Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
| toh:tp-link:tl-wr820n [2024/12/14 08:10] – Added Boot Log shankarinece | toh:tp-link:tl-wr820n [2024/12/14 08:22] (current) – Formatted Boot Log shankarinece | ||
|---|---|---|---|
| Line 24: | Line 24: | ||
| {{tag> | {{tag> | ||
| - | ===== Boot Logs ===== | + | ==== OEM bootlog (EU V1) ==== |
| - | <webcode name=" | + | <WRAP bootlog> |
| - | [DBG] sel_fine_tmp=00000008, | + | [DBG] sel_fine_tmp=00000008, |
| - | [DBG] sel_fine_tmp=00000006, | + | [DBG] sel_fine_tmp=00000006, |
| - | [03060C0F][03060C0A][7C7E0000][23244648][00232452] | + | |
| - | DU Setting Cal Done | + | DU Setting Cal Done |
| - | U-Boot 1.1.3 (Jul 19 2018 - 15:10:17) | + | |
| - | Board: Ralink APSoC DRAM: 8 MB | + | |
| - | relocate_code Pointer at: 807c4000 | + | relocate_code Pointer at: 807c4000 |
| - | flash manufacture id: c8, device id 40 14 | + | flash manufacture id: c8, device id 40 14 |
| - | find flash: GD25Q08B | + | find flash: GD25Q08B |
| - | PA/ | + | PA/ |
| - | *** Warning - bad CRC, using default environment | + | *** Warning - bad CRC, using default environment |
| - | icache: sets:512, ways:4, linesz:32 , | + | |
| - | dcache: sets:256, ways:4, linesz:32 , | + | dcache: sets:256, ways:4, linesz:32 , |
| - | RESET MT7628 PHY!!!!!! | + | RESET MT7628 PHY!!!!!! |
| - | Please choose the operation or press ctrl + c to stop auto boot: | + | Please choose the operation or press ctrl + c to stop auto boot: |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | 0 | + | |
| - | | + | |
| - | 3: System Boot system code via Flash. | + | 3: System Boot system code via Flash. |
| - | ## Booting image at bc00d000 ... | + | ## Booting image at bc00d000 ... |
| - | addr: | + | addr: |
| - | vxWorks Image. | + | vxWorks Image. |
| - | imgFileEnc=0xbc00d080, | + | imgFileEnc=0xbc00d080, |
| - | enter sysGpioInit | + | enter sysGpioInit |
| - | Before exit sysClkConnect! | + | Before exit sysClkConnect! |
| - | In sysClkEnable! | + | In sysClkEnable! |
| - | Before exit sysClkEnable! | + | Before exit sysClkEnable! |
| - | Attachin | + | Attachin |
| - | g in teWrfaacie tlot0.i..n dgon ef | + | g in teWrfaacie tlot0.i..n dgon ef |
| - | or RX_DMA_BUSY status Start... done | + | or RX_DMA_BUSY status Start... done |
| - | Tx_Ring addr: 0xa05e11c0!!! | + | |
| - | Rx_Ring addr: 0xa05e0520!!! | + | |
| - | minifs.fileCount=92 | + | minifs.fileCount=92 |
| - | minifs.nameTableSize=1348 | + | minifs.nameTableSize=1348 |
| - | minifs.fileIndex=bc0c4564 | + | minifs.fileIndex=bc0c4564 |
| - | minifs.ballCount=7 | + | minifs.ballCount=7 |
| - | minifs.fileIndex initialized | + | minifs.fileIndex initialized |
| - | minifs.ballIndex initialized | + | minifs.ballIndex initialized |
| - | minifs.ballData=BC0C4CCC | + | minifs.ballData=BC0C4CCC |
| - | minifs.oemSize=274 | + | minifs.oemSize=274 |
| - | minifs.oemData=BC0F3801 | + | minifs.oemData=BC0F3801 |
| - | | + | |
| - | Software Platform for PNE2.2 | + | Software Platform for PNE2.2 |
| - | Copyright(C) 2001-2011 by TP-LINK TECHNOLOGIES CO., LTD. | + | Copyright(C) 2001-2011 by TP-LINK TECHNOLOGIES CO., LTD. |
| - | Creation date: May 6 2019, 09:56:18 | + | Creation date: May 6 2019, 09:56:18 |
| - | # eth0 macAddr = 00-19-66-FFFFFFCA-FFFFFF8B-07 | + | # eth0 macAddr = 00-19-66-FFFFFFCA-FFFFFF8B-07 |
| - | eth0 macAddr = FFFFFF98-FFFFFFDA-FFFFFFC4-FFFFFFCD-FFFFFFF8-FFFFFF90 | + | eth0 macAddr = FFFFFF98-FFFFFFDA-FFFFFFC4-FFFFFFCD-FFFFFFF8-FFFFFF90 |
| - | TimeZone=GMT+1 | + | TimeZone=GMT+1 |
| - | Decompress config 0x3d50 | + | Decompress config 0x3d50 |
| - | Vlan Table: | + | |
| - | ------------------------------------------------ | + | ------------------------------------------------ |
| - | VID | + | VID |
| - | 2 | + | 2 |
| - | 1 | + | 1 |
| - | ------------------------------------------------ | + | ------------------------------------------------ |
| - | set mii port 1 value 0x00003100 | + | |
| - | mt7628_phy_off port: 1 | + | mt7628_phy_off port: 1 |
| - | mt7628_phy_on port: 1 | + | mt7628_phy_on port: 1 |
| - | RTA_DST: | + | RTA_DST: |
| - | AF_INET 0.0.0.0 | + | AF_INET 0.0.0.0 |
| - | RTA_NETMASK: | + | RTA_NETMASK: |
| - | Not AF_INET/ | + | Not AF_INET/ |
| - | Error writing to routing socket | + | Error writing to routing socket |
| - | delete net 0.0.0.0: not in table | + | delete net 0.0.0.0: not in table |
| - | RTA_DST: | + | RTA_DST: |
| - | AF_INET 0.0.0.0 | + | AF_INET 0.0.0.0 |
| - | RTA_NETMASK: | + | RTA_NETMASK: |
| - | AF_INET 0.0.0.0 | + | AF_INET 0.0.0.0 |
| - | Error writing to routing socket | + | Error writing to routing socket |
| - | delete net default: not in table | + | delete net default: not in table |
| - | RTA_DST: | + | RTA_DST: |
| - | AF_INET 0.0.0.0 | + | AF_INET 0.0.0.0 |
| - | RTA_GATEWAY: | + | RTA_GATEWAY: |
| - | AF_INET 97.91.254.169 | + | AF_INET 97.91.254.169 |
| - | RTA_NETMASK: | + | RTA_NETMASK: |
| - | AF_INET 0.0.0.0 | + | AF_INET 0.0.0.0 |
| - | add net default: gateway 169.254.91.97 | + | add net default: gateway 169.254.91.97 |
| - | RTA_DST: | + | RTA_DST: |
| - | AF_INET 0.91.254.169 | + | AF_INET 0.91.254.169 |
| - | RTA_NETMASK: | + | RTA_NETMASK: |
| - | Not AF_INET/ | + | Not AF_INET/ |
| - | change net 169.254.91.0 | + | change net 169.254.91.0 |
| - | RTA_DST: | + | RTA_DST: |
| - | AF_INET 0.0.0.0 | + | AF_INET 0.0.0.0 |
| - | RTA_NETMASK: | + | RTA_NETMASK: |
| - | Not AF_INET/ | + | Not AF_INET/ |
| - | change net 0.0.0.0 | + | change net 0.0.0.0 |
| - | FW Version: | + | FW Version: |
| - | FW Build Date: | + | FW Build Date: |
| - | 803CFAF0: | + | 803CFAF0: |
| - | 803CFB00: | + | 803CFB00: |
| - | 803CFB10: | + | 803CFB10: |
| - | 803CFB20: | + | 803CFB20: |
| - | 803CFB30: | + | 803CFB30: |
| - | 803CFB40: | + | 803CFB40: |
| - | 803CFB50: | + | 803CFB50: |
| - | 803CFB60: | + | 803CFB60: |
| - | 803CFB70: | + | 803CFB70: |
| - | 803CFB80: | + | 803CFB80: |
| - | 803CFB90: | + | 803CFB90: |
| - | 803CFBA0: | + | 803CFBA0: |
| - | 803CFBB0: | + | 803CFBB0: |
| - | 803CFBC0: | + | 803CFBC0: |
| - | 803CFBD0: | + | 803CFBD0: |
| - | 803CFBE0: | + | 803CFBE0: |
| - | 803CFBF0: | + | 803CFBF0: |
| - | 803CFC00: | + | 803CFC00: |
| - | 803CFC10: | + | 803CFC10: |
| - | 803CFC20: | + | 803CFC20: |
| - | 803CFC30: | + | 803CFC30: |
| - | 803CFC40: | + | 803CFC40: |
| - | 803CFC50: | + | 803CFC50: |
| - | 803CFC60: | + | 803CFC60: |
| - | 803CFC70: | + | 803CFC70: |
| - | 803CFC80: | + | 803CFC80: |
| - | 803CFC90: | + | 803CFC90: |
| - | 803CFCA0: | + | 803CFCA0: |
| - | 803CFCB0: | + | 803CFCB0: |
| - | 803CFCC0: | + | 803CFCC0: |
| - | 803CFCD0: | + | 803CFCD0: |
| - | 803CFCE0: | + | 803CFCE0: |
| - | 803CFCF0: | + | 803CFCF0: |
| - | WTBL Segment 1 info: | + | WTBL Segment 1 info: |
| - | MemBaseAddr/ | + | MemBaseAddr/ |
| - | EntrySize/ | + | EntrySize/ |
| - | WTBL Segment 2 info: | + | WTBL Segment 2 info: |
| - | MemBaseAddr/ | + | MemBaseAddr/ |
| - | EntrySize/ | + | EntrySize/ |
| - | WTBL Segment 3 info: | + | WTBL Segment 3 info: |
| - | MemBaseAddr/ | + | MemBaseAddr/ |
| - | EntrySize/ | + | EntrySize/ |
| - | WTBL Segment 4 info: | + | WTBL Segment 4 info: |
| - | MemBaseAddr/ | + | MemBaseAddr/ |
| - | EntrySize/ | + | EntrySize/ |
| - | ===============qadInit=============== | + | |
| - | # | + | |
| - | # | + | # |
| - | # | + | # |
| - | # help | + | # help |
| - | ------------------------------------------------------------------------ | + | |
| - | Version = 2.0. | + | Version = 2.0. |
| - | Task name = tCmdTask, pri = 8, stack size = 10240, max command entry num = 32. | + | Task name = tCmdTask, pri = 8, stack size = 10240, max command entry num = 32. |
| - | command | + | |
| - | -------------------------------------------------------------------- | + | -------------------------------------------------------------------- |
| - | ? print all commands. | + | ? print all commands. |
| - | help print all commands. | + | help print all commands. |
| - | mem show memory part, pools, and dump memory. | + | mem show memory part, pools, and dump memory. |
| - | task show task info and manage system task. | + | task show task info and manage system task. |
| - | tftp download or upload files by tftp protocol. | + | tftp download or upload files by tftp protocol. |
| - | ifconfig | + | ifconfig |
| - | route Show route table, delete/add special route entry. | + | route Show route table, delete/add special route entry. |
| - | arp Show all arp entries, delete/add special arp entry. | + | arp Show all arp entries, delete/add special arp entry. |
| - | net Show net runtimes. | + | net Show net runtimes. |
| - | ping6 Send ICMPv6 ECHO_REQUEST to IPv6 nodes. | + | ping6 Send ICMPv6 ECHO_REQUEST to IPv6 nodes. |
| - | track Show conntrack runtimes, modify conntrack environments. | + | track Show conntrack runtimes, modify conntrack environments. |
| - | register | + | register |
| - | packet | + | packet |
| - | flash Print flash layout, read/ | + | flash Print flash layout, read/ |
| - | port manage all udp/tcp packet ports. | + | port manage all udp/tcp packet ports. |
| - | mcb Show mcb pools or blocks. | + | mcb Show mcb pools or blocks. |
| - | bridge | + | bridge |
| - | nat Show nat runtimes. | + | nat Show nat runtimes. |
| - | system | + | system |
| - | wioctl | + | wioctl |
| - | iwpriv | + | iwpriv |
| - | wpkt MTK WiFi Tx mem pool monitor utility. | + | wpkt MTK WiFi Tx mem pool monitor utility. |
| - | -------------------------------------------------------------------- | + | -------------------------------------------------------------------- |
| - | # flash layout | + | # flash layout |
| - | # flash -layout | + | |
| - | # flash -erase off len | + | # flash -erase off len |
| - | # flash -read off len buffer | + | # flash -read off len buffer |
| - | # flash -write off len buffer | + | # flash -write off len buffer |
| - | # | + | # |
| - | # -layout | + | # -layout |
| - | # -erase | + | # -erase |
| - | # -read Read specify flash segment to buffer. | + | # -read Read specify flash segment to buffer. |
| - | # -write | + | # -write |
| - | # | + | # |
| - | # off Offset of flash. | + | # off Offset of flash. |
| - | # len Length of specify flash segment. | + | # len Length of specify flash segment. |
| - | # buffer | + | # buffer |
| - | # | + | # |
| - | # | + | # |
| - | flash layout | + | flash layout |
| - | Version: 2.0 | + | |
| - | Name: FlashIo | + | Name: FlashIo |
| - | Total Size(K): 1024 | + | Total Size(K): 1024 |
| - | Erase Sector Size(K): 4 | + | Erase Sector Size(K): 4 |
| - | Block Num: 6. | + | Block Num: 6. |
| - | ================================================== | + | ================================================== |
| - | Flash Layout: | + | Flash Layout: |
| - | |------------------------| 0x00000000(0K) | + | |------------------------| 0x00000000(0K) |
| - | | | | + | | | |
| - | | | | + | | | |
| - | |BOOTIMG(52K) | + | |BOOTIMG(52K) |
| - | | | | + | | | |
| - | | | | + | | | |
| - | |------------------------| 0x0000d000(52K) | + | |------------------------| 0x0000d000(52K) |
| - | | | | + | | | |
| - | | | | + | | | |
| - | |FIRMWARE(948K) | + | |FIRMWARE(948K) |
| - | | | | + | | | |
| - | | | | + | | | |
| - | |------------------------| 0x000fa000(1000K) | + | |------------------------| 0x000fa000(1000K) |
| - | |CONFIG(8K) | + | |CONFIG(8K) |
| - | |------------------------| 0x000fc000(1008K) | + | |------------------------| 0x000fc000(1008K) |
| - | |EXPLOG(8K) | + | |EXPLOG(8K) |
| - | |------------------------| 0x000fe000(1016K) | + | |------------------------| 0x000fe000(1016K) |
| - | |PROFILE(4K) | + | |PROFILE(4K) |
| - | |------------------------| 0x000ff000(1020K) | + | |------------------------| 0x000ff000(1020K) |
| - | |RADIO(4K) | + | |RADIO(4K) |
| - | |------------------------| 0x00100000(1024K) | + | |------------------------| 0x00100000(1024K) |
| - | # ? | + | # ? |
| - | ------------------------------------------------------------------------ | + | |
| - | Version = 2.0. | + | Version = 2.0. |
| - | Task name = tCmdTask, pri = 8, stack size = 10240, max command entry num = 32. | + | Task name = tCmdTask, pri = 8, stack size = 10240, max command entry num = 32. |
| - | command | + | |
| - | -------------------------------------------------------------------- | + | -------------------------------------------------------------------- |
| - | ? print all commands. | + | ? print all commands. |
| - | help print all commands. | + | help print all commands. |
| - | mem show memory part, pools, and dump memory. | + | mem show memory part, pools, and dump memory. |
| - | task show task info and manage system task. | + | task show task info and manage system task. |
| - | tftp download or upload files by tftp protocol. | + | tftp download or upload files by tftp protocol. |
| - | ifconfig | + | ifconfig |
| - | route Show route table, delete/add special route entry. | + | route Show route table, delete/add special route entry. |
| - | arp Show all arp entries, delete/add special arp entry. | + | arp Show all arp entries, delete/add special arp entry. |
| - | net Show net runtimes. | + | net Show net runtimes. |
| - | ping6 Send ICMPv6 ECHO_REQUEST to IPv6 nodes. | + | ping6 Send ICMPv6 ECHO_REQUEST to IPv6 nodes. |
| - | track Show conntrack runtimes, modify conntrack environments. | + | track Show conntrack runtimes, modify conntrack environments. |
| - | register | + | register |
| - | packet | + | packet |
| - | flash Print flash layout, read/ | + | flash Print flash layout, read/ |
| - | port manage all udp/tcp packet ports. | + | port manage all udp/tcp packet ports. |
| - | mcb Show mcb pools or blocks. | + | mcb Show mcb pools or blocks. |
| - | bridge | + | bridge |
| - | nat Show nat runtimes. | + | nat Show nat runtimes. |
| - | system | + | system |
| - | wioctl | + | wioctl |
| - | iwpriv | + | iwpriv |
| - | wpkt MTK WiFi Tx mem pool monitor utility. | + | wpkt MTK WiFi Tx mem pool monitor utility. |
| - | -------------------------------------------------------------------- | + | -------------------------------------------------------------------- |
| - | # mem | + | # mem |
| - | # mem -show [sys | dada | object] | + | |
| - | # mem -dump start size | + | # mem -dump start size |
| - | # mem -md start value | + | # mem -md start value |
| - | # | + | # |
| - | # -show Displays alloced/ | + | # -show Displays alloced/ |
| - | # -dump dump specify memory block. | + | # -dump dump specify memory block. |
| - | # -md copy specify memory block to specify address. | + | # -md copy specify memory block to specify address. |
| - | # | + | # |
| - | # start Start address of specify memory block, in hex. | + | # start Start address of specify memory block, in hex. |
| - | # size Size of specify memory block, in hex. | + | # size Size of specify memory block, in hex. |
| - | # value value in UINT32 format. | + | # value value in UINT32 format. |
| - | # object | + | # object |
| - | # | + | # |
| - | # Example: | + | # Example: |
| - | # mem -dump 80010000 1000 .... Show memory block start at 0x80010000 which size of 4k. | + | # mem -dump 80010000 1000 .... Show memory block start at 0x80010000 which size of 4k. |
| - | # mem -show eth 1 .... Show netpool of end object eth1. | + | # mem -show eth 1 .... Show netpool of end object eth1. |
| - | # mem -show | + | # mem -show |
| - | FREE LIST: | + | |
| - | | + | |
| - | ---- ---------- ---------- | + | ---- ---------- ---------- |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | | + | |
| - | 10 0x8045e5c0 | + | 10 0x8045e5c0 |
| - | 11 0x8045df80 | + | 11 0x8045df80 |
| - | 12 0x801d69c0 | + | 12 0x801d69c0 |
| - | SUMMARY: | + | |
| - | | + | |
| - | | + | |
| - | current | + | current |
| - | | + | |
| - | alloc 6422016 | + | alloc 6422016 |
| - | cumulative | + | cumulative |
| - | alloc | + | alloc |
| - | # ifconfig | + | # ifconfig |
| + | |||
| + | # ifconfig -show [devName devNum] | ||
| + | # ifconfig -attach devName devNum | ||
| + | # ifconfig -detach devName devNum | ||
| + | # ifconfig -napt devName devNum up|down | ||
| + | # ifconfig -param | ||
| + | # | ||
| + | # -show Show specify or all interface. | ||
| + | # -attach | ||
| + | # -detach | ||
| + | # -napt | ||
| + | # | ||
| + | # param | ||
| + | # | ||
| + | # Example: | ||
| + | # ifconfig eth1 inet 172.31.70.103 netmask 255.255.255.0 | ||
| + | # .... Call ifconfig, and pass | ||
| + | # "eth1 inet 172.31.70.103 netmask 255.255.255.0" | ||
| + | # ifconfig -show eth 1 .... Show interface eth1. | ||
| + | # | ||
| + | ifconfig -show | ||
| + | lo (unit number 0): | ||
| + | | ||
| + | Type: SOFTWARE_LOOPBACK | ||
| + | inet: 127.0.0.1 | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | 0 packets received; 0 packets sent | ||
| + | 0 multicast packets received | ||
| + | 0 multicast packets sent | ||
| + | 0 input errors; 0 output errors | ||
| + | 0 collisions; 0 dropped | ||
| + | 0 output queue drops | ||
| + | mirror (unit number 0): | ||
| + | | ||
| + | Type: ETHERNET_CSMACD | ||
| + | inet: 192.168.0.1 | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | 0 octets received | ||
| + | 0 octets sent | ||
| + | 0 unicast packets received | ||
| + | 23 unicast packets sent | ||
| + | 0 non-unicast packets received | ||
| + | 20 non-unicast packets sent | ||
| + | 0 incoming packets discarded | ||
| + | 0 outgoing packets discarded | ||
| + | 0 incoming errors | ||
| + | 0 outgoing errors | ||
| + | 0 unknown protos | ||
| + | 0 collisions; 0 dropped | ||
| + | 0 output queue drops | ||
| + | eth (unit number 1): | ||
| + | | ||
| + | Type: ETHERNET_CSMACD | ||
| + | inet: 169.254.91.97 | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | | ||
| + | 0 octets received | ||
| + | 64 octets sent | ||
| + | 0 unicast packets received | ||
| + | 1 unicast packets sent | ||
| + | 0 non-unicast packets received | ||
| + | 0 non-unicast packets sent | ||
| + | 0 incoming packets discarded | ||
| + | 0 outgoing packets discarded | ||
| + | 0 incoming errors | ||
| + | 0 outgoing errors | ||
| + | 0 unknown protos | ||
| + | 0 collisions; 0 dropped | ||
| + | 0 output queue drops | ||
| + | ppp (unit number 0): | ||
| + | | ||
| + | Type: PPP | ||
| + | | ||
| + | | ||
| + | 0 octets received | ||
| + | 0 octets sent | ||
| + | 0 unicast packets received | ||
| + | 0 unicast packets sent | ||
| + | 0 non-unicast packets received | ||
| + | 0 non-unicast packets sent | ||
| + | 0 incoming packets discarded | ||
| + | 0 outgoing packets discarded | ||
| + | 0 incoming errors | ||
| + | 0 outgoing errors | ||
| + | 0 unknown protos | ||
| + | 0 output queue drops | ||
| + | |||
| + | </ | ||
| - | # ifconfig -show [devName devNum] | ||
| - | # ifconfig -attach devName devNum | ||
| - | # ifconfig -detach devName devNum | ||
| - | # ifconfig -napt devName devNum up|down | ||
| - | # ifconfig -param | ||
| - | # | ||
| - | # -show Show specify or all interface. | ||
| - | # -attach | ||
| - | # -detach | ||
| - | # -napt | ||
| - | # | ||
| - | # param | ||
| - | # | ||
| - | # Example: | ||
| - | # ifconfig eth1 inet 172.31.70.103 netmask 255.255.255.0 | ||
| - | # .... Call ifconfig, and pass | ||
| - | # "eth1 inet 172.31.70.103 netmask 255.255.255.0" | ||
| - | # ifconfig -show eth 1 .... Show interface eth1. | ||
| - | # | ||
| - | ifconfig -show | ||
| - | lo (unit number 0): | ||
| - | | ||
| - | Type: SOFTWARE_LOOPBACK | ||
| - | inet: 127.0.0.1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | 0 packets received; 0 packets sent | ||
| - | 0 multicast packets received | ||
| - | 0 multicast packets sent | ||
| - | 0 input errors; 0 output errors | ||
| - | 0 collisions; 0 dropped | ||
| - | 0 output queue drops | ||
| - | mirror (unit number 0): | ||
| - | | ||
| - | Type: ETHERNET_CSMACD | ||
| - | inet: 192.168.0.1 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | 0 octets received | ||
| - | 0 octets sent | ||
| - | 0 unicast packets received | ||
| - | 23 unicast packets sent | ||
| - | 0 non-unicast packets received | ||
| - | 20 non-unicast packets sent | ||
| - | 0 incoming packets discarded | ||
| - | 0 outgoing packets discarded | ||
| - | 0 incoming errors | ||
| - | 0 outgoing errors | ||
| - | 0 unknown protos | ||
| - | 0 collisions; 0 dropped | ||
| - | 0 output queue drops | ||
| - | eth (unit number 1): | ||
| - | | ||
| - | Type: ETHERNET_CSMACD | ||
| - | inet: 169.254.91.97 | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | | ||
| - | 0 octets received | ||
| - | 64 octets sent | ||
| - | 0 unicast packets received | ||
| - | 1 unicast packets sent | ||
| - | 0 non-unicast packets received | ||
| - | 0 non-unicast packets sent | ||
| - | 0 incoming packets discarded | ||
| - | 0 outgoing packets discarded | ||
| - | 0 incoming errors | ||
| - | 0 outgoing errors | ||
| - | 0 unknown protos | ||
| - | 0 collisions; 0 dropped | ||
| - | 0 output queue drops | ||
| - | ppp (unit number 0): | ||
| - | | ||
| - | Type: PPP | ||
| - | | ||
| - | | ||
| - | 0 octets received | ||
| - | 0 octets sent | ||
| - | 0 unicast packets received | ||
| - | 0 unicast packets sent | ||
| - | 0 non-unicast packets received | ||
| - | 0 non-unicast packets sent | ||
| - | 0 incoming packets discarded | ||
| - | 0 outgoing packets discarded | ||
| - | 0 incoming errors | ||
| - | 0 outgoing errors | ||
| - | 0 unknown protos | ||
| - | 0 output queue drops | ||
| - | </ | ||