sdhci: Secure Digital Host Controller Interface driver +[    2.780416] caam ffe300000.crypto: Instantiated RNG4 SH1 
-[    2.711184] sdhci: Copyright(c) Pierre Ossman +[    2.785736] caam ffe300000.crypto: device ID = 0x0a13020000000000 (Era 6) 
-[    2.715539] sdhci-pltfm: SDHCI platform and OF driver helper +[    2.792533] caam ffe300000.crypto: job rings = 4, qi = 1 
-[    2.722385] caam ffe300000.crypto: Linux CAAM Queue I/F driver initialised +[    2.797966] platform ffe301000.jr: Adding to iommu group 29 
-[    2.729274] caam ffe300000.crypto: Entropy delay = 3200 +[    2.803797] platform ffe302000.jr: Adding to iommu group 31 
-[    2.739997] caam ffe300000.crypto: Instantiated RNG4 SH0 +[    2.809574] platform ffe303000.jr: Adding to iommu group 32 
-[    2.745488] caam ffe300000.crypto: Instantiated RNG4 SH1 +[    2.815359] platform ffe304000.jr: Adding to iommu group 33 
-[    2.750806] caam ffe300000.crypto: device ID = 0x0a13020000000000 (Era 6) +[    2.825696] caam algorithms registered in /proc/crypto 
-[    2.757598] caam ffe300000.crypto: job rings = 4, qi = 1 +[    2.831830] caam ffe300000.crypto: caam pkc algorithms registered in /proc/crypto 
-[    2.763012] platform ffe301000.jr: Adding to iommu group 36 +[    2.839335] caam ffe300000.crypto: registering rng-caam 
-[    2.768789] platform ffe302000.jr: Adding to iommu group 37 +[    2.844414] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA 64-bit 
-[    2.774539] platform ffe303000.jr: Adding to iommu group 38 +[    2.847693] caam ffe300000.crypto: algorithms registered in /proc/crypto 
-[    2.780298] platform ffe304000.jr: Adding to iommu group 39 +[    2.860687] NET: Registered PF_INET6 protocol family 
-[    2.786947] caam algorithms registered in /proc/crypto +[    2.866556] Segment Routing with IPv6 
-[    2.792185] caam ffe300000.crypto: caam pkc algorithms registered in /proc/crypto +[    2.870243] In-situ OAM (IOAM) with IPv6 
-[    2.799678] caam ffe300000.crypto: registering rng-caam +[    2.874219] NET: Registered PF_PACKET protocol family 
-[    2.805004] caam ffe300000.crypto: rng crypto API alg registered prng-caam +[    2.879357] 8021q: 802.1Q VLAN Support v1.8 
-[    2.809085] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA 64-bit +[    2.883603] drmem: No dynamic reconfiguration memory found 
-[    2.810430] random: crng init done +[    2.891032] mv88e6085 0x0000000ffe4fc000:10: switch 0x1710 detected: Marvell 88E6171, revision 2 
-[    2.812437] caam ffe300000.crypto: algorithms registered in /proc/crypto +[    2.907077] mmc0: new high speed SDHC card at address 59b4 
-[    2.831086] NET: Registered PF_INET6 protocol family +[    2.912864] mmcblk0: mmc0:59b4 SDC   7.34 GiB  
-[    2.836767] Segment Routing with IPv6 +[    2.918324]  mmcblk0: p1 p2 
-[    2.840451] In-situ OAM (IOAM) with IPv6 +[    2.924860randomcrng init done 
-[    2.844415] NET: Registered PF_PACKET protocol family +[    3.651212] mv88e6085 0x0000000ffe4fc000:10: configuring for fixed/rgmii-id link mode 
-[    2.849546] 8021q: 802.1Q VLAN Support v1.8 +[    3.667201] mv88e6085 0x0000000ffe4fc000:10: Link is Up - 1Gbps/Full - flow control off 
-[    2.853346] mmc0: new high speed SDHC card at address 59b4 +[    3.676024] mv88e6085 0x0000000ffe4fc000:10 sweth3 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:00] driver ) 
-[    2.853799] drmem: No dynamic reconfiguration memory found +[    3.702118] mv88e6085 0x0000000ffe4fc000:10 sweth4 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:01] driver ) 
-[    2.859534] mmcblk0: mmc0:59b4 SDC   7.34 GiB +[    3.725520] mv88e6085 0x0000000ffe4fc000:10 sweth5 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:02] driver ) 
-[    2.870554]  mmcblk0: p1 p2 +[    3.746789] mv88e6085 0x0000000ffe4fc000:10 sweth6 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:03] driver ) 
-[    2.876592mv88e6085 0x0000000ffe4fc000:10switch 0x1710 detected: Marvell 88E6171, revision 2 +[    3.768054] mv88e6085 0x0000000ffe4fc000:10 sweth7 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:04] driver ) 
-[    3.471533] mv88e6085 0x0000000ffe4fc000:10: configuring for fixed/rgmii-id link mode +[    3.783736] DSA: tree 0 setup 
-[    3.486630] mv88e6085 0x0000000ffe4fc000:10 sweth3 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:00] driver ) +[    3.787280] clk: Disabling unused clocks 
-[    3.501082] mv88e6085 0x0000000ffe4fc000:10: nonfatal error -34 setting MTU to 1500 on port 0 +[    3.797669] Freeing unused kernel image (initmem) memory: 19576K 
-[    3.518024] mv88e6085 0x0000000ffe4fc000:10 sweth4 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:01] driver ) +[    3.803752] This architecture does not have kernel memory protection. 
-[    3.532475] mv88e6085 0x0000000ffe4fc000:10: nonfatal error -34 setting MTU to 1500 on port 1 +[    3.810202] Run /init as init process 
-[    3.548239] mv88e6085 0x0000000ffe4fc000:10 sweth5 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:02] driver ) +[    4.013596] init: Console is alive 
-[    3.562689] mv88e6085 0x0000000ffe4fc000:10: nonfatal error -34 setting MTU to 1500 on port 2 +[    4.017118] init: - watchdog - 
-[    3.578797] mv88e6085 0x0000000ffe4fc000:10 sweth6 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:03] driver ) +[    4.023952] kmodloader: loading kernel modules from /etc/modules-boot.d/
-[    3.593251] mv88e6085 0x0000000ffe4fc000:10: nonfatal error -34 setting MTU to 1500 on port 3 +[    4.041782] tpm tpm0: starting up the TPM manually 
-[    3.609349] mv88e6085 0x0000000ffe4fc000:10 sweth7 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:04] driver ) +[    4.123687] rtc-rs5c372 0-0032: rs5c372a found, 24hr 
-[    3.623798] mv88e6085 0x0000000ffe4fc000:10: nonfatal error -34 setting MTU to 1500 on port 4 +[    4.135558] rtc-rs5c372 0-0032: registered as rtc0 
-[    3.633061] eth4: mtu greater than device maximum +[    4.142071] rtc-rs5c372 0-0032: setting system clock to 2024-10-10T10:28:57 UTC (1728556137
-[    3.637770] fsl_dpaa_mac ffe4e6000.ethernet eth4: error -22 setting MTU to 1508 to include DSA overhead +[    4.151545] kmodloader: done loading kernel modules from /etc/modules-boot.d/
-[    3.647177] fsl_dpaa_mac ffe4e6000.ethernet eth4: entered promiscuous mode +[    4.161472] init: - preinit -
-[    3.654082] DSA: tree 0 setup +
-[    3.657508] clk: Disabling unused clocks +
-[    3.657991] mv88e6085 0x0000000ffe4fc000:10: Link is Up - 1Gbps/Full - flow control off +
-[    3.675168] Freeing unused kernel image (initmem) memory: 17312K +
-[    3.681210] This architecture does not have kernel memory protection. +
-[    3.687663] Run /init as init process +
-[    3.894483] init: Console is alive +
-[    3.897989] init: - watchdog - +
-[    3.905363] kmodloader: loading kernel modules from /etc/modules-boot.d/+
-[    3.915121] gpio_button_hotplug: loading out-of-tree module taints kernel. +
-[    3.930257] tpm tpm0: starting up the TPM manually +
-[    4.016935] rtc-rs5c372 0-0032: rs5c372a found, 24hr +
-[    4.028842] rtc-rs5c372 0-0032: registered as rtc0 +
-[    4.035363] rtc-rs5c372 0-0032: setting system clock to 2024-09-30T06:31:45 UTC (1727677905+
-[    4.044959] kmodloader: done loading kernel modules from /etc/modules-boot.d/+
-[    4.062458] init: - preinit - +
-[    4.459358] fsl_dpaa_mac ffe4e0000.ethernet eth1: PHY [0x0000000ffe4fc000:01] driver [Marvell 88E1545] (irq=POLL) +
-[    4.469673] fsl_dpaa_mac ffe4e0000.ethernet eth1: configuring for inband/sgmii link mode+
 Press the [f] key and hit [enter] to enter failsafe mode Press the [f] key and hit [enter] to enter failsafe mode
 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
-[    7.172848] procd: - early - +[    7.135214] procd: - early - 
-[    7.175794] procd: - watchdog - +[    7.138152] procd: - watchdog - 
-[    7.717622] procd: - watchdog - +[    7.672354] procd: - watchdog - 
-[    7.720937] procd: - ubus - +[    7.675655] procd: - ubus - 
-[    7.774631] procd: - init -+[    7.728880] procd: - init -
 Please press Enter to activate this console. Please press Enter to activate this console.
-[    7.923919] kmodloader: loading kernel modules from /etc/modules.d/+[    7.841622] kmodloader: loading kernel modules from /etc/modules.d/
-[    7.931966] i2c_dev: i2c /dev entries driver +[    7.849515] i2c_dev: i2c /dev entries driver 
-[    7.942891] w83793 0-002c: set bank to 248 failed, fall back to bank 250, read reg 0xc error +[    7.859978] w83793 0-002c: set bank to 248 failed, fall back to bank 250, read reg 0xc error 
-[    7.951486] w83793 0-002c: duplicate addresses 0x48, use force_subclient +[    7.868438] w83793 0-002c: duplicate addresses 0x48, use force_subclient 
-[    7.962219] hwmon_vid: Unknown VRM version of your CPU +[    7.879076] hwmon_vid: Unknown VRM version of your CPU 
-[    7.967614] w83793 0-002d: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). +[    7.884444] w83793 0-002d: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). 
-[    7.981191] w83793 0-002d: Registered watchdog chardev major 10, minor: 212 +[    7.898145] w83793 0-002d: Registered watchdog chardev major 10, minor: 212 
-[    8.009039] PPP generic driver version 2.4.2 +[    7.924857] PPP generic driver version 2.4.2 
-[    8.014091] NET: Registered PF_PPPOX protocol family +[    7.929546] NET: Registered PF_PPPOX protocol family 
-[    8.021208] kmodloader: done loading kernel modules from /etc/modules.d/+[    7.937120] kmodloader: done loading kernel modules from /etc/modules.d/
-[    8.154926] urngd: v1.0.2 started. +[    8.037938] urngd: v1.0.2 started. 
-[   12.379461] fsl_dpaa_mac ffe4e0000.ethernet eth1: PHY [0x0000000ffe4fc000:01] driver [Marvell 88E1545] (irq=POLL) +[   12.665553] fsl_dpaa_mac ffe4e0000.ethernet eth1: phy device not initialized 
-[   12.389845] fsl_dpaa_mac ffe4e0000.ethernet eth1: configuring for inband/sgmii link mode +[   12.752701] br-lan: port 1(eth1) entered blocking state 
-[   12.399876] br-lan: port 1(eth1) entered blocking state +[   12.757955] br-lan: port 1(eth1) entered disabled state 
-[   12.405118] br-lan: port 1(eth1) entered disabled state +[   12.763406device eth1 entered promiscuous mode 
-[   12.410430fsl_dpaa_mac ffe4e0000.ethernet eth1: entered allmulticast mode +[   12.772453] fsl_dpaa_mac ffe4e2000.ethernet eth2: phy device not initialized 
-[   12.417619] fsl_dpaa_mac ffe4e0000.ethernet eth1: entered promiscuous mode +[   12.868427] fsl_dpaa_mac ffe4e6000.ethernet eth4phy device not initialized 
-[   12.509437] fsl_dpaa_mac ffe4e2000.ethernet eth2: PHY [0x0000000ffe4fc000:02] driver [Marvell 88E1545] (irq=POLL) +[   12.877410IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready 
-[   12.519755] fsl_dpaa_mac ffe4e2000.ethernet eth2configuring for inband/sgmii link mode +[   12.909232device eth4 entered promiscuous mode 
-[   12.535276fsl_dpaa_mac ffe4e6000.ethernet eth4: configuring for fixed/rgmii link mode +[   12.914646] mv88e6085 0x0000000ffe4fc000:10 sweth3: configuring for phy/ link mode 
-[   12.549964fsl_dpaa_mac ffe4e6000.ethernet eth4: Link is Up - 1Gbps/Full - flow control off +[   12.963450] mv88e6085 0x0000000ffe4fc000:10 sweth4: configuring for phy/ link mode 
-[   12.556287] mv88e6085 0x0000000ffe4fc000:10 sweth3: configuring for phy/gmii link mode +[   13.021538] mv88e6085 0x0000000ffe4fc000:10 sweth5: configuring for phy/ link mode 
-[   12.585840] mv88e6085 0x0000000ffe4fc000:10 sweth4: configuring for phy/gmii link mode +[   13.074682] mv88e6085 0x0000000ffe4fc000:10 sweth6: configuring for phy/ link mode 
-[   12.612554] mv88e6085 0x0000000ffe4fc000:10 sweth5: configuring for phy/gmii link mode +[   13.122675] mv88e6085 0x0000000ffe4fc000:10 sweth7: configuring for phy/ link mode 
-[   12.638876] mv88e6085 0x0000000ffe4fc000:10 sweth6: configuring for phy/gmii link mode +[   13.136846] fsl_dpaa_mac ffe4f2000.ethernet eth0: phy device not initialized 
-[   12.665446] mv88e6085 0x0000000ffe4fc000:10 sweth7: configuring for phy/gmii link mode +  15.852313] br-lanport 1(eth1) entered blocking state 
-[   12.749591] fsl_dpaa_mac ffe4f2000.ethernet eth0: PHY [0x0000000ffe4fc000:00driver [Marvell 88E1545] (irq=POLL+[   15.857556br-lan: port 1(eth1) entered forwarding state 
-[   12.759897fsl_dpaa_mac ffe4f2000.ethernet eth0: configuring for inband/sgmii link mode+  15.863204IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   17.373025IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  
-BusyBox v1.36.1 (2024-09-24 18:59:50 UTC) built-in shell (ash)+ 
 + 
 +BusyBox v1.36.1 (2024-09-23 12:34:46 UTC) built-in shell (ash)
  
   _______                     ________        __   _______                     ________        __
Line 1492: Line 1474:
           |__| W I R E L E S S   F R E E D O M           |__| W I R E L E S S   F R E E D O M
  -----------------------------------------------------  -----------------------------------------------------
- OpenWrt SNAPSHOTr27578-23ac1ad951+ OpenWrt 23.05.5r24106-10cc5fcd00
  -----------------------------------------------------  -----------------------------------------------------
 === WARNING! ===================================== === WARNING! =====================================
Line 1499: Line 1481:
 in order to prevent unauthorized SSH logins. in order to prevent unauthorized SSH logins.
 -------------------------------------------------- --------------------------------------------------
-root@OpenWrt:~+root@OpenWrt:/ 
 </code> </code>
  
  • Last modified: 2024/10/15 09:17
  • by evs