Show pagesourceOld revisionsBacklinksBack to top × Boot log (Factory V2.0) U-Boot 1.1.4 (Feb 20 2012 - 19:08:47) AP121 (ar9330) U-boot DRAM: 32 MB led turning on for 1s... id read 0x100000ff flash size 4194304, sector count = 64 Flash: 4 MB Using default environment In: serial Out: serial Err: serial Net: ag7240_enet_initialize... No valid address in Flash. Using fixed address No valid address in Flash. Using fixed address : cfg1 0x5 cfg2 0x7114 eth0: 00:03:7f:09:0b:ad ag7240_phy_setup eth0 up : cfg1 0xf cfg2 0x7214 eth1: 00:03:7f:09:0b:ad athrs26_reg_init_lan ATHRS26: resetting s26 ATHRS26: s26 reset done ag7240_phy_setup eth1 up eth0, eth1 Autobooting in 1 seconds ## Booting image at 9f020000 ... Uncompressing Kernel Image ... OK Starting kernel ... Booting AR9330(Hornet)... Linux version 2.6.31--LSDK-9.2.0.312 (root@localhost.localdomain) (gcc version 4.3.3 (GCC) ) #159 Mon Feb 20 19:09:01 CST 2012 flash_size passed from bootloader = 4 CPU revision is: 00019374 (MIPS 24Kc) Determined physical RAM map: memory: 02000000 @ 00000000 (usable) User-defined physical RAM map: memory: 02000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00002000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00002000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:128k(u-boot),1024k(kernel),2816(rootfs),64k(config),64k(ART) mem=32M PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=00000000 Readback ErrCtl register=00000000 Memory: 29876k/32768k available (1884k kernel code, 2892k reserved, 521k data, 116k init, 0k highmem) Hierarchical RCU implementation. NR_IRQS:128 plat_time_init: plat time init done Calibrating delay loop... 266.24 BogoMIPS (lpj=532480) Mount-cache hash table entries: 512 NET: Registered protocol family 16 ===== ar7240_platform_init: 0 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered NET: Registered protocol family 1 AR7240 GPIOC major 0 squashfs: version 4.0 (2009/01/31) Phillip Lougher NTFS driver 2.1.29 [Flags: R/O]. msgmni has been set to 58 alg: No test for lzma (lzma-generic) alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled ttyS0: detected caps 00000000 should be 00000100 serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A console [ttyS0] enabled PPP generic driver version 2.4.2 NET: Registered protocol family 24 cmdlinepart partition parsing not available set partition boot set partition kernel set partition rootfs set partition config set partition art set partition � Searching for RedBoot partition table 5 RedBoot partitions found on MTD device ar7240-nor0 Creating 5 MTD partitions on "ar7240-nor0": 0x000000000000-0x000000020000 : "boot" 0x000000020000-0x000000120000 : "kernel" 0x000000120000-0x0000003e0000 : "rootfs" 0x0000003e0000-0x0000003f0000 : "config" 0x0000003f0000-0x000000400000 : "art" ->Oops: flash id 0x10215 . ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Port Status 1c000004 ar7240-ehci ar7240-ehci.0: ATH EHCI ar7240-ehci ar7240-ehci.0: new USB bus registered, assigned bus number 1 ehci_reset Intialize USB CONTROLLER in host mode: 3 ehci_reset Port Status 1c000000 ar7240-ehci ar7240-ehci.0: irq 3, io mem 0x1b000000 ehci_reset Intialize USB CONTROLLER in host mode: 3 ehci_reset Port Status 1c000000 ar7240-ehci ar7240-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected TCP cubic registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> ar7240wdt_init: Registering WDT success VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing unused kernel memory: 116k freed init started: BusyBox v1.01 (2012.01.16-03:21+0000) multi-call binary This Board use 2.6.31 xt_time: kernel timezone is -0000 nf_conntrack version 0.5.0 (512 buckets, 5120 max) ip_tables: (C) 2000-2006 Netfilter Core Team insmod: cannot open module `/lib/modules/2.6.31/kernel/iptable_raw.ko': No such file or directory insmod: cannot open module `/lib/modules/2.6.31/kernel/flashid.ko': No such file or directory PPPoL2TP kernel driver, V1.0 PPTP driver version 0.8.3 insmod: cannot open module `/lib/modules/2.6.31/kernel/harmony.ko': No such file or directory Now flash open! (none) mips #159 Mon Feb 20 19:09:01 CST 2012 (none) (none) login: Now flash open! ATHR_GMAC: Length per segment 1536 ATHR_GMAC: fifo cfg 3 01f00140 ATHR_GMAC: Mac address for unit 1:bf1f0006 ATHR_GMAC: 47:84:1f:9d:dc:29 ATHR_GMAC: Max segments per packet : 1 ATHR_GMAC: Max tx descriptor count : 40 ATHR_GMAC: Max rx descriptor count : 96 ATHR_GMAC: Mac capability flags : 4D83 ATHR_GMAC: Mac address for unit 0:bf1f0000 ATHR_GMAC: 75:2f:e7:e9:20:96 ATHR_GMAC: Max segments per packet : 1 ATHR_GMAC: Max tx descriptor count : 40 ATHR_GMAC: Max rx descriptor count : 252 ATHR_GMAC: Mac capability flags : 4403 athr_gmac_ring_alloc Allocated 640 at 0x81ea6800 athr_gmac_ring_alloc Allocated 4032 at 0x81d63000 Setting Drop CRC Errors, Pause Frames and Length Error frames Setting PHY...mac 0 athr_gmac_ring_alloc Allocated 640 at 0x81ea6400 athr_gmac_ring_alloc Allocated 1536 at 0x81f2b000 athr_gmac_mii_setup: MDC check failed Setting Drop CRC Errors, Pause Frames and Length Error frames ATHRS26: resetting s26 ATHRS26: s26 reset done Setting PHY...mac 1 device eth0 entered promiscuous mode Now flash open! nf_conntrack_rtsp v0.6.21 loading nf_nat_rtsp v0.6.21 loading asf: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint ath_hal: 0.9.17.1 (AR9380, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D) ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved ath_ahb: 9.2.0_U5.508 (Atheros/multi-bss) Boostrap clock 25MHz ar9300RadioAttach: Need analog access recipe!! Restoring Cal data from Flash ath_get_caps[4735] rx chainmask mismatch actual 1 sc_chainmak 0 ath_get_caps[4710] tx chainmask mismatch actual 1 sc_chainmak 0 wifi0: Atheros 9380: mem=0xb8100000, irq=2 wlan_vap_create : enter. devhandle=0x80c942c0, opmode=IEEE80211_M_HOSTAP, flags=0x1 wlan_vap_create : exit. devhandle=0x80c942c0, opmode=IEEE80211_M_HOSTAP, flags=0x1. VAP device ath0 created DES SSID SET=TP-LINK_E95CF0 ieee80211_scan_unregister_event_handler: Failed to unregister evhandler=c0aeb840 arg=81f9cac0 wlan_vap_delete : enter. vaphandle=0x80e6c000 wlan_vap_delete : exit. vaphandle=0x80e6c000 wlan_vap_create : enter. devhandle=0x80c942c0, opmode=IEEE80211_M_HOSTAP, flags=0x1 wlan_vap_create : exit. devhandle=0x80c942c0, opmode=IEEE80211_M_HOSTAP, flags=0x1. VAP device ath0 created DES SSID SET=TP-LINK_E95CF0 ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1 WARNING: Fragmentation with HT mode NOT ALLOWED!! device ath0 entered promiscuous mode br0: port 2(ath0) entering forwarding state ieee80211_ioctl_siwmode: imr.ifm_active=1442432, new mode=3, valid=1 br0: port 2(ath0) entering disabled state DES SSID SET=TP-LINK_E95CF0 br0: port 2(ath0) entering forwarding state This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.OKMore information about cookies Last modified: 2013/10/01 07:38by jow