TP-Link TL-WR1041ND

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version (18.06 or later) onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device will end after 2019.
19.07 will be the last official build for 4/32 devices. After 19.07, no further OpenWrt images will be built for 4/32 devices. See OpenWrt on 4/32 devices what you can do now.

The TL-WR1041N/ND is a Low-Cost Gigabit Ethernet 2.4Ghz-band dual-stream (2×2) 300mbps wireless router.

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
TL-WR1041NDv2Atheros AR9342525432Atheros AR9342b/g/n--5-1x 2.0

Install -factory.bin as shown above using the “Firmware Upgrade” page of web interface of the original firmware.

  1. Enjoy ;-)
Architecture MIPS
Vendor Qualcomm Atheros
bootloader U-Boot
System-On-Chip Atheros AR9342
CPU/Speed 525 MHz
Flash-Chip cFeon Q32B-104HIP
Flash size 4096 KiB
RAM Winbond W9425G6JH-5
Wireless Atheros AR9340
Ethernet Atheros (integrated)
Switch Atheros AR8327
USB Mod
Serial Yes
JTAG Yes

Main PCB:

Serial/TTL Port:

Blank USB Header:

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2019/02/12 19:01
  • by tmomas