TP-Link TL-WA1201 v2

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

TL-WA1201 V2

FIXME

  1. This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
  2. There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
  3. When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.
  • Please include only model specific information, omit bla,bla and put everything generic into separate articles
  • If you have no time to write certain stuff, link to docs
  • base-system should lead the way, do not explain this again
  • DO NOT provide a complete howto here! Instead groom the general documentation.

FIXME Find out flash layout, then add the flash layout table here (copy, paste, modify the example).

Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.

  1. Reset router to factory defaults if it has been previously configured.
  2. Apply factory image in OEM firmware web-gui. Wait a minute after the progress bar completes and restart the device.

generic.flashing.tftp

  1. Solder wires onto UART testpoints and attach a terminal.
  2. Boot the device and press enter to enter u-boot's menu.
  3. Issue the following commands
    setenv serverip your-server-ip
    setenv ipaddr your-device-ip
    tftp 0x80060000 openwrt-squashfs.bin (Rembember output of size in hex, henceforth "sizeinhex")
    erase 0x9f030000 +"sizeinhex"
    cp.b 0x80060000 0x9f030000 0x"sizeinhex"
    reboot

Specific values needed for tftp

FIXME Enter values for “FILL-IN” below

Bootloader tftp server IPv4 address FILL-IN
Bootloader MAC address (special) FILL-IN
Firmware tftp image Latest OpenWrt release (NOTE: Name must contain “tftp”)
TFTP transfer window FILL-IN seconds
TFTP window start approximately FILL-IN seconds after power on
TFTP client required IP address FILL-IN

generic.sysupgrade

FIXME These are generic instructions. Update with your router's specifics.

  • Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
  • Upload image file for sysupgrade to LuCI
  • Wait for reboot

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

  • sysupgrade
  • mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

FIXME Please fill in real values for this device, then remove the EXAMPLEs

The default network configuration is:

Interface Name Description Default configuration
br-lan EXAMPLE LAN & WiFi EXAMPLE 192.168.1.1/24
vlan0 (eth0.0) EXAMPLE LAN ports (1 to 4) EXAMPLE None
vlan1 (eth0.1) EXAMPLE WAN port EXAMPLE DHCP
wl0 EXAMPLE WiFi EXAMPLE Disabled

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port Switch port
Internet (WAN) EXAMPLE 4
LAN 1 EXAMPLE 3
LAN 2 EXAMPLE 2
LAN 3 EXAMPLE 1
LAN 4 EXAMPLE 0

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

FIXME Please fill in real values for this device, then remove the EXAMPLEs

The TP-Link TL-WA1201 has the following buttons:

BUTTON Event
EXAMPLE Reset reset
EXAMPLE Secure Easy Setup ses
EXAMPLE No buttons at all. -

Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Backside label:
Insert photo of backside label

Note: This will void your warranty!

Remove two screws at the bottom of the device.

Main PCB:
Insert photo of PCB

port.serial general information about the serial port, serial port cable, etc.

There is no serial header on the PCB. You have to solder wires to the pads named TP_UART_IN, TP_UART_OUT and GND. TP_UART_OUT is hidden in the metal casing which you have to pry of with force (best using a screwdriver). This procedure is similar to the Archer C6 V2.

Serial connection parameters
for TP-Link TL-WA1201 v2
115200, 8N1

No JTAG available.

U-Boot 1.1.4-g2613920e-dirty (Jul 9 2020 - 16:54:18) ap152 - Dragonfly 1.0 DRAM: 128 MB Top of RAM usable for U-Boot at: 88000000 Reserving 381k for U-Boot at: 87fa0000 Reserving 192k for malloc() at: 87f70000 Reserving 44 Bytes for Board Info at: 87f6ffd4 Reserving 36 Bytes for Global Data at: 87f6ffb0 Reserving 128k for boot params() at: 87f4ffb0 Stack Pointer at: 87f4ff98 Now running in RAM - U-Boot at: 87fa0000 Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18 flash size 16MB, sector count = 256 Flash: 16 MB Using default environment In: serial Out: serial Err: serial Net: ath_gmac_enet_initialize... No valid address in Flash. Using fixed address ath_gmac_enet_initialize: reset mask:c02200 athr_mgmt_init ::done Dragonfly ----> S17 PHY * phy_hw_cfg 10. Max resets limit reached exiting... athr_gmac_sgmii_setup SGMII done : cfg1 0x80000000 cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up eth0 Setting 0x181162c0 to 0x40802100 Hit any key to stop autoboot: 0 ## Booting image at 9f030000 ... Image Name: MIPS OpenWrt Linux-3.3.8 Created: 2020-07-09 10:03:54 UTC Image Type: MIPS Linux Multi-File Image (lzma compressed) Data Size: 1045963 Bytes = 1021.4 kB Load Address: 80060000 Entry Point: 80060000 Contents: Image 0: 1045955 Bytes = 1021.4 kB Verifying Checksum at 0x9f030040 ...OK Uncompressing Multi-File Image ... OK No initrd ## Transferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 134217728 Starting kernel ... [ 0.000000] Linux version 3.3.8 (tplink@whattestfortplink) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-0 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019750 (MIPS 74Kc) [ 0.000000] SoC: Qualcomm Atheros QCA956X rev 0 [ 0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] User-defined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00008000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00008000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 board=AP152 rootfstype=squashfs init=/etc/preinit mtdparts=spc [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 126352k/131072k available (2234k kernel code, 4720k reserved, 547k data, 180k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:83 [ 0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) [ 0.060000] pid_max: default: 32768 minimum: 301 [ 0.060000] Mount-cache hash table entries: 512 [ 0.070000] NET: Registered protocol family 16 [ 0.070000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79 [ 0.080000] MIPS: machine is TP-LINK TL-WA1201 v2 support [ 0.590000] Max resets limit reached exiting... [ 0.600000] [ 0.600000] WLAN firmware dump buffer allocation of 2097152 bytes @ address 0x87a00000- SUCCESS !!! [ 0.610000] registering PCI controller with io_map_base unset [ 0.820000] bio: create slab <bio-0> at 0 [ 0.820000] PCI host bridge to bus 0000:00 [ 0.820000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] [ 0.830000] pci_bus 0000:00: root bus resource [io 0x0001] [ 0.830000] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] [ 0.840000] pci 0000:00:00.0: using irq 40 for pin 1 [ 0.840000] Switching to clocksource MIPS [ 0.850000] NET: Registered protocol family 2 [ 0.850000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.850000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.860000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.860000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.870000] TCP reno registered [ 0.870000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.880000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.880000] NET: Registered protocol family 1 [ 0.900000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.900000] msgmni has been set to 246 [ 0.910000] io scheduler noop registered [ 0.910000] io scheduler deadline registered (default) [ 0.920000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.940000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A [ 0.950000] console [ttyS0] enabled, bootconsole disabled [ 0.950000] console [ttyS0] enabled, bootconsole disabled [ 0.960000] m25p80 spi0.0: found w25q128, expected m25p80 [ 0.970000] m25p80 spi0.0: w25q128 (16384 Kbytes) [ 0.970000] 4 cmdlinepart partitions found on MTD device spi0.0 [ 0.980000] Creating 4 MTD partitions on "spi0.0": [ 0.980000] 0x000000000000-0x000000030000 : "u-boot" [ 0.990000] 0x000000030000-0x000000150000 : "uImage" [ 1.000000] 0x000000150000-0x000000fe0000 : "rootfs" [ 1.000000] mtd: partition "rootfs" set to be root filesystem [ 1.010000] 0x000000ff0000-0x000001000000 : "ART" [ 1.010000] m25p80 spi0.1: found pm25lv512, expected m25p80 [ 1.020000] m25p80 spi0.1: pm25lv512 (64 Kbytes) [ 1.030000] flash_chrdev : flash_chrdev_init [ 1.040000] ag71xx_mdio: probed [ 1.040000] eth0: Atheros AG71xx at 0xb9000000, irq 4 [ 1.600000] TCP cubic registered [ 1.600000] NET: Registered protocol family 17 [ 1.610000] Bridge firewalling registered [ 1.610000] 8021q: 802.1Q VLAN Support v1.8 [ 1.610000] ### of_selftest(): No testcase data in device tree; not running tests [ 1.630000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.630000] Freeing unused kernel memory: 180k freed [ 3.160000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Qualcomm Atheros AR803] - preinit - - regular preinit - jffs2 not ready yet; using ramdisk Support to copy caldata is not there for unknown - init - [ 3.630000] in ag71xx_stop [ 4.240000] liblog: module license 'unspecified' taints kernel. [ 4.250000] Disabling lock debugging due to kernel taint [ 4.470000] NET: Registered protocol family 10 [ 4.670000] Button Hotplug driver version 0.4.1 [ 4.740000] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 4.800000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.920000] nf_conntrack version 0.5.0 (1977 buckets, 7908 max) [ 5.030000] Netfilter messages via NETLINK v0.30. [ 5.050000] ctnetlink v0.93: registering with nfnetlink. [ 5.270000] qca_ssdk: Unknown symbol napt_ct_process_inet_event (err 0) [ 5.300000] AR71XX_RESET_REG_WDOG_CTRL: 0x0 [ 5.300000] reload_profile() begin: reload_profile() end: reloadconfig() begin: user-config size OK:6519 1.untar result is : 0 ................................start of merge user and default........................ ................................parse userconf to get mode............................. ................................end of parse userconf.................................. ................................mode : ap............................... ................................end of merge user and default.......................... ................................new configs merged..................................... reloadconfig() end ########merge_mfconfig() start######## ########merge_mfconfig() end######## Please press Enter to activate this console. [ 9.050000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Qualcomm Atheros AR803] [ 9.060000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.080000] in ag71xx_stop [ 9.080000] del ct event: 2 dev_name: eth0 [ 9.080000] start clean up ct iterate.. [ 9.410000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Qualcomm Atheros AR803] [ 9.420000] ADDRCONF(NETDEV_UP): eth0: link is not ready GMT+00:00 Thu Jul 9 00:00:00 GMT 2020 [SWITCH DEBUG] Clear Port(0) PVID [SWITCH DEBUG] Clear Port(1) PVID [SWITCH DEBUG] Clear Port(2) PVID [SWITCH DEBUG] Clear Port(3) PVID [SWITCH DEBUG] Clear Port(4) PVID [SWITCH DEBUG] Clear Port(5) PVID [SWITCH DEBUG] Flush vlan entries. [SWITCH DEBUG] Create VLAN VID=1 [SWITCH DEBUG] Add tagged port(0) to VLAN(1) [SWITCH DEBUG] Add untagged port(2) to VLAN(1) [SWITCH DEBUG] Add untagged port(3) to VLAN(1) [SWITCH DEBUG] Add untagged port(4) to VLAN(1) [SWITCH DEBUG] Add untagged port(5) to VLAN(1) [SWITCH DEBUG] Set Port(0) PVID(1) [SWITCH DEBUG] Set Port(0) ingress to secure [SWITCH DEBUG] Set Port(2) PVID(1) [SWITCH DEBUG] Set Port(2) ingress to secure [SWITCH DEBUG] Set Port(3) PVID(1) [SWITCH DEBUG] Set Port(3) ingress to secure [SWITCH DEBUG] Set Port(4) PVID(1) [SWITCH DEBUG] Set Port(4) ingress to secure [SWITCH DEBUG] Set Port(5) PVID(1) [SWITCH DEBUG] Set Port(5) ingress to secure [SWITCH DEBUG] Create VLAN VID=4094 [SWITCH DEBUG] Add tagged port(0) to VLAN(4094) [SWITCH DEBUG] Add untagged port(1) to VLAN(4094) [SWITCH DEBUG] Set Port(0) PVID(4094) [SWITCH DEBUG] Set Port(0) ingress to secure [SWITCH DEBUG] Set Port(1) PVID(4094) [SWITCH DEBUG] Set Port(1) ingress to secure [SWITCH DEBUG] Set Port(0) PVID(0) Failed to connect to the switch Failed to connect to the switch Failed to connect to the switch Failed to connect to the switch Failed to connect to the switch /usr/bin/lua: /sbin/ifmac:24: bad argument #1 to 'find' (string expected, got nil) stack traceback: [C]: in function 'find' /sbin/ifmac:24: in function 'dev_set_mac' /sbin/ifmac:60: in function 'iface_set_mac' /sbin/ifmac:64: in function 'main' /sbin/ifmac:67: in main chunk [C]: ? uci: Entry not found uci: Entry not found uci: Entry not found [ 11.250000] ADDRCONF(NETDEV_UP): lo: link is not ready [ 11.260000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.260000] ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.310000] @@@@@@ add br-lan!!! [ 11.320000] device eth0 entered promiscuous mode [ 11.320000] ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 11.350000] [ changeLanIp ] 1692: changeLanIp to 0xc0a800fe [ 11.350000] [ 11.410000] eth0: link up (1000Mbps/Full duplex) [ 11.410000] br-lan: port 1(eth0) entered forwarding state [ 11.420000] br-lan: port 1(eth0) entered forwarding state [ 11.420000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.450000] ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready loading administration management loading with https /etc/rc.common: line 1: fw: not found fw unload_local_mgnt /etc/rc.common: line 1: fw: not found hotplug ifup lan, then restart wifidog [ 18.060000] tp_domain: ap mode [ 18.070000] Lan Domain: tplinklogin.net [ 18.080000] Lan Domain: www.tplinklogin.net start_instance() main generate key: 1825 1024 [ 19.090000] ath_dfs: Version 2.0.0 [ 19.090000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved [ 19.390000] ath_spectral: Version 2.0.0 [ 19.390000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved [ 22.660000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D) [ 22.730000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved [ 22.800000] ath_tx99: Version 2.0 [ 22.800000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved [ 23.090000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved [ 23.330000] JET_PRINT: init_ath_wmac[240]: Checking devid: 3f [ 23.340000] __ath_attach: Set global_scn[0] [ 23.340000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** [ 23.350000] ACBKMinfree = 48 [ 23.360000] ACBEMinfree = 32 [ 23.360000] ACVIMinfree = 16 [ 23.360000] ACVOMinfree = 0 [ 23.370000] CABMinfree = 48 [ 23.370000] UAPSDMinfree = 0 [ 23.370000] ATH_TXBUF=2700 [ 23.380000] Enterprise mode: 0x03bda000 [ 23.390000] Restoring Cal data from FS [ 23.390000] qdf_fs_read[66], Open File /tmp/wifi0.caldata SUCCESS!!file system magic:16914836super blocksize:4096ino8 [ 23.410000] ART Version : -48.0.0 [ 23.410000] SW Image Version : -48.0.0.0.0 [ 23.420000] Board Revision : [ 23.420000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125 [ 23.430000] HAL_CAP_TXDESCLEN : 128 [ 23.430000] HAL_CAP_TXSTATUSLEN : 36 [ 23.440000] HAL_CAP_RXSTATUSLEN : 48 [ 23.440000] SPECTRAL : get_capability not registered [ 23.450000] HAL_CAP_PHYDIAG : Capable [ 23.450000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 242) [ 23.460000] SPECTRAL : get_capability not registered [ 23.460000] HAL_CAP_RADAR : Capable [ 23.470000] SPECTRAL : Need to fix the capablity check for SPECTRAL [ 23.470000] (spectral_attach : 247) [ 23.480000] SPECTRAL : get_capability not registered [ 23.480000] HAL_CAP_SPECTRAL_SCAN : Capable [ 23.490000] SPECTRAL : get_tsf64 not registered [ 23.490000] spectral_init_netlink 85 NULL SKB [ 23.500000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT [ 23.500000] SPECTRAL :----- module attached [ 23.510000] Green-AP : Green-AP : Attached [ 23.510000] [ 23.520000] Starting random number generator thread [ 23.540000] ath_get_caps[6217] rx chainmask mismatch actual 3 sc_chainmak 0 [ 23.540000] ath_get_caps[6180] tx chainmask mismatch actual 3 sc_chainmak 0 [ 23.550000] ieee80211_cbs_init CBS Inited [ 23.560000] band steering initialized for direct attach hardware [ 23.570000] ieee80211_bsteering_attach: Band steering initialized [ 23.570000] acfg_attach: 2979: Netlink socket created:87018c00 [ 23.580000] ath_attach_dfs[12727] dfsdomain 1 [ 23.590000] dfs_attach: event log enabled by default [ 23.600000] SPECTRAL : module already attached [ 23.600000] ath_attach: Set global_ic[1]..gloabl_ic ptr:86357d10 [ 23.610000] osif_wrap_attach:444 osif wrap attached [ 23.610000] osif_wrap_devt_init:405 osif wrap dev table init done [ 23.620000] Wrap Attached: Wrap_com =8713ba00 ic->ic_wrap_com=8713ba00 &wrap_com->wc_devt=8713ba00 [ 23.640000] ath_tx_paprd_init sc 87378000 PAPRD disabled in HAL [ 23.650000] ath_thermal_mitigation_attach: TT not supported [ 23.650000] wifi0: Atheros 956X: mem_start: =0xb8100000, mem_end: =0xb8120000, irq=47 [ 23.660000] ath_da_pci: (Atheros/multi-bss) phyport start ....... [LEO]uhttpd start [ 24.610000] ath_ol_pci: (Atheros/multi-bss) [ 24.610000] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x56 [ 24.620000] ath_ol_pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] [ 24.630000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) [ 24.630000] hif_pci_enable_bus: hif_enable_pci done *********** QCA9888 *************hif_pci_enable_bus: hif_type = E [ 24.680000] chip_id 0xc chip_revision 0x0 [ 24.680000] [ 24.680000] CLOCK PLL skipped [ 24.690000] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff [ 24.690000] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL [ 24.710000] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_config4 [ 24.730000] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON [ 24.740000] __ol_ath_attach() Allocated scn 85f00380 [ 24.750000] __ol_ath_attach: dev name wifi1 [ 24.750000] ol_ath_attach interface_id 1 [ 24.760000] ol_target_init() BMI inited. [ 24.770000] ol_target_init() BMI Get Target Info. [ 24.770000] Chip id: 0xc, chip version: 0x1000000 [ 24.780000] [ 24.780000] CE WAR Disabled [ 24.800000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 [ 24.830000] ol_target_init() configure Target . [ 24.850000] [ 24.850000] Target Version is 1000000 [ 24.860000] [ 24.860000] Flash Download Address c0000 [ 24.860000] ol_transfer_bin_file: flash data file defined [ 24.870000] ol_transfer_bin_file[3824] Get Caldata for wifi1. [ 24.880000] qdf_fs_read[66], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:16914836super blocksize:4096ino5 [ 24.910000] ol_transfer_bin_file 3884: Download Flash data len 12064 [ 24.930000] Board extended Data download address: 0x0 [ 25.020000] [ 25.020000] Board data initialized [ 25.020000] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 [ 25.030000] [ 25.030000] Selecting OTP binary for CHIP Version 0 SETUP port (1) duplex: 1000 full autoneg: on! [ 25.120000] ol_transfer_bin_file 3706: downloading file 0, Download data len 9116 [ 25.170000] [ 25.170000] First OTP send param 8000 [ 25.410000] ol_ath_download_firmware :First OTP download and Execute is good address:0x5000 return param 4660 [ 25.420000] ol_ath_download_firmware:##Board Id 20 , CHIP Id 0 [ 25.430000] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 [ 25.440000] Warning : No board id matched. Selecting default boarddata file [ 25.440000] [ 25.440000] wifi1: Selecting board data file name boarddata_0.bin [ 25.450000] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9888/hw.2/boarddata_0.bin [ 25.480000] ol_transfer_bin_file 3706: downloading file 3, Download data len 12064 [ 25.490000] Board extended Data download address: 0x0 [ 25.510000] ol_ath_download_firmware: Using 0x1234 for the remainder of init [ 25.520000] [ 25.520000] Selecting OTP binary for CHIP Version 0 [ 25.540000] br-lan: port 1(eth0) entered disabled state [ 25.550000] ol_transfer_bin_file 3706: downloading file 0, Download data len 9116 [ 25.600000] [ 25.600000] [Flash] : Ignore Module param [ 25.600000] [ 25.600000] Second otp download Param 10000 [ 25.640000] eth0: link down [ 25.860000] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 [ 25.870000] [ 25.870000] Mission mode: Firmware CHIP Version 0 [ 26.070000] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=524288 [ 26.200000] ol_swap_wlan_memory_expansion: length:272731 size_left:272751 dma_size_left:524288 fw_temp:c081b004 fw_e5 [ 26.210000] ol_swap_wlan_memory_expansion: dma_virt_addr :a5e80000 fw_temp: c081b008 length: 272731 [ 26.230000] Swap: bytes_left to copy: fw:16; dma_page:251557 [ 26.230000] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:251557 fw_temp:c085d967 fw_entry_size5 [ 26.240000] Swap: wrong length read:0 [ 26.250000] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 272731 Target address 41b0b8 [ 26.260000] scn=85f00380 target_write_addr=41b0b8 seg_info=85f89510 [ 26.260000] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 [ 26.270000] bin_filename=QCA9888/hw.2/athwlan.bin swap_filename=/lib/firmware/QCA9888/hw.2/athwlan.codeswap.bin [ 26.280000] ol_transfer_bin_file: Downloading firmware file: QCA9888/hw.2/athwlan.bin [ 26.800000] ol_transfer_bin_file 3706: downloading file 1, Download data len 393512 [ 28.440000] ol_target_init() Download FW done. [ 28.450000] ol_ath_attach() WMI attached. wmi_handle 85f40000 [ 28.450000] wmi_unified_register_event_handler: Event id 62 is unavailable [ 28.460000] +htc_create .. HIF :85924000-htc_create: (0x8722a000) [ 28.470000] htc_wmi_init() HT Create . 8722a000 [ 28.470000] htc_wmi_init 8276 host_enable 0 nss_nwifi_offload 0 [ 28.480000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) [ 28.490000] OL_ACBKMinfree : 0 [ 28.490000] OL_ACBEMinfree : 0 [ 28.490000] OL_ACVIMinfree : 0 [ 28.500000] OL_ACVOMinfree : 0 [ 28.500000] hif_enable_fastpath, Enabling fastpath mode [ 28.500000] +HWT [ 28.510000] hif_completion_thread_startup: pipe_num:0 pipe_info:0x8592706chif_completion_thread_startup: pipe_num:3 c [ 28.530000] -HWT [ 28.530000] Startup Mode-0 set [ 28.530000] [ 28.530000] <=== cfg max peer id 1056 ====> [ 28.540000] htt_peer_map_timer_init Enter pdev 85ae8000 hrtimer 85aec970 [ 28.550000] [ 28.550000] htt_alloc_peer_map_mem : Alloc Success : host q vaddr 85af2000 paddr 5af2000 [ 28.560000] [ 28.560000] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts [ 28.570000] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from 85380000 [ 28.580000] Firmware_Build_Number:139 [ 28.590000] host/RAM_fw Build Ver Mismatch: H:0x8C, F:0x8B ! [ 28.590000] FW wireless modes: 0x1f9001 [ 28.600000] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339979b2 vht_supp_mcs:0x0000fffa [ 28.610000] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0 [ 28.610000] [ 28.610000] Sending Ext resource cfg: HOST PLATFORM as 1 [ 28.610000] fw_feature_bitmap as 50 to TGT [ 28.630000] ol_ath_service_ready_event: tt_support: 1 [ 28.630000] ol_ath_service_ready_event: periodic_chan_stats: 1 [ 28.640000] ol_ath_service_ready_event: sw_cal_support_check_flag: 1 [ 28.640000] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17 [ 28.650000] EXT NSS Supported [ 28.660000] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 [ 28.660000] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, [ 28.670000] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 [ 28.680000] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, [ 28.690000] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 [ 28.700000] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, [ 28.710000] idx 0 req 1 num_units 0 num_unit_info 2 unit size 880 actual units 531 [ 28.720000] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 880, [ 28.720000] idx 4 req 5 num_units 0 num_unit_info 2 unit size 2076 actual units 531 [ 28.740000] ol_ath_alloc_host_mem_chunk req_id 5 idx 4 num_units 531 unit_len 2076, [ 28.750000] Support not added yet for Service 91 [ 28.750000] Support not added yet for Service 92 [ 28.750000] No EXT_MSG send INIT now [ 28.760000] chunk 0 len 13568 requested , ptr 0x5378000 [ 28.760000] chunk 1 len 54272 requested , ptr 0x53e0000 [ 28.770000] chunk 2 len 217088 requested , ptr 0x4c00000 [ 28.770000] chunk 3 len 467280 requested , ptr 0x4c80000 [ 28.780000] chunk 4 len 1102356 requested , ptr 0x4e00000 [ 28.790000] chunk 5 len 0 requested , ptr 0xffffffff [ 28.790000] ol_ath_service_ready_event[4275] WAPI MBSSID 2 [ 28.800000] smart_log_init: Smart logging Enabled buf=pK-error (size=65536) [ 28.820000] Version = 16777216 3 status = 0 [ 28.820000] ol_ath_connect_htc() WMI is ready [ 28.830000] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1 [ 28.840000] target uses HTT version 2.2; host uses 2.2 [ 28.850000] ol_ath_attach() connect HTC. [ 28.850000] bypasswmi : 0 [ 28.850000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, exten. [ 28.870000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 [ 28.870000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 [ 28.880000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 [ 28.890000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 [ 28.890000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 [ 28.900000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 [ 28.910000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 [ 28.920000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 [ 28.920000] Add VHT80 channel: 5210 [ 28.930000] Add VHT80 channel: 5290 [ 28.930000] Add VHT80 channel: 5530 [ 28.940000] Add VHT80 channel: 5610 [ 28.940000] Add VHT80 channel: 5690 [ 28.940000] Add VHT80 channel: 5775 [ 28.950000] Skipping VHT80 channel 5825 [ 28.950000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 [ 28.960000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 [ 28.970000] freq=58 [ 28.970000] freq=106 [ 28.970000] freq=122 [ 28.970000] OL Resmgr Init-ed [ 28.980000] ieee80211_cbs_init CBS Inited [ 28.980000] ieee80211_bsteering_attach: Band steering initialized [ 28.990000] acfg_attach: using existing sock 87018c00 [ 28.990000] SPECTRAL : get_capability not registered [ 29.000000] HAL_CAP_PHYDIAG : Capable [ 29.000000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 242) [ 29.010000] SPECTRAL : get_capability not registered [ 29.020000] HAL_CAP_RADAR : Capable [ 29.020000] SPECTRAL : Need to fix the capablity check for SPECTRAL [ 29.020000] (spectral_attach : 247) [ 29.030000] SPECTRAL : get_capability not registered [ 29.040000] HAL_CAP_SPECTRAL_SCAN : Capable [ 29.040000] SPECTRAL : get_tsf64 not registered [ 29.040000] spectral_init_netlink 85 NULL SKB [ 29.050000] Green-AP : Green-AP : Attached [ 29.050000] [ 29.050000] Green-AP : Attached [ 29.060000] rate power table override is only supported for AR98XX [ 29.060000] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. [ 29.070000] ol_if_dfs_attach: called; ptr=84c5197c, radar_info=860b1b38 [ 29.080000] dfs_attach: event log enabled by default [ 29.090000] >>>> CB Set 00000000 [ 29.090000] ol_ath_attach() UMAC attach . [ 29.090000] [ 29.090000] BURSTING enabled by default [ 29.100000] ol_ath_attach: Set global_ic[2] ..ptr:86357d10 [ 29.110000] ath_lowi_if_netlink_init LOWI Netlink successfully created [ 29.110000] osif_wrap_attach:444 osif wrap attached [ 29.120000] osif_wrap_devt_init:405 osif wrap dev table init done [ 29.120000] Wrap Attached: Wrap_com =85373c00 ic->ic_wrap_com=85373c00 &wrap_com->wc_devt=85373c00 [ 29.130000] __ol_ath_attach: needed_headroom reservation 60 [ 29.140000] ol_ath_thermal_mitigation_attach: -- [ 29.140000] ol_ath_pci_probe num_radios=0, wifi_radios[0].sc = 85f00380 wifi_radio_type = 2 [ 29.150000] ath_sysfs_diag_init: diag_fsattr [ 29.160000] Suspending Target scn=85f00380 [ 29.160000] waiting for target paused event from target [ 29.200000] ol_ath_thermal_mitigation_detach: ++ [ 29.200000] ol_ath_thermal_mitigation_detach: -- [ 29.210000] ol_if_dfs_clist_update: called, cmd=1, nollist=00000000, nentries=0 [ 29.210000] ce_h2t_tx_ce_cleanup 1039 Fastpath mode ON, Cleaning up HTT Tx CEsmart_log_deinit: Smart logging Disabled [ 29.230000] ol_tx_me_exit: Already Disabled !!! [ 29.230000] hif_pci_device_reset: Reset Devicehif_pci_disable_bus: Xhif_disable: Xhif_napi_destroy: NAPI 6 destroyed [ 29.250000] hif_napi_destroy: no NAPI instances. Zapped.ath_sysfs_diag_fini: diag_fsattr [ 29.310000] pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16 [ 29.310000] Invalid sc in hif_pktlog_subscribe [ 29.320000] Unable to subscribe to the HIF pktlog_init [ 29.380000] __sa_init_module [ 31.730000] ath_net80211_dfs_clist_update: called, cmd=1, nollist=00000000, nentries=0 [ 31.740000] ath_attach_dfs[12727] dfsdomain 1 [ 31.750000] dfs_attach: event log enabled by default [ 31.860000] Disconnect_timeout value entered:10 [ 31.870000] reconfiguration_timeout value entered:60 [ 31.950000] wlan_vap_create : enter. devhandle=0x860c0380, opmode=IEEE80211_M_HOSTAP, flags=0x3 [ 31.960000] ieee80211_mbo_vattach:MBO Initialized [ 31.970000] ieee80211_oce_vattach: OCE Initialized [ 31.970000] wlan_vap_create : exit. devhandle=0x860c0380, vap=0x85110000, opmode=IEEE80211_M_HOSTAP, flags=0x3. [ 31.980000] __ieee80211_smart_ant_init: Smart Antenna is not supported [ 31.990000] VAP device ath0 created osifp: (87226380) os_if: (85110000) [ 32.030000] siwfreq [ 32.030000] Set freq vap 0 stop send + 85110000 [ 32.040000] Set freq vap 0 stop send -85110000 [ 32.070000] Set wait done --85110000 [ 32.130000] WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 32.150000] siwfreq [ 32.150000] Set freq vap 0 stop send + 85110000 [ 32.160000] Set freq vap 0 stop send -85110000 [ 32.190000] Set wait done --85110000 [ 32.360000] Setting Max Stations:64 [ 32.410000] [DEBUG] vap-0(ath0):set SIOC80211NWID, 12 characters [ 32.420000] [ 32.420000] DES SSID SET=TP-Link_A71C [ 33.330000] ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 [ 33.340000] DEVICE IS DOWN ifname=ath0 [ 33.340000] DEVICE IS DOWN ifname=ath0 [ 33.440000] Warning: node not in table 0x84c42000 [ 33.520000] 8021q: adding VLAN 0 to HW filter on device ath0 [ 33.740000] Starting the target before sending the command [ 33.750000] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x56 [ 33.750000] ath_ol_pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] [ 33.760000] hif_pci_enable_bus: hif_enable_pci done *********** QCA9888 *************hif_pci_enable_bus: hif_type = E [ 33.800000] chip_id 0xc chip_revision 0x0 [ 33.810000] [ 33.810000] CLOCK PLL skipped [ 33.810000] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff [ 33.820000] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL [ 33.830000] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_config4 [ 33.860000] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON [ 33.870000] ol_target_init() BMI inited. [ 33.880000] ol_target_init() BMI Get Target Info. [ 33.880000] Chip id: 0xc, chip version: 0x1000000 [ 33.890000] [ 33.890000] CE WAR Disabled [ 33.890000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 [ 33.900000] ol_target_init() configure Target . [ 33.900000] [ 33.900000] Target Version is 1000000 [ 33.910000] [ 33.910000] Flash Download Address c0000 [ 33.920000] ol_transfer_bin_file: flash data file defined [ 33.920000] ol_transfer_bin_file[3824] Get Caldata for wifi1. [ 33.930000] qdf_fs_read[66], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:16914836super blocksize:4096ino5 [ 33.950000] ol_transfer_bin_file 3884: Download Flash data len 12064 [ 33.950000] Board extended Data download address: 0x0 [ 33.980000] [ 33.980000] Board data initialized [ 33.990000] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 [ 34.000000] [ 34.000000] Selecting OTP binary for CHIP Version 0 [ 34.010000] ol_transfer_bin_file 3706: downloading file 0, Download data len 9116 [ 34.060000] [ 34.060000] First OTP send param 8000 [ 34.300000] ol_ath_download_firmware :First OTP download and Execute is good address:0x5000 return param 4660 [ 34.310000] ol_ath_download_firmware:##Board Id 20 , CHIP Id 0 [ 34.320000] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 [ 34.330000] Warning : No board id matched. Selecting default boarddata file [ 34.330000] [ 34.330000] wifi1: Selecting board data file name boarddata_0.bin [ 34.340000] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9888/hw.2/boarddata_0.bin [ 34.380000] ol_transfer_bin_file 3706: downloading file 3, Download data len 12064 [ 34.390000] Board extended Data download address: 0x0 [ 34.430000] ol_ath_download_firmware: Using 0x1234 for the remainder of init [ 34.440000] [ 34.440000] Selecting OTP binary for CHIP Version 0 [ 34.460000] ol_transfer_bin_file 3706: downloading file 0, Download data len 9116 [ 34.520000] [ 34.520000] [Flash] : Ignore Module param [ 34.530000] [ 34.530000] Second otp download Param 10000 true exit status value = [0x0] dut is_cal==true. [ 34.790000] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 [ 34.800000] [ 34.800000] Mission mode: Firmware CHIP Version 0 [ 34.830000] ol_swap_wlan_memory_expansion: length:272731 size_left:272751 dma_size_left:524288 fw_temp:c0960004 fw_e5 [ 34.850000] ol_swap_wlan_memory_expansion: dma_virt_addr :a5e80000 fw_temp: c0960008 length: 272731 [ 34.860000] Swap: bytes_left to copy: fw:16; dma_page:251557 [ 34.870000] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:251557 fw_temp:c09a2967 fw_entry_size5 [ 34.880000] Swap: wrong length read:0 [ 34.880000] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 272731 Target address 41b0b8 [ 34.890000] scn=85f00380 target_write_addr=41b0b8 seg_info=85f89510 [ 34.900000] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 [ 34.910000] bin_filename=QCA9888/hw.2/athwlan.bin swap_filename=/lib/firmware/QCA9888/hw.2/athwlan.codeswap.bin [ 34.920000] ol_transfer_bin_file: Downloading firmware file: QCA9888/hw.2/athwlan.bin [ 35.060000] ol_transfer_bin_file 3706: downloading file 1, Download data len 393512 dhcp_hook_d start dhcp_hook_d end snmpd start... enable off. /etc/rc.common: line 98: fw: not found /etc/rc.common: line 98: fw: not found /etc/rc.common: line 98: fw: not found [NM_Error](nm_lib_readPtnUsedSize) 00556: partition not written [NM_Error](nvrammanager_readPtnFromNvram) 00287: partition is empty [NM_Error](nm_lib_readPtnUsedSize) 00556: partition not written [NM_Error](nvrammanager_readPtnFromNvram) 00287: partition is empty ln: /www/tmp/portal_logo.jpg: File exists ln: /www/tmp/portal_back.jpg: File exists sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand sh: on: unknown operand /etc/rc.common: line 1: can't create /sys/br_wifidog/controlled_ifname: nonexistent directory [ 36.350000] __ieee80211_smart_ant_init: Smart Antenna is not supported /etc/rc.common: line 1: can't create /proc/sys/net/ipv6/conf//disable_ipv6: nonexistent directory killall: smartipd: no process killed sh: missing ] [smartip_read_cfg 64] lan_ip is 192.168.0.254 [smartip_read_cfg 69] lan_mask is 255.255.255.0 [smartip_read_cfg 79] lan_type is 1 [ 37.200000] ol_target_init() Download FW done. [ 37.210000] +htc_create .. HIF :85354000-htc_create: (0x85351000) [ 37.210000] htc_wmi_init() HT Create . 85351000 [ 37.240000] htc_wmi_init 8276 host_enable 0 nss_nwifi_offload 0 [ 37.240000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) [ 37.250000] OL_ACBKMinfree : 0 [ 37.250000] OL_ACBEMinfree : 0 [ 37.260000] OL_ACVIMinfree : 0 [ 37.260000] OL_ACVOMinfree : 0 [ 37.260000] hif_enable_fastpath, Enabling fastpath mode [ 37.270000] +HWT [ 37.270000] hif_completion_thread_startup: pipe_num:0 pipe_info:0x8535706chif_completion_thread_startup: pipe_num:3 c [ 37.290000] -HWT [ 37.290000] wmi_unified_register_event_handler : event handler already registered 0x8002 [ 37.300000] Startup Mode-0 set [ 37.310000] [ 37.310000] <=== cfg max peer id 1056 ====> [ 37.310000] htt_peer_map_timer_init Enter pdev 85ad8000 hrtimer 85adc970 [ 37.320000] [ 37.320000] htt_alloc_peer_map_mem : Alloc Success : host q vaddr 85a98000 paddr 5a98000 [ 37.330000] [ 37.330000] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts [ 37.340000] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from 85080000 [ 37.430000] Firmware_Build_Number:139 [ 37.440000] host/RAM_fw Build Ver Mismatch: H:0x8C, F:0x8B ! [ 37.440000] FW wireless modes: 0x1f9001 [ 37.450000] num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339979b2 vht_supp_mcs:0x0000fffa [ 37.460000] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0 [ 37.460000] [ 37.460000] Sending Ext resource cfg: HOST PLATFORM as 1 [ 37.460000] fw_feature_bitmap as 50 to TGT [ 37.480000] ol_ath_service_ready_event: tt_support: 1 [ 37.480000] ol_ath_service_ready_event: periodic_chan_stats: 1 [ 37.490000] ol_ath_service_ready_event: sw_cal_support_check_flag: 1 [ 37.490000] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17 [ 37.500000] EXT NSS Supported [ 37.510000] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 [ 37.510000] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, [ 37.520000] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 [ 37.530000] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, [ 37.540000] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 [ 37.550000] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, [ 37.550000] idx 0 req 1 num_units 0 num_unit_info 2 unit size 880 actual units 531 [ 37.560000] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 880, [ 37.570000] idx 4 req 5 num_units 0 num_unit_info 2 unit size 2076 actual units 531 [ 37.580000] ol_ath_alloc_host_mem_chunk req_id 5 idx 4 num_units 531 unit_len 2076, [ 37.590000] Support not added yet for Service 91 [ 37.590000] Support not added yet for Service 92 [ 37.600000] No EXT_MSG send INIT now [ 37.600000] chunk 0 len 13568 requested , ptr 0x5378000 [ 37.600000] chunk 1 len 54272 requested , ptr 0x53e0000 [ 37.610000] chunk 2 len 217088 requested , ptr 0x4c00000 [ 37.620000] chunk 3 len 467280 requested , ptr 0x4c80000 [ 37.620000] chunk 4 len 1102356 requested , ptr 0x4e00000 [ 37.630000] chunk 5 len 0 requested , ptr 0xffffffff [ 37.630000] ol_ath_service_ready_event[4275] WAPI MBSSID 2 [ 37.640000] smart_log_init: Smart logging Enabled buf=pK-error (size=65536) [ 37.660000] Version = 16777216 3 status = 0 [ 37.660000] ol_ath_connect_htc() WMI is ready [ 37.670000] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1 [ 37.680000] target uses HTT version 2.2; host uses 2.2 [ 37.690000] wmi_unified_register_event_handler : event handler already registered 0x900b [ 37.700000] wmi_unified_register_event_handler : event handler already registered 0x9042 [ 37.700000] >>>> CB Set 00000000 [ 37.710000] ol_ath_thermal_mitigation_attach: -- [ 37.710000] ath_sysfs_diag_init: diag_fsattr ...cat... [ 38.050000] [ol_ath_iw_setcountry][1894] *p=44, *(p+1)=45 [ 38.060000] isCountryCodeValid: EEPROM regdomain 0x0 [ 38.060000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 [ 38.070000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 [ 38.080000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 [ 38.080000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 [ 38.090000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 [ 38.100000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 [ 38.110000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 [ 38.110000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 [ 38.120000] Add VHT80 channel: 5210 [ 38.120000] Add VHT80 channel: 5290 [ 38.130000] Add VHT80 channel: 5530 [ 38.130000] Add VHT80 channel: 5610 [ 38.140000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 [ 38.140000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 [ 38.230000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 ) [ 38.240000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 ) [ 38.250000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 ) [ 38.260000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 ) [ 38.260000] [wifi1] FWLOG: [8618] WAL_DBGID_TX_AC_BUFFER_SET ( 0x100, 0x11e1a300 ) [ 38.270000] [wifi1] FWLOG: [9127] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x199, 0x130, 0x30, 0x0 ) [ 38.280000] [wifi1] FWLOG: [9127] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x30, 0x0, 0x30, 0x0 ) [ 38.400000] set TXBF_SND_PERIOD: value 100 wmi_status 0 [ 38.490000] del ct event: 2 dev_name: br-lan [ 38.500000] start clean up ct iterate.. [ 38.520000] Disconnect_timeout value entered:10 [ 38.530000] reconfiguration_timeout value entered:60 [ 38.530000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.630000] device eth0 left promiscuous mode [ 38.630000] br-lan: port 1(eth0) entered disabled state [ 38.700000] @@@@@@ add br-lan!!! [ 38.700000] @@@@@@ add br-lan!!! [ 38.700000] device eth0 entered promiscuous mode [ 38.760000] [ changeLanIp ] 1692: changeLanIp to 0xc0a800fe [ 38.760000] del ct event: 2 dev_name: lo [ 38.860000] start clean up ct iterate.. [ 38.870000] del ct event: 2 dev_name: lo [ 38.870000] start clean up ct iterate.. [ 39.020000] wlan_vap_create : enter. devhandle=0x85f00380, opmode=IEEE80211_M_HOSTAP, flags=0x3 [ 39.030000] send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = e4:c3:2a:33:a7:1b: [ 39.040000] ieee80211_mbo_vattach:MBO Initialized [ 39.050000] ieee80211_oce_vattach: OCE Initialized [ 39.050000] wlan_vap_create : exit. devhandle=0x85f00380, vap=0x84420000, opmode=IEEE80211_M_HOSTAP, flags=0x3. [ 39.060000] __ieee80211_smart_ant_init: Smart Antenna is not supported [ 39.070000] Enabling TX checksum bit for the vap ath1 features 4000 [ 39.080000] Enabling SG bit for the vap ath1 features 4000 [ 39.080000] Enabling SG bit for the vap ath1 features 4000 [ 39.090000] Enabling TSO bit for the vap ath1 features 4000 [ 39.090000] Enabling LRO bit for the vap ath1 features 4000 [ 39.100000] VAP device ath1 created osifp: (85352b80) os_if: (84420000) [ 39.230000] [wifi1] FWLOG: [9279] WAL_DBGID_DEV_RESET ( 0xc01d, 0x47b ) [ 39.330000] siwfreq [ 39.330000] Set freq vap 0 stop send + 84420000 [ 39.330000] Set freq vap 0 stop send -84420000 [ 39.370000] Set wait done --84420000 [ 39.430000] siwfreq [ 39.430000] Set freq vap 0 stop send + 84420000 [ 39.440000] Set freq vap 0 stop send -84420000 [ 39.470000] Set wait done --84420000 ...cat done... [ 39.590000] WARNING: Fragmentation with HT mode NOT ALLOWED!! [ 39.620000] siwfreq [ 39.620000] Set freq vap 0 stop send + 84420000 [ 39.630000] Set freq vap 0 stop send -84420000 [ 39.660000] Set wait done --84420000 [ 39.760000] ME Pool succesfully initialized vaddr - 84440000 paddr - 0 [ 39.760000] num_elems = 1424 buf_size - 64 pool_size = 102528 [ 39.770000] Enable MCAST_TO_UCAST [ 39.890000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 [ 39.910000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 [ 39.920000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 [ 40.030000] Setting Max Stations:64 [ 40.060000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 [ 40.070000] su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 [ 40.090000] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 [ 40.110000] [DEBUG] vap-0(ath1):set SIOC80211NWID, 15 characters [ 40.120000] [ 40.120000] DES SSID SET=TP-Link_A71C_5G [ 40.230000] [wifi1] FWLOG: [10813] vap-0 WMI_CMD_PARAMS ( 0xff, 0x40, 0x1 ) [ 40.640000] ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 [ 40.640000] DEVICE IS DOWN ifname=ath1 [ 40.650000] DEVICE IS DOWN ifname=ath1 [ 40.660000] Switching to Tx Mode-0 [ 41.070000] Sending SCAN START cmd [ 41.070000] 8021q: adding VLAN 0 to HW filter on device ath1 [ 41.230000] [wifi1] FWLOG: [12075] WAL_DBGID_SECURITY_ENCR_EN ( ) [ 41.240000] [wifi1] FWLOG: [12075] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) [ 41.240000] [wifi1] FWLOG: [12118] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 41.720000] device ath0 entered promiscuous mode [ 41.730000] br-lan: port 2(ath0) entered forwarding state [ 41.730000] br-lan: port 2(ath0) entered forwarding state [ 41.770000] device ath1 entered promiscuous mode [ 41.780000] br-lan: port 3(ath1) entered forwarding state [ 41.780000] br-lan: port 3(ath1) entered forwarding state [ 42.230000] [wifi1] FWLOG: [12433] WAL channel change freq=5200, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 42.240000] [wifi1] FWLOG: [12748] WAL channel change freq=5220, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 42.250000] [wifi1] FWLOG: [13062] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 42.300000] send_vdev_down_cmd_non_tlv for vap 0 [ 42.310000] OL vap_start + [ 42.310000] VDEV START [ 42.310000] OL vap_start - [ 42.310000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 [ 42.480000] device eth0 left promiscuous mode [ 42.490000] br-lan: port 1(eth0) entered disabled state [ 42.500000] ol_vdev_start_resp_ev for vap 0 (pK-error) [ 42.500000] send_wmm_update_cmd_non_tlv: [ 42.510000] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 [ 42.510000] send_vdev_up_cmd_non_tlv for vap 0 [ 42.520000] Beacon mode set to staggered. Cannot enable FD [ 42.520000] __ieee80211_smart_ant_init: Smart Antenna is not supported [ 42.540000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.540000] del ct event: 2 dev_name: br-lan [ 42.550000] start clean up ct iterate.. [NM_Error](nm_lib_readPtnUsedSize) 00556: partition not written [NM_Error](nvrammanager_readPtnFromNvram) 00287: partition is empty [ 42.580000] @@@@@@ add br-lan!!! [ 42.580000] device eth0 entered promiscuous mode [ 42.610000] [ changeLanIp ] 1692: changeLanIp to 0xc0a800fe [ 42.610000] [ 42.730000] ADDRCONF(NETDEV_UP): eth0: link is not ready [smartip_start_process 525] smartipd start dnsmasq........... [NM_Error](nm_lib_readPtnUsedSize) 00556: partition not written [NM_Error](nvrammanager_readPtnFromNvram) 00287: partition is empty [ 43.240000] [wifi1] FWLOG: [13381] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) [ 43.240000] [wifi1] FWLOG: [13381] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) [ 43.250000] [wifi1] FWLOG: [13386] vap-0 VDEV_MGR_VDEV_START ( 0x1478, 0x2, 0x0, 0x0 ) [ 43.260000] [wifi1] FWLOG: [13387] WAL channel change freq=5240, mode=10 flags=0 rx_ok=1 tx_ok=1 [ 43.270000] [wifi1] FWLOG: [13577] VDEV_MGR_VDEV_START_RESP ( 0x0 ) [ 43.270000] [wifi1] FWLOG: [13599] VDEV_MGR_HP_START_TIME ( 0x0, 0x1478, 0x4b0001 ) [ 43.280000] [wifi1] FWLOG: [13599] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 ) [ 43.290000] [wifi1] FWLOG: [13599] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) [ 43.290000] [wifi1] FWLOG: [13599] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x1478, 0x0, 0x0 ) [DEBUG] dnsmasq flock before [DEBUG]: Read config file lines: # auto-generated config file from /etc/config/dhcp [DEBUG]: Read config file lines: conf-file=/etc/dnsmasq.conf [DEBUG]: Read config file lines: # Change the following lines if you want dnsmasq to serve SRV [DEBUG]: Read config file lines: # records. [DEBUG]: Read config file lines: # You may add multiple srv-host lines. [DEBUG]: Read config file lines: # The fields are <name>,<target>,<port>,<priority>,<weight> [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: # A SRV record sending LDAP for the example.com domain to [DEBUG]: Read config file lines: # ldapserver.example.com port 289 [DEBUG]: Read config file lines: #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: # Two SRV records for LDAP, each with different priorities [DEBUG]: Read config file lines: #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 [DEBUG]: Read config file lines: #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: # A SRV record indicating that there is no LDAP server for the domain [DEBUG]: Read config file lines: # example.com [DEBUG]: Read config file lines: #srv-host=_ldap._tcp.example.com [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: # The following line shows how to make dnsmasq serve an arbitrary PTR [DEBUG]: Read config file lines: # record. This is useful for DNS-SD. [DEBUG]: Read config file lines: # The fields are <name>,<target> [DEBUG]: Read config file lines: #ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services" [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: # Change the following lines to enable dnsmasq to serve TXT records. [DEBUG]: Read config file lines: # These are used for things like SPF and zeroconf. [DEBUG]: Read config file lines: # The fields are <name>,<text>,<text>... [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: #Example SPF. [DEBUG]: Read config file lines: #txt-record=example.com,"v=spf1 a -all" [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: #Example zeroconf [DEBUG]: Read config file lines: #txt-record=_http._tcp.example.com,name=value,paper=A4 [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: # Provide an alias for a "local" DNS name. Note that this _only_ works [DEBUG]: Read config file lines: # for targets which are names from DHCP or /etc/hosts. Give host [DEBUG]: Read config file lines: # "bert" another name, bertrand [DEBUG]: Read config file lines: # The fields are <cname>,<target> [DEBUG]: Read config file lines: #cname=bertand,bert [DEBUG]: Read config file lines: cname=tplinklogin.net,tplinkap.net [DEBUG]: Read config file lines: dhcp-authoritative [DEBUG]: Read config file lines: domain-needed [DEBUG]: Read config file lines: localise-queries [DEBUG]: Read config file lines: read-ethers [DEBUG]: Read config file lines: bogus-priv [DEBUG]: Read config file lines: expand-hosts [DEBUG]: Read config file lines: server=/lan/ [DEBUG]: Read config file lines: dhcp-leasefile=/tmp/dhcp.leases [DEBUG]: Read config file lines: resolv-file=/tmp/resolv.conf.auto [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: dhcp-range=lan,192.168.0.100,192.168.0.199,255.255.255.0,1m [DEBUG]: Read config file lines: dhcp-option=lan,3,192.168.0.254 [DEBUG]: Read config file lines: dhcp-option=lan,6,0.0.0.0,0.0.0.0 [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: [DEBUG]: Read config file lines: address=/TL-WA1201v2/192.168.0.254 [DEBUG]: Read config file lines: ptr-record=254.0.168.192.in-addr.arpa,TL-WA1201v2 [DEBUG] dnsmasq flock end [ 45.400000] ieee80211_ioctl_kickmac[10815] [ 45.420000] ieee80211_ioctl_kickmac[10815] [ 45.890000] eth0: link up (1000Mbps/Full duplex) [ 45.890000] br-lan: port 1(eth0) entered forwarding state [ 45.900000] br-lan: port 1(eth0) entered forwarding state [ 45.900000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready hotplug ifup lan, then restart wifidog [ 50.920000] tp_domain: ap mode [ 50.950000] Lan Domain: tplinklogin.net [ 50.960000] Lan Domain: www.tplinklogin.net [ 51.890000] br-lan: port 1(eth0) entered disabled state [ 52.000000] eth0: link down [smartip_create_ibus_thread 41] create ibus thread successfully [smartip_start_process 530] smartipd start udhcpc.......... [smartip_ibus_handle_dhcp_event 1702] smartip: udhcpc detect no dhcp server BusyBox v1.19.4 (2020-07-09 17:34:11 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. MM NM MMMMMMM M M $MMMMM MMMMM MMMMMMMMMMM MMM MMM MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM' MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM MMMMMM MMMMN M MMMMMMMMM MMMM MMMM MMMM M MMMMMMM M M M --------------------------------------------------------------- For those about to rock... (%C, %R) --------------------------------------------------------------- root@TL-WA1201v2:/#


COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Space for additional notes, links to forum threads or other resources.

  • ...
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1