TP-Link TL-WR1041N

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

The TL-WR1041N is a Low-Cost Gigabit Ethernet 2.4GHz-band dual-stream (2×2) 300Mbps wireless router.

Install openwrt-ar71xx-tl-wr1041n-v2-squashfs-factory.bin using the “Firmware Upgrade” page of web interface of the original firmware.

  1. obtain an OpenWrt-Firmware-Image
  2. Enjoy ;-)
Architecture MIPS
Vendor Qualcomm Atheros
bootloader U-Boot
System-On-Chip Atheros AR9342
CPU/Speed 560 MHz
Flash-Chip cFeon Q32B-104HIP
Flash size 4096 KiB
RAM Winbond W9425G6JH-5
Wireless Atheros AR9340
Ethernet Atheros (integrated)
Switch Atheros AR8327
USB Mod
Serial Yes
JTAG Yes

The Board:

Serial/TTL Port:

Blank USB Header:

[ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 21:55:57 CEST 2015 [ 0.000000] MyLoader: sysp=aaaaaaaa, boardp=aaaaaaaa, parts=aaaa8aaa [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) [ 0.000000] SoC: Atheros AR9342 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 8034e2b0, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: board=TL-WR1041N-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00000400 [ 0.000000] Readback ErrCtl register=00000400 [ 0.000000] Memory: 28516K/32768K available (2621K kernel code, 129K rwdata, 344K rodata, 224K init, 194K bss, 4252K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688) [ 0.070000] pid_max: default: 32768 minimum: 301 [ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] NET: Registered protocol family 16 [ 0.090000] MIPS: machine is TP-LINK TL-WR1041N v2 [ 0.320000] Switched to clocksource MIPS [ 0.320000] NET: Registered protocol family 2 [ 0.330000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.330000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.340000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.350000] TCP: reno registered [ 0.350000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.360000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.360000] NET: Registered protocol family 1 [ 0.370000] PCI: CLS 0 bytes, default 32 [ 0.370000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.390000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.390000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.410000] msgmni has been set to 55 [ 0.420000] io scheduler noop registered [ 0.420000] io scheduler deadline registered (default) [ 0.430000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.440000] console [ttyS0] disabled [ 0.460000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A [ 0.470000] console [ttyS0] enabled [ 0.480000] bootconsole [early0] disabled [ 0.490000] m25p80 spi0.0: found mx25l6405d, expected m25p80 [ 0.490000] m25p80 spi0.0: mx25l6405d (8192 Kbytes) [ 0.500000] 5 tp-link partitions found on MTD device spi0.0 [ 0.500000] Creating 5 MTD partitions on "spi0.0": [ 0.510000] 0x000000000000-0x000000020000 : "u-boot" [ 0.510000] 0x000000020000-0x00000012c4ec : "kernel" [ 0.520000] 0x00000012c4ec-0x0000007f0000 : "rootfs" [ 0.530000] mtd: device 2 (rootfs) set to be root filesystem [ 0.530000] 1 squashfs-split partitions found on MTD device rootfs [ 0.540000] 0x000000350000-0x0000007f0000 : "rootfs_data" [ 0.550000] 0x0000007f0000-0x000000800000 : "art" [ 0.550000] 0x000000020000-0x0000007f0000 : "firmware" [ 0.580000] libphy: ag71xx_mdio: probed [ 0.590000] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0 [ 0.650000] libphy: ag71xx_mdio: probed [ 1.250000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316] [ 1.260000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 1.270000] TCP: cubic registered [ 1.270000] NET: Registered protocol family 17 [ 1.270000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.290000] Bridge firewalling registered [ 1.290000] 8021q: 802.1Q VLAN Support v1.8 [ 1.300000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.310000] Freeing unused kernel memory: 224K (80368000 - 803a0000) [ 2.360000] init: Console is alive [ 2.360000] init: - watchdog - [ 4.400000] init: - preinit - [ 5.030000] random: procd urandom read with 7 bits of entropy available [ 6.320000] eth0: link up (1000Mbps/Full duplex) [ 8.280000] jffs2: notice: (381) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 8.300000] mount_root: switching to jffs2 overlay [ 8.320000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up [ 8.350000] eth0: link down [ 8.360000] procd: - early - [ 8.370000] procd: - watchdog - [ 9.090000] procd: - ubus - [ 10.100000] procd: - init - [ 10.950000] NET: Registered protocol family 10 [ 10.960000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.970000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 10.980000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 10.990000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.010000] nf_conntrack version 0.5.0 (449 buckets, 1796 max) [ 11.050000] xt_time: kernel timezone is -0000 [ 11.070000] cfg80211: Calling CRDA to update world regulatory domain [ 11.100000] cfg80211: World regulatory domain updated: [ 11.110000] cfg80211: DFS Master region: unset [ 11.110000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.120000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.130000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.140000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.150000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.150000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.160000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.170000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.180000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.220000] PPP generic driver version 2.4.2 [ 11.230000] NET: Registered protocol family 24 [ 11.310000] ath: EEPROM regdomain: 0x0 [ 11.310000] ath: EEPROM indicates default country code should be used [ 11.310000] ath: doing EEPROM country->regdmn map search [ 11.310000] ath: country maps to regdmn code: 0x3a [ 11.310000] ath: Country alpha2 being used: US [ 11.310000] ath: Regpair used: 0x3a [ 11.320000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.330000] ieee80211 phy0: Atheros AR9340 Rev:1 mem=0xb8100000, irq=47 [ 11.370000] cfg80211: Calling CRDA for country: US [ 11.370000] cfg80211: Regulatory domain changed to country: US [ 11.380000] cfg80211: DFS Master region: FCC [ 11.380000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.390000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 11.400000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 11.410000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 11.420000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 11.430000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 20.130000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.150000] device eth0.1 entered promiscuous mode [ 20.150000] device eth0 entered promiscuous mode [ 20.170000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 20.180000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 21.020000] cfg80211: Calling CRDA for country: HK [ 21.060000] cfg80211: Regulatory domain changed to country: HK [ 21.060000] cfg80211: DFS Master region: unset [ 21.070000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 21.080000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 21.080000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 21.090000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s) [ 21.100000] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s) [ 21.110000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 21.760000] eth0: link up (1000Mbps/Full duplex) [ 21.760000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.770000] br-lan: port 1(eth0.1) entered forwarding state [ 21.780000] br-lan: port 1(eth0.1) entered forwarding state [ 21.780000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 21.810000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 22.900000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.910000] device wlan0 entered promiscuous mode [ 22.920000] br-lan: port 2(wlan0) entered forwarding state [ 22.930000] br-lan: port 2(wlan0) entered forwarding state [ 22.950000] br-lan: port 2(wlan0) entered disabled state [ 23.780000] br-lan: port 1(eth0.1) entered forwarding state [ 24.060000] br-lan: port 2(wlan0) entered forwarding state [ 24.070000] br-lan: port 2(wlan0) entered forwarding state [ 24.070000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 26.070000] br-lan: port 2(wlan0) entered forwarding state [ 48.020000] random: nonblocking pool is initialized


This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1