Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:tp-link:tl-wa801nd [2020/01/21 09:51] – [Installing on v5] removed source build note as 19.07 has pre-built images nalxtoh:tp-link:tl-wa801nd [2024/12/06 11:38] – [Supported Versions] frollic
Line 1: Line 1:
 ====== TP-Link TL-WA801ND ====== ====== TP-Link TL-WA801ND ======
 +
 +==== Special note for versions v1-4 + v6; v5 is supported ====
  
 {{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}} {{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
 ===== Supported Versions ===== ===== Supported Versions =====
----- datatable ---- + 
-cols    BrandModelVersionsSupported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid +Only v5 is still supported. 
-headers BrandModel, Version, Current Release, OEM Info, Forum Topic, Technical Data + 
-align   c,c,c,c,c,c,c,c +<!-- ToH: { 
-filter  : Model=TL-WA801ND +  "source""json", 
-sort    : Version +  "dom": "t", 
-----+  "paging": false
 +  "rotate"true
 +  "shownColumns"["brand""model""version""supportedcurrentrel""oemdevicehomepageurl""owrt_forum_topic_url""deviceid"]
 +  "filterColumns"{"model": "^TL-WA801ND$"} 
 +-->
  
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsCPUCPU MHzFlash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ +  "source""json", 
-header  : ModelVersion,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB +  "dom": "t", 
-align   : c,c,l,c,c,c,c,c,c,c,c,c +  "paging": false, 
-filter  : Model=TL-WA801ND +  "rotate": true
-sort    : Version +  "shownColumns"["model""version""cpu""cpumhz""flashmb""rammb""wlanhardware""wlan24ghz""wlan50ghz""ethernet100mports""ethernet1gports""modem""usbports"]
-----+  "filterColumns"{"model": "^TL-WA801ND$"} 
 +-->
  
  
 ===== Installation ===== ===== Installation =====
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsSupported Current RelFirmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_urlFirmware OEM Stock URL_url +  "source""json", 
-align   l,c,c +  "dom": "t", 
-filter  : Model=TL-WA801ND +  "paging": false, 
-sort    : Version +  "rotate": true
-----+  "shownColumns"["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl""firmwareoemstockurl"]
 +  "filterColumns"{"model": "^TL-WA801ND$"} 
 +-->
  
 ==== Locked Firmware ==== ==== Locked Firmware ====
Line 51: Line 60:
 </code> </code>
  
 +After the reboot sequence, the router may have fallen back to its default IP address : 192.168.0.254, with the default credentials (admin:admin)
 +
 +Rename the downloaded firmware to firmware.bin
 +
 +Log in to the web interface and go the the firmware upload page
 +
 +Select the correct firmware file, and you're done : the system now accepts the openwrt image 8-) 
 ===== Unsorted ===== ===== Unsorted =====
  
Line 85: Line 101:
  
 ==== Installing on v5 ==== ==== Installing on v5 ====
 +
 +{{:media:tplink:tp-link_tl-wa801nd-v5_pcb.jpg?600|TP-Link TL-WA801ND v5 PCB}}
  
 Pre-built images are available starting with release 19.07. Pre-built images are available starting with release 19.07.
Line 91: Line 109:
  
   * rename the bin/.../xxx_recovery.bin to **tp_recovery.bin**   * rename the bin/.../xxx_recovery.bin to **tp_recovery.bin**
-  * put it in your tftp folder (or use put tp_recovery.bin) +  * put it in your tftp folder 
-  * the router expect TFTP at **192.168.0.66** +  * the router expects TFTP at **192.168.0.66** 
-  * power device on with reset button pressed to enter TFTP recovery mode+  * power device on with reset button pressed until the rightmost led is lit (the lock) to enter TFTP recovery mode
  
 Once it's installed, do a normal sysupgrade with the squashfs image you built, also found in bin dir of the sources Once it's installed, do a normal sysupgrade with the squashfs image you built, also found in bin dir of the sources
Line 101: Line 119:
 ==== OEM bootlog ==== ==== OEM bootlog ====
  
-FIXME OEM serial bootlog to be added.+OEM bootlog from tl-wa801nd-v1
  
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>Insert serial bootlog here</nowiki>+<nowiki>U-Boot 1.1.4 (Dec 16 2009 - 17:52:07) 
 + 
 +AP93 (ar7240) U-boot 
 +DRAM:   
 +sri 
 +#### TAP VALUE 1 = 7, 2 = 8 
 +32 MB 
 +id read 0x100000ff 
 +flash size 4194304, sector count = 64 
 +Flash:  4 MB 
 +Using default environment 
 + 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +Net:   ag7240_enet_initialize... 
 +No valid address in Flash. Using fixed address 
 +: cfg1 0xf cfg2 0x7014 
 +eth0: 00:03:7f:09:0b:ad 
 +eth0 up 
 +No valid address in Flash. Using fixed address 
 +: cfg1 0xf cfg2 0x7214 
 +eth1: 00:03:7f:09:0b:ad 
 +ATHRS26: resetting s26 
 +ATHRS26: s26 reset done 
 +eth1 up 
 +eth0, eth1 
 +Autobooting in 1 seconds 
 +## Booting image at 9f020000 ... 
 +   Uncompressing Kernel Image ... OK 
 + 
 +Starting kernel ... 
 + 
 +Booting AR7240(Python)... 
 +Linux version 2.6.15--LSDK-7.3.0.300 gcc version 3.4.4 #1 Mon Feb 14 14:32:06 CST 2011 
 +flash_size passed from bootloader = 4 
 +CPU revision is: 00019374 
 +Determined physical RAM map: 
 + memory: 02000000 @ 00000000 (usable) 
 +User-defined physical RAM map: 
 + memory: 02000000 @ 00000000 (usable) 
 +Built 1 zonelists 
 +Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init mtdparts=ar7100-nor0:128k(u-boot),1024k(kernel),2816k(rootfs),64k(coM 
 +Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes. 
 +Primary data cache 32kB, 4-way, linesize 32 bytes. 
 +Synthesized TLB refill handler (20 instructions). 
 +Synthesized TLB load handler fastpath (32 instructions). 
 +Synthesized TLB store handler fastpath (32 instructions). 
 +Synthesized TLB modify handler fastpath (31 instructions). 
 +Cache parity protection disabled 
 +PID hash table entries: 256 (order: 8, 4096 bytes) 
 +Using 200.000 MHz high precision timer. 
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +Memory: 30548k/32768k available (1368k kernel code, 2204k reserved, 291k data, 128k init, 0k highmem) 
 +Mount-cache hash table entries: 512 
 +Checking for 'wait' instruction...  available. 
 +NET: Registered protocol family 16 
 +Returning IRQ 48 
 +AR7240 GPIOC major 0 
 +squashfs: version 3.3 (2007/10/31) Phillip Lougher 
 +squashfs: LZMA suppport for slax.org by jro 
 +Initializing Cryptographic API 
 +io scheduler noop registered 
 +io scheduler deadline registered 
 +Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled 
 +serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A 
 +RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize 
 +PPP generic driver version 2.4.2 
 +PPPoX init, max protocols:
 +NET: Registered protocol family 24 
 +pppox protocol 0 register. max:3 
 +cmdlinepart partition parsing not available 
 +Searching for RedBoot partition table 
 +5 RedBoot partitions found on MTD device ar7240-nor0 
 +Creating 5 MTD partitions on "ar7240-nor0": 
 +0x00000000-0x00020000 : "boot" 
 +0x00020000-0x00120000 : "kernel" 
 +0x00120000-0x003e0000 : "rootfs" 
 +0x003e0000-0x003f0000 : "config" 
 +0x003f0000-0x00400000 : "art" 
 +->Oops: flash id 0x10215 .  
 +NET: Registered protocol family 2 
 +IP route cache hash table entries: 512 (order: -1, 2048 bytes) 
 +TCP established hash table entries: 2048 (order: 1, 8192 bytes) 
 +TCP bind hash table entries: 2048 (order: 1, 8192 bytes) 
 +TCP: Hash tables configured (established 2048 bind 2048) 
 +TCP reno registered 
 +TCP bic registered 
 +NET: Registered protocol family 1 
 +NET: Registered protocol family 17 
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> 
 +All bugs added by David S. Miller <davem@redhat.com> 
 +VFS: Mounted root (squashfs filesystem) readonly. 
 +Freeing unused kernel memory: 128k freed 
 +init started:  BusyBox v1.01 (2010.04.08-11:57+0000) multi-call binary 
 +Algorithmics/MIPS FPU Emulator v1.5 
 +ip_conntrack version 2.4 (256 buckets, 5120 max) - 244 bytes per conntrack 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_nat.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_MASQUERADE.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_conntrack.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_iprange.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_mac.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_string.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/iptable_nat.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_time.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_TRIGGER.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_conntrack_pptp.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_TCPMSS.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_multiurl.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_conntrack_h323.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_MARK.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_htb.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_prio.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_sfq.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/cls_basic.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/cls_fw.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/ts_kmp.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/flashid.ko': No such file or directory 
 +insmod: cannot open module `/lib/modules/2.6.15/kernel/harmony.ko': No such file or directory 
 +Now flash open! 
 +Now flash open! 
 +sys_mode=3 mac:8106c000 ag7240_macs[0]:00000000 ag7240_macs[1]:8106c000 
 +
 +sys_mode=3 mac:80310000 ag7240_macs[0]:80310000 ag7240_macs[1]:8106c000 
 +
 +sys_mode 3 PHY4 auto-negotiation enable 
 +Attention: PHY4  Class A setting in debug 5 register which is not described in DS 
 +phy_setup ethUnit:0 phyUnit:4 
 +Port 4, Neg Success 
 + 
 + (none) mips #1 Mon Feb 14 14:32:06 CST 2011 (none) 
 +(none) login: ATHRS26: resetting s26 
 +ATHRS26: s26 reset done 
 +sys_mode 3 PHY0 auto-negotiation enable 
 +Attention: PHY 0 Class A setting in debug 5 register which is not described in DS 
 +sys_mode 3 PHY1 auto-negotiation enable 
 +Attention: PHY 1 Class A setting in debug 5 register which is not described in DS 
 +sys_mode 3 PHY2 auto-negotiation enable 
 +Attention: PHY 2 Class A setting in debug 5 register which is not described in DS 
 +sys_mode 3 PHY3 auto-negotiation enable 
 +Attention: PHY 3 Class A setting in debug 5 register which is not described in DS 
 +phy_setup ethUnit:1 phyUnit:0 
 +phy_setup ethUnit:1 phyUnit:1 
 +phy_setup ethUnit:1 phyUnit:2 
 +phy_setup ethUnit:1 phyUnit:3 
 +Port 0, Neg Success 
 +Port 1, Neg Success 
 +Port 2, Neg Success 
 +Port 3, Neg Success 
 +device eth0 entered promiscuous mode 
 +Now flash open! 
 +phy_setup ethUnit:1 phyUnit:0 
 +phy_setup ethUnit:1 phyUnit:1 
 +phy_setup ethUnit:1 phyUnit:2 
 +phy_setup ethUnit:1 phyUnit:3 
 +Port 0, Neg Success 
 +Port 1, Neg Success 
 +Port 2, Neg Success 
 +Port 3, Neg Success 
 +ath_hal: module license 'Proprietary' taints kernel. 
 +ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D) 
 +wlan: 0.8.4.2 (Atheros/multi-bss) 
 +ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved 
 +ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved 
 +++++ phy_up is 1, fdx is 1, speed is 1 
 +AG7240: enet unit:1 phy:0 is up...Mii 100Mbps full duplex 
 +AG7240: enet unit 1 phy 0 mode 0x4c04 
 +ath_pci: 0.9.4.5 (Atheros/multi-bss) 
 +wifi0: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000 
 +br0: port 1(eth0) entering learning state 
 +br0: topology change detected, propagating 
 +br0: port 1(eth0) entering forwarding state 
 +wlan_me: Version 0.1 
 +Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved 
 +wlan: mac acl policy registered 
 + 
 +TP_Flags:6**** 
 +The selected channel is 1 
 +Country ie is US  
 +Country ie is US  
 +maxrate = 300000 
 +Country ie is US  
 +br0: port 1(eth0) entering disabled state 
 +phy_setup ethUnit:1 phyUnit:0 
 +phy_setup ethUnit:1 phyUnit:1 
 +phy_setup ethUnit:1 phyUnit:2 
 +phy_setup ethUnit:1 phyUnit:3 
 +Port 0, Neg Success 
 +Port 1, Neg Success 
 +Port 2, Neg Success 
 +Port 3, Neg Success 
 +device ath0 entered promiscuous mode 
 +br0: port 2(ath0) entering learning state 
 +br0: topology change detected, propagating 
 +br0: port 2(ath0) entering forwarding state 
 +br0: port 2(ath0) entering disabled state 
 +Country ie is US  
 +br0: port 2(ath0) entering learning state 
 +br0: topology change detected, propagating 
 +br0: port 2(ath0) entering forwarding state 
 +phy_up is 1, fdx is 1, speed is 1 
 +AG7240: enet unit:1 phy:0 is up...Mii 100Mbps full duplex 
 +AG7240: enet unit 1 phy 0 mode 0x4c04 
 +br0: port 1(eth0) entering learning state 
 +br0: topology change detected, propagating 
 +br0: port 1(eth0) entering forwarding state 
 +br0: port 2(ath0) entering disabled state 
 +Country ie is US  
 +br0: port 2(ath0) entering learning state 
 +br0: topology change detected, propagating 
 +br0: port 2(ath0) entering forwarding state 
 + 
 +OPERMODE:0**** 
 +Inteference detected 
 +rx_clear=99, rx_frame=0, tx_frame=0 
 +ath_bstuck_tasklet... Calling ath_internal reset  
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/12/06 11:42
  • by frollic