| Both sides previous revision Previous revision | |
| toh:tp-link:tl-wa1201_v2_old [2022/04/17 10:00] – [Serial] transfered to new devicpeage tmomas | toh:tp-link:tl-wa1201_v2_old [2022/04/17 10:08] (current) – Transfered to new devciepage tmomas |
|---|
| ====== TP-Link TL-WA1201 v2====== | |
| ~~NOTOC~~ | |
| |
| /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page . */ | |
| |
| |
| {{ media:tplink:tl-wa1201v2.jpg?400|TL-WA1201 V2}} | |
| |
| /*****/ | |
| /* How to add images ========> https://openwrt.org/meta/adding_images_to_openwrt_wiki */ | |
| /*****/ | |
| |
| |
| |
| |
| ===== OpenWrt support ===== | |
| |
| Supported | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ===== Supporting activities ===== | |
| //Describe if there are any ongoing activities that might lead to OpenWrt support.// | |
| |
| * OpenWrt forum thread: (add link) | |
| ***/ | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ===== Experimental firmware ===== | |
| |
| //List experimental firmware download links here.// | |
| |
| //None at this time.// | |
| |
| * External image (add link) | |
| * trunk image (add link) | |
| * ... | |
| ***/ | |
| |
| |
| ===== Hardware highlights ===== | |
| ^ CPU ^ Ram ^ Flash ^ Network ^ WLAN ^ USB ^ Serial ^ JTag ^ | |
| | QCA9563 @ 775 MHz | 512 MiB | 16 MiB | 1x 10/100/1000 | b/g/n and a/n/ac | No | Yes | No | | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ===== Installation ===== | |
| - → [[:downloads|Obtain firmware]] | |
| - → [[docs:guide-user:installation:generic.flashing|Install OpenWrt]] | |
| - → [[:downloads|Latest OpenWrt release]] | |
| |
| ==== Installing OpenWrt ==== | |
| ***/ | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ===== Debricking ===== | |
| -> [[docs:guide-user:troubleshooting:generic.debrick]] | |
| ***/ | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ===== Failsafe mode ===== | |
| -> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] | |
| ***/ | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ===== Basic configuration ===== | |
| After flashing, proceed with [[docs:guide-user:base-system:start|Basic configuration]]: Set up your Internet connection, configure wireless, configure USB port, etc. | |
| ***/ | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ===== Specific configuration ===== | |
| |
| <WRAP BOX 600px> | |
| FIXME Please fill in real values for this device, then remove the EXAMPLEs and the WRAP that encloses this text. | |
| |
| ==== Network interfaces ==== | |
| The default network configuration is: | |
| ^ Interface Name ^ Description ^ Default configuration ^ | |
| | br-lan | EXAMPLE LAN & WiFi | EXAMPLE 192.168.1.1/24 | | |
| | vlan0 (eth0.0) | EXAMPLE LAN ports (1 to 4) | EXAMPLE None | | |
| | vlan1 (eth0.1) | EXAMPLE WAN port | EXAMPLE DHCP | | |
| | wl0 | EXAMPLE WiFi | EXAMPLE Disabled | | |
| </WRAP> | |
| ***/ | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ==== Buttons ==== | |
| -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). | |
| Here, we merely name the buttons, so we can use them in the above Howto. | |
| |
| <WRAP BOX 600px> | |
| FIXME Please fill in real values for this device, then remove the EXAMPLEs and the WRAP that encloses this text. | |
| |
| The TP-Link TL-WA1201 has the following buttons: | |
| |
| ^ BUTTON ^ Event ^ | |
| | EXAMPLE Reset | reset | | |
| | EXAMPLE Secure Easy Setup | ses | | |
| | EXAMPLE No buttons at all. | - | | |
| </WRAP> | |
| ***/ | |
| |
| |
| ===== Hardware ===== | |
| ==== Info ==== | |
| ^ Architecture | MIPS | | |
| ^ Vendor | Qualcomm | | |
| ^ Bootloader | U-Boot | | |
| ^ System-On-Chip | Qualcomm Atheros QCA9563 - MIPS 74Kc V5.0 | | |
| ^ CPU/Speed | 775 MHz | | |
| ^ Flash-Chip | unkown | | |
| ^ Flash size | 16 MiB | | |
| ^ RAM | 512 MiB | | |
| ^ Wireless | Qualcomm Atheros QCA9563 2.4GHz 802.11bgn | | |
| ^ Ethernet | Qualcomm Atheros AR8033 10/100/1000 Mbit/s | | |
| ^ Switch | - | | |
| ^ USB | - | | |
| ^ Serial | [[#Serial|Yes]] | | |
| ^ JTAG | - | | |
| |
| |
| /*** if info available: uncomment and fill in | |
| ==== Flash Layout ==== | |
| <WRAP BOX> | |
| FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_squashfs-images|example]]).// | |
| |
| Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. | |
| </WRAP> | |
| ***/ | |
| |
| |
| ==== Photos ==== | |
| /* =====>>>>> Standard size for photos: add ?400 to the medialink */ | |
| /* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ | |
| /* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}} */ | |
| /* Thanks, your wiki administration - Oct. 2015 */ | |
| |
| **Insert photo of front of the casing** | |
| |
| **Insert photo of back of the casing** | |
| |
| **Insert photo of backside label** | |
| |
| **Insert photo of PCB** | |
| |
| ==== Opening the case ==== | |
| |
| <WRAP BOX> | |
| Remove two screws at the bottom of the device. | |
| </WRAP> | |
| |
| |
| |
| ==== JTAG ==== | |
| No JTAG available. | |
| ===== Bootlogs ===== | |
| ==== OEM bootlog ==== | |
| <WRAP bootlog> | |
| <nowiki> | |
| U-Boot 1.1.4-g2613920e-dirty (Jul 9 2020 - 16:54:18) | |
| |
| ap152 - Dragonfly 1.0 | |
| |
| DRAM: 128 MB | |
| Top of RAM usable for U-Boot at: 88000000 | |
| Reserving 381k for U-Boot at: 87fa0000 | |
| Reserving 192k for malloc() at: 87f70000 | |
| Reserving 44 Bytes for Board Info at: 87f6ffd4 | |
| Reserving 36 Bytes for Global Data at: 87f6ffb0 | |
| Reserving 128k for boot params() at: 87f4ffb0 | |
| Stack Pointer at: 87f4ff98 | |
| Now running in RAM - U-Boot at: 87fa0000 | |
| Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18 | |
| flash size 16MB, sector count = 256 | |
| Flash: 16 MB | |
| Using default environment | |
| |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Net: ath_gmac_enet_initialize... | |
| No valid address in Flash. Using fixed address | |
| ath_gmac_enet_initialize: reset mask:c02200 | |
| athr_mgmt_init ::done | |
| Dragonfly ----> S17 PHY * | |
| phy_hw_cfg 10. | |
| Max resets limit reached exiting... | |
| athr_gmac_sgmii_setup SGMII done | |
| : cfg1 0x80000000 cfg2 0x7114 | |
| eth0: 00:03:7f:09:0b:ad | |
| eth0 up | |
| eth0 | |
| Setting 0x181162c0 to 0x40802100 | |
| Hit any key to stop autoboot: 0 | |
| ## Booting image at 9f030000 ... | |
| Image Name: MIPS OpenWrt Linux-3.3.8 | |
| Created: 2020-07-09 10:03:54 UTC | |
| Image Type: MIPS Linux Multi-File Image (lzma compressed) | |
| Data Size: 1045963 Bytes = 1021.4 kB | |
| Load Address: 80060000 | |
| Entry Point: 80060000 | |
| Contents: | |
| Image 0: 1045955 Bytes = 1021.4 kB | |
| Verifying Checksum at 0x9f030040 ...OK | |
| Uncompressing Multi-File Image ... OK | |
| No initrd | |
| ## Transferring control to Linux (at address 80060000) ... | |
| ## Giving linux memsize in bytes, 134217728 | |
| |
| Starting kernel ... | |
| |
| [ 0.000000] Linux version 3.3.8 (tplink@whattestfortplink) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-0 | |
| [ 0.000000] bootconsole [early0] enabled | |
| [ 0.000000] CPU revision is: 00019750 (MIPS 74Kc) | |
| [ 0.000000] SoC: Qualcomm Atheros QCA956X rev 0 | |
| [ 0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz | |
| [ 0.000000] Determined physical RAM map: | |
| [ 0.000000] memory: 08000000 @ 00000000 (usable) | |
| [ 0.000000] User-defined physical RAM map: | |
| [ 0.000000] memory: 08000000 @ 00000000 (usable) | |
| [ 0.000000] Initrd not found or empty - disabling initrd | |
| [ 0.000000] Zone PFN ranges: | |
| [ 0.000000] Normal 0x00000000 -> 0x00008000 | |
| [ 0.000000] Movable zone start PFN for each node | |
| [ 0.000000] Early memory PFN ranges | |
| [ 0.000000] 0: 0x00000000 -> 0x00008000 | |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 | |
| [ 0.000000] Kernel command line: console=ttyS0,115200 board=AP152 rootfstype=squashfs init=/etc/preinit mtdparts=spc | |
| [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) | |
| [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
| [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. | |
| [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
| [ 0.000000] Writing ErrCtl register=00000000 | |
| [ 0.000000] Readback ErrCtl register=00000000 | |
| [ 0.000000] Memory: 126352k/131072k available (2234k kernel code, 4720k reserved, 547k data, 180k init, 0k highmem) | |
| [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| [ 0.000000] NR_IRQS:83 | |
| [ 0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) | |
| [ 0.060000] pid_max: default: 32768 minimum: 301 | |
| [ 0.060000] Mount-cache hash table entries: 512 | |
| [ 0.070000] NET: Registered protocol family 16 | |
| [ 0.070000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79 | |
| [ 0.080000] MIPS: machine is TP-LINK TL-WA1201 v2 support | |
| [ 0.590000] Max resets limit reached exiting... | |
| [ 0.600000] | |
| [ 0.600000] WLAN firmware dump buffer allocation of 2097152 bytes @ address 0x87a00000- SUCCESS !!! | |
| [ 0.610000] registering PCI controller with io_map_base unset | |
| [ 0.820000] bio: create slab <bio-0> at 0 | |
| [ 0.820000] PCI host bridge to bus 0000:00 | |
| [ 0.820000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] | |
| [ 0.830000] pci_bus 0000:00: root bus resource [io 0x0001] | |
| [ 0.830000] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] | |
| [ 0.840000] pci 0000:00:00.0: using irq 40 for pin 1 | |
| [ 0.840000] Switching to clocksource MIPS | |
| [ 0.850000] NET: Registered protocol family 2 | |
| [ 0.850000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.850000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.860000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.860000] TCP: Hash tables configured (established 4096 bind 4096) | |
| [ 0.870000] TCP reno registered | |
| [ 0.870000] UDP hash table entries: 256 (order: 0, 4096 bytes) | |
| [ 0.880000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
| [ 0.880000] NET: Registered protocol family 1 | |
| [ 0.900000] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.900000] msgmni has been set to 246 | |
| [ 0.910000] io scheduler noop registered | |
| [ 0.910000] io scheduler deadline registered (default) | |
| [ 0.920000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled | |
| [ 0.940000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A | |
| [ 0.950000] console [ttyS0] enabled, bootconsole disabled | |
| [ 0.950000] console [ttyS0] enabled, bootconsole disabled | |
| [ 0.960000] m25p80 spi0.0: found w25q128, expected m25p80 | |
| [ 0.970000] m25p80 spi0.0: w25q128 (16384 Kbytes) | |
| [ 0.970000] 4 cmdlinepart partitions found on MTD device spi0.0 | |
| [ 0.980000] Creating 4 MTD partitions on "spi0.0": | |
| [ 0.980000] 0x000000000000-0x000000030000 : "u-boot" | |
| [ 0.990000] 0x000000030000-0x000000150000 : "uImage" | |
| [ 1.000000] 0x000000150000-0x000000fe0000 : "rootfs" | |
| [ 1.000000] mtd: partition "rootfs" set to be root filesystem | |
| [ 1.010000] 0x000000ff0000-0x000001000000 : "ART" | |
| [ 1.010000] m25p80 spi0.1: found pm25lv512, expected m25p80 | |
| [ 1.020000] m25p80 spi0.1: pm25lv512 (64 Kbytes) | |
| [ 1.030000] flash_chrdev : flash_chrdev_init | |
| [ 1.040000] ag71xx_mdio: probed | |
| [ 1.040000] eth0: Atheros AG71xx at 0xb9000000, irq 4 | |
| [ 1.600000] TCP cubic registered | |
| [ 1.600000] NET: Registered protocol family 17 | |
| [ 1.610000] Bridge firewalling registered | |
| [ 1.610000] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 1.610000] ### of_selftest(): No testcase data in device tree; not running tests | |
| [ 1.630000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. | |
| [ 1.630000] Freeing unused kernel memory: 180k freed | |
| [ 3.160000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Qualcomm Atheros AR803] | |
| - preinit - | |
| - regular preinit - | |
| jffs2 not ready yet; using ramdisk | |
| Support to copy caldata is not there for unknown | |
| - init - | |
| [ 3.630000] in ag71xx_stop | |
| [ 4.240000] liblog: module license 'unspecified' taints kernel. | |
| [ 4.250000] Disabling lock debugging due to kernel taint | |
| [ 4.470000] NET: Registered protocol family 10 | |
| [ 4.670000] Button Hotplug driver version 0.4.1 | |
| [ 4.740000] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) | |
| [ 4.800000] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 4.920000] nf_conntrack version 0.5.0 (1977 buckets, 7908 max) | |
| [ 5.030000] Netfilter messages via NETLINK v0.30. | |
| [ 5.050000] ctnetlink v0.93: registering with nfnetlink. | |
| [ 5.270000] qca_ssdk: Unknown symbol napt_ct_process_inet_event (err 0) | |
| [ 5.300000] AR71XX_RESET_REG_WDOG_CTRL: 0x0 | |
| [ 5.300000] reload_profile() begin: | |
| reload_profile() end: | |
| reloadconfig() begin: | |
| user-config size OK:6519 | |
| 1.untar result is : 0 | |
| ................................start of merge user and default........................ | |
| ................................parse userconf to get mode............................. | |
| ................................end of parse userconf.................................. | |
| ................................mode : ap............................... | |
| ................................end of merge user and default.......................... | |
| ................................new configs merged..................................... | |
| reloadconfig() end | |
| ########merge_mfconfig() start######## | |
| ########merge_mfconfig() end######## | |
| |
| Please press Enter to activate this console. | |
| [ 9.050000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Qualcomm Atheros AR803] | |
| [ 9.060000] ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [ 9.080000] in ag71xx_stop | |
| [ 9.080000] del ct event: 2 dev_name: eth0 | |
| [ 9.080000] start clean up ct iterate.. | |
| [ 9.410000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Qualcomm Atheros AR803] | |
| [ 9.420000] ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| GMT+00:00 | |
| Thu Jul 9 00:00:00 GMT 2020 | |
| [SWITCH DEBUG] Clear Port(0) PVID | |
| [SWITCH DEBUG] Clear Port(1) PVID | |
| [SWITCH DEBUG] Clear Port(2) PVID | |
| [SWITCH DEBUG] Clear Port(3) PVID | |
| [SWITCH DEBUG] Clear Port(4) PVID | |
| [SWITCH DEBUG] Clear Port(5) PVID | |
| [SWITCH DEBUG] Flush vlan entries. | |
| [SWITCH DEBUG] Create VLAN VID=1 | |
| [SWITCH DEBUG] Add tagged port(0) to VLAN(1) | |
| [SWITCH DEBUG] Add untagged port(2) to VLAN(1) | |
| [SWITCH DEBUG] Add untagged port(3) to VLAN(1) | |
| [SWITCH DEBUG] Add untagged port(4) to VLAN(1) | |
| [SWITCH DEBUG] Add untagged port(5) to VLAN(1) | |
| [SWITCH DEBUG] Set Port(0) PVID(1) | |
| [SWITCH DEBUG] Set Port(0) ingress to secure | |
| [SWITCH DEBUG] Set Port(2) PVID(1) | |
| [SWITCH DEBUG] Set Port(2) ingress to secure | |
| [SWITCH DEBUG] Set Port(3) PVID(1) | |
| [SWITCH DEBUG] Set Port(3) ingress to secure | |
| [SWITCH DEBUG] Set Port(4) PVID(1) | |
| [SWITCH DEBUG] Set Port(4) ingress to secure | |
| [SWITCH DEBUG] Set Port(5) PVID(1) | |
| [SWITCH DEBUG] Set Port(5) ingress to secure | |
| [SWITCH DEBUG] Create VLAN VID=4094 | |
| [SWITCH DEBUG] Add tagged port(0) to VLAN(4094) | |
| [SWITCH DEBUG] Add untagged port(1) to VLAN(4094) | |
| [SWITCH DEBUG] Set Port(0) PVID(4094) | |
| [SWITCH DEBUG] Set Port(0) ingress to secure | |
| [SWITCH DEBUG] Set Port(1) PVID(4094) | |
| [SWITCH DEBUG] Set Port(1) ingress to secure | |
| [SWITCH DEBUG] Set Port(0) PVID(0) | |
| Failed to connect to the switch | |
| Failed to connect to the switch | |
| Failed to connect to the switch | |
| Failed to connect to the switch | |
| Failed to connect to the switch | |
| /usr/bin/lua: /sbin/ifmac:24: bad argument #1 to 'find' (string expected, got nil) | |
| stack traceback: | |
| [C]: in function 'find' | |
| /sbin/ifmac:24: in function 'dev_set_mac' | |
| /sbin/ifmac:60: in function 'iface_set_mac' | |
| /sbin/ifmac:64: in function 'main' | |
| /sbin/ifmac:67: in main chunk | |
| [C]: ? | |
| uci: Entry not found | |
| uci: Entry not found | |
| uci: Entry not found | |
| [ 11.250000] ADDRCONF(NETDEV_UP): lo: link is not ready | |
| [ 11.260000] ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [ 11.260000] ADDRCONF(NETDEV_UP): bond0: link is not ready | |
| [ 11.310000] @@@@@@ add br-lan!!! | |
| [ 11.320000] device eth0 entered promiscuous mode | |
| [ 11.320000] ADDRCONF(NETDEV_UP): br-lan: link is not ready | |
| [ 11.350000] [ changeLanIp ] 1692: changeLanIp to 0xc0a800fe | |
| [ 11.350000] | |
| [ 11.410000] eth0: link up (1000Mbps/Full duplex) | |
| [ 11.410000] br-lan: port 1(eth0) entered forwarding state | |
| [ 11.420000] br-lan: port 1(eth0) entered forwarding state | |
| [ 11.420000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [ 11.450000] ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready | |
| loading administration management | |
| loading with https | |
| /etc/rc.common: line 1: fw: not found | |
| fw unload_local_mgnt | |
| /etc/rc.common: line 1: fw: not found | |
| hotplug ifup lan, then restart wifidog | |
| [ 18.060000] tp_domain: ap mode | |
| [ 18.070000] Lan Domain: tplinklogin.net | |
| [ 18.080000] Lan Domain: www.tplinklogin.net | |
| start_instance() main | |
| generate key: 1825 1024 | |
| [ 19.090000] ath_dfs: Version 2.0.0 | |
| [ 19.090000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved | |
| [ 19.390000] ath_spectral: Version 2.0.0 | |
| [ 19.390000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved | |
| |
| [ 22.660000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D) | |
| [ 22.730000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved | |
| [ 22.800000] ath_tx99: Version 2.0 | |
| [ 22.800000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved | |
| [ 23.090000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved | |
| [ 23.330000] JET_PRINT: init_ath_wmac[240]: Checking devid: 3f | |
| [ 23.340000] __ath_attach: Set global_scn[0] | |
| [ 23.340000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** | |
| [ 23.350000] ACBKMinfree = 48 | |
| [ 23.360000] ACBEMinfree = 32 | |
| [ 23.360000] ACVIMinfree = 16 | |
| [ 23.360000] ACVOMinfree = 0 | |
| [ 23.370000] CABMinfree = 48 | |
| [ 23.370000] UAPSDMinfree = 0 | |
| [ 23.370000] ATH_TXBUF=2700 | |
| [ 23.380000] Enterprise mode: 0x03bda000 | |
| [ 23.390000] Restoring Cal data from FS | |
| [ 23.390000] qdf_fs_read[66], Open File /tmp/wifi0.caldata SUCCESS!!file system magic:16914836super blocksize:4096ino8 | |
| [ 23.410000] ART Version : -48.0.0 | |
| [ 23.410000] SW Image Version : -48.0.0.0.0 | |
| [ 23.420000] Board Revision : | |
| [ 23.420000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125 | |
| [ 23.430000] HAL_CAP_TXDESCLEN : 128 | |
| [ 23.430000] HAL_CAP_TXSTATUSLEN : 36 | |
| [ 23.440000] HAL_CAP_RXSTATUSLEN : 48 | |
| [ 23.440000] SPECTRAL : get_capability not registered | |
| [ 23.450000] HAL_CAP_PHYDIAG : Capable | |
| [ 23.450000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 242) | |
| [ 23.460000] SPECTRAL : get_capability not registered | |
| [ 23.460000] HAL_CAP_RADAR : Capable | |
| [ 23.470000] SPECTRAL : Need to fix the capablity check for SPECTRAL | |
| [ 23.470000] (spectral_attach : 247) | |
| [ 23.480000] SPECTRAL : get_capability not registered | |
| [ 23.480000] HAL_CAP_SPECTRAL_SCAN : Capable | |
| [ 23.490000] SPECTRAL : get_tsf64 not registered | |
| [ 23.490000] spectral_init_netlink 85 NULL SKB | |
| [ 23.500000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT | |
| [ 23.500000] SPECTRAL :----- module attached | |
| [ 23.510000] Green-AP : Green-AP : Attached | |
| [ 23.510000] | |
| [ 23.520000] Starting random number generator thread | |
| [ 23.540000] ath_get_caps[6217] rx chainmask mismatch actual 3 sc_chainmak 0 | |
| [ 23.540000] ath_get_caps[6180] tx chainmask mismatch actual 3 sc_chainmak 0 | |
| [ 23.550000] ieee80211_cbs_init CBS Inited | |
| [ 23.560000] band steering initialized for direct attach hardware | |
| [ 23.570000] ieee80211_bsteering_attach: Band steering initialized | |
| [ 23.570000] acfg_attach: 2979: Netlink socket created:87018c00 | |
| [ 23.580000] ath_attach_dfs[12727] dfsdomain 1 | |
| [ 23.590000] dfs_attach: event log enabled by default | |
| [ 23.600000] SPECTRAL : module already attached | |
| [ 23.600000] ath_attach: Set global_ic[1]..gloabl_ic ptr:86357d10 | |
| [ 23.610000] osif_wrap_attach:444 osif wrap attached | |
| [ 23.610000] osif_wrap_devt_init:405 osif wrap dev table init done | |
| [ 23.620000] Wrap Attached: Wrap_com =8713ba00 ic->ic_wrap_com=8713ba00 &wrap_com->wc_devt=8713ba00 | |
| [ 23.640000] ath_tx_paprd_init sc 87378000 PAPRD disabled in HAL | |
| [ 23.650000] ath_thermal_mitigation_attach: TT not supported | |
| [ 23.650000] wifi0: Atheros 956X: mem_start: =0xb8100000, mem_end: =0xb8120000, irq=47 | |
| [ 23.660000] ath_da_pci: (Atheros/multi-bss) | |
| phyport start ....... | |
| [LEO]uhttpd start | |
| [ 24.610000] ath_ol_pci: (Atheros/multi-bss) | |
| [ 24.610000] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x56 | |
| [ 24.620000] ath_ol_pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] | |
| [ 24.630000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) | |
| [ 24.630000] hif_pci_enable_bus: hif_enable_pci done *********** QCA9888 *************hif_pci_enable_bus: hif_type = E | |
| [ 24.680000] chip_id 0xc chip_revision 0x0 | |
| [ 24.680000] | |
| [ 24.680000] CLOCK PLL skipped | |
| [ 24.690000] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff | |
| [ 24.690000] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL | |
| [ 24.710000] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_config4 | |
| [ 24.730000] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON | |
| [ 24.740000] __ol_ath_attach() Allocated scn 85f00380 | |
| [ 24.750000] __ol_ath_attach: dev name wifi1 | |
| [ 24.750000] ol_ath_attach interface_id 1 | |
| [ 24.760000] ol_target_init() BMI inited. | |
| [ 24.770000] ol_target_init() BMI Get Target Info. | |
| [ 24.770000] Chip id: 0xc, chip version: 0x1000000 | |
| [ 24.780000] | |
| [ 24.780000] CE WAR Disabled | |
| [ 24.800000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 | |
| [ 24.830000] ol_target_init() configure Target . | |
| [ 24.850000] | |
| [ 24.850000] Target Version is 1000000 | |
| [ 24.860000] | |
| [ 24.860000] Flash Download Address c0000 | |
| [ 24.860000] ol_transfer_bin_file: flash data file defined | |
| [ 24.870000] ol_transfer_bin_file[3824] Get Caldata for wifi1. | |
| [ 24.880000] qdf_fs_read[66], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:16914836super blocksize:4096ino5 | |
| [ 24.910000] ol_transfer_bin_file 3884: Download Flash data len 12064 | |
| [ 24.930000] Board extended Data download address: 0x0 | |
| [ 25.020000] | |
| [ 25.020000] Board data initialized | |
| [ 25.020000] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 | |
| [ 25.030000] | |
| [ 25.030000] Selecting OTP binary for CHIP Version 0 | |
| SETUP port (1) duplex: 1000 full autoneg: on! | |
| [ 25.120000] ol_transfer_bin_file 3706: downloading file 0, Download data len 9116 | |
| [ 25.170000] | |
| [ 25.170000] First OTP send param 8000 | |
| [ 25.410000] ol_ath_download_firmware :First OTP download and Execute is good address:0x5000 return param 4660 | |
| [ 25.420000] ol_ath_download_firmware:##Board Id 20 , CHIP Id 0 | |
| [ 25.430000] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 | |
| [ 25.440000] Warning : No board id matched. Selecting default boarddata file | |
| [ 25.440000] | |
| [ 25.440000] wifi1: Selecting board data file name boarddata_0.bin | |
| [ 25.450000] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9888/hw.2/boarddata_0.bin | |
| [ 25.480000] ol_transfer_bin_file 3706: downloading file 3, Download data len 12064 | |
| [ 25.490000] Board extended Data download address: 0x0 | |
| [ 25.510000] ol_ath_download_firmware: Using 0x1234 for the remainder of init | |
| [ 25.520000] | |
| [ 25.520000] Selecting OTP binary for CHIP Version 0 | |
| [ 25.540000] br-lan: port 1(eth0) entered disabled state | |
| [ 25.550000] ol_transfer_bin_file 3706: downloading file 0, Download data len 9116 | |
| [ 25.600000] | |
| [ 25.600000] [Flash] : Ignore Module param | |
| [ 25.600000] | |
| [ 25.600000] Second otp download Param 10000 | |
| [ 25.640000] eth0: link down | |
| [ 25.860000] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 | |
| [ 25.870000] | |
| [ 25.870000] Mission mode: Firmware CHIP Version 0 | |
| [ 26.070000] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=524288 | |
| [ 26.200000] ol_swap_wlan_memory_expansion: length:272731 size_left:272751 dma_size_left:524288 fw_temp:c081b004 fw_e5 | |
| [ 26.210000] ol_swap_wlan_memory_expansion: dma_virt_addr :a5e80000 fw_temp: c081b008 length: 272731 | |
| [ 26.230000] Swap: bytes_left to copy: fw:16; dma_page:251557 | |
| [ 26.230000] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:251557 fw_temp:c085d967 fw_entry_size5 | |
| [ 26.240000] Swap: wrong length read:0 | |
| [ 26.250000] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 272731 Target address 41b0b8 | |
| [ 26.260000] scn=85f00380 target_write_addr=41b0b8 seg_info=85f89510 | |
| [ 26.260000] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 | |
| [ 26.270000] bin_filename=QCA9888/hw.2/athwlan.bin swap_filename=/lib/firmware/QCA9888/hw.2/athwlan.codeswap.bin | |
| [ 26.280000] ol_transfer_bin_file: Downloading firmware file: QCA9888/hw.2/athwlan.bin | |
| [ 26.800000] ol_transfer_bin_file 3706: downloading file 1, Download data len 393512 | |
| [ 28.440000] ol_target_init() Download FW done. | |
| [ 28.450000] ol_ath_attach() WMI attached. wmi_handle 85f40000 | |
| [ 28.450000] wmi_unified_register_event_handler: Event id 62 is unavailable | |
| [ 28.460000] +htc_create .. HIF :85924000-htc_create: (0x8722a000) | |
| [ 28.470000] htc_wmi_init() HT Create . 8722a000 | |
| [ 28.470000] htc_wmi_init 8276 host_enable 0 nss_nwifi_offload 0 | |
| [ 28.480000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) | |
| [ 28.490000] OL_ACBKMinfree : 0 | |
| [ 28.490000] OL_ACBEMinfree : 0 | |
| [ 28.490000] OL_ACVIMinfree : 0 | |
| [ 28.500000] OL_ACVOMinfree : 0 | |
| [ 28.500000] hif_enable_fastpath, Enabling fastpath mode | |
| [ 28.500000] +HWT | |
| [ 28.510000] hif_completion_thread_startup: pipe_num:0 pipe_info:0x8592706chif_completion_thread_startup: pipe_num:3 c | |
| [ 28.530000] -HWT | |
| [ 28.530000] Startup Mode-0 set | |
| [ 28.530000] | |
| [ 28.530000] <=== cfg max peer id 1056 ====> | |
| [ 28.540000] htt_peer_map_timer_init Enter pdev 85ae8000 hrtimer 85aec970 | |
| [ 28.550000] | |
| [ 28.550000] htt_alloc_peer_map_mem : Alloc Success : host q vaddr 85af2000 paddr 5af2000 | |
| [ 28.560000] | |
| [ 28.560000] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts | |
| [ 28.570000] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from 85380000 | |
| [ 28.580000] Firmware_Build_Number:139 | |
| [ 28.590000] host/RAM_fw Build Ver Mismatch: H:0x8C, F:0x8B ! | |
| [ 28.590000] FW wireless modes: 0x1f9001 | |
| [ 28.600000] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339979b2 vht_supp_mcs:0x0000fffa | |
| [ 28.610000] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0 | |
| [ 28.610000] | |
| [ 28.610000] Sending Ext resource cfg: HOST PLATFORM as 1 | |
| [ 28.610000] fw_feature_bitmap as 50 to TGT | |
| [ 28.630000] ol_ath_service_ready_event: tt_support: 1 | |
| [ 28.630000] ol_ath_service_ready_event: periodic_chan_stats: 1 | |
| [ 28.640000] ol_ath_service_ready_event: sw_cal_support_check_flag: 1 | |
| [ 28.640000] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17 | |
| [ 28.650000] EXT NSS Supported | |
| [ 28.660000] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 | |
| [ 28.660000] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, | |
| [ 28.670000] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 | |
| [ 28.680000] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, | |
| [ 28.690000] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 | |
| [ 28.700000] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, | |
| [ 28.710000] idx 0 req 1 num_units 0 num_unit_info 2 unit size 880 actual units 531 | |
| [ 28.720000] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 880, | |
| [ 28.720000] idx 4 req 5 num_units 0 num_unit_info 2 unit size 2076 actual units 531 | |
| [ 28.740000] ol_ath_alloc_host_mem_chunk req_id 5 idx 4 num_units 531 unit_len 2076, | |
| [ 28.750000] Support not added yet for Service 91 | |
| [ 28.750000] Support not added yet for Service 92 | |
| [ 28.750000] No EXT_MSG send INIT now | |
| [ 28.760000] chunk 0 len 13568 requested , ptr 0x5378000 | |
| [ 28.760000] chunk 1 len 54272 requested , ptr 0x53e0000 | |
| [ 28.770000] chunk 2 len 217088 requested , ptr 0x4c00000 | |
| [ 28.770000] chunk 3 len 467280 requested , ptr 0x4c80000 | |
| [ 28.780000] chunk 4 len 1102356 requested , ptr 0x4e00000 | |
| [ 28.790000] chunk 5 len 0 requested , ptr 0xffffffff | |
| [ 28.790000] ol_ath_service_ready_event[4275] WAPI MBSSID 2 | |
| [ 28.800000] smart_log_init: Smart logging Enabled buf=pK-error (size=65536) | |
| [ 28.820000] Version = 16777216 3 status = 0 | |
| [ 28.820000] ol_ath_connect_htc() WMI is ready | |
| [ 28.830000] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1 | |
| [ 28.840000] target uses HTT version 2.2; host uses 2.2 | |
| [ 28.850000] ol_ath_attach() connect HTC. | |
| [ 28.850000] bypasswmi : 0 | |
| [ 28.850000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, exten. | |
| [ 28.870000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 | |
| [ 28.870000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 | |
| [ 28.880000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 | |
| [ 28.890000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 | |
| [ 28.890000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 | |
| [ 28.900000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 | |
| [ 28.910000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 | |
| [ 28.920000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 | |
| [ 28.920000] Add VHT80 channel: 5210 | |
| [ 28.930000] Add VHT80 channel: 5290 | |
| [ 28.930000] Add VHT80 channel: 5530 | |
| [ 28.940000] Add VHT80 channel: 5610 | |
| [ 28.940000] Add VHT80 channel: 5690 | |
| [ 28.940000] Add VHT80 channel: 5775 | |
| [ 28.950000] Skipping VHT80 channel 5825 | |
| [ 28.950000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 | |
| [ 28.960000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 | |
| [ 28.970000] freq=58 | |
| [ 28.970000] freq=106 | |
| [ 28.970000] freq=122 | |
| [ 28.970000] OL Resmgr Init-ed | |
| [ 28.980000] ieee80211_cbs_init CBS Inited | |
| [ 28.980000] ieee80211_bsteering_attach: Band steering initialized | |
| [ 28.990000] acfg_attach: using existing sock 87018c00 | |
| [ 28.990000] SPECTRAL : get_capability not registered | |
| [ 29.000000] HAL_CAP_PHYDIAG : Capable | |
| [ 29.000000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 242) | |
| [ 29.010000] SPECTRAL : get_capability not registered | |
| [ 29.020000] HAL_CAP_RADAR : Capable | |
| [ 29.020000] SPECTRAL : Need to fix the capablity check for SPECTRAL | |
| [ 29.020000] (spectral_attach : 247) | |
| [ 29.030000] SPECTRAL : get_capability not registered | |
| [ 29.040000] HAL_CAP_SPECTRAL_SCAN : Capable | |
| [ 29.040000] SPECTRAL : get_tsf64 not registered | |
| [ 29.040000] spectral_init_netlink 85 NULL SKB | |
| [ 29.050000] Green-AP : Green-AP : Attached | |
| [ 29.050000] | |
| [ 29.050000] Green-AP : Attached | |
| [ 29.060000] rate power table override is only supported for AR98XX | |
| [ 29.060000] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. | |
| [ 29.070000] ol_if_dfs_attach: called; ptr=84c5197c, radar_info=860b1b38 | |
| [ 29.080000] dfs_attach: event log enabled by default | |
| [ 29.090000] >>>> CB Set 00000000 | |
| [ 29.090000] ol_ath_attach() UMAC attach . | |
| [ 29.090000] | |
| [ 29.090000] BURSTING enabled by default | |
| [ 29.100000] ol_ath_attach: Set global_ic[2] ..ptr:86357d10 | |
| [ 29.110000] ath_lowi_if_netlink_init LOWI Netlink successfully created | |
| [ 29.110000] osif_wrap_attach:444 osif wrap attached | |
| [ 29.120000] osif_wrap_devt_init:405 osif wrap dev table init done | |
| [ 29.120000] Wrap Attached: Wrap_com =85373c00 ic->ic_wrap_com=85373c00 &wrap_com->wc_devt=85373c00 | |
| [ 29.130000] __ol_ath_attach: needed_headroom reservation 60 | |
| [ 29.140000] ol_ath_thermal_mitigation_attach: -- | |
| [ 29.140000] ol_ath_pci_probe num_radios=0, wifi_radios[0].sc = 85f00380 wifi_radio_type = 2 | |
| [ 29.150000] ath_sysfs_diag_init: diag_fsattr | |
| [ 29.160000] Suspending Target scn=85f00380 | |
| [ 29.160000] waiting for target paused event from target | |
| [ 29.200000] ol_ath_thermal_mitigation_detach: ++ | |
| [ 29.200000] ol_ath_thermal_mitigation_detach: -- | |
| [ 29.210000] ol_if_dfs_clist_update: called, cmd=1, nollist=00000000, nentries=0 | |
| [ 29.210000] ce_h2t_tx_ce_cleanup 1039 Fastpath mode ON, Cleaning up HTT Tx CEsmart_log_deinit: Smart logging Disabled | |
| [ 29.230000] ol_tx_me_exit: Already Disabled !!! | |
| [ 29.230000] hif_pci_device_reset: Reset Devicehif_pci_disable_bus: Xhif_disable: Xhif_napi_destroy: NAPI 6 destroyed | |
| [ 29.250000] hif_napi_destroy: no NAPI instances. Zapped.ath_sysfs_diag_fini: diag_fsattr | |
| [ 29.310000] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16 | |
| [ 29.310000] Invalid sc in hif_pktlog_subscribe | |
| [ 29.320000] Unable to subscribe to the HIF pktlog_init | |
| [ 29.380000] __sa_init_module | |
| [ 31.730000] ath_net80211_dfs_clist_update: called, cmd=1, nollist=00000000, nentries=0 | |
| [ 31.740000] ath_attach_dfs[12727] dfsdomain 1 | |
| [ 31.750000] dfs_attach: event log enabled by default | |
| [ 31.860000] Disconnect_timeout value entered:10 | |
| [ 31.870000] reconfiguration_timeout value entered:60 | |
| [ 31.950000] wlan_vap_create : enter. devhandle=0x860c0380, opmode=IEEE80211_M_HOSTAP, flags=0x3 | |
| [ 31.960000] ieee80211_mbo_vattach:MBO Initialized | |
| [ 31.970000] ieee80211_oce_vattach: OCE Initialized | |
| [ 31.970000] wlan_vap_create : exit. devhandle=0x860c0380, vap=0x85110000, opmode=IEEE80211_M_HOSTAP, flags=0x3. | |
| [ 31.980000] __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| [ 31.990000] VAP device ath0 created osifp: (87226380) os_if: (85110000) | |
| [ 32.030000] siwfreq | |
| [ 32.030000] Set freq vap 0 stop send + 85110000 | |
| [ 32.040000] Set freq vap 0 stop send -85110000 | |
| [ 32.070000] Set wait done --85110000 | |
| [ 32.130000] WARNING: Fragmentation with HT mode NOT ALLOWED!! | |
| [ 32.150000] siwfreq | |
| [ 32.150000] Set freq vap 0 stop send + 85110000 | |
| [ 32.160000] Set freq vap 0 stop send -85110000 | |
| [ 32.190000] Set wait done --85110000 | |
| [ 32.360000] Setting Max Stations:64 | |
| [ 32.410000] [DEBUG] vap-0(ath0):set SIOC80211NWID, 12 characters | |
| [ 32.420000] | |
| [ 32.420000] DES SSID SET=TP-Link_A71C | |
| [ 33.330000] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 | |
| [ 33.340000] DEVICE IS DOWN ifname=ath0 | |
| [ 33.340000] DEVICE IS DOWN ifname=ath0 | |
| [ 33.440000] Warning: node not in table 0x84c42000 | |
| [ 33.520000] 8021q: adding VLAN 0 to HW filter on device ath0 | |
| [ 33.740000] Starting the target before sending the command | |
| [ 33.750000] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x56 | |
| [ 33.750000] ath_ol_pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] | |
| [ 33.760000] hif_pci_enable_bus: hif_enable_pci done *********** QCA9888 *************hif_pci_enable_bus: hif_type = E | |
| [ 33.800000] chip_id 0xc chip_revision 0x0 | |
| [ 33.810000] | |
| [ 33.810000] CLOCK PLL skipped | |
| [ 33.810000] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff | |
| [ 33.820000] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL | |
| [ 33.830000] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_config4 | |
| [ 33.860000] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON | |
| [ 33.870000] ol_target_init() BMI inited. | |
| [ 33.880000] ol_target_init() BMI Get Target Info. | |
| [ 33.880000] Chip id: 0xc, chip version: 0x1000000 | |
| [ 33.890000] | |
| [ 33.890000] CE WAR Disabled | |
| [ 33.890000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 | |
| [ 33.900000] ol_target_init() configure Target . | |
| [ 33.900000] | |
| [ 33.900000] Target Version is 1000000 | |
| [ 33.910000] | |
| [ 33.910000] Flash Download Address c0000 | |
| [ 33.920000] ol_transfer_bin_file: flash data file defined | |
| [ 33.920000] ol_transfer_bin_file[3824] Get Caldata for wifi1. | |
| [ 33.930000] qdf_fs_read[66], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:16914836super blocksize:4096ino5 | |
| [ 33.950000] ol_transfer_bin_file 3884: Download Flash data len 12064 | |
| [ 33.950000] Board extended Data download address: 0x0 | |
| [ 33.980000] | |
| [ 33.980000] Board data initialized | |
| [ 33.990000] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 | |
| [ 34.000000] | |
| [ 34.000000] Selecting OTP binary for CHIP Version 0 | |
| [ 34.010000] ol_transfer_bin_file 3706: downloading file 0, Download data len 9116 | |
| [ 34.060000] | |
| [ 34.060000] First OTP send param 8000 | |
| [ 34.300000] ol_ath_download_firmware :First OTP download and Execute is good address:0x5000 return param 4660 | |
| [ 34.310000] ol_ath_download_firmware:##Board Id 20 , CHIP Id 0 | |
| [ 34.320000] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 | |
| [ 34.330000] Warning : No board id matched. Selecting default boarddata file | |
| [ 34.330000] | |
| [ 34.330000] wifi1: Selecting board data file name boarddata_0.bin | |
| [ 34.340000] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9888/hw.2/boarddata_0.bin | |
| [ 34.380000] ol_transfer_bin_file 3706: downloading file 3, Download data len 12064 | |
| [ 34.390000] Board extended Data download address: 0x0 | |
| [ 34.430000] ol_ath_download_firmware: Using 0x1234 for the remainder of init | |
| [ 34.440000] | |
| [ 34.440000] Selecting OTP binary for CHIP Version 0 | |
| [ 34.460000] ol_transfer_bin_file 3706: downloading file 0, Download data len 9116 | |
| [ 34.520000] | |
| [ 34.520000] [Flash] : Ignore Module param | |
| [ 34.530000] | |
| [ 34.530000] Second otp download Param 10000 | |
| true | |
| exit status value = [0x0] | |
| dut is_cal==true. | |
| [ 34.790000] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 | |
| [ 34.800000] | |
| [ 34.800000] Mission mode: Firmware CHIP Version 0 | |
| [ 34.830000] ol_swap_wlan_memory_expansion: length:272731 size_left:272751 dma_size_left:524288 fw_temp:c0960004 fw_e5 | |
| [ 34.850000] ol_swap_wlan_memory_expansion: dma_virt_addr :a5e80000 fw_temp: c0960008 length: 272731 | |
| [ 34.860000] Swap: bytes_left to copy: fw:16; dma_page:251557 | |
| [ 34.870000] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:251557 fw_temp:c09a2967 fw_entry_size5 | |
| [ 34.880000] Swap: wrong length read:0 | |
| [ 34.880000] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 272731 Target address 41b0b8 | |
| [ 34.890000] scn=85f00380 target_write_addr=41b0b8 seg_info=85f89510 | |
| [ 34.900000] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 | |
| [ 34.910000] bin_filename=QCA9888/hw.2/athwlan.bin swap_filename=/lib/firmware/QCA9888/hw.2/athwlan.codeswap.bin | |
| [ 34.920000] ol_transfer_bin_file: Downloading firmware file: QCA9888/hw.2/athwlan.bin | |
| [ 35.060000] ol_transfer_bin_file 3706: downloading file 1, Download data len 393512 | |
| dhcp_hook_d start | |
| dhcp_hook_d end | |
| snmpd start... enable off. | |
| /etc/rc.common: line 98: fw: not found | |
| /etc/rc.common: line 98: fw: not found | |
| /etc/rc.common: line 98: fw: not found | |
| [NM_Error](nm_lib_readPtnUsedSize) 00556: partition not written | |
| |
| [NM_Error](nvrammanager_readPtnFromNvram) 00287: partition is empty | |
| |
| [NM_Error](nm_lib_readPtnUsedSize) 00556: partition not written | |
| |
| [NM_Error](nvrammanager_readPtnFromNvram) 00287: partition is empty | |
| |
| ln: /www/tmp/portal_logo.jpg: File exists | |
| ln: /www/tmp/portal_back.jpg: File exists | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| sh: on: unknown operand | |
| |
| /etc/rc.common: line 1: can't create /sys/br_wifidog/controlled_ifname: nonexistent directory | |
| [ 36.350000] __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| /etc/rc.common: line 1: can't create /proc/sys/net/ipv6/conf//disable_ipv6: nonexistent directory | |
| killall: smartipd: no process killed | |
| sh: missing ] | |
| [smartip_read_cfg 64] lan_ip is 192.168.0.254 | |
| | |
| [smartip_read_cfg 69] lan_mask is 255.255.255.0 | |
| | |
| [smartip_read_cfg 79] lan_type is 1 | |
| | |
| [ 37.200000] ol_target_init() Download FW done. | |
| [ 37.210000] +htc_create .. HIF :85354000-htc_create: (0x85351000) | |
| [ 37.210000] htc_wmi_init() HT Create . 85351000 | |
| [ 37.240000] htc_wmi_init 8276 host_enable 0 nss_nwifi_offload 0 | |
| [ 37.240000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) | |
| [ 37.250000] OL_ACBKMinfree : 0 | |
| [ 37.250000] OL_ACBEMinfree : 0 | |
| [ 37.260000] OL_ACVIMinfree : 0 | |
| [ 37.260000] OL_ACVOMinfree : 0 | |
| [ 37.260000] hif_enable_fastpath, Enabling fastpath mode | |
| [ 37.270000] +HWT | |
| [ 37.270000] hif_completion_thread_startup: pipe_num:0 pipe_info:0x8535706chif_completion_thread_startup: pipe_num:3 c | |
| [ 37.290000] -HWT | |
| [ 37.290000] wmi_unified_register_event_handler : event handler already registered 0x8002 | |
| [ 37.300000] Startup Mode-0 set | |
| [ 37.310000] | |
| [ 37.310000] <=== cfg max peer id 1056 ====> | |
| [ 37.310000] htt_peer_map_timer_init Enter pdev 85ad8000 hrtimer 85adc970 | |
| [ 37.320000] | |
| [ 37.320000] htt_alloc_peer_map_mem : Alloc Success : host q vaddr 85a98000 paddr 5a98000 | |
| [ 37.330000] | |
| [ 37.330000] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts | |
| [ 37.340000] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from 85080000 | |
| [ 37.430000] Firmware_Build_Number:139 | |
| [ 37.440000] host/RAM_fw Build Ver Mismatch: H:0x8C, F:0x8B ! | |
| [ 37.440000] FW wireless modes: 0x1f9001 | |
| [ 37.450000] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339979b2 vht_supp_mcs:0x0000fffa | |
| [ 37.460000] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0 | |
| [ 37.460000] | |
| [ 37.460000] Sending Ext resource cfg: HOST PLATFORM as 1 | |
| [ 37.460000] fw_feature_bitmap as 50 to TGT | |
| [ 37.480000] ol_ath_service_ready_event: tt_support: 1 | |
| [ 37.480000] ol_ath_service_ready_event: periodic_chan_stats: 1 | |
| [ 37.490000] ol_ath_service_ready_event: sw_cal_support_check_flag: 1 | |
| [ 37.490000] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17 | |
| [ 37.500000] EXT NSS Supported | |
| [ 37.510000] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 | |
| [ 37.510000] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, | |
| [ 37.520000] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 | |
| [ 37.530000] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, | |
| [ 37.540000] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 | |
| [ 37.550000] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, | |
| [ 37.550000] idx 0 req 1 num_units 0 num_unit_info 2 unit size 880 actual units 531 | |
| [ 37.560000] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 880, | |
| [ 37.570000] idx 4 req 5 num_units 0 num_unit_info 2 unit size 2076 actual units 531 | |
| [ 37.580000] ol_ath_alloc_host_mem_chunk req_id 5 idx 4 num_units 531 unit_len 2076, | |
| [ 37.590000] Support not added yet for Service 91 | |
| [ 37.590000] Support not added yet for Service 92 | |
| [ 37.600000] No EXT_MSG send INIT now | |
| [ 37.600000] chunk 0 len 13568 requested , ptr 0x5378000 | |
| [ 37.600000] chunk 1 len 54272 requested , ptr 0x53e0000 | |
| [ 37.610000] chunk 2 len 217088 requested , ptr 0x4c00000 | |
| [ 37.620000] chunk 3 len 467280 requested , ptr 0x4c80000 | |
| [ 37.620000] chunk 4 len 1102356 requested , ptr 0x4e00000 | |
| [ 37.630000] chunk 5 len 0 requested , ptr 0xffffffff | |
| [ 37.630000] ol_ath_service_ready_event[4275] WAPI MBSSID 2 | |
| [ 37.640000] smart_log_init: Smart logging Enabled buf=pK-error (size=65536) | |
| [ 37.660000] Version = 16777216 3 status = 0 | |
| [ 37.660000] ol_ath_connect_htc() WMI is ready | |
| [ 37.670000] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1 | |
| [ 37.680000] target uses HTT version 2.2; host uses 2.2 | |
| [ 37.690000] wmi_unified_register_event_handler : event handler already registered 0x900b | |
| [ 37.700000] wmi_unified_register_event_handler : event handler already registered 0x9042 | |
| [ 37.700000] >>>> CB Set 00000000 | |
| [ 37.710000] ol_ath_thermal_mitigation_attach: -- | |
| [ 37.710000] ath_sysfs_diag_init: diag_fsattr | |
| ...cat... | |
| [ 38.050000] [ol_ath_iw_setcountry][1894] *p=44, *(p+1)=45 | |
| [ 38.060000] isCountryCodeValid: EEPROM regdomain 0x0 | |
| [ 38.060000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 | |
| [ 38.070000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 | |
| [ 38.080000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 | |
| [ 38.080000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 | |
| [ 38.090000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 | |
| [ 38.100000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 | |
| [ 38.110000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 | |
| [ 38.110000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 | |
| [ 38.120000] Add VHT80 channel: 5210 | |
| [ 38.120000] Add VHT80 channel: 5290 | |
| [ 38.130000] Add VHT80 channel: 5530 | |
| [ 38.130000] Add VHT80 channel: 5610 | |
| [ 38.140000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 | |
| [ 38.140000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 | |
| [ 38.230000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [ 38.240000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [ 38.250000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [ 38.260000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 ) | |
| [ 38.260000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x100, 0x11e1a300 ) | |
| [ 38.270000] [wifi1] FWLOG: [9127] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x199, 0x130, 0x30, 0x0 ) | |
| [ 38.280000] [wifi1] FWLOG: [9127] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x30, 0x0, 0x30, 0x0 ) | |
| [ 38.400000] set TXBF_SND_PERIOD: value 100 wmi_status 0 | |
| [ 38.490000] del ct event: 2 dev_name: br-lan | |
| [ 38.500000] start clean up ct iterate.. | |
| [ 38.520000] Disconnect_timeout value entered:10 | |
| [ 38.530000] reconfiguration_timeout value entered:60 | |
| [ 38.530000] ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [ 38.630000] device eth0 left promiscuous mode | |
| [ 38.630000] br-lan: port 1(eth0) entered disabled state | |
| [ 38.700000] @@@@@@ add br-lan!!! | |
| [ 38.700000] @@@@@@ add br-lan!!! | |
| [ 38.700000] device eth0 entered promiscuous mode | |
| [ 38.760000] [ changeLanIp ] 1692: changeLanIp to 0xc0a800fe | |
| [ 38.760000] del ct event: 2 dev_name: lo | |
| [ 38.860000] start clean up ct iterate.. | |
| [ 38.870000] del ct event: 2 dev_name: lo | |
| [ 38.870000] start clean up ct iterate.. | |
| [ 39.020000] wlan_vap_create : enter. devhandle=0x85f00380, opmode=IEEE80211_M_HOSTAP, flags=0x3 | |
| [ 39.030000] send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = e4:c3:2a:33:a7:1b: | |
| [ 39.040000] ieee80211_mbo_vattach:MBO Initialized | |
| [ 39.050000] ieee80211_oce_vattach: OCE Initialized | |
| [ 39.050000] wlan_vap_create : exit. devhandle=0x85f00380, vap=0x84420000, opmode=IEEE80211_M_HOSTAP, flags=0x3. | |
| [ 39.060000] __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| [ 39.070000] Enabling TX checksum bit for the vap ath1 features 4000 | |
| [ 39.080000] Enabling SG bit for the vap ath1 features 4000 | |
| [ 39.080000] Enabling SG bit for the vap ath1 features 4000 | |
| [ 39.090000] Enabling TSO bit for the vap ath1 features 4000 | |
| [ 39.090000] Enabling LRO bit for the vap ath1 features 4000 | |
| [ 39.100000] VAP device ath1 created osifp: (85352b80) os_if: (84420000) | |
| [ 39.230000] [wifi1] FWLOG: [9279] WAL_DBGID_DEV_RESET ( 0xc01d, 0x47b ) | |
| [ 39.330000] siwfreq | |
| [ 39.330000] Set freq vap 0 stop send + 84420000 | |
| [ 39.330000] Set freq vap 0 stop send -84420000 | |
| [ 39.370000] Set wait done --84420000 | |
| [ 39.430000] siwfreq | |
| [ 39.430000] Set freq vap 0 stop send + 84420000 | |
| [ 39.440000] Set freq vap 0 stop send -84420000 | |
| [ 39.470000] Set wait done --84420000 | |
| ...cat done... | |
| [ 39.590000] WARNING: Fragmentation with HT mode NOT ALLOWED!! | |
| [ 39.620000] siwfreq | |
| [ 39.620000] Set freq vap 0 stop send + 84420000 | |
| [ 39.630000] Set freq vap 0 stop send -84420000 | |
| [ 39.660000] Set wait done --84420000 | |
| [ 39.760000] ME Pool succesfully initialized vaddr - 84440000 paddr - 0 | |
| [ 39.760000] num_elems = 1424 buf_size - 64 pool_size = 102528 | |
| [ 39.770000] Enable MCAST_TO_UCAST | |
| [ 39.890000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| [ 39.910000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| [ 39.920000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| [ 40.030000] Setting Max Stations:64 | |
| [ 40.060000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 | |
| [ 40.070000] su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| [ 40.090000] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| [ 40.110000] [DEBUG] vap-0(ath1):set SIOC80211NWID, 15 characters | |
| [ 40.120000] | |
| [ 40.120000] DES SSID SET=TP-Link_A71C_5G | |
| [ 40.230000] [wifi1] FWLOG: [10813] vap-0 WMI_CMD_PARAMS ( 0xff, 0x40, 0x1 ) | |
| [ 40.640000] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 | |
| [ 40.640000] DEVICE IS DOWN ifname=ath1 | |
| [ 40.650000] DEVICE IS DOWN ifname=ath1 | |
| [ 40.660000] Switching to Tx Mode-0 | |
| [ 41.070000] Sending SCAN START cmd | |
| [ 41.070000] 8021q: adding VLAN 0 to HW filter on device ath1 | |
| [ 41.230000] [wifi1] FWLOG: [12075] WAL_DBGID_SECURITY_ENCR_EN ( ) | |
| [ 41.240000] [wifi1] FWLOG: [12075] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) | |
| [ 41.240000] [wifi1] FWLOG: [12118] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [ 41.720000] device ath0 entered promiscuous mode | |
| [ 41.730000] br-lan: port 2(ath0) entered forwarding state | |
| [ 41.730000] br-lan: port 2(ath0) entered forwarding state | |
| [ 41.770000] device ath1 entered promiscuous mode | |
| [ 41.780000] br-lan: port 3(ath1) entered forwarding state | |
| [ 41.780000] br-lan: port 3(ath1) entered forwarding state | |
| [ 42.230000] [wifi1] FWLOG: [12433] WAL channel change freq=5200, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [ 42.240000] [wifi1] FWLOG: [12748] WAL channel change freq=5220, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [ 42.250000] [wifi1] FWLOG: [13062] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1 | |
| [ 42.300000] send_vdev_down_cmd_non_tlv for vap 0 | |
| [ 42.310000] OL vap_start + | |
| [ 42.310000] VDEV START | |
| [ 42.310000] OL vap_start - | |
| [ 42.310000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 | |
| [ 42.480000] device eth0 left promiscuous mode | |
| [ 42.490000] br-lan: port 1(eth0) entered disabled state | |
| [ 42.500000] ol_vdev_start_resp_ev for vap 0 (pK-error) | |
| [ 42.500000] send_wmm_update_cmd_non_tlv: | |
| [ 42.510000] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| [ 42.510000] send_vdev_up_cmd_non_tlv for vap 0 | |
| [ 42.520000] Beacon mode set to staggered. Cannot enable FD | |
| [ 42.520000] __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| [ 42.540000] ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [ 42.540000] del ct event: 2 dev_name: br-lan | |
| [ 42.550000] start clean up ct iterate.. | |
| [NM_Error](nm_lib_readPtnUsedSize) 00556: partition not written | |
| |
| [NM_Error](nvrammanager_readPtnFromNvram) 00287: partition is empty | |
| |
| [ 42.580000] @@@@@@ add br-lan!!! | |
| [ 42.580000] device eth0 entered promiscuous mode | |
| [ 42.610000] [ changeLanIp ] 1692: changeLanIp to 0xc0a800fe | |
| [ 42.610000] | |
| [ 42.730000] ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [smartip_start_process 525] smartipd start dnsmasq........... | |
| | |
| [NM_Error](nm_lib_readPtnUsedSize) 00556: partition not written | |
| |
| [NM_Error](nvrammanager_readPtnFromNvram) 00287: partition is empty | |
| |
| [ 43.240000] [wifi1] FWLOG: [13381] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [ 43.240000] [wifi1] FWLOG: [13381] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [ 43.250000] [wifi1] FWLOG: [13386] vap-0 VDEV_MGR_VDEV_START ( 0x1478, 0x2, 0x0, 0x0 ) | |
| [ 43.260000] [wifi1] FWLOG: [13387] WAL channel change freq=5240, mode=10 flags=0 rx_ok=1 tx_ok=1 | |
| [ 43.270000] [wifi1] FWLOG: [13577] VDEV_MGR_VDEV_START_RESP ( 0x0 ) | |
| [ 43.270000] [wifi1] FWLOG: [13599] VDEV_MGR_HP_START_TIME ( 0x0, 0x1478, 0x4b0001 ) | |
| [ 43.280000] [wifi1] FWLOG: [13599] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 ) | |
| [ 43.290000] [wifi1] FWLOG: [13599] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) | |
| [ 43.290000] [wifi1] FWLOG: [13599] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x1478, 0x0, 0x0 ) | |
| |
| [DEBUG] dnsmasq flock before | |
| [DEBUG]: Read config file lines: # auto-generated config file from /etc/config/dhcp | |
| |
| [DEBUG]: Read config file lines: conf-file=/etc/dnsmasq.conf | |
| |
| [DEBUG]: Read config file lines: # Change the following lines if you want dnsmasq to serve SRV | |
| |
| [DEBUG]: Read config file lines: # records. | |
| |
| [DEBUG]: Read config file lines: # You may add multiple srv-host lines. | |
| |
| [DEBUG]: Read config file lines: # The fields are <name>,<target>,<port>,<priority>,<weight> | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: # A SRV record sending LDAP for the example.com domain to | |
| |
| [DEBUG]: Read config file lines: # ldapserver.example.com port 289 | |
| |
| [DEBUG]: Read config file lines: #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: # Two SRV records for LDAP, each with different priorities | |
| |
| [DEBUG]: Read config file lines: #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 | |
| |
| [DEBUG]: Read config file lines: #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: # A SRV record indicating that there is no LDAP server for the domain | |
| |
| [DEBUG]: Read config file lines: # example.com | |
| |
| [DEBUG]: Read config file lines: #srv-host=_ldap._tcp.example.com | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: # The following line shows how to make dnsmasq serve an arbitrary PTR | |
| |
| [DEBUG]: Read config file lines: # record. This is useful for DNS-SD. | |
| |
| [DEBUG]: Read config file lines: # The fields are <name>,<target> | |
| |
| [DEBUG]: Read config file lines: #ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services" | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: # Change the following lines to enable dnsmasq to serve TXT records. | |
| |
| [DEBUG]: Read config file lines: # These are used for things like SPF and zeroconf. | |
| |
| [DEBUG]: Read config file lines: # The fields are <name>,<text>,<text>... | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: #Example SPF. | |
| |
| [DEBUG]: Read config file lines: #txt-record=example.com,"v=spf1 a -all" | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: #Example zeroconf | |
| |
| [DEBUG]: Read config file lines: #txt-record=_http._tcp.example.com,name=value,paper=A4 | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: # Provide an alias for a "local" DNS name. Note that this _only_ works | |
| |
| [DEBUG]: Read config file lines: # for targets which are names from DHCP or /etc/hosts. Give host | |
| |
| [DEBUG]: Read config file lines: # "bert" another name, bertrand | |
| |
| [DEBUG]: Read config file lines: # The fields are <cname>,<target> | |
| |
| [DEBUG]: Read config file lines: #cname=bertand,bert | |
| |
| [DEBUG]: Read config file lines: cname=tplinklogin.net,tplinkap.net | |
| |
| [DEBUG]: Read config file lines: dhcp-authoritative | |
| |
| [DEBUG]: Read config file lines: domain-needed | |
| |
| [DEBUG]: Read config file lines: localise-queries | |
| |
| [DEBUG]: Read config file lines: read-ethers | |
| |
| [DEBUG]: Read config file lines: bogus-priv | |
| |
| [DEBUG]: Read config file lines: expand-hosts | |
| |
| [DEBUG]: Read config file lines: server=/lan/ | |
| |
| [DEBUG]: Read config file lines: dhcp-leasefile=/tmp/dhcp.leases | |
| |
| [DEBUG]: Read config file lines: resolv-file=/tmp/resolv.conf.auto | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: dhcp-range=lan,192.168.0.100,192.168.0.199,255.255.255.0,1m | |
| |
| [DEBUG]: Read config file lines: dhcp-option=lan,3,192.168.0.254 | |
| |
| [DEBUG]: Read config file lines: dhcp-option=lan,6,0.0.0.0,0.0.0.0 | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: | |
| |
| [DEBUG]: Read config file lines: address=/TL-WA1201v2/192.168.0.254 | |
| |
| [DEBUG]: Read config file lines: ptr-record=254.0.168.192.in-addr.arpa,TL-WA1201v2 | |
| |
| [DEBUG] dnsmasq flock end | |
| [ 45.400000] ieee80211_ioctl_kickmac[10815] | |
| [ 45.420000] ieee80211_ioctl_kickmac[10815] | |
| [ 45.890000] eth0: link up (1000Mbps/Full duplex) | |
| [ 45.890000] br-lan: port 1(eth0) entered forwarding state | |
| [ 45.900000] br-lan: port 1(eth0) entered forwarding state | |
| [ 45.900000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| hotplug ifup lan, then restart wifidog | |
| [ 50.920000] tp_domain: ap mode | |
| [ 50.950000] Lan Domain: tplinklogin.net | |
| [ 50.960000] Lan Domain: www.tplinklogin.net | |
| |
| [ 51.890000] br-lan: port 1(eth0) entered disabled state | |
| [ 52.000000] eth0: link down | |
| [smartip_create_ibus_thread 41] create ibus thread successfully | |
| | |
| [smartip_start_process 530] smartipd start udhcpc.......... | |
| | |
| [smartip_ibus_handle_dhcp_event 1702] smartip: udhcpc detect no dhcp server | |
| | |
| |
| |
| |
| BusyBox v1.19.4 (2020-07-09 17:34:11 CST) built-in shell (ash) | |
| Enter 'help' for a list of built-in commands. | |
| |
| MM NM MMMMMMM M M | |
| $MMMMM MMMMM MMMMMMMMMMM MMM MMM | |
| MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM | |
| MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM' | |
| MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM | |
| MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM | |
| MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM | |
| MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM | |
| MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM | |
| MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM | |
| MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM | |
| MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM | |
| MMMMMM MMMMN M MMMMMMMMM MMMM MMMM | |
| MMMM M MMMMMMM M M | |
| M | |
| --------------------------------------------------------------- | |
| For those about to rock... (%C, %R) | |
| --------------------------------------------------------------- | |
| root@TL-WA1201v2:/# | |
| /nowiki> | |
| </WRAP>\\ | |
| |
| ==== OpenWrt bootlog ==== | |
| <WRAP bootlog> | |
| <nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki> | |
| </WRAP>\\ | |
| |
| ===== Notes ===== | |
| Forum discussion at https://forum.openwrt.org/t/adding-openwrt-support-for-tl-wa1201-v2/96972 | |
| ===== Tags ===== | |
| {{tag>ath79}} | |
| {{tag>16flash 512ram}} | |
| {{tag>1port}} | |
| {{tag>GigabitEthernet}} | |
| {{tag>802.11ac}} | |
| {{tag>802.11abgn}} | |