User Tools

Site Tools


toh:unielec:u7621-06

Unielec U7621-06

Unielec U7621-06 The UniElec model U7621-06 is a router with 4 gigabit LAN ports, 1 gigabit WAN port, and up to 2 wifi radios and LTE modem possibility. The platform is very flexible. It can be ordered with wifi card or without it. Board have multiple gpio and two GPLED.


Hardware Information

Hardware Highlights

ModelVersionSoCCPU MHzFlash MBRAM MBWireless LAN HardwareWireless 2.4GHzWireless 5.0GHz100M portsGbit portsModemUSB
U7621-06256M/16MMediaTek MT7621AT88016, microSD2562x mini-PCIe¿¿-5-1x 3.0, 1x Device

Hardware Details

Hardware Details for UniElec U7621-06 256M/16M
Device Type WiFi Router
Availability Available 2018
Comments - general The manufacturer offers five different wireless cards with MediaTek chipsets, based on MT76x2, MT7603 and MT7615. Images of the board all show that the miniPCIe slots are dedicated to specific Wi-Fi cards. However, the slots are generic.
OpenWrt Support
Supported Since Revision
Supported Since Release 18.06.0
Supported Current Release 18.06.1
Unsupported
Hardware
Sub Instruction Set ¿
Bootloader Breed
Target ramips
System-On-Chip
CPU MHz 880
Flash MB 16, microSD
RAM MB 256
Network
Ethernet 100M ports -
Ethernet Gbit ports 5
switch MediaTek MT7621AT
Modem -
VLAN Yes
Comments - network ports
Wireless
WLAN 2.4GHz ¿
WLAN 5.0GHz ¿
WLAN Hardware
Detachable Antennas ¿
Comments - WLAN
Interfaces
USB ports 1x 3.0, 1x Device
SATA ports 2
Serial Yes
JTAG ¿
Comments - USB & SATA ports 1x msata slot with USB
Misc
LED count 12
Button count 1
Power supply
Links
Forum Topic URL
WikiDevi URL https://wikidevi.com/wiki/UniElec_U7621-06
OEM device homepage URL http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=pyrEjfTmYf
Firmware OEM Stock URL
Firmware OpenWrt Install URL
Firmware OpenWrt Upgrade URL http://downloads.openwrt.org/releases/18.06.1/targets/ramips/mt7621/openwrt-18.06.1-ramips-mt7621-u7621-06-256M-16M-squashfs-sysupgrade.bin
Edit the underlying data View/Edit data

Getting and Flashing Firmware

This board might come with a different firmware versions (MediaTek SDK, PandoraBox, Padavan, etc.). If your board comes with PandoraBox, you can install OpenWrt using sysupgrade. Just SSH to the router and perform forced sysupgrade (due to a board name mismatch). The default IP of this board should be: 192.168.1.1 and username/password: root/admin. In case of a different firmware, you can use web based recovery described below.

Use the following command to perform the sysupgrade (for the 256MB RAM/16MB flash version):

sysupgrade -n -F openwrt-ramips-mt7621-u7621-06-256M-16M-squashfs-sysupgrade.bin 

Troubleshooting/Unbricking

Flash layout

The Stock PandorraBox Flash layout is:

Unielec U7621-06 Stock Flash Layout
Layer0 MX25L12805D fullflash (mtdblock3) 16384KiB
Layer1 mtdblock0
u-boot
192KiB
mtdblock1
u-boot-env
64KiB
mtdblock2
Factory
64KiB
mtdblock4
firmware
16064KiB
Layer2 mtdblock5
Kernel
mtdblock6
RootFS
mtdblock8
panic_oops
64KiB
Layer3
SquashFS
mtdblock7
RootFS_data

The OpenWrt Flash layout is:

Unielec U7621-06 OpenWrt Flash Layout
Layer0 MX25L12805D (mtd0) 16384KiB
Layer1 mtdblock0
bootloader
192KiB
mtdblock1
config
64KiB
mtdblock2
factory
64KiB
mtdblock3
firmware
16064KiB
Layer2 mtdblock4
Kernel
mtdblock5
RootFS
Layer3
SquashFS
mtdblock6
RootFS_data

Other Information about the Device

Network interfaces

The default network configuration is:

Interface Name Description Default configuration
br-lan LAN & WiFi 192.168.1.1/24
vlan1 (eth0.1) LAN ports (1 to 4) None
vlan2 (eth0.2) WAN port DHCP
wlan0 WiFi (if mounted) Disabled
wlan1 WiFi (if mounted) Disabled

Buttons

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

The Unielec U7621-06 has the following buttons:

BUTTON Event GPIO
Reset reset 18

Serial

port.serial general information about the serial port, serial port cable, etc.

J4 connector:

Pin Function
1 Vcc (~3.3V)
2 RX
3 TX
4 GND
Serial connection parameters
for Unielec U7621-06
115200, 8N1

LEDs

The Unielec U7621-06 has the following LEDs:

unielec_u7621-06_leds.jpg

LED NO Function GPIO
1 LED_WWAN# pin 42 in LTE/mSATA slot
2 Power directly to 3V3
3 Status GPIO10
4 LED4 (*) GPIO11
5 LED5 (*) GPIO12
6 LED_WLAN0# pin 44 in wifi0 slot
7 ESW_P0_LED_0 -
8 ESW_P1_LED_0 -
9 ESW_P2_LED_0 -
10 ESW_P3_LED_0 -
11 ESW_P4_LED_0 -
12 LED_WLAN1# pin 44 in wifi1 slot

(*) Some boards have swaped Cathode and Anode of LED. If LED4 or LED5 not work, LED polarization is wrong. The only way is resolder the LED and swap Cathode and Anode.

GPIOs

J10 connector:

Pin GPIO Pin GPIO
1 Vcc (~3.3V) 2 GND
3 GPIO3 4 GPIO4
5 GND 6 GPIO6
7 GPIO7 8 GPIO8
9 GPIO13 10 GPIO14
11 GPIO15 12 GPIO16
13 Vcc (~3.3V) 14 GND
15 GPIO20 16 GPIO21
17 GPIO22 18 GPIO23
19 GPIO24 20 GPIO25
21 GPIO26 22 GPIO27
23 GPIO28 24 GPIO29
25 GPIO30 26 GPIO31
27 GPIO32 28 GPIO33
29 GPIO4 30 GPIO3

Photos

Front and Back view:

unielec_u7621-06_front.jpg unielec_u7621-06_rear.jpg

PCB:

unielec_u7621-06_pcb_top.jpg unielec_u7621-06_pcb_bot.jpg

Boot Logs

Stock Bootlog
mPCIE WIFI cards MT7602 and MT7612 installed.
Boot and Recovery Environment for Embedded Devices
Copyright (C) 2015 HackPascal <hackpascal@gmail.com>
Build date 2015-10-18 [git-bb5218f]
Version 1.0 (r777)

DRAM: 256MB
Platform: MediaTek MT7621A ver 1, eco 3
Board: Newifi D1
Clocks: CPU: 880MHz, DDR: 1066MHz, Bus: 220MHz, Ref: 40MHz
Flash: Macronix MX25L12835E (16MB) on rt6855a-spi
rt2880-eth: MAC address from EEPROM is invalid, using default settings.
rt2880-eth: Using MAC address 00:0c:43:00:00:01
eth0: MediaTek MT7530 Gigabit switch

Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

Press any key to interrupt autoboot ... 0

Trying to boot firmware from 0x00050000 in flash bank 0 ...
Reading data into memory ...
U-Boot firmware image header detected.
    Image Name:   PabdoraBox Linux-3.14.48
    Data Size:    1240259 Bytes
    Load Address: 80001000
    Entry Point:  80001000
Uncompressing data (LZMA) ... done.
Flushing cache ... done.

Starting kernel at 0x80001000...


PandoraBox For Ralink/MTK APSoC. Copyright 2013-2014 D-Team Technology SZ


LINUX started...

 THIS IS ASIC
[    0.000000] Linux version 3.14.48 (lintel@PandoraBox-Server) (gcc version 4.8.3 (PandoraBox/Linaro GCC 4.8-2014.04 r972) ) #8 SMP Tue Jul 14 14:56:52 CST 2015
[    0.000000] MT7621: MPLL enabled.
[    0.000000] PandoraBox CPUID Module for Ralink/MTK SoC v1.1.
[    0.000000] MediaTek MT7621 pkg:BGA rev:1 eco:3 CPU:880MHz, Bus:220MHz Uart:50MHz
[    0.000000] CPU running in Little Endian
[    0.000000] Board VLAN:LLLLW
[    0.000000] Flash:SPI Size: 16MB
[    0.000000] DRAM: 256MB DDR3 16 bits
[    0.000000] Kernel Support [PCI] [USB]
[    0.000000] prom memory:256MB
[    0.000000] GCMP present
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] Software DMA cache coherency
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x0fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x0fffffff]
[    0.000000] Detected 3 available secondary CPU(s)
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] PERCPU: Embedded 7 pages/cpu @81203000 s5696 r8192 d14784 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: pause_on_oops=10 noresume  board=PBR-M1 console=ttyS1,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Writing ErrCtl register=00070854
[    0.000000] Readback ErrCtl register=00070854
[    0.000000] Memory: 255836K/262144K available (2736K kernel code, 135K rwdata, 516K rodata, 184K init, 289K bss, 6308K reserved, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] GIC: Revision 3.0
[    0.000000] Setup MT7621 IRQs...Done
[    0.000000] console [ttyS1] enabled
[    0.000000] console [ttyS1] enabled
[    0.000000] bootconsole [early0] disabled
[    0.000000] bootconsole [early0] disabled
[    0.010000] Calibrating delay loop... 580.40 BogoMIPS (lpj=2902016)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] CPU1 :Booting up...done!
[    0.090000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.090000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.090000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.150000] Synchronize counters for CPU 1: done.
[    0.160000] CPU2 :Booting up...done!
[    0.160000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.160000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.160000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.160000] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.220000] Synchronize counters for CPU 2: done.
[    0.230000] CPU3 :Booting up...done!
[    0.230000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.230000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.230000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.230000] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.280000] Synchronize counters for CPU 3: done.
[    0.300000] Brought up 4 CPUs
[    0.300000] pinctrl core: initialized pinctrl subsystem
[    0.310000] NET: Registered protocol family 16
[    0.310000] Ralink/MTK BootROM maped.
[    0.320000] Generic GPIO Driver for MediaTek MT7621 Board. (c) 2013-2015 PandoraBox Team
[    0.320000] MT7621-GPIO0:registering 32 irq handlers
[    0.330000] MT7621-GPIO1:registering 32 irq handlers
[    0.330000] MT7621-GPIO3:registering 32 irq handlers
[    0.340000] MIPS: machine is PandoraBox PBR-M1
[    0.340000] ralink_register_flash:SPI Flash.
[    0.340000] MT762x:SDHC Interface registered.
[    0.350000] Ralink/MTK PinCtrl registered.
[    0.350000] Generic PinCtrl Driver for MediaTek MT7621 Board. (c) 2013-2015 PandoraBox Team
[    0.360000] PINCTRL:add 31 pins for MT7621-PINCTRL0.
[    0.360000] PINCTRL:add 31 pins for MT7621-PINCTRL1.
[    0.370000] PINCTRL:add 31 pins for MT7621-PINCTRL2.
[    0.370000] GPIO_MODE_REG:0x95B8
[    1.760000] PCIE0 enabled
[    1.760000] PCIE1 enabled
[    1.770000] PCIE2 enabled
[    1.780000] bio: create slab <bio-0> at 0
[    1.780000] PCI host bridge to bus 0000:00
[    1.790000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.790000] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    1.800000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.800000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.810000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.810000] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.820000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
[    1.820000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
[    1.830000] pci 0000:00:02.0: BAR 0: can't assign mem (size 0x80000000)
[    1.830000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    1.840000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    1.840000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    1.850000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    1.850000] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
[    1.860000] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
[    1.860000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
[    1.870000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
[    1.870000] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
[    1.880000] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    1.880000] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    1.890000] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
[    1.890000] pci 0000:01:00.0: BAR 4: assigned [io  0x1e160000-0x1e16001f]
[    1.900000] pci 0000:01:00.0: BAR 0: assigned [io  0x1e160020-0x1e160027]
[    1.900000] pci 0000:01:00.0: BAR 2: assigned [io  0x1e160028-0x1e16002f]
[    1.910000] pci 0000:01:00.0: BAR 1: assigned [io  0x1e160030-0x1e160033]
[    1.910000] pci 0000:01:00.0: BAR 3: assigned [io  0x1e160034-0x1e160037]
[    1.920000] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.920000] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    1.930000] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    1.930000] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    1.940000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
[    1.940000] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref]
[    1.950000] pci 0000:00:01.0: PCI bridge to [bus 02]
[    1.950000] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    1.960000] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    1.960000] pci 0000:03:00.0: BAR 0: assigned [mem 0x60400000-0x604fffff 64bit]
[    1.970000] pci 0000:03:00.0: BAR 6: assigned [mem 0x60500000-0x6050ffff pref]
[    1.970000] pci 0000:00:02.0: PCI bridge to [bus 03]
[    1.980000] pci 0000:00:02.0:   bridge window [mem 0x60400000-0x604fffff]
[    1.980000] pci 0000:00:02.0:   bridge window [mem 0x60500000-0x605fffff pref]
[    1.990000] PCI Bus 1 slot 0 mapping to IRQ4.
[    1.990000] PCI Bus 2 slot 1 mapping to IRQ24.
[    1.990000] PCI Bus 3 slot 2 mapping to IRQ25.
[    2.000000] Switched to clocksource MIPS
[    2.000000] NET: Registered protocol family 2
[    2.010000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    2.010000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    2.020000] TCP: Hash tables configured (established 2048 bind 2048)
[    2.030000] TCP: reno registered
[    2.030000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.040000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.040000] NET: Registered protocol family 1
[    2.050000] Ralink SoC clocks api init.
[    2.050000] mips hpt frequency:440000000HZ
[    2.290000] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    2.300000] Ralink/MTK APSoC GPIO Resource maped.
[    2.310000] PandoraBox USB OverCharged driver (c) 2013-2015 PandoraBox Team
[    2.310000] usb-oc:enable USB2_PWR_CTRL port power
[    2.320000] usb-oc:enable USB3_PWR_CTRL port power
[    2.320000] usb-oc:enable SATA3_PWR_CTRL port power
[    2.330000] Load Kernel WDG Timer Module
[    2.330000] Load Ralink Timer0 Module
[    2.330000] Load Ralink Timer2 Module
[    2.340000] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    2.350000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.350000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.360000] msgmni has been set to 499
[    2.370000] io scheduler noop registered (default)
[    2.370000] io scheduler deadline registered
[    2.380000] io scheduler cfq registered
[    2.380000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    2.390000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27, base_baud = 3125000) is a 16550A
[    2.400000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26, base_baud = 3125000) is a 16550A
[    2.410000] serial8250: ttyS2 at MMIO 0x1e000e00 (irq = 28, base_baud = 3125000) is a 16550A
[    2.410000] Enable Ralink GDMA Controller Module
[    2.420000] GDMA IP Version=3
[    2.430000] brd: module loaded
[    2.440000] flash manufacture id: c2, device id 20 18
[    2.440000] MX25L12805D(c2 2018c220) (16384 Kbytes)
[    2.450000] mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
[    2.460000] Creating 5 MTD partitions on "raspi":
[    2.460000] 0x000000000000-0x000000030000 : "u-boot"
[    2.470000] 0x000000030000-0x000000040000 : "u-boot-env"
[    2.470000] 0x000000040000-0x000000050000 : "Factory"
[    2.480000] 0x000000000000-0x000001000000 : "fullflash"
[    2.490000] 0x000000050000-0x000001000000 : "firmware"
[    2.520000] 3 uimage-fw partitions found on MTD device firmware
[    2.530000] 0x000000050000-0x00000017ed03 : "kernel"
[    2.530000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    2.550000] 0x00000017ed03-0x000000fe0000 : "rootfs"
[    2.550000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    2.560000] mtd: device 6 (rootfs) set to be root filesystem
[    2.570000] 1 squashfs-split partitions found on MTD device rootfs
[    2.580000] 0x000000ec0000-0x000000fe0000 : "rootfs_data"
[    2.580000] 0x000000fe0000-0x000001000000 : "panic_oops"
[    2.590000] mtdoops: Attached to MTD device 8
[    2.590000] rdm_major = 252
[    2.600000] raeth: frame engine reset
[    2.600000] raeth: embedded switch reset
[    2.610000] EEPROM:Read from [Factory] offset 0xe000,length 0x6.
[    2.620000] fixing up MHWTRAP register - bootloader probably played with it
[    2.620000] mt762x-gsw switch driver registered
[    2.630000] mt762x-gsw default vlans:wllll
[    2.640000] Ralink APSoC Ethernet Driver v3.2.1 (raeth)
[    2.640000] raeth: PDMA RX ring 256, QDMA TX pool 512. Max packet size 1536
[    2.650000] TCP: cubic registered
[    2.650000] TCP: westwood registered
[    2.660000] TCP: hybla registered
[    2.660000] TCP: htcp registered
[    2.660000] NET: Registered protocol family 17
[    2.670000] Bridge firewalling registered
[    2.670000] Ebtables v2.0 registered
[    2.680000] 8021q: 802.1Q VLAN Support v1.8
[    2.680000] PandoraBox Mass Storage accelerater v1.2
[    2.690000] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[    2.700000] Freeing unused kernel memory: 184K (80352000 - 80380000)
[    3.700000] init: Console is alive
[    6.720000] random: nonblocking pool is initialized
[    7.810000] usbcore: registered new interface driver usbfs
[    7.810000] usbcore: registered new interface driver hub
[    7.820000] usbcore: registered new device driver usb
[    7.830000] exFAT: Version 1.2.9
[    7.890000] ufsd: module license 'Commercial product' taints kernel.
[    7.890000] Disabling lock debugging due to kernel taint
[    7.910000] ufsd: driver (8.6, Jul 14 2015 13:33:12, LBD=ON, delalloc, ioctl, bdi) loaded at c043e000
[    7.910000] NTFS (with native replay) support included
[    7.910000] optimized: speed
[    7.910000] Built for PandoraBox 2013-12-27
[    7.910000]
[    7.930000] PandoraBox Button Driver init
[    7.940000] Button [reset] mapped to GPIO18 and IRQ67
[    7.950000] SCSI subsystem initialized
[    7.970000] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    7.980000] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    7.990000] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[    8.000000] scsi0 : ahci
[    8.000000] scsi1 : ahci
[    8.000000] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 4
[    8.010000] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 4
[    8.390000] ata1: SATA link down (SStatus 0 SControl 300)
[    8.740000] ata2: SATA link down (SStatus 0 SControl 300)
[    8.860000] MT7621 XHCI/EHCI Frequency Calibration start!
[    8.880000] FM_OUT value: u4FmOut = 0(0x00000000)
[    8.900000] FM_OUT value: u4FmOut = 289(0x00000121)
[    8.900000] FM detection done! loop = 1
[    8.920000] SR calibration value u1SrCalVal = 2
[    8.920000] MT7621 XHCI/EHCI Frequency Calibration start!
[    8.940000] FM_OUT value: u4FmOut = 283(0x0000011B)
[    8.940000] FM detection done! loop = 0
[    8.960000] SR calibration value u1SrCalVal = 3
[    8.960000] xhci-hcd xhci-hcd: xHCI Host Controller
[    8.960000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
[    8.970000] xhci-hcd xhci-hcd: irq 22, io mem 0x1e1c0000
[    8.980000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    8.990000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.990000] usb usb1: Product: xHCI Host Controller
[    9.000000] usb usb1: Manufacturer: Linux 3.14.48 xhci-hcd
[    9.000000] usb usb1: SerialNumber: xhci-hcd
[    9.010000] hub 1-0:1.0: USB hub found
[    9.010000] hub 1-0:1.0: 2 ports detected
[    9.020000] xhci-hcd xhci-hcd: xHCI Host Controller
[    9.020000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
[    9.030000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    9.040000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.040000] usb usb2: Product: xHCI Host Controller
[    9.050000] usb usb2: Manufacturer: Linux 3.14.48 xhci-hcd
[    9.050000] usb usb2: SerialNumber: xhci-hcd
[    9.060000] hub 2-0:1.0: USB hub found
[    9.060000] hub 2-0:1.0: 1 port detected
[    9.120000] mtk-sd: MediaTek MT76xx MSDC Driver
[    9.130000] usbcore: registered new interface driver usb-storage
[    9.820000] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   13.230000] mount_root: loading kmods from internal overlay
[   13.640000] jffs2: notice: (358) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 61 of xref (0 dead, 25 orphan) found.
[   13.660000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   13.670000] block: unable to load configuration (fstab: Entry not found)
[   13.680000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[   13.680000] block: extroot: not configured
[   13.760000] jffs2: notice: (355) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 61 of xref (0 dead, 25 orphan) found.
[   14.010000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   14.010000] block: unable to load configuration (fstab: Entry not found)
[   14.020000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[   14.030000] block: extroot: not configured
[   14.090000] mount_root: switching to jffs2 overlay
[   14.100000] procd: - early -
Failed to connect to ubus
[   14.870000] procd: - ubus -
Failed to connect to ubus
[   15.880000] procd: - init -
Please press Enter to activate this console.
[   17.320000] NET: Registered protocol family 10
[   17.340000] NET: Registered protocol family 8
[   17.340000] NET: Registered protocol family 20
[   17.350000] Key type dns_resolver registered
[   17.370000] RPC: Registered named UNIX socket transport module.
[   17.370000] RPC: Registered udp transport module.
[   17.380000] RPC: Registered tcp transport module.
[   17.380000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.430000] tun: Universal TUN/TAP device driver, 1.6
[   17.440000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   17.450000] l2tp_core: L2TP core driver, V2.0
[   17.450000] l2tp_netlink: L2TP netlink interface
[   17.470000] gre: GRE over IPv4 demultiplexor driver
[   17.470000] ip_gre: GRE over IPv4 tunneling driver
[   17.560000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   17.560000] gpiodev: gpio device registered with major 251
[   17.580000] PPP generic driver version 2.4.2
[   17.590000] nf_conntrack version 0.5.0 (4000 buckets, 16000 max)
[   17.600000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.620000] Netfilter messages via NETLINK v0.30.
[   17.630000] ip_set: protocol 6
[   17.670000] Ralink/MTK i2c driver load.
[   17.680000] Ralink/MTK i2c bus registered.
[   17.710000] Linux video capture interface: v2.00
[   17.720000] hidraw: raw HID events driver (C) Jiri Kosina
[   17.750000] u32 classifier
[   17.750000]     input device check on
[   17.750000]     Actions configured
[   17.760000] Mirror/redirect action on
[   17.790000] fuse init (API version 7.22)
[   17.800000] PandoraBox IP Bandwidth load.
[   18.190000] PandoraBox MT76x2E AP Driver version-3.0.4.0(Jul 14 2015 13:33:29).
[   18.280000] PandoraBox MT76x2E AP Driver version-3.0.4.0(Jul 14 2015 13:33:29).
[   18.330000] arp_tables: (C) 2002 David S. Miller
[   18.340000] cm109: Keymap for Komunikate KIP1000 phone loaded
[   18.350000] usbcore: registered new interface driver cm109
[   18.360000] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[   18.370000] Loading modules backported from Linux version master-2015-06-22-0-g4732c92
[   18.370000] Backport generated by backports.git backports-20150626-0-gc1a4168
[   18.390000] gspca_main: v2.14.0 registered
[   18.400000] usbcore: registered new interface driver gspca_zc3xx
[   18.410000] ip_tables: (C) 2000-2006 Netfilter Core Team, NAT Type:Symmetric Cone
[   18.590000] PPP MPPE Compression module registered
[   18.590000] NET: Registered protocol family 24
[   18.600000] PPTP driver version 0.8.5
[   18.610000] usbcore: registered new interface driver Philips webcam
[   18.620000] rtc-pcf8563 0-0051: chip found, driver version 0.4.3
[   18.620000] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
[   18.630000] rtc-pcf8563 0-0051: retrieved date/time is not valid.
[   18.640000] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[   18.660000] usbcore: registered new interface driver ums-alauda
[   18.660000] usbcore: registered new interface driver ums-cypress
[   18.670000] usbcore: registered new interface driver ums-datafab
[   18.680000] usbcore: registered new interface driver ums-freecom
[   18.690000] usbcore: registered new interface driver ums-isd200
[   18.700000] usbcore: registered new interface driver ums-jumpshot
[   18.710000] usbcore: registered new interface driver ums-karma
[   18.720000] usbcore: registered new interface driver ums-sddr09
[   18.730000] usbcore: registered new interface driver ums-sddr55
[   18.730000] usbcore: registered new interface driver ums-usbat
[   18.750000] usbcore: registered new interface driver usbhid
[   18.750000] usbhid: USB HID core driver
[   18.760000] usbcore: registered new interface driver usblp
[   18.780000] usbcore: registered new interface driver usbserial
[   18.790000] usbcore: registered new interface driver usbserial_generic
[   18.790000] usbserial: USB Serial support registered for generic
[   18.810000] usbcore: registered new interface driver uvcvideo
[   18.820000] USB Video Class driver (1.1.1)
[   18.820000] Driver for 1-wire Dallas network protocol.
[   18.860000] xt_time: kernel timezone is -0000
[   18.920000] cfg80211: Calling CRDA to update world regulatory domain
[   18.930000] cfg80211: World regulatory domain updated:
[   18.940000] cfg80211:  DFS Master region: unset
[   18.940000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   18.950000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   18.960000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   18.970000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   18.970000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   18.980000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   18.990000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   19.000000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   19.010000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   19.020000] usbcore: registered new interface driver ch341
[   19.020000] usbserial: USB Serial support registered for ch341-uart
[   19.030000] usbcore: registered new interface driver cp210x
[   19.040000] usbserial: USB Serial support registered for cp210x
[   19.050000] usbcore: registered new interface driver dm9601
[   19.050000] usbcore: registered new interface driver ftdi_sio
[   19.060000] usbserial: USB Serial support registered for FTDI USB Serial Device
[   19.070000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   19.160000] usbcore: registered new interface driver pl2303
[   19.170000] usbserial: USB Serial support registered for pl2303
[   19.210000] usbcore: registered new interface driver sierra
[   19.210000] usbserial: USB Serial support registered for Sierra USB modem
[   19.230000] usbcore: registered new interface driver snd-usb-audio
[   19.290000] usbcore: registered new interface driver brcmfmac
[   19.300000] usbcore: registered new interface driver option
[   19.310000] usbserial: USB Serial support registered for GSM modem (1-port)
[   19.320000] usbcore: registered new interface driver qcserial
[   19.320000] usbserial: USB Serial support registered for Qualcomm USB modem
[   19.340000] usbcore: registered new interface driver rt2800usb
[   19.380000] usbcore: registered new interface driver ath9k_htc
[   19.390000] usbcore: registered new interface driver rtl8192cu
[   23.790000] raeth: frame engine reset
[   23.800000] raeth: HW VLAN RX offload enabled
[   23.800000] raeth: HW VLAN TX offload enabled
[   23.810000] raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
[   23.820000] raeth: HW Scatter/Gather TX offload enabled
[   23.830000] device eth0.1 entered promiscuous mode
[   23.830000] device eth0 entered promiscuous mode
[   23.840000] br-lan: port 1(eth0.1) entered forwarding state
[   23.850000] br-lan: port 1(eth0.1) entered forwarding state
[   24.530000] EEPROM:Read from [Factory] offset 0x0,length 0x200.
[   24.600000] EEPROM:Read from [Factory] offset 0x0,length 0x200.
[   25.850000] br-lan: port 1(eth0.1) entered forwarding state
[   29.820000] MT76x2E Fast Mode init.
[   29.840000] EEPROM:Read from [Factory] offset 0x8000,length 0x200.
[   29.920000] EEPROM:Read from [Factory] offset 0x8000,length 0x200.
[   31.360000] MT76x2E Fast Mode init.
[   31.390000] device ra0 entered promiscuous mode
[   31.390000] br-lan: port 2(ra0) entered forwarding state
[   31.400000] br-lan: port 2(ra0) entered forwarding state
[   31.430000] device rai0 entered promiscuous mode
[   31.430000] br-lan: port 3(rai0) entered forwarding state
[   31.440000] br-lan: port 3(rai0) entered forwarding state
[   32.370000] PandoraBox IP bandwidth unload.
[   32.390000] PandoraBox IP Bandwidth load.
[   33.400000] br-lan: port 2(ra0) entered forwarding state
[   33.440000] br-lan: port 3(rai0) entered forwarding state

PandoraBox_8092 login: root
Password: admin


BusyBox v1.22.1 (2015-07-13 22:20:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.


  _______________________________________________________________
 |    ____                 _                 ____               |
 |   |  _ \ __ _ _ __   __| | ___  _ __ __ _| __ )  _____  __   |
 |   | |_) / _` | '_ \ / _` |/ _ \| '__/ _` |  _ \ / _ \ \/ /   |
 |   |  __/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) >  <    |
 |   |_|   \__,_|_| |_|\__,_|\___/|_|  \__,_|____/ \___/_/\_\   |
 |                                                              |
 |                  PandoraBox SDK Platform                     |
 |                  The Core of SmartRouter                     |
 |       Copyright 2013-2015 D-Team Technology Co.,Ltd.SZ       |
 |                http://www.pandorabox.org.cn                  |
 |______________________________________________________________|
  Base on OpenWrt BARRIER BREAKER (14.09, r1180)
[root@PandoraBox_8092:/root]#
OpenWrt Bootlog
mPCIE WIFI cards MT7602 and MT7612 installed.
[    0.000000] Linux version 4.9.87 (xxxx@yyyy) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6503-13e800d9e0) ) #0 SMP Thu Mar 29 09:57:40 2018
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is UniElec U7621-06 (256M RAM/16M flash)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat 804de4c0, node_mem_map 81003000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] percpu: Embedded 12 pages/cpu @8120f000 s17744 r8192 d23216 u49152
[    0.000000] pcpu-alloc: s17744 r8192 d23216 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Writing ErrCtl register=00070854
[    0.000000] Readback ErrCtl register=00070854
[    0.000000] Memory: 254088K/262144K available (3879K kernel code, 216K rwdata, 888K rodata, 252K init, 267K bss, 8056K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.007805] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.070431] pid_max: default: 32768 minimum: 301
[    0.075173] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.081699] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    8.671827] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    8.671840] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    8.671853] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    8.672026] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.177584] Synchronize counters for CPU 1:
[    0.177586] done.
[    2.499546] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    2.499555] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    2.499564] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    2.499654] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.269609] Synchronize counters for CPU 2:
[    0.269610] done.
[    8.032264] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    8.032271] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    8.032280] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    8.032381] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.354778] Synchronize counters for CPU 3:
[    0.354779] done.
[    0.361017] Brought up 4 CPUs
[    0.367861] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.377647] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    0.383915] pinctrl core: initialized pinctrl subsystem
[    0.389744] NET: Registered protocol family 16
[    0.404135] FPU Affinity set after 11720 emulations
[    0.449522] pull PCIe RST: RALINK_RSTCTRL = 4000000
[    0.754726] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.759772] ***** Xtal 40MHz *****
[    0.763131] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.768230] Port 0 N_FTS = 1b102800
[    0.771701] Port 1 N_FTS = 1b102800
[    0.775138] Port 2 N_FTS = 1b102800
[    1.930130]  -> 21007f2
[    1.932482] PCIE0 enabled
[    1.935092] PCIE1 enabled
[    1.937666] PCIE2 enabled
[    1.940265] PCI host bridge /pcie@1e140000 ranges:
[    1.945028]  MEM 0x0000000060000000..0x000000006fffffff
[    1.950214]   IO 0x000000001e160000..0x000000001e16ffff
[    1.955382] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    1.994070] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    1.999980] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.005742] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.012808] PCI host bridge to bus 0000:00
[    2.016838] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.023680] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    2.029524] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    2.036280] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.044174] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    2.044206] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.044218] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    2.044284] pci 0000:00:00.0: supports D1
[    2.044293] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.044540] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    2.044563] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.044577] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    2.044626] pci 0000:00:01.0: supports D1
[    2.044636] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    2.044837] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400
[    2.044865] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.044877] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    2.044925] pci 0000:00:02.0: supports D1
[    2.044934] pci 0000:00:02.0: PME# supported from D0 D1 D3hot
[    2.045174] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.053090] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.061015] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.069175] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
[    2.069216] pci 0000:01:00.0: reg 0x10: [io  0x0000-0x0007]
[    2.069232] pci 0000:01:00.0: reg 0x14: [io  0x0000-0x0003]
[    2.069249] pci 0000:01:00.0: reg 0x18: [io  0x0000-0x0007]
[    2.069266] pci 0000:01:00.0: reg 0x1c: [io  0x0000-0x0003]
[    2.069282] pci 0000:01:00.0: reg 0x20: [io  0x0000-0x001f]
[    2.069298] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[    2.069314] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.069582] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.069766] pci 0000:02:00.0: [14c3:7612] type 00 class 0x028000
[    2.069804] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    2.069849] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.069941] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    2.070118] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    2.070299] pci 0000:03:00.0: [14c3:7602] type 00 class 0x028000
[    2.070335] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    2.070381] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.070470] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    2.070672] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[    2.070691] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[    2.070773] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    2.077285] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.084225] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.090759] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.097689] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
[    2.104240] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.111168] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.117895] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    2.125078] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    2.131801] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    2.138988] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
[    2.145716] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
[    2.152899] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
[    2.159626] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
[    2.166380] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
[    2.173105] pci 0000:00:00.0: BAR 7: no space for [io  size 0x1000]
[    2.179334] pci 0000:00:00.0: BAR 7: failed to assign [io  size 0x1000]
[    2.185901] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    2.193076] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
[    2.199800] pci 0000:01:00.0: BAR 4: no space for [io  size 0x0020]
[    2.206031] pci 0000:01:00.0: BAR 4: failed to assign [io  size 0x0020]
[    2.212584] pci 0000:01:00.0: BAR 0: no space for [io  size 0x0008]
[    2.218818] pci 0000:01:00.0: BAR 0: failed to assign [io  size 0x0008]
[    2.225374] pci 0000:01:00.0: BAR 2: no space for [io  size 0x0008]
[    2.231605] pci 0000:01:00.0: BAR 2: failed to assign [io  size 0x0008]
[    2.238161] pci 0000:01:00.0: BAR 1: no space for [io  size 0x0004]
[    2.244392] pci 0000:01:00.0: BAR 1: failed to assign [io  size 0x0004]
[    2.250945] pci 0000:01:00.0: BAR 3: no space for [io  size 0x0004]
[    2.257179] pci 0000:01:00.0: BAR 3: failed to assign [io  size 0x0004]
[    2.263736] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.268676] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.275401] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    2.282591] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
[    2.289841] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref]
[    2.297012] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.301922] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    2.308675] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    2.315842] pci 0000:03:00.0: BAR 0: assigned [mem 0x60400000-0x604fffff 64bit]
[    2.323120] pci 0000:03:00.0: BAR 6: assigned [mem 0x60500000-0x6050ffff pref]
[    2.330260] pci 0000:00:02.0: PCI bridge to [bus 03]
[    2.335201] pci 0000:00:02.0:   bridge window [mem 0x60400000-0x604fffff]
[    2.341925] pci 0000:00:02.0:   bridge window [mem 0x60500000-0x605fffff pref]
[    2.349133] BAR0 at slot 0 = 0
[    2.352114] bus=0x0, slot = 0x0
[    2.355235] BAR0 at slot 1 = 0
[    2.358249] bus=0x0, slot = 0x1
[    2.361379] BAR0 at slot 2 = 0
[    2.364386] bus=0x0, slot = 0x2
[    2.367503] bus=0x1, slot = 0x0, irq=0x0
[    2.371407] bus=0x2, slot = 0x1, irq=0xff
[    2.375369] bus=0x3, slot = 0x2, irq=0xff
[    2.380865] clocksource: Switched to clocksource GIC
[    2.387562] NET: Registered protocol family 2
[    2.392657] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    2.399548] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    2.406038] TCP: Hash tables configured (established 2048 bind 2048)
[    2.412391] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.418153] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.424649] NET: Registered protocol family 1
[    2.428986] PCI: CLS 80 bytes, default 32
[    2.660770] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    2.667308] Crashlog allocated RAM at address 0x3f00000
[    2.672924] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[    2.688048] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.693846] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.706114] random: fast init done
[    2.709718] io scheduler noop registered
[    2.713595] io scheduler deadline registered (default)
[    2.718970] gpio-export gpio-export: 1 gpio(s) exported
[    2.724789] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    2.732491] console [ttyS0] disabled
[    2.736030] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
[    2.745041] console [ttyS0] enabled
[    2.751916] bootconsole [early0] disabled
[    2.761028] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[    2.768307] spi-mt7621 1e000b00.spi: sys_freq: 50000000
[    2.774580] m25p80 spi32766.0: using chunked io (size=32)
[    2.779965] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
[    2.785469] 4 fixed-partitions partitions found on MTD device spi32766.0
[    2.792153] Creating 4 MTD partitions on "spi32766.0":
[    2.797277] 0x000000000000-0x000000030000 : "bootloader"
[    2.803882] 0x000000030000-0x000000040000 : "config"
[    2.810001] 0x000000040000-0x000000050000 : "factory"
[    2.816327] 0x000000050000-0x000001000000 : "firmware"
[    2.849027] 2 uimage-fw partitions found on MTD device firmware
[    2.854966] 0x000000050000-0x0000001e357b : "kernel"
[    2.861234] 0x0000001e357b-0x000001000000 : "rootfs"
[    2.867355] mtd: device 5 (rootfs) set to be root filesystem
[    2.873129] 1 squashfs-split partitions found on MTD device rootfs
[    2.879289] 0x0000003e0000-0x000001000000 : "rootfs_data"
[    2.886324] libphy: Fixed MDIO Bus: probed
[    2.962745] mtk_soc_eth 1e100000.ethernet: generated random MAC address a2:1d:3f:30:51:1f
[    2.971063] libphy: mdio: probed
[    4.374662] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    4.381524] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[    4.392218] NET: Registered protocol family 10
[    4.398339] NET: Registered protocol family 17
[    4.402918] 8021q: 802.1Q VLAN Support v1.8
[    4.409649] hctosys: unable to open rtc device (rtc0)
[    4.420535] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    4.428252] Freeing unused kernel memory: 252K
[    4.432791] This architecture does not have kernel memory protection.
[    4.860052] random: crng init done
[    5.036877] init: Console is alive
[    5.040482] init: - watchdog -
[    5.607155] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.710296] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.721165] init: - preinit -
[    6.822265] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
[    9.946207] jffs2: notice: (399) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    9.965719] mount_root: switching to jffs2 overlay
[    9.992739] urandom-seed: Seeding with /etc/urandom.seed
[   10.036063] procd: - early -
[   10.039045] procd: - watchdog -
[   10.690990] procd: - watchdog -
[   10.694446] procd: - ubus -
[   10.754884] procd: - init -
[   11.108489] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.119548] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.133097] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   11.141157] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   11.150303] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.161814] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[   11.201216] xt_time: kernel timezone is -0000
[   11.317355] mt76x2e 0000:02:00.0: ASIC revision: 76120044
[   11.340862] mt76x2e 0000:02:00.0: ROM patch already applied
[   11.420865] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
[   11.426345] mt76x2e 0000:02:00.0: Build: 1
[   11.430419] mt76x2e 0000:02:00.0: Build Time: 201507311614____
[   11.460819] mt76x2e 0000:02:00.0: Firmware running!
[   11.467078] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.471971] mt76x2e 0000:03:00.0: ASIC revision: 76020044
[   11.500910] mt76x2e 0000:03:00.0: ROM patch already applied
[   11.507385] mt76x2e 0000:03:00.0: Firmware Version: 0.0.00
[   11.512897] mt76x2e 0000:03:00.0: Build: 1
[   11.516982] mt76x2e 0000:03:00.0: Build Time: 201507311614____
[   11.550886] mt76x2e 0000:03:00.0: Firmware running!
[   11.557593] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   11.567590] PPP generic driver version 2.4.2
[   11.573574] NET: Registered protocol family 24
[   11.600286] kmodloader: done loading kernel modules from /etc/modules.d/*
[   16.443588] device eth0 entered promiscuous mode
[   16.449685] br-lan: port 1(eth0.1) entered blocking state
[   16.455166] br-lan: port 1(eth0.1) entered disabled state
[   16.461562] device eth0.1 entered promiscuous mode
[   16.468816] br-lan: port 1(eth0.1) entered blocking state
[   16.474334] br-lan: port 1(eth0.1) entered forwarding state
[   16.480411] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   17.491512] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   18.386467] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.396002] br-lan: port 2(wlan0) entered blocking state
[   18.401369] br-lan: port 2(wlan0) entered disabled state
[   18.407358] device wlan0 entered promiscuous mode
[   18.412311] br-lan: port 2(wlan0) entered blocking state
[   18.417610] br-lan: port 2(wlan0) entered forwarding state
[   18.501177] br-lan: port 2(wlan0) entered disabled state
[   19.059272] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.066079] br-lan: port 2(wlan0) entered blocking state
[   19.071444] br-lan: port 2(wlan0) entered forwarding state
[   19.313569] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   19.324603] br-lan: port 3(wlan1) entered blocking state
[   19.329943] br-lan: port 3(wlan1) entered disabled state
[   19.337041] device wlan1 entered promiscuous mode
[   19.342168] br-lan: port 3(wlan1) entered blocking state
[   19.347488] br-lan: port 3(wlan1) entered forwarding state
[   19.510946] br-lan: port 3(wlan1) entered disabled state
[   28.112158] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   28.118862] br-lan: port 3(wlan1) entered blocking state
[   28.124222] br-lan: port 3(wlan1) entered forwarding state

Tags

toh/unielec/u7621-06.txt · Last modified: 2018/06/16 05:41 by tmomas