TP-Link RE305 v1

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

Generic Router

FIXME

  1. This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
  2. There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
  3. When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.
  • Please include only model specific information, omit bla,bla and put everything generic into separate articles
  • If you have no time to write certain stuff, link to docs
  • base-system should lead the way, do not explain this again
  • DO NOT provide a complete howto here! Instead groom the general documentation.
ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
RE305v1MediaTek MT7628AN580864MediaTek MT7628AN, MediaTek MT7612ENb/g/na/n/ac1---

Flash factory image through stock firmware WEB UI.

Specific values needed for tftp

FIXME Enter values for “FILL-IN” below

Bootloader tftp server IPv4 address FILL-IN
Bootloader MAC address (special) FILL-IN
Firmware tftp image Latest OpenWrt release (NOTE: Name must contain “tftp”)
TFTP transfer window FILL-IN seconds
TFTP window start approximately FILL-IN seconds after power on
TFTP client required IP address FILL-IN

generic.sysupgrade

FIXME These are generic instructions. Update with your router's specifics.

  • Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
  • Upload image file for sysupgrade to LuCI
  • Wait for reboot

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

  • sysupgrade
  • mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

Back to stock is possible by using TFTP and stripping down the Firmware provided by TP-Link to an initramfs.

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

FIXME Please fill in real values for this device, then remove the EXAMPLEs

The default network configuration is:

Interface Name Description Default configuration
br-lan EXAMPLE LAN & WiFi EXAMPLE 192.168.1.1/24
vlan0 (eth0.0) EXAMPLE LAN ports (1 to 4) EXAMPLE None
vlan1 (eth0.1) EXAMPLE WAN port EXAMPLE DHCP
wl0 EXAMPLE WiFi EXAMPLE Disabled

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port Switch port
Internet (WAN) EXAMPLE 4
LAN 1 EXAMPLE 3
LAN 2 EXAMPLE 2
LAN 3 EXAMPLE 1
LAN 4 EXAMPLE 0

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

FIXME Please fill in real values for this device, then remove the EXAMPLEs

The TP-Link RE305 has the following buttons:

BUTTON Event
EXAMPLE Reset reset
EXAMPLE Secure Easy Setup ses
EXAMPLE No buttons at all. -
0x000000000000-0x000000800000 “ALL”
0x000000000000-0x000000020000 “fs-uboot”
0x000000020000-0x000000110000 “os-image”
0x000000110000-0x000000600000 “file-system”
0x0000007f0000-0x000000800000 “radio”
0x00000000-0x00020000 “fs-uboot”
0x00020000-0x000f0000 “os-image”
0x00110000-0x004f0000 “file-system”
0x00600000-0x00002000 “partition-table”
0x00610000-0x00000020 “default-mac”
0x00610100-0x00000020 “pin”
0x00611100-0x00001000 “product-info”
0x00620000-0x00001000 “soft-version”
0x00621000-0x00001000 “support-list”
0x00622000-0x00008000 “profile”
0x00630000-0x00010000 “user-config”
0x00640000-0x00010000 “default-config”
0x007f0000-0x00010000 “radio”
General
Brand TP-Link
Model RE305
Versions v1
Device Type Range Extender
Availability Discontinued
Comments - general
OpenWrt Support
Supported Since Commit https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=93a4c8afbff550886c0d8413d219d64dc63d72bf
Supported Since Release
Supported Current Release snapshot
Unsupported
Hardware
Bootloader U-Boot
Target ramips
System-On-Chip MediaTek MT7628AN
CPU MHz 580
Flash MB 8
RAM MB 64
Network
Ethernet 100M ports 1
Ethernet Gbit ports -
Switch -
Modem -
VLAN ¿
Comments - network ports
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz a/n/ac
WLAN Hardware MediaTek MT7628AN, MediaTek MT7612EN
Detachable Antennas -
Comments - WLAN
Interfaces
USB ports -
SATA ports -
Serial Yes
JTAG ¿
Comments - USB & SATA ports
Misc
LED count 5
Button count 2
Power supply 100-240 VAC, 50-60 Hz, 0.3 A
Links
Forum Topic URL
WikiDevi URL https://wikidevi.wi-cat.ru/TP-LINK_RE305
OEM device homepage URL https://www.tp-link.com/en/home-networking/range-extender/re305/
Firmware OEM Stock URL https://www.tp-link.com/en/support/download/re305/v1/
Firmware OpenWrt Install URL
Firmware OpenWrt Upgrade URL
Edit the underlying data View/Edit data

Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Backside label:
Insert photo of backside label

Note: This will void your warranty!

The RE305 v1 can be disassembled easily by removing the four screws exposed on the back side. After that, you can pull apart both parts of the casing.

Device opened up:

tp-link_re305_v1_opened.jpg

Main PCB:

tp-link_re305_v1_main_board.jpg

port.serial general information about the serial port, serial port cable, etc.

See the picture of the main PCB above for a clear shot of the unpopulated serial header (J2, on the upper left).

How to connect to the Serial Port of this specific device:

Serial connection parameters for TP-Link RE305 v1 57600, 8N1

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

DDR Calibration DQS reg = 00008788 U-Boot 1.1.3 (Jun 14 2017 - 11:50:18) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83fb8000 flash manufacture id: c8, device id 40 17 find flash: GD25Q64B *** Warning - bad CRC, using default environment | ============================================ Ralink UBoot Version: 4.3.0.0 + -------------------------------------------- ASIC 7628_MP (Port5<->None) | DRAM component: 512 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 64 MBytes Flash component: SPI Flash Date:Jun 14 2017 Time:11:50:18 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 575 MHZ #### estimate memory size =64 Mbytes RESET MT7628 PHY!!!!!! Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. 0 3: System Boot system code via Flash. gpioMode1 Reg: 0x570544c4 gpioMode2 Reg: 0x554 ## Booting image at bc020000 ... text base: 80000000 entry point: 8000c150 Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 8000c150) ... ## Giving linux memsize in MB, 64 Starting kernel ... LINUX started... THIS IS ASIC Linux version 2.6.36 (root@tpuser-H81M-S2PV) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 Wed Jun 14 11:52:22 CST 2017 The CPU feqenuce set to 580 MHz CPU revision is: 00019655 (MIPS 24Kc) Software DMA cache coherency Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00004000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00004000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Writing ErrCtl register=00000009 Readback ErrCtl register=00000009 Memory: 62316k/65536k available (1890k kernel code, 3188k reserved, 430k data, 132k init, 0k highmem) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:128 console [ttyS1] enabled Calibrating delay loop... 386.04 BogoMIPS (lpj=772096) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 NET: Registered protocol family 16 RALINK_GPIOMODE = 570544c4 RALINK_GPIOMODE = 570444c4 ***** Xtal 40MHz ***** start PCIe register access RALINK_RSTCTRL = 2400000 RALINK_CLKCFG1 = fdbfffc0 *************** MT7628 PCIe RC mode ************* PCIE0 enabled Port 0 N_FTS = 1b105000 init_rt2880pci done bio: create slab <bio-0> at 0 pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000) pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff 64bit] (PCI address [0x20000000-0x200fffff] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref] BAR0 at slot 0 = 0 bus=0x0, slot = 0x0 bus=0x1, slot = 0x0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Load Ralink Timer0 Module Load Ralink Timer1 Module Load Ralink Timer2 Module squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 121 io scheduler noop registered (default) Ralink gpio driver initialized Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A flash manufacture id: c8, device id 40 17 GD25Q64B(c8 40170000) (8192 Kbytes) mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 Creating 5 MTD partitions on "raspi": 0x000000000000-0x000000800000 : "ALL" 0x000000000000-0x000000020000 : "fs-uboot" 0x000000020000-0x000000110000 : "os-image" 0x000000110000-0x000000600000 : "file-system" 0x0000007f0000-0x000000800000 : "radio" TCP cubic registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 132k freed init started: BusyBox v1.19.4 (2017-06-14 11:54:08 CST) starting pid 17, tty '': '/etc/rc.d/rcS' This Board use 2.6.36.x GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x43288034 Ralink APSoC Ethernet Driver Initilization. v3.1 256 rx/tx descriptors allocated, mtu = 1500! GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x43288048 PROC INIT OK! Lan Domain: tplinkrepeater.net Lan Domain: www.tplinkrepeater.net tp_dhcp_hook: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint device eth2 entered promiscuous mode ====>>>>caldata: 76 28 DE AD 76 12 DE AD ====>>>>default mac is b0-4e-26-8d-8b-d0 ====>>>>default mac is b0-4e-26-8d-8b-d0 [main:539]send a pipe message. [daemonize:327]recv a pipe message. wifid[wifi_exec_cmd:1563]: mkdir -p /tmp/Wireless/RT2860 wifid[wifi_exec_cmd:1563]: cp /etc_ro/Wireless/RT2860/RT2860.dat /tmp/Wireless/RT2860/RT2860.dat [smartip_get_wifi_update_eth_bridge_status 514] open /tmp/wifi_update_eth_and_bridge file failed wifid[wifi_exec_cmd:1563]: mkdir -p /tmp/Wireless/iNIC wifid[wifi_exec_cmd:1563]: cp /etc_ro/Wireless/iNIC/iNIC_ap.dat /tmp/Wireless/iNIC/iNIC_ap.dat httpMudCreate: MUD 0x4ac650 was created httpServerCreate: try to add port 80 wifid[wifi_exec_cmd:1563]: ifconfig eth2 down wifid[wifi_exec_cmd:1563]: ifconfig eth2 hw ether B0:4E:26:8D:8B:D0 starting pid 102, tty '': '/sbin/getty ttyS1 57600' wifid[wifi_exec_cmd:1563]: ifconfig eth2 up [smartip_get_wifi_update_eth_bridge_status 514] open /tmp/wifi_update_eth_and_bridge file failed RE305 login: Raeth v3.1 (Tasklet) phy_tx_ring = 0x03037000, tx_ring = 0xa3037000 phy_rx_ring0 = 0x03038000, rx_ring0 = 0xa3038000 Gpio Mode Value: 570444c4 Gpio Mode Value: 570444c4 GMAC1_MAC_ADRH -- : 0x0000b04e GMAC1_MAC_ADRL -- : 0x268d8bd0 RT305x_ESW: Link Status Changed wifid[wifi_exec_cmd:1563]: ifconfig br0 down wifid[wifi_exec_cmd:1563]: ifconfig br0 hw ether B0:4E:26:8D:8B:D0 wifid[wifi_exec_cmd:1563]: ifconfig br0 up br0: port 1(eth2) entering forwarding state br0: port 1(eth2) entering forwarding state wifid[wifi_exec_cmd:1563]: insmod /lib/modules/2.6.36.x/kernel/mt_wifi.ko MT7628--> === pAd = c0508000, size = 1413224 === <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x <-- RTMPAllocAdapterBlock, Status=0 MT7628-->RtmpChipOpsHook(492): Not support for HIF_MT yet! MT7628-->mt7628_init()--> MT7628-->mt7628_init(FW(8a00), HW(8a01), CHIPID(7628)) MT7628-->e2.bin mt7628_init(1135)::(2), pChipCap->fw_len(63888) MT7628-->mt_bcn_buf_init(218): Not support for HIF_MT yet! MT7628--><--mt7628_init() wifid[wifi_exec_cmd:1563]: insmod /lib/modules/2.6.36.x/kernel/rlt_wifi.ko MT7612E-->register rt2860 MT7612E--> === pAd = c0c82000, size = 1726288 === <-- RTMPAllocTxRxRingMemory, Status=0 <-- RTMPAllocAdapterBlock, Status=0 MT7612E-->pAd->CSRBaseAddress =0xc0b80000, csr_addr=0xc0b80000! MT7612E-->device_id =0x7662 MT7612E-->==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a MT7612E-->E2pAccessMode=2 MT7612E-->cfg_mode=14 MT7612E-->cfg_mode=14 MT7612E-->wmode_band_equal(): Band Not Equal! MT7612E-->APSDCapable[0]=1 MT7612E-->APSDCapable[1]=1 MT7612E-->APSDCapable[2]=1 MT7612E-->APSDCapable[3]=1 MT7612E-->APSDCapable[4]=1 MT7612E-->APSDCapable[5]=1 MT7612E-->APSDCapable[6]=1 MT7612E-->APSDCapable[7]=1 MT7612E-->APSDCapable[8]=1 MT7612E-->APSDCapable[9]=1 MT7612E-->APSDCapable[10]=1 MT7612E-->APSDCapable[11]=1 MT7612E-->APSDCapable[12]=1 MT7612E-->APSDCapable[13]=1 MT7612E-->APSDCapable[14]=1 MT7612E-->APSDCapable[15]=1 MT7612E-->default ApCliAPSDCapable[0]=1 MT7612E-->Key1Str is Invalid key length(0) or Type(0) MT7612E-->Key2Str is Invalid key length(0) or Type(0) MT7612E-->Key3Str is Invalid key length(0) or Type(0) MT7612E-->Key4Str is Invalid key length(0) or Type(0) MT7612E-->RTMPSetSingleSKUParameters - the country region is 5. MT7612E-->RTMPSetSingleSKUParameters - country code is DE . MT7612E-->RTMPSetSingleSKUParameters - the country DFSType is 0. MT7612E-->Loading SKU file: /etc_ro/Wireless/iNIC/SingleSKU_5G_CE.dat MT7612E-->RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 MT7612E-->NVM is FLASH mode (pAd->flash_offset = 0x48000) MT7612E-->get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai wifid[wifi_exec_cmd:1563]: smp.sh wifi wifid[wifi_exec_cmd:1563]: ifconfig ra0 up MT7628-->TX_BCN DESC a30a2000 size = 320 MT7628-->RX[0] DESC a30a5000 size = 1024 MT7628-->RX[1] DESC a30a6000 size = 1024 MT7628-->AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD MT7628-->Smart Carrier Sense = 1 MT7628-->RTMPSetSingleSKUParameters - the country region is 5. MT7628-->RTMPSetSingleSKUParameters - country code is DE . MT7628-->RTMPSetSingleSKUParameters - the country DFSType is 0. MT7628-->Loading SKU file: /etc_ro/Wireless/RT2860/SingleSKU_2G_CE.dat MT7628-->load fw image from fw_header_image MT7628-->AndesMTLoadFwMethod1(2182)::pChipCap->fw_len(63888) MT7628-->FW Version:MT7628-->2MT7628-->0MT7628-->1MT7628-->5MT7628-->1MT7628-->2MT7628-->0MT7628-->1MT7628-->MT7628-->MT7628--> MT7628-->FW Build Date:MT7628-->2MT7628-->0MT7628-->1MT7628-->5MT7628-->1MT7628-->2MT7628-->0MT7628-->1MT7628-->1MT7628-->8MT7628-->3MT7628-->6MT7628-->4MT7628-->1MT7628-->MT7628--> MT7628-->CmdAddressLenReq:(ret = 0) MT7628-->CmdFwStartReq: override = 1, address = 1048576 MT7628-->CmdStartDLRsp: WiFI FW Download Success MT7628-->MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 MT7628-->RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4 MT7628-->RtmpEepromGetDefault::e2p_dafault=2 MT7628-->RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2 MT7628-->NVM is FLASH mode MT7628-->1. Phy Mode = 14 MT7628-->Country Region from e2p = ffff tssi_1_target_pwr_g_band = 33 MT7628-->2. Phy Mode = 14 MT7628-->3. Phy Mode = 14 MT7628-->NICInitPwrPinCfg(11): Not support for HIF_MT yet! MT7628-->NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet! MT7628-->MtAsicInitMac()--> MT7628-->mt7628_init_mac_cr()--> MT7628-->MtAsicSetMacMaxLen(1276): Set the Max RxPktLen=1024! MT7628-->AntCfgInit(2947): Not support for HIF_MT yet! MT7628-->MCS Set = ff ff 00 00 01 MT7628-->MtAsicSetChBusyStat(861): Not support for HIF_MT yet! MT7628-->[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 MT7628-->MtAsicSetRalinkBurstMode(3051): Not support for HIF_MT yet! MT7628-->MtAsicSetPiggyBack(796): Not support for HIF_MT yet! MT7628-->MtAsicSetTxPreamble(3030): Not support for HIF_MT yet! MT7628-->CmdSlotTimeSet:(ret = 0) MT7628-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7628-->MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0 MT7628-->Main bssid = b0:4e:26:8d:8b:d1 <==== rt28xx_init, Status=0 MT7628-->@@@ ed_monitor_init : ===> MT7628-->@@@ ed_monitor_init : <=== MT7628-->mt7628_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f, EDCCA_Status=1 MT7628-->WiFi Startup Cost (ra0): 1.472s MT7628--> ==== EDCCA CERT @@@ ed_status_read: EDCCA TH - H pAd->ed_trigger_cnt : 0 > 20 || pAd->ed_big_rssi_stat : 0 < 50 ==== wifid[wifi_exec_cmd:1563]: brctl addif br0 ra0 device ra0 entered promiscuous mode br0: port 2(ra0) entering forwarding state br0: port 2(ra0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig apcli0 up MT7628-->AddTxSType: already registered TxSType (PID = 32, Format = 0 MT7628-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 wifid[wifi_exec_cmd:1563]: brctl addif br0 apcli0 device apcli0 entered promiscuous mode br0: port 3(apcli0) entering forwarding state br0: port 3(apcli0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig rai0 up MT7612E-->build time = 20141115060606a MT7612E-->rom patch for E3 IC MT7612E--> MT7612E-->platform = ALPS MT7612E-->hw/sw version = �� MT7612E-->patch version =  MT7612E-->FW Version:0.0.00 MT7612E-->Build:1 MT7612E-->Build Time:201511101431____ MT7612E-->fw for E3 IC MT7612E-->RX[0] DESC a25d4000 size = 4096 MT7612E-->RX[1] DESC a25d5000 size = 4096 MT7612E-->E2pAccessMode=2 MT7612E-->cfg_mode=14 MT7612E-->cfg_mode=14 MT7612E-->wmode_band_equal(): Band Not Equal! MT7612E-->APSDCapable[0]=1 MT7612E-->APSDCapable[1]=1 MT7612E-->APSDCapable[2]=1 MT7612E-->APSDCapable[3]=1 MT7612E-->APSDCapable[4]=1 MT7612E-->APSDCapable[5]=1 MT7612E-->APSDCapable[6]=1 MT7612E-->APSDCapable[7]=1 MT7612E-->APSDCapable[8]=1 MT7612E-->APSDCapable[9]=1 MT7612E-->APSDCapable[10]=1 MT7612E-->APSDCapable[11]=1 MT7612E-->APSDCapable[12]=1 MT7612E-->APSDCapable[13]=1 MT7612E-->APSDCapable[14]=1 MT7612E-->APSDCapable[15]=1 MT7612E-->default ApCliAPSDCapable[0]=1 MT7612E-->Key1Str is Invalid key length(0) or Type(0) MT7612E-->Key2Str is Invalid key length(0) or Type(0) MT7612E-->Key3Str is Invalid key length(0) or Type(0) MT7612E-->Key4Str is Invalid key length(0) or Type(0) MT7612E-->RTMPSetSingleSKUParameters - the country region is 5. MT7612E-->RTMPSetSingleSKUParameters - country code is DE . MT7612E-->RTMPSetSingleSKUParameters - the country DFSType is 0. MT7612E-->Loading SKU file: /etc_ro/Wireless/iNIC/SingleSKU_5G_CE.dat MT7612E-->1. Phy Mode = 49 MT7612E-->get_chl_grp:illegal channel (167) MT7612E-->get_chl_grp:illegal channel (167) MT7612E-->get_chl_grp:illegal channel (169) MT7612E-->get_chl_grp:illegal channel (169) MT7612E-->get_chl_grp:illegal channel (171) MT7612E-->get_chl_grp:illegal channel (171) Mt7612E--> mt76x2_read_chl_pwr:2986 assert (ad->TxPower[choffset].Channel == 42)failed MT7612E-->Country Region from e2p = ffff MT7612E-->mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=0, ePA_type=3 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=0, low_temp_slope=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=0, tc_upper_bound=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0 MT7612E-->mt76x2_get_external_lna_gain::LNA type=0x11, BLNAGain=0x0, ALNAGain0=0xffffff81, ALNAGain1=0x0, ALNAGain2=0x0 MT7612E-->2. Phy Mode = 49 MT7612E-->3. Phy Mode = 49 MT7612E-->andes_pci_fw_init MT7612E-->0x1300 = 00073200 MT7612E-->AntCfgInit: primary/secondary ant 0/1 MT7612E-->andes_load_cr:cr_type(2) MT7612E-->ChipStructAssign(): MT76x2 hook ! MT7612E-->MCS Set = ff ff 00 00 01 MT7612E-->mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 MT7612E-->TX0 power compensation = 0x38 MT7612E-->TX1 power compensation = 0x38 MT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== MT7612E-->Main bssid = b0:4e:26:8d:8b:d2 MT7612E-->mt76x2_reinit_agc_gain:original agc_vga0 = 0x5a, agc_vga1 = 0x5a MT7612E-->mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5a, agc_vga1 = 0x5a MT7612E-->mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x28, hi_lna1 = 0x28 MT7612E-->mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x28, hi_lna1 = 0x28 MT7612E-->original vga value(chain0) = 5a MT7612E-->original vga value(chain1) = 5a <==== rt28xx_init, Status=0 MT7612E-->get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=apclii MT7612E-->RTMPDrvOpen(1):Check if PDMA is idle! MT7612E-->RTMPDrvOpen(2):Check if PDMA is idle! MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== Number of Packet Allocated in open = 531 Number of Packet Freed in open = 18 wifid[wifi_exec_cmd:1563]: brctl addif br0 rai0 device rai0 entered promiscuous mode br0: port 4(rai0) entering forwarding state br0: port 4(rai0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig apclii0 up wifid[wifi_exec_cmd:1563]: brctl addif br0 apclii0 device apclii0 entered promiscuous mode br0: port 5(apclii0) entering forwarding state br0: port 5(apclii0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig apcli0 down br0: port 3(apcli0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig ra0 down MT7628-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7628-->MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 MT7628-->MtAsicSetPiggyBack(796): Not support for HIF_MT yet! MT7628-->tx_kickout_fail_count = 0 MT7628-->tx_timeout_fail_count = 0 MT7628-->rx_receive_fail_count = 0 MT7628-->alloc_cmd_msg = 45 MT7628-->free_cmd_msg = 45 br0: port 2(ra0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig ra0 up MT7628-->TX_BCN DESC a30a2000 size = 320 MT7628-->RX[0] DESC a30a5000 size = 1024 MT7628-->RX[1] DESC a30a6000 size = 1024 MT7628-->AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD MT7628-->Smart Carrier Sense = 1 MT7628-->RTMPSetSingleSKUParameters - the country region is 5. MT7628-->RTMPSetSingleSKUParameters - country code is DE . MT7628-->RTMPSetSingleSKUParameters - the country DFSType is 0. MT7628-->Loading SKU file: /etc_ro/Wireless/RT2860/SingleSKU_2G_CE.dat MT7628-->load fw image from fw_header_image MT7628-->AndesMTLoadFwMethod1(2182)::pChipCap->fw_len(63888) MT7628-->FW Version:MT7628-->2MT7628-->0MT7628-->1MT7628-->5MT7628-->1MT7628-->2MT7628-->0MT7628-->1MT7628-->MT7628-->MT7628--> MT7628-->FW Build Date:MT7628-->2MT7628-->0MT7628-->1MT7628-->5MT7628-->1MT7628-->2MT7628-->0MT7628-->1MT7628-->1MT7628-->8MT7628-->3MT7628-->6MT7628-->4MT7628-->1MT7628-->MT7628--> MT7628-->CmdReStartDLRsp: WiFI FW Download Success MT7628-->CmdAddressLenReq:(ret = 0) MT7628-->CmdFwStartReq: override = 1, address = 1048576 MT7628-->CmdStartDLRsp: WiFI FW Download Success MT7628-->MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 MT7628-->RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4 MT7628-->RtmpEepromGetDefault::e2p_dafault=2 MT7628-->RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2 MT7628-->NVM is FLASH mode MT7628-->1. Phy Mode = 14 MT7628-->Country Region from e2p = ffff tssi_1_target_pwr_g_band = 33 MT7628-->2. Phy Mode = 14 MT7628-->3. Phy Mode = 14 MT7628-->NICInitPwrPinCfg(11): Not support for HIF_MT yet! MT7628-->NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet! MT7628-->MtAsicInitMac()--> MT7628-->mt7628_init_mac_cr()--> MT7628-->MtAsicSetMacMaxLen(1276): Set the Max RxPktLen=1024! MT7628-->AntCfgInit(2947): Not support for HIF_MT yet! MT7628-->MCS Set = ff ff 00 00 01 MT7628-->MtAsicSetChBusyStat(861): Not support for HIF_MT yet! MT7628-->[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 MT7628-->MtAsicSetRalinkBurstMode(3051): Not support for HIF_MT yet! MT7628-->MtAsicSetPiggyBack(796): Not support for HIF_MT yet! MT7628-->MtAsicSetTxPreamble(3030): Not support for HIF_MT yet! MT7628-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7628-->MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0 MT7628-->Main bssid = b0:4e:26:8d:8b:d1 <==== rt28xx_init, Status=0 MT7628-->@@@ ed_monitor_init : ===> MT7628-->@@@ ed_monitor_init : <=== MT7628-->mt7628_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f, EDCCA_Status=1 MT7628-->WiFi Startup Cost (ra0): 1.472s MT7628--> ==== EDCCA CERT @@@ ed_status_read: EDCCA TH - H pAd->ed_trigger_cnt : 0 > 20 || pAd->ed_big_rssi_stat : 0 < 50 ==== br0: port 2(ra0) entering forwarding state br0: port 2(ra0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig apcli0 up MT7628-->AddTxSType: already registered TxSType (PID = 32, Format = 0 MT7628-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 br0: port 3(apcli0) entering forwarding state br0: port 3(apcli0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig apclii0 down br0: port 5(apclii0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig rai0 down MT7612E-->@@@ APStop: go to ed_monitor_exit()!! MT7612E-->@@@ ed_monitor_exit : ===> MT7612E-->@@@ ed_monitor_exit : <=== ERROR!!! MlmeEnqueue: fRTMP_ADAPTER_HALT_IN_PROGRESS MT7612E-->andes_pci_erasefw 201511101431____ MT7612E-->==>rlt_wlan_chip_onoff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0x20b, Reg-WlanFunCtrl=0x20b MT7612E-->RTMP_TimerListRelease: release timer obj c0c92338! MT7612E-->RTMP_TimerListRelease: release timer obj c0da2d24! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1a640! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1ce88! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1cf1c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1cfb0! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d044! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d0d8! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d16c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d200! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d294! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d328! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d3bc! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d450! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d4e4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d578! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d60c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d6a0! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d734! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1a614! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1a66c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1ce5c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1cef0! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1cf84! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d018! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d0ac! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d140! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d1d4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d268! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d2fc! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d390! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d424! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d4b8! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d54c! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d5e0! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d674! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1d708! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1a5e8! MT7612E-->RTMP_TimerListRelease: release timer obj c0c963c8! MT7612E-->RTMP_TimerListRelease: release timer obj c0c95fac! MT7612E-->RTMP_TimerListRelease: release timer obj c0c96398! MT7612E-->RTMP_TimerListRelease: release timer obj c0c966d4! MT7612E-->RTMP_TimerListRelease: release timer obj c0c96614! MT7612E-->RTMP_TimerListRelease: release timer obj c0c96644! MT7612E-->RTMP_TimerListRelease: release timer obj c0c99670! MT7612E-->RTMP_TimerListRelease: release timer obj c0c99254! MT7612E-->RTMP_TimerListRelease: release timer obj c0c99640! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9997c! MT7612E-->RTMP_TimerListRelease: release timer obj c0c998bc! MT7612E-->RTMP_TimerListRelease: release timer obj c0c998ec! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9c918! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9c4fc! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9c8e8! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9cc24! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9cb64! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9cb94! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9fbc0! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9f7a4! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9fb90! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9fecc! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9fe0c! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9fe3c! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca2e68! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca2a4c! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca2e38! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca3174! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca30b4! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca30e4! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca6110! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca5cf4! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca60e0! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca641c! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca635c! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca638c! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca93b8! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca8f9c! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca9388! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca96c4! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca9604! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca9634! MT7612E-->RTMP_TimerListRelease: release timer obj c0cac660! MT7612E-->RTMP_TimerListRelease: release timer obj c0cac244! MT7612E-->RTMP_TimerListRelease: release timer obj c0cac630! MT7612E-->RTMP_TimerListRelease: release timer obj c0cac96c! MT7612E-->RTMP_TimerListRelease: release timer obj c0cac8ac! MT7612E-->RTMP_TimerListRelease: release timer obj c0cac8dc! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1cac4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1c6a8! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1ca94! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1cdd0! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1caf4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1cb24! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1cb54! MT7612E-->RTMP_TimerListRelease: release timer obj c0d4eaa4! MT7612E-->RTMP_TimerListRelease: release timer obj c0d4eb94! MT7612E-->RTMP_TimerListRelease: release timer obj c0d4ead0! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1e884! MT7612E-->RTMP_TimerListRelease: release timer obj c0c93818! MT7612E-->RTMP_TimerListRelease: release timer obj c0c96ac0! MT7612E-->RTMP_TimerListRelease: release timer obj c0c99d68! MT7612E-->RTMP_TimerListRelease: release timer obj c0c9d010! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca02b8! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca3560! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca6808! MT7612E-->RTMP_TimerListRelease: release timer obj c0ca9ab0! MT7612E-->RTMP_TimerListRelease: release timer obj c0d1e598! MT7612E-->RTMP_TimerListRelease: release timer obj c0d27c2c! MT7612E-->RTMP_TimerListRelease: release timer obj c0e276f0! br0: port 4(rai0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig rai0 up MT7612E-->==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x208, Reg-WlanFunCtrl=0x209 MT7612E-->build time = 20141115060606a MT7612E-->rom patch for E3 IC MT7612E--> MT7612E-->platform = ALPS MT7612E-->hw/sw version = �� MT7612E-->patch version =  MT7612E-->FW Version:0.0.00 MT7612E-->Build:1 MT7612E-->Build Time:201511101431____ MT7612E-->fw for E3 IC MT7612E-->RX[0] DESC a25d4000 size = 4096 MT7612E-->RX[1] DESC a25d5000 size = 4096 MT7612E-->E2pAccessMode=2 MT7612E-->cfg_mode=14 MT7612E-->cfg_mode=14 MT7612E-->wmode_band_equal(): Band Not Equal! MT7612E-->APSDCapable[0]=1 MT7612E-->APSDCapable[1]=1 MT7612E-->APSDCapable[2]=1 MT7612E-->APSDCapable[3]=1 MT7612E-->APSDCapable[4]=1 MT7612E-->APSDCapable[5]=1 MT7612E-->APSDCapable[6]=1 MT7612E-->APSDCapable[7]=1 MT7612E-->APSDCapable[8]=1 MT7612E-->APSDCapable[9]=1 MT7612E-->APSDCapable[10]=1 MT7612E-->APSDCapable[11]=1 MT7612E-->APSDCapable[12]=1 MT7612E-->APSDCapable[13]=1 MT7612E-->APSDCapable[14]=1 MT7612E-->APSDCapable[15]=1 MT7612E-->default ApCliAPSDCapable[0]=1 MT7612E-->Key1Str is Invalid key length(0) or Type(0) MT7612E-->Key2Str is Invalid key length(0) or Type(0) MT7612E-->Key3Str is Invalid key length(0) or Type(0) MT7612E-->Key4Str is Invalid key length(0) or Type(0) MT7612E-->RTMPSetSingleSKUParameters - the country region is 5. MT7612E-->RTMPSetSingleSKUParameters - country code is DE . MT7612E-->RTMPSetSingleSKUParameters - the country DFSType is 0. MT7612E-->Loading SKU file: /etc_ro/Wireless/iNIC/SingleSKU_5G_CE.dat Minicom2.7MT7612E-->1. Phy Mode = 49 MT7612E-->get_chl_grp:illegal channel (167) MT7612E-->get_chl_grp:illegal channel (167) MT7612E-->get_chl_grp:illegal channel (169) MT7612E-->get_chl_grp:illegal channel (169) MT7612E-->get_chl_grp:illegal channel (171) MT7612E-->get_chl_grp:illegal channel (171) Mt7612E--> mt76x2_read_chl_pwr:2986 assert (ad->TxPower[choffset].Channel == 42)failed MT7612E-->Country Region from e2p = ffff MT7612E-->mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=0, ePA_type=3 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=0, low_temp_slope=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=0, tc_upper_bound=0 MT7612E-->mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0 MT7612E-->mt76x2_get_external_lna_gain::LNA type=0x11, BLNAGain=0x0, ALNAGain0=0xffffff81, ALNAGain1=0x0, ALNAGain2=0x0 MT7612E-->2. Phy Mode = 49 MT7612E-->3. Phy Mode = 49 MT7612E-->andes_pci_fw_init MT7612E-->0x1300 = 00064300 MT7612E-->AntCfgInit: primary/secondary ant 0/1 MT7612E-->andes_load_cr:cr_type(2) MT7612E-->ChipStructAssign(): MT76x2 hook ! MT7612E-->MCS Set = ff ff 00 00 01 MT7612E-->mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 MT7612E-->TX0 power compensation = 0x38 MT7612E-->TX1 power compensation = 0x38 MT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== MT7612E-->Main bssid = b0:4e:26:8d:8b:d2 MT7612E-->mt76x2_reinit_agc_gain:original agc_vga0 = 0x5a, agc_vga1 = 0x5a MT7612E-->mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5a, agc_vga1 = 0x5a MT7612E-->mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x28, hi_lna1 = 0x28 MT7612E-->mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x28, hi_lna1 = 0x28 MT7612E-->original vga value(chain0) = 5a MT7612E-->original vga value(chain1) = 5a <==== rt28xx_init, Status=0 MT7612E-->RTMPDrvOpen(1):Check if PDMA is idle! MT7612E-->RTMPDrvOpen(2):Check if PDMA is idle! MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== Number of Packet Allocated in open = 1287 Number of Packet Freed in open = 775 br0: port 4(rai0) entering forwarding state br0: port 4(rai0) entering forwarding state wifid[wifi_exec_cmd:1563]: ifconfig apclii0 up br0: port 5(apclii0) entering forwarding state br0: port 5(apclii0) entering forwarding state wifid[wifi_exec_cmd:1563]: iwpriv ra0 set RTSThreshold=2346 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set FragThreshold=2346 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set BeaconPeriod=100 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set DtimPeriod=1 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set HtGi=1 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set BasicRate=15 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set HtBssCoex=0 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set HtAmsdu=0 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set WmmCapable=1 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set NoForwarding=0 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set NoForwardingBTNBSSID=0 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set SSID=\T\P\-\L\I\N\K\_\E\x _\.\G\H\z MT7628-->MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 MT7628-->MtAsicSetPiggyBack(796): Not support for HIF_MT yet! MT7628-->[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 MT7628-->MtAsicSetRalinkBurstMode(3051): Not support for HIF_MT yet! MT7628-->MtAsicSetPiggyBack(796): Not support for HIF_MT yet! MT7628-->MtAsicSetTxPreamble(3030): Not support for HIF_MT yet! MT7628-->AddTxSType: already registered TxSType (PID = 32, Format = 0 MT7628-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7628-->AddTxSType: already registered TxSType (PID = 6, Format = 0 MT7628-->AddTxSType: already registered TxSType (PID = 8, Format = 0 MT7628-->MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0 MT7628-->Main bssid = b0:4e:26:8d:8b:d1 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set RTSThreshold=2346 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set FragThreshold=2346 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set BeaconPeriod=100 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set DtimPeriod=1 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set HtGi=1 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set BasicRate=15 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set HtBssCoex=0 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set HtAmsdu=0 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set WmmCapable=1 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set NoForwarding=0 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set NoForwardingBTNBSSID=0 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set SSID=\T\P\-\L\I\N\K\_\E\x _\MT7612E-->G\H\z @@@ APStop: go to ed_monitor_exit()!! MT7612E-->@@@ ed_monitor_exit : ===> MT7612E-->@@@ ed_monitor_exit : <=== MT7612E-->mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 MT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== Minicom2.7wifid[wifi_exec_cmd:1563]: iwpriv rai0 set CountryCode=DE wifid[wifi_exec_cmd:1563]: iwpriv rai0 set CountryRegionABand=24 wifid[wifi_exec_cmd:1563]: iwpriv apclii0 set ApCliEnable=0 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set WirelessMode=14 MT7612E-->cfg_mode=14 MT7612E-->wmode_band_equal(): Band Equal! wifid[wifi_exec_cmd:1563]: iwpriv rai0 set HtBw=1 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set VhtBw=1 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set TxPower=100 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set AuthMode=OPEN wifid[wifi_exec_cmd:1563]: iwpriv rai0 set EncrypType=NONE wifid[wifi_exec_cmd:1563]: iwpriv rai0 set HideSSID=0 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set SSID=\T\P\-\L\I\N\K\_\E\x _\MT7612E-->G\H\z @@@ APStop: go to ed_monitor_exit()!! MT7612E-->@@@ ed_monitor_exit : ===> MT7612E-->@@@ ed_monitor_exit : <=== MT7612E-->mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42 MT7612E-->APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2) MT7612E-->mt76x2_calibration(channel = 42) MT7612E-->@@@ ed_monitor_init : ===> MT7612E-->@@@ ed_monitor_init : <=== Minicom2.7wifid[wifi_exec_cmd:1563]: iwpriv apclii0 set ApCliEnable=0 wifid[wifi_exec_cmd:1563]: iwpriv apclii0 set MACRepeaterEn=1 wifid[wifi_exec_cmd:1563]: iwpriv apclii0 set ApCliAuthMode=OPEN wifid[wifi_exec_cmd:1563]: iwpriv apclii0 set ApCliEncrypType=NONE wifid[wifi_exec_cmd:1563]: iwpriv apclii0 set ApCliSsid= wifid[wifi_exec_cmd:1563]: iwpriv apclii0 set ApCliEnable=1 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set CountryCode=DE wifid[wifi_exec_cmd:1563]: iwpriv ra0 set CountryRegion=1 wifid[wifi_exec_cmd:1563]: iwpriv apcli0 set ApCliEnable=0 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set WirelessMode=9 MT7628-->AddTxSType: already registered TxSType (PID = 32, Format = 0 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set HtBw=1 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set TxPower=100 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set AuthMode=OPEN wifid[wifi_exec_cmd:1563]: iwpriv ra0 set EncrypType=NONE wifid[wifi_exec_cmd:1563]: iwpriv ra0 set HideSSID=0 wifid[wifi_exec_cmd:1563]: iwpriv ra0 set SSID=\T\P\-\L\I\N\K\_\E\x _\.MT7628-->\G\H\z MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0 MT7628-->MtAsicSetPiggyBack(796): Not support for HIF_MT yet! MT7628-->[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 MT7628-->MtAsicSetRalinkBurstMode(3051): Not support for HIF_MT yet! MT7628-->MtAsicSetPiggyBack(796): Not support for HIF_MT yet! MT7628-->MtAsicSetTxPreamble(3030): Not support for HIF_MT yet! MT7628-->AddTxSType: already registered TxSType (PID = 32, Format = 0 MT7628-->The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2 MT7628-->AddTxSType: already registered TxSType (PID = 6, Format = 0 MT7628-->AddTxSType: already registered TxSType (PID = 8, Format = 0 MT7628-->MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0 MT7628-->Main bssid = b0:4e:26:8d:8b:d1 wifid[wifi_exec_cmd:1563]: iwpriv apcli0 set ApCliEnable=0 wifid[wifi_exec_cmd:1563]: iwpriv apcli0 set MACRepeaterEn=1 wifid[wifi_exec_cmd:1563]: iwpriv apcli0 set ApCliAuthMode=OPEN wifid[wifi_exec_cmd:1563]: iwpriv apcli0 set ApCliEncrypType=NONE wifid[wifi_exec_cmd:1563]: iwpriv apcli0 set ApCliSsid= wifid[wifi_exec_cmd:1563]: iwpriv apcli0 set ApCliEnable=1 wifid[wifi_exec_cmd:1563]: echo 1 > /tmp/wifi_mod_exist wifid[wifi_exec_cmd:1563]: echo 0 >/proc/range_extender_config/range_extender_link_state wifid[wifi_exec_cmd:1563]: echo 1 > /proc/range_extender_config/range_extender_psr_alias_rule wifid[wifi_exec_cmd:1563]: echo 0 > /proc/range_extender_config1,count is 33 /range_extender_reth_to_2g_enablea wifid[wifi0_exec_cmd:1563]:: echo 'ra0:rai0:reth2:br0:apcli0:aapclii0' > /proci/range_extender_0config/range_ext:ender_br_dev_namee th2:br0:apcli0:apclii0 wifid[wifi_exec_cmd:1563]: echo 1 >/proc/range_extender_config/range_extender_bridge_deliver_enable Set: phy[0].reg[0] = 3900 Set: phy[1].reg[0] = 3900 wifid[wifi_exec_cmd:1563]: echo 'ra0:rai0:eth2' > /proc/dhcp_hook/dhcp_hook_dev_name Set: phy[2].reg[0] = 3900 Set: phy[3].rreg[0] = 3900 Saet: phy[4].reg[00] = 3900 Set: p:hy[0].reg[0] = 3r300 ai0:eth2 Set: phy[1].reg[0] = 3300 Set: phy[2].reg[0] = 3300 Set: phy[3].reg[0] = 3300 Set: phy[4].reg[0] = 3300 Reset Mii Port Value Over. wifid[wifi_exec_cmd:1563]: wpsd wifid[wifi_exec_cmd:1563]: iwpriv ra0 set AccessPolicy=0 wifid[wifi_exec_cmd:1563]: iwpriv rai0 set AccessPolicy=0 wifid[wifi_exec_cmd:1563]: echo 1 > /tmp/wifi_acl_reload_all wifid[wifi_exec_cmd:1563]: wifi chaninfo DE wifid[wifi_exec_cmd:1563]: echo 1 > /proc/sys/vm/drop_caches </WRAP>\\ ==== OpenWrt bootlog ==== <WRAP bootlog> <nowiki>Starting kernel ... [ 0.000000] Linux version 4.14.158 (nemesis@nemesis-ThinkPad-T430) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r11617-806339a)) #0 Fri Dec 27 20:51:57 2019 [ 0.000000] Board has DDR2 [ 0.000000] Analog PMU set to hw control [ 0.000000] Digital PMU set to hw control [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc) [ 0.000000] MIPS: machine is TP-Link RE305 v1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x4a0 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000009 [ 0.000000] Readback ErrCtl register=00000009 [ 0.000000] Memory: 58372K/65536K available (3917K kernel code, 182K rwdata, 896K rodata, 1204K init, 205K bss, 7164K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] intc: using register map from devicetree [ 0.000000] CPU Clock: 580MHz [ 0.000000] timer_probe: no matching timers found [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns [ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns [ 0.015370] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.087590] pid_max: default: 32768 minimum: 301 [ 0.096958] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.109921] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.129636] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149022] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.161161] pinctrl core: initialized pinctrl subsystem [ 0.172437] NET: Registered protocol family 16 [ 0.289430] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000 [ 0.450460] PCI host bridge /pcie@10140000 ranges: [ 0.459807] MEM 0x0000000020000000..0x000000002fffffff [ 0.470117] IO 0x0000000010160000..0x000000001016ffff [ 0.499672] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.510887] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.522004] mt7621_gpio 10000600.gpio: registering 32 gpios [ 0.533803] PCI host bridge to bus 0000:00 [ 0.541766] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 0.555398] pci_bus 0000:00: root bus resource [io 0xffffffff] [ 0.567055] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.580471] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.596569] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.613013] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 0.626001] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 0.639728] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] [ 0.653144] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref] [ 0.667419] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff] [ 0.680843] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit] [ 0.695299] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref] [ 0.709558] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.719351] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] [ 0.732782] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref] [ 0.752014] clocksource: Switched to clocksource MIPS [ 0.763169] NET: Registered protocol family 2 [ 0.772550] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.786254] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.798774] TCP: Hash tables configured (established 1024 bind 1024) [ 0.811478] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.822950] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.835610] NET: Registered protocol family 1 [ 0.847813] Crashlog allocated RAM at address 0x3f00000 [ 0.859888] workingset: timestamp_bits=14 max_order=14 bucket_order=0 [ 0.879273] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.890726] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.922861] io scheduler noop registered [ 0.930473] io scheduler deadline registered (default) [ 0.941522] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.955132] console [ttyS0] disabled [ 0.962169] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A [ 0.979995] console [ttyS0] enabled [ 0.979995] console [ttyS0] enabled [ 0.993726] bootconsole [early0] disabled [ 0.993726] bootconsole [early0] disabled [ 1.010800] spi-mt7621 10000b00.spi: sys_freq: 193333333 [ 1.028501] m25p80 spi0.0: gd25q64 (8192 Kbytes) [ 1.037757] 4 fixed-partitions partitions found on MTD device spi0.0 [ 1.050344] Creating 4 MTD partitions on "spi0.0": [ 1.059847] 0x000000000000-0x000000020000 : "u-boot" [ 1.070620] 0x000000020000-0x000000600000 : "firmware" [ 1.083598] 2 tplink-fw partitions found on MTD device firmware [ 1.095380] Creating 2 MTD partitions on "firmware": [ 1.105227] 0x000000000000-0x0000001985d9 : "kernel" [ 1.116016] 0x0000001985d9-0x0000005e0000 : "rootfs" [ 1.126670] mtd: device 3 (rootfs) set to be root filesystem [ 1.139572] 1 squashfs-split partitions found on MTD device rootfs [ 1.151886] 0x0000003f0000-0x0000005e0000 : "rootfs_data" [ 1.163497] 0x000000600000-0x000000650000 : "config" [ 1.174224] 0x0000007f0000-0x000000800000 : "radio" [ 1.185474] libphy: Fixed MDIO Bus: probed [ 1.206408] rt3050-esw 10110000.esw: link changed 0x00 [ 1.218193] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [ 1.236313] NET: Registered protocol family 10 [ 1.249420] Segment Routing with IPv6 [ 1.256853] NET: Registered protocol family 17 [ 1.265755] 8021q: 802.1Q VLAN Support v1.8 [ 1.280748] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 1.301338] Freeing unused kernel memory: 1204K [ 1.310345] This architecture does not have kernel memory protection. [ 1.940371] init: Console is alive [ 1.947441] init: - watchdog - [ 2.552069] random: fast init done [ 2.623511] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 2.741925] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 2.766842] init: - preinit - [ 3.984505] rt3050-esw 10110000.esw: link changed 0x00 Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 4.166152] random: procd: uninitialized urandom read (4 bytes read) [ 8.340251] jffs2: notice: (368) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 1 orphan) and 1 of xref (1 dead, 0 orphan) found. [ 8.372256] mount_root: switching to jffs2 overlay [ 8.406640] overlayfs: upper fs does not support tmpfile. [ 8.422623] urandom-seed: Seeding with /etc/urandom.seed [ 8.546904] procd: - early - [ 8.552816] procd: - watchdog - [ 9.133151] procd: - watchdog - [ 9.139731] procd: - ubus - [ 9.223282] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.310086] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.323288] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.336960] procd: - init - Please press Enter to activate this console. [ 9.553902] rt3050-esw 10110000.esw: link changed 0x10 [ 10.162868] kmodloader: loading kernel modules from /etc/modules.d/* [ 10.205013] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.241673] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc [ 10.256740] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51 [ 10.304790] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.340516] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 10.477413] xt_time: kernel timezone is -0000 [ 10.700839] mt76_wmac 10300000.wmac: ASIC revision: 76280001 [ 10.776742] urngd: v1.0.1 started. [ 10.982468] random: crng init done [ 10.989201] random: 6 urandom warning(s) missed due to ratelimiting [ 11.754192] mt76_wmac 10300000.wmac: Firmware Version: 20151201 [ 11.765990] mt76_wmac 10300000.wmac: Build Time: 20151201183641 [ 11.792023] mt76_wmac 10300000.wmac: firmware init done [ 12.075646] mt76x2e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4 [ 12.088200] mt76x2e 0000:01:00.0: ASIC revision: 76120044 [ 13.163215] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a [ 13.180616] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 [ 13.191545] mt76x2e 0000:01:00.0: Build: 1 [ 13.199655] mt76x2e 0000:01:00.0: Build Time: 201507311614____ [ 13.232023] mt76x2e 0000:01:00.0: Firmware running! [ 13.267508] PPP generic driver version 2.4.2 [ 13.285301] NET: Registered protocol family 24 [ 13.312490] kmodloader: done loading kernel modules from /etc/modules.d/* [ 24.066173] br-lan: port 1(eth0) entered blocking state [ 24.076596] br-lan: port 1(eth0) entered disabled state [ 24.087298] device eth0 entered promiscuous mode [ 24.187132] br-lan: port 1(eth0) entered blocking state [ 24.197550] br-lan: port 1(eth0) entered forwarding state [ 24.208471] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 25.122206] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready BusyBox v1.31.1 () built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt SNAPSHOT, r11786-7116561 ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:/#


Space for additional notes, links to forum threads or other resources.

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2021/04/13 21:28
  • by borromini