Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:watchguard:firebox-m300 [2024/04/17 20:42] – [Installation] fix typo stinteltoh:watchguard:firebox-m300 [2024/10/10 10:33] – Fix boot log to stable and fix issue where boot args were incorrect on the bootlog. evs
Line 2: Line 2:
  
 ===== Installation ===== ===== Installation =====
 +DEVICE IS SOURCE ONLY.
 +i.e. step 1 is build your own image.
  
 Installation instructions are in [[commit>3fda16078b9979be836df0d156ca0dc0a0778f91| Installation instructions are in [[commit>3fda16078b9979be836df0d156ca0dc0a0778f91|
-the commit message that added support for the device]]. In a [[commit>c4b499bc03ab0e2eea643c46d1d781ab64e78931|later commit]], [[https://source.denx.de/u-boot/u-boot/-/blob/master/doc/uImage.FIT/howto.txt|FIT images]] were introduced with updated instructions.+the commit message that added support for the device]]. In a [[commit>c4b499bc03ab0e2eea643c46d1d781ab64e78931|later commit]], [[https://source.denx.de/u-boot/u-boot/-/blob/master/doc/usage/fit/howto.rst|FIT images]] were introduced with updated instructions.
  
 ==== Current installation from stock firmware ==== ==== Current installation from stock firmware ====
Line 47: Line 49:
  
 Finally, reboot the device. Finally, reboot the device.
 +
 +==== TFTP ====
 +You first will need to set which port you want to TFTP boot off of.
 +Mine came as default FM1@DTSEC4.
 +
 +Port 0 is FM1@DTSEC10.
 +If you just let it sit and time out u-boot will start going through the trying the other interfaces.
 +Change it by setting u-boot variable "ethact".
 +
 +You can either use DHCP command, which will then try to boot uImage (the default filename) off of whatever it does by bootp.
 +Or setenv ipaddr ; setenv serverip; to set your local ip and server ip.
 +
 +The standard load address is pulled from u-boot variable "loadaddr" which was by default loadaddr=0x20000000
 +
 +Then just go for tftpboot <filename>.
 +
 +<code>
 +MB-M300 => setenv serverip 192.168.2.177
 +MB-M300 => setenv ipaddr 192.168.2.182
 +MB-M300 => setenv ethact FM1@DTSEC10
 +MB-M300 => setenv bootargs console=ttyS0,115200 fsl_dpaa_fman.fsl_fm_max_frm=1530
 +MB-M300 => tftpboot
 +Using FM1@DTSEC10 device
 +TFTP from server 192.168.2.177; our IP address is 192.168.2.182
 +Filename 'uImage'.
 +Load address: 0x20000000
 +Loading: #################################################################
 + #################################################################
 + #################################################################
 + #################################################################
 + #################################################################
 + #################################################################
 + #################################################################
 + #################################################################
 + #################################################################
 + #################################################################
 + #################################################################
 + #####################
 + 9.8 MiB/s
 +done
 +Bytes transferred = 10799520 (a4c9a0 hex)
 +MB-M300 => bootm
 +
 +</code>
  
 ===== Platform details ===== ===== Platform details =====
Line 866: Line 912:
 Secondary login:  Secondary login: 
 </code> </code>
 +
 +==== OpenWrt 23.05.5 ====
 +
 +<code>
 +## Loading kernel from FIT Image at 20000000 ...
 +   Using 'config-1' configuration
 +   Trying 'kernel-1' kernel subimage
 +     Description:  POWERPC OpenWrt Linux-5.15.167
 +     Created:      2024-09-23  12:34:46 UTC
 +     Type:         Kernel Image
 +     Compression:  gzip compressed
 +     Data Start:   0x200000ec
 +     Data Size:    10762045 Bytes = 10.3 MiB
 +     Architecture: PowerPC
 +     OS:           Linux
 +     Load Address: 0x00000000
 +     Entry Point:  0x00000000
 +     Hash algo:    crc32
 +     Hash value:   6fdf11b5
 +     Hash algo:    sha1
 +     Hash value:   533d952146431210efc7694883201d85fe88dc7b
 +   Verifying Hash Integrity ... crc32+ sha1+ OK
 +## Loading fdt from FIT Image at 20000000 ...
 +   Using 'config-1' configuration
 +   Trying 'fdt-1' fdt subimage
 +     Description:  POWERPC OpenWrt watchguard_firebox-m300 device tree blob
 +     Created:      2024-09-23  12:34:46 UTC
 +     Type:         Flat Device Tree
 +     Compression:  uncompressed
 +     Data Start:   0x20a43978
 +     Data Size:    35501 Bytes = 34.7 KiB
 +     Architecture: PowerPC
 +     Hash algo:    crc32
 +     Hash value:   b4cbd0ce
 +     Hash algo:    sha1
 +     Hash value:   1267dafc058b705af961db3690c9f2bfb8febfd2
 +   Verifying Hash Integrity ... crc32+ sha1+ OK
 +   Booting using the fdt blob at 0x20a43978
 +   Uncompressing Kernel Image ... OK
 +   Loading Device Tree to 03fe4000, end 03fffaac ... OK
 +[    0.000000] OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd
 +[    0.000000] OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr
 +[    0.000000] OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr
 +[    0.000000] MMU: Supported page sizes
 +[    0.000000]          4 KB as direct
 +[    0.000000]       2048 KB as direct & indirect
 +[    0.000000]       4096 KB as direct
 +[    0.000000]      16384 KB as direct
 +[    0.000000]      65536 KB as direct
 +[    0.000000]     262144 KB as direct
 +[    0.000000]    1048576 KB as direct
 +[    0.000000] MMU: Book3E HW tablewalk enabled
 +[    0.000000] Linux version 5.15.167 (evan@debian-12-buildopenwrt) (powerpc64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24106-10cc5fcd00)4
 +[    0.000000] Using CoreNet Generic machine description
 +[    0.000000] printk: bootconsole [udbg0] enabled
 +[    0.000000] CPU maps initialized for 2 threads per core
 +[    0.000000] -----------------------------------------------------
 +[    0.000000] phys_mem_size     = 0x100000000
 +[    0.000000] dcache_bsize      = 0x40
 +[    0.000000] icache_bsize      = 0x40
 +[    0.000000] cpu_features      = 0x0000000300900396
 +[    0.000000]   possible        = 0x0000000300900396
 +[    0.000000]   always          = 0x0000000300800394
 +[    0.000000] cpu_user_features = 0xdc008000 0x08000000
 +[    0.000000] mmu_features      = 0x000a0010
 +[    0.000000] firmware_features = 0x0000000000000000
 +[    0.000000] -----------------------------------------------------
 +[    0.000000] ioremap() called early from .of_iomap+0x44/0x80. Use early_ioremap() instead
 +[    0.000000] CoreNet Generic board
 +[    0.000000] barrier-nospec: using isync; sync as speculation barrier
 +[    0.000000] Zone ranges:
 +[    0.000000]   DMA      [mem 0x0000000000000000-0x000000007fffffff]
 +[    0.000000]   Normal   [mem 0x0000000080000000-0x00000000ffffffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x00000000ffffffff]
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff]
 +[    0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts
 +[    0.000000] percpu: Embedded 17 pages/cpu s32472 r0 d37160 u131072
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192
 +[    0.000000] Kernel command line: console=ttyS0,115200 fsl_dpaa_fman.fsl_fm_max_frm=1530
 +[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
 +[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
 +[    0.000000] Memory: 3968128K/4194304K available (9756K kernel code, 1048K rwdata, 1924K rodata, 19576K init, 307K bss, 226176K reserved, )
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
 +[    0.000000] rcu: Hierarchical RCU implementation.
 +[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=8.
 +[    0.000000]  Tracing variant of Tasks RCU enabled.
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
 +[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
 +[    0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
 +[    0.000000] mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe040000, max 8 CPUs
 +[    0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff
 +[    0.000000] mpic: Initializing for 512 sources
 +[    0.000001] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x8a60dd6a9, max_idle_ns: 440795204056 ns
 +[    0.010191] clocksource: timebase mult[1aaaaaab] shift[24] registered
 +[    0.018826] Console: colour dummy device 80x25
 +[    0.023207] pid_max: default: 32768 minimum: 301
 +[    0.028094] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
 +[    0.035419] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
 +[    0.044449] rcu: Hierarchical SRCU implementation.
 +[    0.049451] smp: Bringing up secondary CPUs ...
 +[    0.056676] smp: Brought up 1 node, 8 CPUs
 +[    0.064922] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 +[    0.074683] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
 +[    0.082264] NET: Registered PF_NETLINK/PF_ROUTE protocol family
 +[    0.088540] thermal_sys: Registered thermal governor 'step_wise'
 +[    0.088720] cpuidle: using governor teo
 +[    0.110055] Machine: WatchGuard Firebox M300
 +[    0.114236] SoC family: QorIQ T2080
 +[    0.117718] SoC ID: svr:0x85390011, Revision: 1.1
 +[    0.125167] Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->0
 +[    0.133004] PCI host bridge /pcie@ffe240000  ranges:
 +[    0.137960]  MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 
 +[    0.145176]   IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
 +[    0.152327] /pcie@ffe240000: PCICSRBAR @ 0xdf000007
 +[    0.157172] setup_pci_atmu: end of DRAM 100000000
 +[    0.161870] /pcie@ffe240000: Setup 64-bit PCI DMA window
 +[    0.167165] /pcie@ffe240000: DMA window size is 0xdf000007
 +[    0.172959] Found FSL PCI host bridge at 0x0000000ffe250000. Firmware bus number: 0->0
 +[    0.180794] PCI host bridge /pcie@ffe250000  ranges:
 +[    0.185751]  MEM 0x0000000c20000000..0x0000000c2fffffff -> 0x00000000e0000000 
 +[    0.192966]   IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
 +[    0.200109] /pcie@ffe250000: PCICSRBAR @ 0xff000007
 +[    0.204962] setup_pci_atmu: end of DRAM 100000000
 +[    0.209660] /pcie@ffe250000: Setup 64-bit PCI DMA window
 +[    0.214955] /pcie@ffe250000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo.
 +[    0.228607] /pcie@ffe250000: DMA window size is 0xe0000000
 +[    0.234399] Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->0
 +[    0.242235] PCI host bridge /pcie@ffe260000  ranges:
 +[    0.247192]  MEM 0x0000000c30000000..0x0000000c3fffffff -> 0x00000000e0000000 
 +[    0.254407]   IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000
 +[    0.261550] /pcie@ffe260000: PCICSRBAR @ 0xff000007
 +[    0.266403] setup_pci_atmu: end of DRAM 100000000
 +[    0.271101] /pcie@ffe260000: Setup 64-bit PCI DMA window
 +[    0.276396] /pcie@ffe260000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo.
 +[    0.290047] /pcie@ffe260000: DMA window size is 0xe0000000
 +[    0.295836] Found FSL PCI host bridge at 0x0000000ffe270000. Firmware bus number: 0->0
 +[    0.303672] PCI host bridge /pcie@ffe270000  ranges:
 +[    0.308629]  MEM 0x0000000c40000000..0x0000000c4fffffff -> 0x00000000e0000000 
 +[    0.315844]   IO 0x0000000ff8030000..0x0000000ff803ffff -> 0x0000000000000000
 +[    0.322987] /pcie@ffe270000: PCICSRBAR @ 0xff000007
 +[    0.327844] setup_pci_atmu: end of DRAM 100000000
 +[    0.332537] /pcie@ffe270000: Setup 64-bit PCI DMA window
 +[    0.337833] /pcie@ffe270000: WARNING: Outbound window cfg leaves gaps in memory map. Adjusting the memory map could reduce unnecessary bo.
 +[    0.351484] /pcie@ffe270000: DMA window size is 0xe0000000
 +[    0.358263] platform ff6000000.qman-portal: Adding to iommu group 0
 +[    0.364473] platform ff6004000.qman-portal: Adding to iommu group 1
 +[    0.370719] platform ff6008000.qman-portal: Adding to iommu group 2
 +[    0.376982] platform ff600c000.qman-portal: Adding to iommu group 3
 +[    0.383246] platform ff6010000.qman-portal: Adding to iommu group 4
 +[    0.389501] platform ff6014000.qman-portal: Adding to iommu group 5
 +[    0.395755] platform ff6018000.qman-portal: Adding to iommu group 6
 +[    0.402019] platform ff601c000.qman-portal: Adding to iommu group 7
 +[    0.408282] platform ff6020000.qman-portal: Adding to iommu group 8
 +[    0.414537] platform ff6024000.qman-portal: Adding to iommu group 9
 +[    0.420794] platform ff6028000.qman-portal: Adding to iommu group 10
 +[    0.427143] platform ff602c000.qman-portal: Adding to iommu group 11
 +[    0.433493] platform ff6030000.qman-portal: Adding to iommu group 12
 +[    0.439836] platform ff6034000.qman-portal: Adding to iommu group 13
 +[    0.446177] platform ff6038000.qman-portal: Adding to iommu group 14
 +[    0.452527] platform ff603c000.qman-portal: Adding to iommu group 15
 +[    0.458878] platform ff6040000.qman-portal: Adding to iommu group 16
 +[    0.465220] platform ff6044000.qman-portal: Adding to iommu group 17
 +[    0.471565] platform ffe114000.sdhc: Adding to iommu group 18
 +[    0.477317] platform ffe100300.dma: Adding to iommu group 19
 +[    0.482958] platform ffe101300.dma: Adding to iommu group 20
 +[    0.488605] platform ffe102300.dma: Adding to iommu group 21
 +[    0.494260] platform ffe210000.usb: Adding to iommu group 22
 +[    0.499906] platform ffe211000.usb: Adding to iommu group 23
 +[    0.505562] platform ffe318000.qman: Adding to iommu group 24
 +[    0.511294] platform ffe31a000.bman: Adding to iommu group 25
 +[    0.517030] fsl-pci ffe240000.pcie: Adding to iommu group 26
 +[    0.522684] fsl-pci ffe250000.pcie: Adding to iommu group 27
 +[    0.528339] fsl-pci ffe260000.pcie: Adding to iommu group 28
 +[    0.533986] fsl-pci ffe270000.pcie: Adding to iommu group 29
 +[    0.549329] software IO TLB: mapped [mem 0x0000000003ff6000-0x0000000007ff6000] (64MB)
 +[    0.557171] PCI: Probing PCI hardware
 +[    0.560901] fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00
 +[    0.566996] pci_bus 0000:00: root bus resource [io  0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff])
 +[    0.577870] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
 +[    0.588211] pci_bus 0000:00: root bus resource [bus 00]
 +[    0.593423] pci_bus 0000:00: busn_res: [bus 00] end is updated to ff
 +[    0.599805] pci 0000:00:00.0: [1957:0838] type 01 class 0x060400
 +[    0.605778] pci 0000:00:00.0: reg 0x10: [io  0xdf000004-0xdf000007]
 +[    0.612038] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref]
 +[    0.618797] pci 0000:00:00.0: supports D1 D2
 +[    0.622983] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
 +[    0.629089] fsl-pci ffe240000.pcie: Removing from iommu group 26
 +[    0.635037] pci 0000:00:00.0: Adding to iommu group 30
 +[    0.642468] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +[    0.652725] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
 +[    0.657868] pci 0000:00:00.0:   bridge window [io  0x8000080000010000-0x8000080000010fff]
 +[    0.666041] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
 +[    0.672821] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
 +[    0.680566] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 +[    0.687163] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
 +[    0.693825] fsl-pci ffe250000.pcie: PCI host bridge to bus 0001:00
 +[    0.699941] pci_bus 0001:00: root bus resource [io  0x8000080000021000-0x8000080000030fff] (bus address [0x0000-0xffff])
 +[    0.710811] pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc2fffffff] (bus address [0xe0000000-0xefffffff])
 +[    0.721155] pci_bus 0001:00: root bus resource [bus 00]
 +[    0.726368] pci_bus 0001:00: busn_res: [bus 00] end is updated to ff
 +[    0.732737] pci 0001:00:00.0: [1957:0838] type 01 class 0x060400
 +[    0.738722] pci 0001:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
 +[    0.746114] pci 0001:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref]
 +[    0.752848] pci 0001:00:00.0: supports D1 D2
 +[    0.757058] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
 +[    0.763155] fsl-pci ffe250000.pcie: Removing from iommu group 27
 +[    0.769097] pci 0001:00:00.0: Adding to iommu group 26
 +[    0.776509] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +[    0.786775] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
 +[    0.791917] pci 0001:00:00.0:   bridge window [io  0x8000080000021000-0x8000080000021fff]
 +[    0.800090] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
 +[    0.806869] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
 +[    0.814615] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
 +[    0.821212] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
 +[    0.827887] fsl-pci ffe260000.pcie: PCI host bridge to bus 0002:00
 +[    0.833990] pci_bus 0002:00: root bus resource [io  0x8000080000032000-0x8000080000041fff] (bus address [0x0000-0xffff])
 +[    0.844860] pci_bus 0002:00: root bus resource [mem 0xc30000000-0xc3fffffff] (bus address [0xe0000000-0xefffffff])
 +[    0.855203] pci_bus 0002:00: root bus resource [bus 00]
 +[    0.860417] pci_bus 0002:00: busn_res: [bus 00] end is updated to ff
 +[    0.866787] pci 0002:00:00.0: [1957:0838] type 01 class 0x060400
 +[    0.872771] pci 0002:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
 +[    0.880163] pci 0002:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref]
 +[    0.886897] pci 0002:00:00.0: supports D1 D2
 +[    0.891107] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot
 +[    0.897187] fsl-pci ffe260000.pcie: Removing from iommu group 28
 +[    0.903128] pci 0002:00:00.0: Adding to iommu group 27
 +[    0.910541] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +[    0.920813] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
 +[    0.925956] pci 0002:00:00.0:   bridge window [io  0x8000080000032000-0x8000080000032fff]
 +[    0.934129] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
 +[    0.940909] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
 +[    0.948654] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
 +[    0.955251] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01
 +[    0.961921] fsl-pci ffe270000.pcie: PCI host bridge to bus 0003:00
 +[    0.968029] pci_bus 0003:00: root bus resource [io  0x8000080000043000-0x8000080000052fff] (bus address [0x0000-0xffff])
 +[    0.978899] pci_bus 0003:00: root bus resource [mem 0xc40000000-0xc4fffffff] (bus address [0xe0000000-0xefffffff])
 +[    0.989242] pci_bus 0003:00: root bus resource [bus 00]
 +[    0.994456] pci_bus 0003:00: busn_res: [bus 00] end is updated to ff
 +[    1.000826] pci 0003:00:00.0: [1957:0838] type 01 class 0x060400
 +[    1.006810] pci 0003:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
 +[    1.014202] pci 0003:00:00.0: reg 0x38: [mem 0x00000000-0x00ffffff pref]
 +[    1.020937] pci 0003:00:00.0: supports D1 D2
 +[    1.025146] pci 0003:00:00.0: PME# supported from D0 D1 D2 D3hot
 +[    1.031227] fsl-pci ffe270000.pcie: Removing from iommu group 29
 +[    1.037168] pci 0003:00:00.0: Adding to iommu group 28
 +[    1.044580] pci 0003:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 +[    1.054846] pci 0003:00:00.0: PCI bridge to [bus 01-ff]
 +[    1.059989] pci 0003:00:00.0:   bridge window [io  0x8000080000043000-0x8000080000043fff]
 +[    1.068162] pci 0003:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
 +[    1.074941] pci 0003:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
 +[    1.082690] pci_bus 0003:01: busn_res: [bus 01-ff] end is updated to 01
 +[    1.089283] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01
 +[    1.095898] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
 +[    1.103761] pci 0000:00:00.0: BAR 6: no space for [mem size 0x01000000 pref]
 +[    1.110756] pci 0000:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref]
 +[    1.118143] pci 0000:00:00.0: BAR 0: no space for [io  size 0x0004]
 +[    1.124405] pci 0000:00:00.0: BAR 0: failed to assign [io  size 0x0004]
 +[    1.131019] pci 0000:00:00.0: PCI bridge to [bus 01]
 +[    1.135969] pci 0000:00:00.0:   bridge window [io  0x8000080000010000-0x800008000001ffff]
 +[    1.144138] pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff]
 +[    1.151098] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
 +[    1.160132] pci_bus 0000:00: resource 4 [io  0x8000080000010000-0x800008000001ffff]
 +[    1.167785] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
 +[    1.174215] pci_bus 0000:01: resource 0 [io  0x8000080000010000-0x800008000001ffff]
 +[    1.181868] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
 +[    1.188301] pci 0001:00:00.0: BAR 6: no space for [mem size 0x01000000 pref]
 +[    1.195343] pci 0001:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref]
 +[    1.202730] pci 0001:00:00.0: PCI bridge to [bus 01]
 +[    1.207688] pci 0001:00:00.0:   bridge window [io  0x8000080000021000-0x8000080000030fff]
 +[    1.215858] pci 0001:00:00.0:   bridge window [mem 0xc20000000-0xc2fffffff]
 +[    1.222817] pci_bus 0001:00: resource 4 [io  0x8000080000021000-0x8000080000030fff]
 +[    1.230461] pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc2fffffff]
 +[    1.236897] pci_bus 0001:01: resource 0 [io  0x8000080000021000-0x8000080000030fff]
 +[    1.244544] pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc2fffffff]
 +[    1.250983] pci 0002:00:00.0: BAR 6: no space for [mem size 0x01000000 pref]
 +[    1.258018] pci 0002:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref]
 +[    1.265412] pci 0002:00:00.0: PCI bridge to [bus 01]
 +[    1.270365] pci 0002:00:00.0:   bridge window [io  0x8000080000032000-0x8000080000041fff]
 +[    1.278539] pci 0002:00:00.0:   bridge window [mem 0xc30000000-0xc3fffffff]
 +[    1.285493] pci_bus 0002:00: resource 4 [io  0x8000080000032000-0x8000080000041fff]
 +[    1.293143] pci_bus 0002:00: resource 5 [mem 0xc30000000-0xc3fffffff]
 +[    1.299573] pci_bus 0002:01: resource 0 [io  0x8000080000032000-0x8000080000041fff]
 +[    1.307226] pci_bus 0002:01: resource 1 [mem 0xc30000000-0xc3fffffff]
 +[    1.313659] pci 0003:00:00.0: BAR 6: no space for [mem size 0x01000000 pref]
 +[    1.320701] pci 0003:00:00.0: BAR 6: failed to assign [mem size 0x01000000 pref]
 +[    1.328087] pci 0003:00:00.0: PCI bridge to [bus 01]
 +[    1.333050] pci 0003:00:00.0:   bridge window [io  0x8000080000043000-0x8000080000052fff]
 +[    1.341215] pci 0003:00:00.0:   bridge window [mem 0xc40000000-0xc4fffffff]
 +[    1.348175] pci_bus 0003:00: resource 4 [io  0x8000080000043000-0x8000080000052fff]
 +[    1.355819] pci_bus 0003:00: resource 5 [mem 0xc40000000-0xc4fffffff]
 +[    1.362255] pci_bus 0003:01: resource 0 [io  0x8000080000043000-0x8000080000052fff]
 +[    1.369902] pci_bus 0003:01: resource 1 [mem 0xc40000000-0xc4fffffff]
 +[    1.382991] Freescale Elo series DMA driver
 +[    1.387291] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
 +[    1.394231] fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
 +[    1.401165] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
 +[    1.408133] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
 +[    1.415074] fsl-elo-dma ffe100300.dma: #4 (fsl,eloplus-dma-channel), irq 76
 +[    1.422033] fsl-elo-dma ffe100300.dma: #5 (fsl,eloplus-dma-channel), irq 77
 +[    1.428983] fsl-elo-dma ffe100300.dma: #6 (fsl,eloplus-dma-channel), irq 78
 +[    1.435950] fsl-elo-dma ffe100300.dma: #7 (fsl,eloplus-dma-channel), irq 79
 +[    1.443285] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
 +[    1.450218] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
 +[    1.457158] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
 +[    1.464118] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
 +[    1.471068] fsl-elo-dma ffe101300.dma: #4 (fsl,eloplus-dma-channel), irq 80
 +[    1.478035] fsl-elo-dma ffe101300.dma: #5 (fsl,eloplus-dma-channel), irq 81
 +[    1.484977] fsl-elo-dma ffe101300.dma: #6 (fsl,eloplus-dma-channel), irq 82
 +[    1.491937] fsl-elo-dma ffe101300.dma: #7 (fsl,eloplus-dma-channel), irq 83
 +[    1.499300] fsl-elo-dma ffe102300.dma: #0 (fsl,eloplus-dma-channel), irq 464
 +[    1.506311] fsl-elo-dma ffe102300.dma: #1 (fsl,eloplus-dma-channel), irq 465
 +[    1.513354] fsl-elo-dma ffe102300.dma: #2 (fsl,eloplus-dma-channel), irq 466
 +[    1.520393] fsl-elo-dma ffe102300.dma: #3 (fsl,eloplus-dma-channel), irq 467
 +[    1.527430] fsl-elo-dma ffe102300.dma: #4 (fsl,eloplus-dma-channel), irq 471
 +[    1.534477] fsl-elo-dma ffe102300.dma: #5 (fsl,eloplus-dma-channel), irq 472
 +[    1.541522] fsl-elo-dma ffe102300.dma: #6 (fsl,eloplus-dma-channel), irq 473
 +[    1.548564] fsl-elo-dma ffe102300.dma: #7 (fsl,eloplus-dma-channel), irq 474
 +[    1.555987] iommu: Default domain type: Translated 
 +[    1.560780] iommu: DMA domain TLB invalidation policy: strict mode 
 +[    1.567166] SCSI subsystem initialized
 +[    1.570936] usbcore: registered new interface driver usbfs
 +[    1.576353] usbcore: registered new interface driver hub
 +[    1.581659] usbcore: registered new device driver usb
 +[    1.586708] pps_core: LinuxPPS API ver. 1 registered
 +[    1.591633] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 +[    1.600782] PTP clock support registered
 +[    1.604684] EDAC MC: Ver: 3.0.0
 +[    1.608003] fsl-ifc ffe124000.localbus: Freescale Integrated Flash Controller
 +[    1.615073] fsl-ifc ffe124000.localbus: IFC version 1.3, 8 banks
 +[    1.621882] clocksource: Switched to clocksource timebase
 +[    1.629666] NET: Registered PF_INET protocol family
 +[    1.634632] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
 +[    1.643587] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
 +[    1.652063] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
 +[    1.659779] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
 +[    1.667826] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
 +[    1.675299] TCP: Hash tables configured (established 32768 bind 32768)
 +[    1.681837] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
 +[    1.688507] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
 +[    1.695767] NET: Registered PF_UNIX/PF_LOCAL protocol family
 +[    1.701394] PCI: CLS 0 bytes, default 64
 +[    1.706335] workingset: timestamp_bits=46 max_order=20 bucket_order=0
 +[    1.717517] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    1.723288] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    1.753593] bman_portal ff4000000.bman-portal: Portal initialised, cpu 0
 +[    1.760398] bman_portal ff4004000.bman-portal: Portal initialised, cpu 1
 +[    1.767233] bman_portal ff4008000.bman-portal: Portal initialised, cpu 2
 +[    1.774020] bman_portal ff400c000.bman-portal: Portal initialised, cpu 3
 +[    1.780771] bman_portal ff4010000.bman-portal: Portal initialised, cpu 4
 +[    1.787581] bman_portal ff4014000.bman-portal: Portal initialised, cpu 5
 +[    1.794403] bman_portal ff4018000.bman-portal: Portal initialised, cpu 6
 +[    1.801181] bman_portal ff401c000.bman-portal: Portal initialised, cpu 7
 +[    1.808727] qman_portal ff6000000.qman-portal: Portal initialised, cpu 0
 +[    1.815457] qman_portal ff6004000.qman-portal: Portal initialised, cpu 1
 +[    1.822161] qman_portal ff6008000.qman-portal: Portal initialised, cpu 2
 +[    1.828853] qman_portal ff600c000.qman-portal: Portal initialised, cpu 3
 +[    1.835574] qman_portal ff6010000.qman-portal: Portal initialised, cpu 4
 +[    1.842283] qman_portal ff6014000.qman-portal: Portal initialised, cpu 5
 +[    1.848988] qman_portal ff6018000.qman-portal: Portal initialised, cpu 6
 +[    1.855840] qman_portal ff601c000.qman-portal: Portal initialised, cpu 7
 +[    1.863172] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
 +[    1.870133] printk: console [ttyS0] disabled
 +[    1.874354] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 18750000) is a 16550A
 +[    1.883123] printk: console [ttyS0] enabled
 +[    1.883123] printk: console [ttyS0] enabled
 +[    1.891445] printk: bootconsole [udbg0] disabled
 +[    1.891445] printk: bootconsole [udbg0] disabled
 +[    1.900880] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 18750000) is a 16550A
 +[    1.909885] serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 18750000) is a 16550A
 +[    1.918889] serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 18750000) is a 16550A
 +[    1.930674] loop: module loaded
 +[    1.934257] physmap-flash fefc00000.nor: physmap platform flash device: [mem 0xfefc00000-0xfefffffff]
 +[    1.943563] fefc00000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
 +[    1.953669] Amd/Fujitsu Extended Query Table at 0x0040
 +[    1.958822]   Amd/Fujitsu Extended Query version 1.3.
 +[    1.963881] number of CFI chips: 1
 +[    1.974856] 11 fixed-partitions partitions found on MTD device fefc00000.nor
 +[    1.981921] Creating 11 MTD partitions on "fefc00000.nor":
 +[    1.987408] 0x000000000000-0x000000010000 : "qoriq-rcw"
 +[    1.992958] ftl_cs: FTL header not found.
 +[    1.997063] 0x000000010000-0x000000030000 : "wg_cfg0"
 +[    2.002278] ftl_cs: FTL header not found.
 +[    2.006348] 0x000000030000-0x000000040000 : "wg_cfg1"
 +[    2.011517] ftl_cs: FTL header not found.
 +[    2.015584] 0x000000040000-0x000000050000 : "wg_mfg_data"
 +[    2.021110] ftl_cs: FTL header not found.
 +[    2.025179] 0x000000050000-0x000000100000 : "wg_bootopt_data_and_reserved"
 +[    2.032392] ftl_cs: FTL header not found.
 +[    2.036457] 0x000000100000-0x0000001b0000 : "wg_extra_reserved_1"
 +[    2.042906] ftl_cs: FTL header not found.
 +[    2.046991] 0x0000001b0000-0x000000260000 : "wg_extra_reserved_2"
 +[    2.053433] ftl_cs: FTL header not found.
 +[    2.057526] 0x000000260000-0x000000320000 : "wg_u-boot_failsafe"
 +[    2.063907] ftl_cs: FTL header not found.
 +[    2.067983] 0x000000320000-0x000000330000 : "qoriq-fman"
 +[    2.073586] ftl_cs: FTL header not found.
 +[    2.077709] 0x000000330000-0x000000340000 : "u-boot-env"
 +[    2.083169] ftl_cs: FTL header not found.
 +[    2.087244] 0x000000340000-0x000000400000 : "u-boot"
 +[    2.092575] ftl_cs: FTL header not found.
 +[    2.099554] fsl_espi ffe110000.spi: irq = 53
 +[    2.115109] hwmon hwmon0: temp1_input not attached to any thermal zone
 +[    2.125640] hwmon hwmon1: temp1_input not attached to any thermal zone
 +[    2.136121] hwmon hwmon2: temp1_input not attached to any thermal zone
 +[    2.146558] hwmon hwmon3: temp1_input not attached to any thermal zone
 +[    2.153705] mv88e6085 0x0000000ffe4fc000:10: switch 0x1710 detected: Marvell 88E6171, revision 2
 +[    2.241844] fsl_dpaa_mac ffe4f2000.ethernet: FMan MEMAC
 +[    2.247099] fsl_dpaa_mac ffe4f2000.ethernet: FMan MAC address: <redacted>6
 +[    2.254759] fsl_dpaa_mac ffe4e0000.ethernet: FMan MEMAC
 +[    2.259987] fsl_dpaa_mac ffe4e0000.ethernet: FMan MAC address: <redacted>7
 +[    2.267660] fsl_dpaa_mac ffe4e2000.ethernet: FMan MEMAC
 +[    2.272893] fsl_dpaa_mac ffe4e2000.ethernet: FMan MAC address: <redacted>8
 +[    2.284310] fsl_dpaa_mac ffe4e4000.ethernet: FMan MEMAC
 +[    2.289542] fsl_dpaa_mac ffe4e4000.ethernet: FMan MAC address: <redacted>9
 +[    2.300633] fsl_dpaa_mac ffe4e6000.ethernet: FMan MEMAC
 +[    2.305873] fsl_dpaa_mac ffe4e6000.ethernet: FMan MAC address: <redacted>a
 +[    2.319106] fsl_dpaa_mac ffe4f2000.ethernet eth0: Probed interface eth0
 +[    2.331662] fsl_dpaa_mac ffe4e0000.ethernet eth1: Probed interface eth1
 +[    2.344027] fsl_dpaa_mac ffe4e2000.ethernet eth2: Probed interface eth2
 +[    2.356573] fsl_dpaa_mac ffe4e4000.ethernet eth3: Probed interface eth3
 +[    2.369145] fsl_dpaa_mac ffe4e6000.ethernet eth4: Probed interface eth4
 +[    2.375837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +[    2.382973] fsl-ehci: Freescale EHCI Host controller driver
 +[    2.388624] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
 +[    2.395256] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
 +[    2.412406] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
 +[    2.441888] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
 +[    2.447838] hub 1-0:1.0: USB hub found
 +[    2.451609] hub 1-0:1.0: 1 port detected
 +[    2.455807] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
 +[    2.462446] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
 +[    2.479583] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
 +[    2.511888] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
 +[    2.517828] hub 2-0:1.0: USB hub found
 +[    2.521597] hub 2-0:1.0: 1 port detected
 +[    2.526065] usbcore: registered new interface driver uas
 +[    2.531437] usbcore: registered new interface driver usb-storage
 +[    2.538025] mpc-i2c ffe118000.i2c: timeout 1000000 us
 +[    2.543462] mpc-i2c ffe118100.i2c: timeout 1000000 us
 +[    2.548634] mpc-i2c ffe119000.i2c: timeout 1000000 us
 +[    2.553798] mpc-i2c ffe119100.i2c: timeout 1000000 us
 +[    2.559256] ptp_qoriq: device tree node missing required elements, try automatic configuration
 +[    2.567950] pps pps0: new PPS source ptp0
 +[    2.572287] booke_wdt: powerpc book-e watchdog driver loaded
 +[    2.578032] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software
 +[    2.585429] EDAC MC0: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT)
 +[    2.595643] fsl_ddr_edac acquired irq 490 for MC
 +[    2.600259] fsl_ddr_edac MC err registered
 +[    2.605765] EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT)
 +[    2.617633] MPC85xx_edac acquired irq 20 for PCI Err
 +[    2.622603] MPC85xx_edac PCI err registered
 +[    2.626832] EDAC PCI1: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.1.auto (INTERRUPT)
 +[    2.638689] MPC85xx_edac acquired irq 21 for PCI Err
 +[    2.643658] MPC85xx_edac PCI err registered
 +[    2.647885] EDAC PCI2: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.2.auto (INTERRUPT)
 +[    2.659741] MPC85xx_edac acquired irq 22 for PCI Err
 +[    2.664710] MPC85xx_edac PCI err registered
 +[    2.668949] EDAC PCI3: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.3.auto (INTERRUPT)
 +[    2.680812] MPC85xx_edac acquired irq 23 for PCI Err
 +[    2.685781] MPC85xx_edac PCI err registered
 +[    2.690342] qoriq-cpufreq qoriq-cpufreq: Disabling due to erratum A-008083
 +[    2.697531] sdhci: Secure Digital Host Controller Interface driver
 +[    2.703718] sdhci: Copyright(c) Pierre Ossman
 +[    2.708074] sdhci-pltfm: SDHCI platform and OF driver helper
 +[    2.714817] caam ffe300000.crypto: Linux CAAM Queue I/F driver initialised
 +[    2.721707] caam ffe300000.crypto: Entropy delay = 3200
 +[    2.753681] caam ffe300000.crypto: Instantiated RNG4 SH0
 +[    2.780416] caam ffe300000.crypto: Instantiated RNG4 SH1
 +[    2.785736] caam ffe300000.crypto: device ID = 0x0a13020000000000 (Era 6)
 +[    2.792533] caam ffe300000.crypto: job rings = 4, qi = 1
 +[    2.797966] platform ffe301000.jr: Adding to iommu group 29
 +[    2.803797] platform ffe302000.jr: Adding to iommu group 31
 +[    2.809574] platform ffe303000.jr: Adding to iommu group 32
 +[    2.815359] platform ffe304000.jr: Adding to iommu group 33
 +[    2.825696] caam algorithms registered in /proc/crypto
 +[    2.831830] caam ffe300000.crypto: caam pkc algorithms registered in /proc/crypto
 +[    2.839335] caam ffe300000.crypto: registering rng-caam
 +[    2.844414] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA 64-bit
 +[    2.847693] caam ffe300000.crypto: algorithms registered in /proc/crypto
 +[    2.860687] NET: Registered PF_INET6 protocol family
 +[    2.866556] Segment Routing with IPv6
 +[    2.870243] In-situ OAM (IOAM) with IPv6
 +[    2.874219] NET: Registered PF_PACKET protocol family
 +[    2.879357] 8021q: 802.1Q VLAN Support v1.8
 +[    2.883603] drmem: No dynamic reconfiguration memory found
 +[    2.891032] mv88e6085 0x0000000ffe4fc000:10: switch 0x1710 detected: Marvell 88E6171, revision 2
 +[    2.907077] mmc0: new high speed SDHC card at address 59b4
 +[    2.912864] mmcblk0: mmc0:59b4 SDC   7.34 GiB 
 +[    2.918324]  mmcblk0: p1 p2
 +[    2.924860] random: crng init done
 +[    3.651212] mv88e6085 0x0000000ffe4fc000:10: configuring for fixed/rgmii-id link mode
 +[    3.667201] mv88e6085 0x0000000ffe4fc000:10: Link is Up - 1Gbps/Full - flow control off
 +[    3.676024] mv88e6085 0x0000000ffe4fc000:10 sweth3 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:00] driver )
 +[    3.702118] mv88e6085 0x0000000ffe4fc000:10 sweth4 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:01] driver )
 +[    3.725520] mv88e6085 0x0000000ffe4fc000:10 sweth5 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:02] driver )
 +[    3.746789] mv88e6085 0x0000000ffe4fc000:10 sweth6 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:03] driver )
 +[    3.768054] mv88e6085 0x0000000ffe4fc000:10 sweth7 (uninitialized): PHY [!soc@ffe000000!fman@400000!mdio@fc000!switch@10!mdio:04] driver )
 +[    3.783736] DSA: tree 0 setup
 +[    3.787280] clk: Disabling unused clocks
 +[    3.797669] Freeing unused kernel image (initmem) memory: 19576K
 +[    3.803752] This architecture does not have kernel memory protection.
 +[    3.810202] Run /init as init process
 +[    4.013596] init: Console is alive
 +[    4.017118] init: - watchdog -
 +[    4.023952] kmodloader: loading kernel modules from /etc/modules-boot.d/*
 +[    4.041782] tpm tpm0: starting up the TPM manually
 +[    4.123687] rtc-rs5c372 0-0032: rs5c372a found, 24hr
 +[    4.135558] rtc-rs5c372 0-0032: registered as rtc0
 +[    4.142071] rtc-rs5c372 0-0032: setting system clock to 2024-10-10T10:28:57 UTC (1728556137)
 +[    4.151545] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
 +[    4.161472] init: - preinit -
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +[    7.135214] procd: - early -
 +[    7.138152] procd: - watchdog -
 +[    7.672354] procd: - watchdog -
 +[    7.675655] procd: - ubus -
 +[    7.728880] procd: - init -
 +Please press Enter to activate this console.
 +[    7.841622] kmodloader: loading kernel modules from /etc/modules.d/*
 +[    7.849515] i2c_dev: i2c /dev entries driver
 +[    7.859978] w83793 0-002c: set bank to 248 failed, fall back to bank 250, read reg 0xc error
 +[    7.868438] w83793 0-002c: duplicate addresses 0x48, use force_subclient
 +[    7.879076] hwmon_vid: Unknown VRM version of your CPU
 +[    7.884444] w83793 0-002d: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
 +[    7.898145] w83793 0-002d: Registered watchdog chardev major 10, minor: 212
 +[    7.924857] PPP generic driver version 2.4.2
 +[    7.929546] NET: Registered PF_PPPOX protocol family
 +[    7.937120] kmodloader: done loading kernel modules from /etc/modules.d/*
 +[    8.037938] urngd: v1.0.2 started.
 +[   12.665553] fsl_dpaa_mac ffe4e0000.ethernet eth1: phy device not initialized
 +[   12.752701] br-lan: port 1(eth1) entered blocking state
 +[   12.757955] br-lan: port 1(eth1) entered disabled state
 +[   12.763406] device eth1 entered promiscuous mode
 +[   12.772453] fsl_dpaa_mac ffe4e2000.ethernet eth2: phy device not initialized
 +[   12.868427] fsl_dpaa_mac ffe4e6000.ethernet eth4: phy device not initialized
 +[   12.877410] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
 +[   12.909232] device eth4 entered promiscuous mode
 +[   12.914646] mv88e6085 0x0000000ffe4fc000:10 sweth3: configuring for phy/ link mode
 +[   12.963450] mv88e6085 0x0000000ffe4fc000:10 sweth4: configuring for phy/ link mode
 +[   13.021538] mv88e6085 0x0000000ffe4fc000:10 sweth5: configuring for phy/ link mode
 +[   13.074682] mv88e6085 0x0000000ffe4fc000:10 sweth6: configuring for phy/ link mode
 +[   13.122675] mv88e6085 0x0000000ffe4fc000:10 sweth7: configuring for phy/ link mode
 +[   13.136846] fsl_dpaa_mac ffe4f2000.ethernet eth0: phy device not initialized
 +[   15.852313] br-lan: port 1(eth1) entered blocking state
 +[   15.857556] br-lan: port 1(eth1) entered forwarding state
 +[   15.863204] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
 +[   17.373025] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 +
 +
 +
 +BusyBox v1.36.1 (2024-09-23 12:34:46 UTC) built-in shell (ash)
 +
 +  _______                     ________        __
 +       |.-----.-----.-----.|  |  |  |.----.|  |_
 +     ||  _  |  -__|     ||  |  |  ||   _||   _|
 + |_______||   __|_____|__|__||________||__|  |____|
 +          |__| W I R E L E S S   F R E E D O M
 + -----------------------------------------------------
 + OpenWrt 23.05.5, r24106-10cc5fcd00
 + -----------------------------------------------------
 +=== WARNING! =====================================
 +There is no root password defined on this device!
 +Use the "passwd" command to set up a new password
 +in order to prevent unauthorized SSH logins.
 +--------------------------------------------------
 +root@OpenWrt:/# 
 +
 +</code>
 +
 +
 +===== Power Consumption =====
 +
 +Off: 1.3W
 +
 +Boot: 24.2W
 +
 +Idle: 21.0W
 +
  
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
 {{tag>EXAMPLETAG}} {{tag>EXAMPLETAG}}
  • Last modified: 2024/10/15 09:17
  • by evs