Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:vonets:vonets_vha300 [2015/10/25 19:39] – Created from the form at meta:create_new_device_page frietpantoh:vonets:vonets_vha300 [2018/06/08 22:18] – link fixed, cleanup tmomas
Line 1: Line 1:
 +====== VONETS VHA300 ======
  
 +Vonets VHA300 is a MT6720 SoC based 'baseboard' that is used in several other Vonets devices.
 +It's the board that contains the SoC itself. Depending on the device, other option boards are added that determine the final function of a given device. (Homeplug, Smartplug, measure device, controller, dimmer, switch, etc.)
 +
 +<WRAP BOX>
 +The Vonets VHA300 is not yet supported. There is no ready image available just yet.
 +The manufacturer seems to be using OpenWRT by default for this device <yet to be confirmed>
 +This makes the VHA300 a good candidate to support. 
 +</WRAP>
 +
 +{{media:vonets:vha300:vonets_vha300_pcb.jpg?200|Vonets VHA300}}
 +
 +<WRAP BOX>
 +FIXME
 +===== Getting started with a new Device Page =====
 +  - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.**
 +  - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
 +  - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it.
 +
 +===== Keep the articles modular =====
 +  * Please include only model specific information, omit bla,bla and put everything generic into separate articles
 +  * If you have no time to write certain stuff, link to [[docs:start]]
 +  * [[docs:guide-user:base-system:start]] should lead the way, do not explain this again
 +  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]].
 +</WRAP>
 +
 +===== Supported Versions =====
 +
 +<WRAP BOX>
 +FIXME
 +  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.**
 +  - If the tables below show information //other than// ''<nowiki>VONETS VHA300 </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it.
 +  - If the tables below contain "Nothing found", it means that either
 +    - the dataentry page for VONETS VHA300  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it.
 +    - filters are not set correctly -> Please **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it.
 +  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help.
 +</WRAP>
 +
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c,c
 +filter  : Brand=VONETS
 +filter  : Model=VHA300
 +filter  : Versions~
 +----
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Brand=VONETS
 +filter  : Model=VHA300
 +filter  : Versions~
 +----
 +
 +===== Installation =====
 +  - → [[:downloads|Obtain firmware]]
 +  - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]]
 +
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +align   : c,c,c
 +filter  : Brand=VONETS
 +filter  : Model=VHA300
 +filter  : Versions~
 +----
 +
 +==== Flash Layout ====
 +<WRAP BOX>
 +FIXME //[[docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).//
 +
 +Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout.
 +</WRAP>
 +
 +==== OEM easy installation ====
 +
 +<WRAP BOX>
 +FIXME The instructions below are for Broadcom devices and only serve as an example. Remove / modify them if they do not apply to this particular device!
 +
 +This section deals with
 +  * How you install OpenWrt from a device freshly opened
 +  * The steps required such as reset to factory defaults if the device has already been configured
 +
 +**Note:** Reset router to factory defaults if it has been previously configured.
 +  *Browse to ''%%http://192.168.1.1/Upgrade.asp%%''
 +  *Upload .bin file to router
 +  *Wait for it to reboot
 +  *Telnet to 192.168.1.1 and set a root password, or browse to ''%%http://192.168.1.1%%'' if LuCI is installed.
 +</WRAP>
 +
 +==== OEM installation using the TFTP method ====
 +
 +->  [[docs:guide-user:installation:generic.flashing.tftp]]
 +
 +=== Specific values needed for tftp ===
 +
 +<WRAP BOX>
 +
 +FIXME Enter values for "FILL-IN" below
 +
 +^ Bootloader tftp server IPv4 address  | FILL-IN   |
 +^ Bootloader MAC address (special)     | FILL-IN   |
 +^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) |
 +^ TFTP transfer window                 | FILL-IN seconds                                |
 +^ TFTP window start                    | approximately FILL-IN seconds after power on   |
 +^ TFTP client required IP address      | FILL-IN                                        |
 +
 +</WRAP>
 +
 +===== Upgrading OpenWrt =====
 +->  [[docs:guide-user:installation:generic.sysupgrade]]
 +
 +<WRAP BOX>
 +
 +FIXME These are generic instructions. Update with your router's specifics.
 +
 +==== LuCI Web Upgrade Process ====
 +
 +  * Browse to ''%%http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/%%'' LuCI Upgrade URL
 +  * Upload image file for sysupgrade to LuCI
 +  * Wait for reboot
 +
 +==== Terminal Upgrade Process ====
 +
 +If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line.
 +There are two command line methods for upgrading:
 +
 +  * ''sysupgrade''
 +  * ''mtd''
 +
 +Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
 +
 +=== sysupgrade ===
 +
 +  * Login as root via SSH on 192.168.1.1, then enter the following commands:
 +
 +<code>
 +cd /tmp
 +wget http://http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
 +sysupgrade /tmp/xxx.abc
 +</code>
 +
 +=== mtd ===
 +
 +If ''sysupgrade'' does not support this router, use ''mtd''.
 +
 +  * Login as root via SSH on 192.168.1.1, then enter the following commands:
 +
 +<code>
 +cd /tmp
 +wget http://http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
 +mtd write /tmp/xxx.abc linux && reboot
 +</code>
 +
 +</WRAP>
 +
 +===== Debricking =====
 +-> [[docs:guide-user:troubleshooting:generic.debrick]]
 +
 +===== Failsafe mode =====
 +-> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]]
 +
 +===== Basic configuration =====
 +-> [[docs:guide-quick-start:checks_and_troubleshooting|Basic configuration]] After flashing, proceed with this.\\
 +Set up your Internet connection, configure wireless, configure USB port, etc.
 +
 +===== Specific Configuration =====
 +
 +<WRAP BOX>
 +FIXME Please fill in real values for this device, then remove the EXAMPLEs
 +
 +==== Network interfaces ====
 +The default network configuration is:
 +^ Interface Name   ^ Description                  ^ Default configuration    ^
 +| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   |
 +| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             |
 +| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             |
 +| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         |
 +
 +</WRAP>
 +
 +==== Switch Ports (for VLANs) ====
 +<WRAP BOX>
 +FIXME Please fill in real values for this device, then remove the EXAMPLEs
 +
 +Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.
 +^ Port             ^ Switch port   ^
 +| Internet (WAN)   | EXAMPLE 4     |
 +| LAN 1            | EXAMPLE 3     |
 +| LAN 2            | EXAMPLE 2     |
 +| LAN 3            | EXAMPLE 1     |
 +| LAN 4            | EXAMPLE 0     |
 +
 +</WRAP>
 +
 +==== Buttons ====
 +-> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
 +Here, we merely name the buttons, so we can use them in the above Howto.
 +
 +<WRAP BOX>
 +FIXME Please fill in real values for this device, then remove the EXAMPLEs
 +
 +The VONETS VHA300 has the following buttons:
 +
 +^ BUTTON                       ^ Event   ^
 +| EXAMPLE Reset                |  reset  |
 +| EXAMPLE Secure Easy Setup    |   ses   |
 +| EXAMPLE No buttons at all.      -    |
 +
 +</WRAP>
 +
 +===== Hardware =====
 +==== Info ====
 +<WRAP BOX>
 +FIXME
 +  - This table is automatically generated, **once the correct filters for Brand and Model are set.**
 +  - If you see "Nothing." instead of a table, please **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy.
 +  - If you still don't see a table here, or a table filled with '¿': [[toh:start|Is there already a Techdata page available]] for VONETS VHA300 ? If not: [[meta:create_new_dataentry_page|Create one]].
 +  - If you see a table with the desired device data, everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it.
 +  - If it still doesn't work: Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help.
 +</WRAP>
 +
 +---- datatemplatelist dttpllist ----
 +template: meta:template_datatemplatelist
 +cols    : Brand, Model, Versions, Device Type, Availability, Supported Since Rev, Supported since Rel, Supported current Rel, Instruction Set, Sub Instruction Set, Bootloader, Platform, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_
 +filter  : Brand=VONETS
 +filter  : Model=VHA300
 +----
 +
 +==== Photos ====
 +/* =====>>>>> Standard size for photos: add ?400 to the medialink                                */
 +/* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */
 +/* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}}                                  */
 +/* Thanks, your wiki administration - Oct. 2015 */
 +
 +//Front://\\
 +**Insert photo of front of the casing**
 +
 +//Back://\\
 +**Insert photo of back of the casing**
 +
 +//Backside label://\\
 +**Insert photo of backside label**
 +
 +==== Opening the case ====
 +
 +**Note:** This will void your warranty!
 +
 +<WRAP BOX>
 +FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...//
 +  * To remove the cover and open the device, do a/b/c
 +</WRAP>
 +
 +//Main PCB://\\
 +{{media:vonets:vha300:vonets_vha300_pcb_top.jpg?300|Vonets VHA300 PCB top}}
 +
 +//PCB dimensions://\\
 +{{media:vonets:vha300:vonets_vha300_size_side.png
 +?110|Vonets VHA300 dimensions side}}
 +{{media:vonets:vha300:vonets_vha300_size_top.png
 +?300|Vonets VHA300 dimensions top}}
 +==== Serial ====
 +-> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
 +
 +How to connect to the Serial Port of this specific device:\\
 +**Insert photo of PCB with markings for serial port**
 +
 +<WRAP BOX>
 +FIXME //Replace EXAMPLE by real values.//
 +</WRAP>
 +
 +^ Serial connection parameters\\ for VONETS VHA300 @@Version@@ | EXAMPLE 115200, 8N1 |
 +
 +==== JTAG ====
 +-> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
 +
 +How to connect to the JTAG Port of this specific device:\\
 +**Insert photo of PCB with markings for JTAG port**
 +
 +===== Bootloader Mods =====
 +
 +Currently none.
 +
 +===== Hardware mods =====
 +
 +Currently none.
 +
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +
 +<WRAP bootlog>
 +<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>
 +</WRAP>\\
 +
 +==== OpenWrt bootlog ====
 +
 +<WRAP bootlog>
 +<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>
 +</WRAP>\\
 +
 +===== Notes =====
 +
 +  * [[http://www.vonets.com/download/VHA300/VHA300_1V0_Smart%20Home%20WiFi%20Module%20Specification.pdf|Vonets VHA300 1V0 Smart Home WiFi Module Specifications.pdf]]
 +  * [[http://www.vonets.com/download/VSeries/Firmware%20Upgrade%20Guide.pdf|Firmware Upgrade Guide.pdf]]
 +  * [[http://www.vonets.com/download/VSeries/V%20Series%20-%20Upgrading%20Course.pdf|V Series - Upgrading Course.pdf]]
 +  * [[http://www.vonets.com/download/VHA300/VHA300_1V0_WiFi_Switch_Application.pdf|VHA300 1V0 WiFi Switch Application.pdf]]
 +  * [[http://www.vonets.com//download/OpenWrt/MTK-OpenWrt-2.6.36.1-SDK-Release%20Notes.pdf|MTK-OpenWrt-2.6.36.1-SDK-Release%20Notes.pdf]]
 +  * [[http://www.vonets.com//download/OpenWrt/Openwrt%20for%20vonets_MT7620%20Build%20compilation%20environment.pdf|Openwrt for vonets_MT7620 Build compilation environment.pdf]]
 +  * [[http://www.vonets.com/download/OpenWrt/vonets_openwrt_7620_SDK_2.6.36.1.rar|vonets_openwrt_7620_SDK_2.6.36.1.rar]]
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +
 +<WRAP BOX>
 +FIXME //Adjust the list of tags below to this device, then remove this fixme.//
 +</WRAP>
 +
 +{{tag>GigabitEthernet FastEthernet 1NIC 1WNIC 5Port USB 2USB ath9k DetachableAntenna 32RAM 8Flash MIPS MIPS32 34K}}
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1