Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Serial log of flash procedure ====== ===== Version 1.x ===== <file> U-Boot 1.1.4 (Nov 17 2009 - 11:56:26) AP83 (ar9100) U-boot 0.0.11 DRAM: sri 32 MB id read 0x100000ff flash size 8MB, sector count = 128 Flash: 8 MB Using default environment In: serial Out: serial Err: serial Net: ag7100_enet_initialize... No valid address in Flash. Using fixed address : cfg1 0xf cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up eth0 Autobooting in 1 secondsar7100> erase 0xbf020000 +7c0000 First 0x2 last 0x7d sector size 0x10000 125 Erased 124 sectors ar7100> ar7100> tftpboot 0x81000000 code.bin dup 1 speed 1000 Using eth0 device TFTP from server 192.168.0.5; our IP address is 192.168.0.2 Filename 'code.bin'. Load address: 0x81000000 Loading: T T T checksum bad T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################ done Bytes transferred = 8126464 (7c0000 hex) ar7100> ar7100> cp.b 0x81000000 0xbf020000 0x7c0000 Copy to Flash... write addr: bf020000 done ar7100> bootm 0xbf020000 ## Booting image at bf020000 ... Uncompressing Kernel Image ... OK Starting kernel ... Linux version 2.6.32.10 (openwrt@wrt1.marcant.net) (gcc version 4.3.3 (GCC) ) #20 Tue Apr 6 15:01:26 CEST 2010 bootconsole [early0] enabled CPU revision is: 00019374 (MIPS 24Kc) Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Initrd not found or empty - disabling initrd Zone PFN ranges: Normal 0x00000000 -> 0x00002000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00002000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND PID hash table entries: 128 (order: -3, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=00000000 Readback ErrCtl register=00000000 Memory: 29332k/32768k available (2101k kernel code, 3436k reserved, 397k data, 152k init, 0k highmem) SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:56 Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200) Mount-cache hash table entries: 512 NET: Registered protocol family 16 MIPS: machine is TP-LINK TL-WR1043ND bio: create slab <bio-0> at 0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) ■■ 2001-2006 Red Hat, Inc. yaffs Mar 28 2010 17:53:41 Installing. msgmni has been set to 57 io scheduler noop registered io scheduler deadline registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Atheros AR71xx SPI Controller driver version 0.2.4 m25p80 spi0.0: s25sl064a (8192 Kbytes) Searching for RedBoot partition table in spi0.0 at offset 0x7f0000 No RedBoot partition table detected in spi0.0 spi0.0: no WRT160NL signature found Creating 5 MTD partitions on "spi0.0": 0x000000000000-0x000000020000 : "u-boot" 0x000000020000-0x000000160000 : "kernel" 0x000000160000-0x0000007f0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=2A0000, len=550000 0x0000002a0000-0x0000007f0000 : "rootfs_data" 0x0000007f0000-0x000000800000 : "art" 0x000000020000-0x0000007f0000 : "firmware" Realtek RTL8366RB ethernet switch driver version 0.2.0 rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK) rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found rtl8366-rtl: probed eth0: Atheros AG71xx at 0xb9000000, irq 4 Atheros AR71xx hardware watchdog driver version 0.1.0 TCP westwood registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing unused kernel memory: 152k freed Please be patient, while OpenWrt loads ... gpio-buttons driver version 0.1.2 input: gpio-buttons as /devices/platform/gpio-buttons/input/input0 Button Hotplug driver version 0.3.1 eth0: link up (1000Mbps/Full duplex) - preinit - Registered led device: tl-wr1043nd:green:usb Registered led device: tl-wr1043nd:green:system Registered led device: tl-wr1043nd:green:qss Registered led device: tl-wr1043nd:green:wlan Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - jffs2 not ready yet; using ramdisk mini_fo: using base directory: / mini_fo: using storage directory: /tmp/root - init - eth0: link down Please press Enter to activate this console. eth0: link up (1000Mbps/Full duplex) device eth0.1 entered promiscuous mode device eth0 entered promiscuous mode br-lan: port 1(eth0.1) entering forwarding state PPP generic driver version 2.4.2 ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 24 nf_conntrack version 0.5.0 (460 buckets, 1840 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 jffs2_build_filesystem(): unlocking the mtd device... done. jffs2_build_filesystem(): erasing all blocks after the end marker... done. mini_fo: using base directory: / mini_fo: using storage directory: /overlay </file> ===== Version 2.x ===== <file> U-Boot 1.1.4 (Jul 17 2015 - 14:31:22) ap135 - Scorpion 1.0DRAM: sri Scorpion 1.0 ath_ddr_initial_config(178): (16bit) ddr2 init tap = 0x00000003 Tap (low, high) = (0x0, 0x1e) Tap values = (0xf, 0xf, 0xf, 0xf) 64 MB Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x17 flash size 8MB, sector count = 128 Flash: 8 MB Using default environment *** Warning *** : PCIe WLAN Module not found !!! *** Warning *** : PCIe WLAN Module not found !!! In: serial Out: serial Err: serial Net: ath_gmac_enet_initialize... athrs_sgmii_res_cal: cal value = 0xe No valid address in Flash. Using fixed address No valid address in Flash. Using fixed address ath_gmac_enet_initialize: reset mask:c02200 Scorpion ----> S17 PHY * athrs17_reg_init: complete : cfg1 0x80000000 cfg2 0x7114 eth0: ba:be:fa:ce:08:41 eth0 up athrs17_reg_init_wan done SGMII in forced mode athr_gmac_sgmii_setup SGMII done : cfg1 0x800c0000 cfg2 0x7214 eth1: ba:be:fa:ce:08:41 eth1 up eth0, eth1 Setting 0x18116290 to 0x58b1a14f is_auto_upload_firmware=0 Autobooting in 1 seconds ap135> tftp 0x80060000 openwrt-15.05-ar71xx-generic-tl-wr1043nd-v2-squashfs-factory.bin dup 1 speed 1000 Using eth1 device TFTP from server 192.168.1.100; our IP address is 192.168.1.111 Filename 'openwrt-15.05-ar71xx-generic-tl-wr1043nd-v2-squashfs-factory.bin'. Load address: 0x80060000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################ done Bytes transferred = 8126464 (7c0000 hex) ap135> erase 0x9f020000 +0x7c0000 Erasing flash... First 0x2 last 0x7d sector size 0x10000 125 Erased 124 sectors ap135> cp.b 0x80060000 0x9f020000 0x7c0000 Copy to Flash... write addr: 9f020000 done ap135> boot.m 0x9f020000 ## Booting image at 9f020000 ... Uncompressing Kernel Image ... OK Starting kernel ... [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 21:55:57 CEST 2015 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=TL-WR1043ND-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 61004K/65536K available (2621K kernel code, 129K rwdata, 344K rodata, 224K init, 194K bss, 4532K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz [ 0.000000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048) [ 0.060000] pid_max: default: 32768 minimum: 301 [ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070000] NET: Registered protocol family 16 [ 0.080000] MIPS: machine is TP-LINK TL-WR1043ND v2 [ 0.520000] Switched to clocksource MIPS [ 0.530000] NET: Registered protocol family 2 [ 0.530000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.530000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.540000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.540000] TCP: reno registered [ 0.550000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.550000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.560000] NET: Registered protocol family 1 [ 0.560000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.580000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.580000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.590000] msgmni has been set to 119 [ 0.590000] io scheduler noop registered [ 0.600000] io scheduler deadline registered (default) [ 0.600000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.640000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A [ 0.640000] console [ttyS0] enabled [ 0.640000] console [ttyS0] enabled [ 0.650000] bootconsole [early0] disabled [ 0.650000] bootconsole [early0] disabled [ 0.660000] m25p80 spi0.0: found s25fl064k, expected m25p80 [ 0.670000] m25p80 spi0.0: s25fl064k (8192 Kbytes) [ 0.680000] 5 tp-link partitions found on MTD device spi0.0 [ 0.680000] Creating 5 MTD partitions on "spi0.0": [ 0.690000] 0x000000000000-0x000000020000 : "u-boot" [ 0.690000] 0x000000020000-0x00000012c508 : "kernel" [ 0.700000] 0x00000012c508-0x0000007f0000 : "rootfs" [ 0.700000] mtd: device 2 (rootfs) set to be root filesystem [ 0.720000] 1 squashfs-split partitions found on MTD device rootfs [ 0.720000] 0x000000360000-0x0000007f0000 : "rootfs_data" [ 0.730000] 0x0000007f0000-0x000000800000 : "art" [ 0.730000] 0x000000020000-0x0000007f0000 : "firmware" [ 0.750000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0 [ 0.840000] libphy: ag71xx_mdio: probed [ 1.440000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316] [ 1.450000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 2.040000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII [ 2.040000] TCP: cubic registered [ 2.050000] NET: Registered protocol family 17 [ 2.050000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.060000] Bridge firewalling registered [ 2.070000] 8021q: 802.1Q VLAN Support v1.8 [ 2.080000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 2.090000] Freeing unused kernel memory: 224K (80368000 - 803a0000) [ 3.160000] init: Console is alive [ 3.160000] init: - watchdog - [ 4.370000] usbcore: registered new interface driver usbfs [ 4.370000] usbcore: registered new interface driver hub [ 4.380000] usbcore: registered new device driver usb [ 4.390000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.400000] ehci-platform: EHCI generic platform driver [ 4.400000] ehci-platform ehci-platform.0: EHCI Host Controller [ 4.410000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1 [ 4.420000] ehci-platform ehci-platform.0: TX-TX IDP fix enabled [ 4.420000] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000 [ 4.450000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00 [ 4.450000] hub 1-0:1.0: USB hub found [ 4.460000] hub 1-0:1.0: 1 port detected [ 4.460000] ehci-platform ehci-platform.1: EHCI Host Controller [ 4.470000] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2 [ 4.480000] ehci-platform ehci-platform.1: TX-TX IDP fix enabled [ 4.480000] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000 [ 4.510000] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00 [ 4.510000] hub 2-0:1.0: USB hub found [ 4.520000] hub 2-0:1.0: 1 port detected [ 5.170000] init: - preinit - [ 5.690000] eth1: link up (1000Mbps/Full duplex) [ 5.710000] random: procd urandom read with 9 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 8.960000] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 8.990000] eth1: link down [ 9.000000] procd: - early - [ 9.010000] procd: - watchdog - [ 9.620000] procd: - ubus - [ 10.630000] procd: - init - Please press Enter to activate this console. [ 11.270000] NET: Registered protocol family 10 [ 11.280000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.290000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 11.300000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 11.310000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.320000] nf_conntrack version 0.5.0 (956 buckets, 3824 max) [ 11.350000] xt_time: kernel timezone is -0000 [ 11.370000] cfg80211: Calling CRDA to update world regulatory domain [ 11.390000] cfg80211: World regulatory domain updated: [ 11.390000] cfg80211: DFS Master region: unset [ 11.390000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.400000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.410000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.420000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.430000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.440000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.450000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.450000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.460000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.510000] PPP generic driver version 2.4.2 [ 11.520000] NET: Registered protocol family 24 [ 11.590000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47 [ 11.620000] cfg80211: Calling CRDA for country: US [ 11.620000] cfg80211: Regulatory domain changed to country: US [ 11.630000] cfg80211: DFS Master region: FCC [ 11.630000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.640000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 11.650000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 11.660000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 11.670000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 11.680000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 18.660000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 18.680000] jffs2_build_filesystem(): unlocking the mtd device... done. [ 18.680000] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 20.420000] eth1: link up (1000Mbps/Full duplex) [ 20.420000] device eth1 entered promiscuous mode [ 20.460000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 20.520000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.420000] br-lan: port 1(eth1) entered forwarding state [ 21.420000] br-lan: port 1(eth1) entered forwarding state [ 21.450000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 21.780000] eth0: link up (1000Mbps/Full duplex) [ 21.780000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.420000] br-lan: port 1(eth1) entered forwarding state [ 23.880000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up [ 23.880000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 5 is up [ 40.430000] done. [ 40.430000] jffs2: notice: (1023) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 76.400000] random: nonblocking pool is initialized </file> Last modified: 2015/09/20 13:23by JaHa