Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:tp-link:tl-wr810n [2020/01/31 13:27] – [TL-WR810N(EU) 1.1] creattoh:tp-link:tl-wr810n [2022/06/25 12:07] – [Opening the case] High Voltage warning infobox added tmomas
Line 26: Line 26:
 ===== Installation ===== ===== Installation =====
  
-<color #ed1c24>**Beware:**</color> ath79 Image for the TL-WR810N v1.1 (EU) is currently broken and will result in a **<color #ed1c24>soft-bricked device</color>**. Use the ar71xx image (http://downloads.openwrt.org/releases/19.07.0/targets/ar71xx/generic/) instead! See thread: https://forum.openwrt.org/t/tp-link-tl-wr810n-v1-ath79/48267+<color #ed1c24>**Beware:**</color> ath79 Image for the TL-WR810N v1.1 (EU) is currently broken and will result in a **<color #ed1c24>soft-bricked device</color>**. Use the ar71xx image (http://downloads.openwrt.org/releases/19.07.7/targets/ar71xx/generic/) instead! See thread: https://forum.openwrt.org/t/tp-link-tl-wr810n-v1-ath79/48267. **Update:** OpenWRT 19.07.7 ath79 now does not result in a boot-loop on this device, but USB will not provide power. Snapshots from 27.2.2021 onward have USB-power-issue fixed, 21.02-rc2 should also have it fixed, see: [[commit>?p=openwrt/openwrt.git;a=commitdiff;h=62099d98e4746d8a4e9ee79360314c1900c8974e]].
  
 Recovery after this soft-brick may be possible via the tftpd method (see below). Recovery after this soft-brick may be possible via the tftpd method (see below).
Line 49: Line 49:
  
   * Connect one of the ethernet ports to a host computer.   * Connect one of the ethernet ports to a host computer.
-  * Change your host computer's IP address to **192.168.0.66/32**. Note that the WR810N will have the IP address **192.168.0.86/32**+  * Change your host computer's IP address to **192.168.0.66/24**. Note that the WR810N will have the IP address **192.168.0.86/24**.
   * Run a TFTP server on your host computer.   * Run a TFTP server on your host computer.
   * Rename the OpenWrt factory image to **wr810nv1_tp_recovery.bin** and make it available via the TFTP server.   * Rename the OpenWrt factory image to **wr810nv1_tp_recovery.bin** and make it available via the TFTP server.
Line 111: Line 111:
  
 === Opening the Case === === Opening the Case ===
 +
 +{{page>meta:infobox:high_voltage&noheader&nofooter&noeditbtn}}
  
 Start by inserting a pry tool above the ethernet connectors. Lift the lid, work in counterclockwise direction. Don't be afraid to apply quite some force, in particular at the corners of the case. Start by inserting a pry tool above the ethernet connectors. Lift the lid, work in counterclockwise direction. Don't be afraid to apply quite some force, in particular at the corners of the case.
Line 713: Line 715:
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>QCA9531 8Flash 32RAM 64RAM}}+{{tag>QCA9531 8Flash 32RAM 64RAM mains_powered}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1