Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:ubiquiti:aircube_isp [2022/02/11 11:58] – Warning/Suggestion to also install LUCI cybermaustoh:ubiquiti:aircube_isp [2023/06/17 09:16] – Make the page valid for the AC too. c-mauderer
Line 1: Line 1:
-====== Ubiquiti airCube ISP ======+====== Ubiquiti airCube ISP / AC ======
  
 The Ubiquiti Network airCube ISP is a cube shaped 2.4 GHz with internal 2x2 MIMO antennas. It can be supplied via a USB connector or via PoE. There are four 10/100 Mbps ports (1 * WAN + 3 * LAN). An optional PoE passthrough from the first LAN port to the WAN port is possible from the hardware. The Ubiquiti Network airCube ISP is a cube shaped 2.4 GHz with internal 2x2 MIMO antennas. It can be supplied via a USB connector or via PoE. There are four 10/100 Mbps ports (1 * WAN + 3 * LAN). An optional PoE passthrough from the first LAN port to the WAN port is possible from the hardware.
  
 {{media:ubiquiti:aircube_isp_closed.jpg?600|Ubiquiti airCube ISP}} {{media:ubiquiti:aircube_isp_closed.jpg?600|Ubiquiti airCube ISP}}
 +
 +The AC has a similar shape with slightly different features and a 2.4 + 5 GHz WLAN.
 +
 +Please note that most of this page is based on the ISP because that was the initial port.
  
 ===== Supported Versions ===== ===== Supported Versions =====
Line 11: Line 15:
 align   : c,c,c,c,c,c,c align   : c,c,c,c,c,c,c
 filter  : Model=airCube ISP filter  : Model=airCube ISP
 +filteror: Model=airCube AC
 ---- ----
  
Line 16: Line 21:
 cols    : Unsupported Functions_unsupporteds cols    : Unsupported Functions_unsupporteds
 filter  : Model=airCube ISP filter  : Model=airCube ISP
 +filteror: Model=airCube AC
 ---- ----
  
Line 30: Line 36:
 align   : c,c,c,c,c,c,c,c,c,c,c,c,c align   : c,c,c,c,c,c,c,c,c,c,c,c,c
 filter  : Model=airCube ISP filter  : Model=airCube ISP
 +filteror: Model=airCube AC
 ---- ----
  
Line 35: Line 42:
 ===== Installation ===== ===== Installation =====
 ---- datatable ---- ---- datatable ----
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt snapshot Install URL_urls, Firmware OpenWrt snapshot Upgrade URL_urls, Firmware OEM Stock URL_url +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_urls, Firmware OpenWrt Upgrade URL_urls, Firmware OEM Stock URL_url 
-headers : Model, Version, Current Release, Firmware OpenWrt Snapshot Install, Firmware OpenWrt Snapshot Upgrade, Firmware OEM Stock+headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 align   : c,c,c align   : c,c,c
 filter  : Model=airCube ISP filter  : Model=airCube ISP
 +filteror: Model=airCube AC
 ---- ----
-:!: **LUCI is not installed with above images.** After install of OpenWRT, use SSH/PuTTY to install and start Luci.+
  
 ==== Via OEM Web Interface ==== ==== Via OEM Web Interface ====
Line 49: Line 57:
  
   * First **make sure that you have either Firmware 2.5.0 or 2.8.3**. If you need to downgrade, you might have to use TFTP recovery for that. See either the [[toh:ubiquiti:aircube_isp#back_to_stock_firmware|Back to Stock Firmware]] section or the [[https://help.ui.com/hc/en-us/articles/360007287313-airCube-TFTP-Recovery|official guide from the manufacturer]] for how to do that.   * First **make sure that you have either Firmware 2.5.0 or 2.8.3**. If you need to downgrade, you might have to use TFTP recovery for that. See either the [[toh:ubiquiti:aircube_isp#back_to_stock_firmware|Back to Stock Firmware]] section or the [[https://help.ui.com/hc/en-us/articles/360007287313-airCube-TFTP-Recovery|official guide from the manufacturer]] for how to do that.
-  * Get the configuration from {{ :media:ubiquiti:aircube_isp_remove_signaturecheck_config_firmware_2.5.0.tgz |here for 2.5.0}} or from {{ :media:ubiquiti:aircube_isp_remove_signaturecheck_config_firmware_2.8.3.tgz |here for 2.8.3}}+  * Get the configuration from {{ :media:ubiquiti:aircube_isp_remove_signaturecheck_config_firmware_2.5.0.tgz |here for ISP 2.5.0}}from {{ :media:ubiquiti:aircube_isp_remove_signaturecheck_config_firmware_2.8.3.tgz |here for ISP 2.8.3}} or from {{ :media:ubiquiti:aircube_ac_remove_signaturecheck_config_firmware_2.8.3.tgz |here for AC 2.8.3}}.
   * Connect to 192.168.1.1 in your browser and upload the configuration.   * Connect to 192.168.1.1 in your browser and upload the configuration.
   * Apply the config and reboot the device.   * Apply the config and reboot the device.
Line 209: Line 217:
  
 **NOTE:** For airCubes which had a firmware >= 2.8.0, you can only flash >= 2.8.1 (not 2.8.0!). For airCubes which had firmware < 2.8.0, you can flash anything <= 2.8.0. **NOTE:** For airCubes which had a firmware >= 2.8.0, you can only flash >= 2.8.1 (not 2.8.0!). For airCubes which had firmware < 2.8.0, you can flash anything <= 2.8.0.
-===== Hardware =====+===== Hardware (ISP) =====
 ==== Info ==== ==== Info ====
 ^ Architecture     | MIPS                                        | ^ Architecture     | MIPS                                        |
Line 336: Line 344:
 Warning: This means that 48V equipment will not work, and might be destroyed if connected to it. Warning: This means that 48V equipment will not work, and might be destroyed if connected to it.
  
-===== OEM firmware 2.4.0 =====+===== OEM firmware 2.4.0 (ISP) =====
  
 Tested firmware version: ACB.ar934x.v2.4.0.cb22320.180904.1044 Tested firmware version: ACB.ar934x.v2.4.0.cb22320.180904.1044
Line 786: Line 794:
 </nowiki></WRAP>\\ </nowiki></WRAP>\\
  
-===== OEM firmware 2.8.3 =====+===== OEM firmware 2.8.3 (ISP) =====
  
 Tested firmware version: ACB.ar934x.v2.8.3.f1a1344.210726.1457 Tested firmware version: ACB.ar934x.v2.8.3.f1a1344.210726.1457
  • Last modified: 2024/09/06 07:22
  • by dnd