Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:ubiquiti:airrouter [2018/02/20 18:51] – ↷ Links adapted because of a move operation bobafetthotmailtoh:ubiquiti:airrouter [2018/05/10 17:38] – Datatables added tmomas
Line 1: Line 1:
 ====== Ubiquiti AirRouter/AirRouterHP ====== ====== Ubiquiti AirRouter/AirRouterHP ======
  
 +
 +===== Supported Versions =====
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c
 +filter  : Model*~AirRouter
 +----
 +
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Model*~AirRouter
 +----
 +
 +
 +===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : l,c,c
 +filter  : Model*~AirRouter
 +----
 +
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
 +
 +
 +This guide works for both the AirRouter and the AirRouterHP models and no additional modifications needs to be made before flashing the image.
 +
 +  - Find the latest [[http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/|Barrier Breaker]] image named openwrt-ar71xx-generic-ubnt-airrouter-squashfs-factory.bin or openwrt-ar71xx-generic-ubnt-airrouter-jffs2-factory.bin
 +  - Connect to the router with an ethernet cable, flashing over Wi-Fi is **not recommended!**
 +  - Log in to AirOS on the Router and open the System tab
 +  - Flash the open-wrt image you downloaded earlier using the firmware update utility in AirOS (**make sure you're flashing the file that ends with -factory.bin or you will probably brick your router**)
 +  - After a few minutes the router will restart and you can login on your router on 192.168.1.1
 +
 +
 +
 +===== Hardware =====
 ==== Info ==== ==== Info ====
 | **[[wp>Instruction set]]:**               | [[wp>MIPS architecture#MIPS32|MIPS32]] | | **[[wp>Instruction set]]:**               | [[wp>MIPS architecture#MIPS32|MIPS32]] |
 | **Vendor:**                               | [[wp>Atheros]] | | **Vendor:**                               | [[wp>Atheros]] |
 | **[[docs:techref:bootloader]]:**           | [[docs:techref:bootloader:uboot|U-Boot]] | | **[[docs:techref:bootloader]]:**           | [[docs:techref:bootloader:uboot|U-Boot]] |
-| **[[docs:hardware:soc|System-On-Chip]]:**  | Atheros AR7241 | +| **[[docs:techref:hardware:soc|System-On-Chip]]:**  | Atheros AR7241 | 
-| **[[docs:hardware:cpu|CPU]] @Frq**         | Atheros AR7241 rev 1 MIPS 24Kc V7.4 @390MHz|+| **[[docs:techref:hardware:cpu|CPU]] @Frq**         | Atheros AR7241 rev 1 MIPS 24Kc V7.4 @390MHz|
 | **Flash size:**                 | 8MB | | **Flash size:**                 | 8MB |
 | **Flash Chip:**                 | Macronix MX25L6406EMI-12G | | **Flash Chip:**                 | Macronix MX25L6406EMI-12G |
Line 15: Line 56:
 | **Wireless:**               | Atheros AR9285 | | **Wireless:**               | Atheros AR9285 |
 | **Ethernet:**               | Atheros AR7241 | | **Ethernet:**               | Atheros AR7241 |
-| **[[docs:hardware:switch]]:**    | Atheros AR7241 |+| **[[docs:techref:hardware:switch]]:**    | Atheros AR7241 |
 | **Modem:**                      | na | | **Modem:**                      | na |
 | **USB:**                        | Yes 1 x 2.0 | | **USB:**                        | Yes 1 x 2.0 |
-| **[[docs:hardware:port.serial|Serial]]:**  | yes, internal, 12-pin header, (115200,8,N,1), JP3 |+| **[[docs:techref:hardware:port.serial|Serial]]:**  | yes, internal, 12-pin header, (115200,8,N,1), JP3 |
  
- +==== Serial Port ====
-===== Installing the firmware ===== +
-This guide works for both the AirRouter and the AirRouterHP models and no additional modifications needs to be made before flashing the image. +
- +
-  - Find the latest [[http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/|Barrier Breaker]] image named openwrt-ar71xx-generic-ubnt-airrouter-squashfs-factory.bin or openwrt-ar71xx-generic-ubnt-airrouter-jffs2-factory.bin +
-  - Connect to the router with an ethernet cable, flashing over Wi-Fi is **not recommended!** +
-  - Log in to AirOS on the Router and open the System tab +
-  - Flash the open-wrt image you downloaded earlier using the firmware update utility in AirOS (**make sure you're flashing the file that ends with -factory.bin or you will probably brick your router**) +
-  - After a few minutes the router will restart and you can login on your router on 192.168.1.1 +
- +
-===== Serial Port =====+
 The board has a non-populated pinhead J3 (also labeled as UART) with a TTL (3.3V) level serial port as described: The board has a non-populated pinhead J3 (also labeled as UART) with a TTL (3.3V) level serial port as described:
  
-^PIN    ^USE ^ +^ PIN   ^ USE   
-|1 |VCC| +| 1     | VCC   
-|3 |RX| +| 3     | RX    
-|9 |TX| +| 9     | TX    
-|11| GND|+| 11    | GND   |
  
 ===== Button ===== ===== Button =====
Line 53: Line 84:
  
 Lan Port Mappings for /etc/config/network Lan Port Mappings for /etc/config/network
-^ Hardware Port ^ Logical port ^ Description ^ + 
-| NA | 0 | CPU port activates/links all ports on Vlan | +^ Hardware Port   ^ Logical port   ^ Description                                  
-| 1 | 4 | Activates the #1 LAN port | +| NA              | 0              | CPU port activates/links all ports on Vlan   
-| 2 | 3 | Activates the #2 LAN port | +| 1               | 4              | Activates the #1 LAN port                    
-| 3 | 2 | Activates the #3 LAN port | +| 2               | 3              | Activates the #2 LAN port                    
-| 4 | 1 | Activates the #4 LAN port | +| 3               | 2              | Activates the #3 LAN port                    
-| WAN | NA | Activates the WAN/Internet port (eth1) |+| 4               | 1              | Activates the #4 LAN port                    
 +| WAN             | NA             | Activates the WAN/Internet port (eth1)       |
  
  
Line 81: Line 113:
   - Restart the router, by plugging out the power and replug it   - Restart the router, by plugging out the power and replug it
   - Hit http://192.168.1.1 and you should get the airOS web page   - Hit http://192.168.1.1 and you should get the airOS web page
 +
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>AR7241 8flash 32ram}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1