Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:ubiquiti:unifi_outdoorplus [2016/01/06 21:00] – Put some emphasis on actual testing before confirming support tmomastoh:ubiquiti:unifi_outdoorplus [2019/10/17 10:50] – table fixed tmomas
Line 3: Line 3:
 The UniFi Outdoor Plus is an 802.11b/g/n weatherproof outdoor access point. Exclusive feature is a configurable RF filter in the receive path that should allow better sensitivity in noisy environment. The UniFi Outdoor Plus is an 802.11b/g/n weatherproof outdoor access point. Exclusive feature is a configurable RF filter in the receive path that should allow better sensitivity in noisy environment.
  
-**Reverse engineering the control protocol of the filter is currently being worked on. Without a correctly programmed filter, the access point is deaf and therefore not usable** +**Reverse engineering the control protocol of the filter is currently being worked on. Without a correctly programmed filter, the access point is deaf and therefore not usable**.
-===== Supported Versions ===== +
-^ Version/Model ^ Launch Date ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^ +
-| v1    2006-07  | - |  -  | - | +
-| v1.1 |  2008-12  | - |  -  | - | +
-| v2    2011-01  | - |  -  | - |+
  
-OEM source code available at: [[https://www.ubnt.com/???]] 
  
-<WRAP box center 80%> {{:meta:icons:tango:48px-emblem-question.svg.png }} If you can **confirm** that OpenWrt is running on this device (i.e. you or someone else has **tested** it), please update the data accordingly. -> Click //View/Edit data// +===== Supported Versions =====
-/* Special style definitions for the various Tables of Hardware.            */ +
-{{page>meta:infobox:tohstyles&noheader&nofooter&noeditbtn&inline&indent&link}}+
 ---- datatable ---- ---- datatable ----
-cols    : Model, Versions, Supported Since Rev_url, Supported Since Rel, Supported Current Rel, Device Techdata_pageid +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid 
-align   : l,c,l,c,c,c+headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data 
 +align   : c,c,c,c,c,c,c
 filter  : Model=UniFi Outdoor Plus filter  : Model=UniFi Outdoor Plus
-----</WRAP> +----
-===== Hardware Highlights =====+
  
-Ver CPU ^ Ram ^ Flash ^ Network ^ Wireless ^ USB ^ Serial ^ JTag ^ Wiki ^ FCC +Version/Model Launch Date 
-| v1 | Atheros AR7240 64MiB 16MiB 2x LAN (100MBit) Atheros 9280 | No +| v1    2006-07  | 
 +v1.1  2008-12  | 
 +v2    2011-01  |
  
-Manufacturer's site: [[https://www.ubnt.com/unifi/unifi-ap-outdoor/]] 
  
-Forum: [[https://forum.openwrt.org/viewtopic.php?id=xxxxx]] +===== Hardware Highlights ===== 
- +---- datatable ---- 
-==== Keep the articles modular ==== +cols    : ModelVersionsCPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHzEthernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
-| Please include only model specific informationomit bla,bla and put everything generic into separate articles +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
-| [[doc/howto/generic.overview]] if you have no time to write certain stuff link to this | +align   : c,c,c,c,c,c,c,c,c,c,c,c,
-| [[doc/howto/basic.config]] should lead the waydo not explain this again  | +filter  : Model=UniFi Outdoor Plus 
-| DO NOT provide a complete howto here! Instead //groom// the general HowTos.  |+----
  
  
 ===== Installation ===== ===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : c,c,c
 +filter  : Model=UniFi Outdoor Plus
 +----
 +
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +
  
 An unconfigured device gets its IP address via DHCP, Login username and password is 'ubnt'. Once the device has been adopted by a controller, it will use the device password of the 'Site config' page. Use ssh to login. An unconfigured device gets its IP address via DHCP, Login username and password is 'ubnt'. Once the device has been adopted by a controller, it will use the device password of the 'Site config' page. Use ssh to login.
Line 45: Line 47:
 </code> </code>
   - scp /tmp/jffs.img to your backup location, rm /tmp/jffs.img from the device to save memory   - scp /tmp/jffs.img to your backup location, rm /tmp/jffs.img from the device to save memory
-  - → [[doc:howto:obtain.firmware]]. You need the openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin FACTORY image+  - Download the factory.bin image as shown above
   - scp the image to the /tmp directory of your device   - scp the image to the /tmp directory of your device
   - Install OpenWrt using <code>   - Install OpenWrt using <code>
 fwupdate.real -m openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin -d fwupdate.real -m openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin -d
 </code> </code>
 +
 ==== Flash Layout ==== ==== Flash Layout ====
  
Line 65: Line 68:
 ^ Layer2       | | |  mtd2 **//kernel//** 1536KiB  |  mtd3 **//rootfs//** 14208KiB   || | | ^ Layer2       | | |  mtd2 **//kernel//** 1536KiB  |  mtd3 **//rootfs//** 14208KiB   || | |
 ^ <color magenta>mountpoint</color>   | | | |  <color magenta>''/''</color>  || | | ^ <color magenta>mountpoint</color>   | | | |  <color magenta>''/''</color>  || | |
-^ filesystem   | | | |  [[doc:techref:filesystems#mini_fo|mini_fo]]/[[doc:techref:filesystems#overlayfs|overlayfs]]  || | |+^ filesystem   | | | |  [[docs:techref:filesystems#mini_fo|mini_fo]]/[[docs:techref:filesystems#overlayfs|overlayfs]]  || | |
 ^ Layer3       | | | | |  mtd4 **//rootfs_data//** 11904KiB | | | ^ Layer3       | | | | |  mtd4 **//rootfs_data//** 11904KiB | | |
 ^ Size in KiB  |  256KiB  |  64KiB  |  1536KiB  |  2304KiB  |  11904KiB  |  256KiB  |  64KiB  | ^ Size in KiB  |  256KiB  |  64KiB  |  1536KiB  |  2304KiB  |  11904KiB  |  256KiB  |  64KiB  |
 ^ Name          **//u-boot//**  |  **//u-boot-env//**  |  **//kernel//**  | |  **//rootfs_data//**  |  **//cfg//**  |  **//EEPROM//**  | ^ Name          **//u-boot//**  |  **//u-boot-env//**  |  **//kernel//**  | |  **//rootfs_data//**  |  **//cfg//**  |  **//EEPROM//**  |
 ^ <color magenta>mountpoint</color>  |  //none//  |  //none//  |  //none//  |  <color magenta>''/rom''</color>  |  <color magenta>''/overlay''</color>    //none//  |  //none//  | ^ <color magenta>mountpoint</color>  |  //none//  |  //none//  |  //none//  |  <color magenta>''/rom''</color>  |  <color magenta>''/overlay''</color>    //none//  |  //none//  |
-^ filesystem    //none//  |  //none//  |  //none//  |  [[doc:techref:filesystems#SquashFS]]  |  [[doc:techref:filesystems#JFFS2]]  |  //none//  |  //none//  |+^ filesystem    //none//  |  //none//  |  //none//  |  [[docs:techref:filesystems#SquashFS]]  |  [[docs:techref:filesystems#JFFS2]]  |  //none//  |  //none//  |
  
 ==== Upgrading OpenWrt ==== ==== Upgrading OpenWrt ====
-->  [[doc:howto:generic.sysupgrade]]+->  [[docs:guide-user:installation:generic.sysupgrade]]
  
 ==== Revert to stock firmware (untested) ==== ==== Revert to stock firmware (untested) ====
Line 87: Line 90:
  
 ===== Basic configuration ===== ===== Basic configuration =====
--> [[doc:howto:basic.config|Basic configuration]] After flashing, proceed with this.\\+-> [[docs:guide-quick-start:checks_and_troubleshooting|Basic configuration]] After flashing, proceed with this.\\
 Set up your Internet connection, configure wireless, configure USB port, etc. Set up your Internet connection, configure wireless, configure USB port, etc.
  
Line 99: Line 102:
  
 The default network configuration is: The default network configuration is:
-^ Interface Name ^ Description ^ Default configuration ^ +^ Interface Name   ^ Description   ^ Default configuration   
-| br-lan | LAN & WiFi | 192.168.1.1/24 |  +| br-lan           | LAN & WiFi    | 192.168.1.1/24          
-| eth0 | LAN port | None |  +| eth0             | LAN port      | None                    
-| eth1 | WAN port | DHCP |  +| eth1             | WAN port      | DHCP                    
-| wlan0 | WiFi | Disabled | +| wlan0            | WiFi          | Disabled                |
  
  
 ==== Failsafe mode ==== ==== Failsafe mode ====
  
-Use the instructions from -> [[doc:howto:generic.failsafe]]. The button to trigger failsafe during bootup is the reset button hidden between the two ethernet ports.+Use the instructions from -> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]]. The button to trigger failsafe during bootup is the reset button hidden between the two ethernet ports.
  
 ==== Buttons ==== ==== Buttons ====
--> [[doc:howto:hardware.button]] on howto use and configure the hardware button(s).+-> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
  
 The Linksys WRT54GL has two buttons. They are Reset and Secure Easy Setup. Here, we merely name the buttons, so we can use them in the above Howto: The Linksys WRT54GL has two buttons. They are Reset and Secure Easy Setup. Here, we merely name the buttons, so we can use them in the above Howto:
-^ BUTTON ^ Event ^ +^ BUTTON              ^ Event   
-| Reset | reset |  +| Reset               | reset   
-| Secure Easy Setup | ses | +| Secure Easy Setup   | ses     |
  
  
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-| **[[wp>Instruction set]]:**               | [[wp>MIPS architecture|MIPS]] | +[[wp>Instruction set]]             | [[wp>MIPS architecture|MIPS]] | 
-| **Vendor:**                               | [[wp>Qualcomm Atheros]] | +Vendor                             | [[wp>Qualcomm Atheros]] | 
-| **[[doc:techref:Bootloader]]:**           | [[doc:techref:bootloader:uboot|U-Boot]] | +[[docs:techref:bootloader]]        | [[docs:techref:bootloader:uboot|U-Boot]] | 
-| **[[doc:hardware:soc|System-On-Chip]]:**  | | +[[docs:techref:hardware:soc|System-On-Chip]]  | | 
-| **[[doc:hardware:cpu|CPU]] @Frq**         | MIPS 24Kc V7.4 @?MHz | +[[docs:techref:hardware:cpu|CPU]] @Frq         | MIPS 24Kc V7.4 @?MHz | 
-| **Flash size:**                 | 16384 KiB | +Flash size                 | 16384 KiB | 
-| **Flash Chip:**                 | en25qh128 | +Flash Chip                 | en25qh128 | 
-| **RAM size:**                   | 64 MiB   | +RAM size                   | 64 MiB   | 
-| **RAM Chip:**                   |   | +RAM Chip                     | 
-| **Wireless No1:**               | 2x2 MIMO for 2.4GHz 802.11b/g/n | +Wireless No1               | 2x2 MIMO for 2.4GHz 802.11b/g/n | 
-| **[[doc:hardware:Switch]]:**    | //none// | +[[docs:techref:hardware:switch]]    | //none// | 
-| **[[doc/hardware/internet.access.technologies|Modem]]:**   | //none// | +[[docs:techref:hardware:internet.access.technologies|Modem]]   | //none// | 
-| **USB:**                        | No  | +USB                        | No  | 
-| **PSU:**             | 48V/0.5A passive PoE supply shipped, also supports 802.3af | +PSU             | 48V/0.5A passive PoE supply shipped, also supports 802.3af | 
-| **[[doc:hardware:port.serial|Serial]]:**  | [[#Serial|?]] | +[[docs:techref:hardware:port.serial|Serial]]  | [[#Serial|?]] | 
-| **[[doc:hardware:port.jtag|JTAG]]:**      | [[#JTAG|?]]   |+[[docs:techref:hardware:port.jtag|JTAG]]      | [[#JTAG|?]]   | 
 ==== Photos ==== ==== Photos ====
 Model Number Model Number
Line 158: Line 162:
  
 ==== Serial ==== ==== Serial ====
--> [[doc:hardware:port.serial]] general information about the serial port, serial port cable, etc.+-> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
  
 How to connect to the Serial Port of this specific device: How to connect to the Serial Port of this specific device:
Line 172: Line 176:
  
 ==== JTAG ==== ==== JTAG ====
--> [[doc:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.+-> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
  
 How to connect to the JTAG Port of this specific device: How to connect to the JTAG Port of this specific device:
Line 183: Line 187:
 [[https://community.ubnt.com/t5/UniFi-Troubleshooting/UniFi-TFTP-soft-recovery-for-bricked-access-point/ta-p/607605|UBNT forum]], but it's possibly not working once OpenWrt has been installed. [[https://community.ubnt.com/t5/UniFi-Troubleshooting/UniFi-TFTP-soft-recovery-for-bricked-access-point/ta-p/607605|UBNT forum]], but it's possibly not working once OpenWrt has been installed.
  
-===== Bootloader Mods ===== 
- 
-Currently none. 
  
 ===== Bootlogs ===== ===== Bootlogs =====
Line 555: Line 556:
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>outdoor FastEthernet no_switch PoE 2NIC 1WNIC 802.11bgn ath9k DetachableAntenna 2ant 64RAM 16Flash MIPS MIPS32}}+{{tag>AR7240 outdoor FastEthernet no_switch PoE 2NIC 1WNIC 802.11bgn ath9k DetachableAntenna 2ant 64RAM 16Flash MIPS MIPS32}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1