GEOS 1.1 ADSL2+ x86 Router

A single line ADSL2+ router on x86 architecture. Rebadged in the UK by http://sharedband.com/

  • AMD Geode LX800 500MHz processor
  • Fully supported by Linux 2.6 and 3.0 Kernels
  • DDR400 RAM SO-DIMM (256MB or 512MB)
  • 1 x ADSL2+ Port
  • 2 x 10/100 Ethernet Ports
  • 1 x USB ports
  • Mini PCI socket
  • Compact Flash socket
  • 44-pin IDE header
  • RS-232 Serial
  • 3 x GPIO LEDs
  • 1 x GPIO switch
Architecture ARM
bootloader Coreboot
CPU/Speed AMD Geode LX800
Speed 500MHz
Flash-Chip Compact Flash
Flash size 128MB - 32GB
RAM 128MB or 256MB
Ethernet 2x 10/100
Internet 1x ADSL2+
USB Yes
Serial Yes
JTAG No

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

FIXME Replace EXAMPLE by real values.

Serial connection parameters
for GEOS 1.1
EXAMPLE 115200, 8N1

WIP

OpenWrt can be installed via a web-interface from the existing OEM firmware: SystemUpgrade Firmware Alternative installation routines can be found at Installing OpenWrt.

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2018/06/02 20:00
  • by tmomas