This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision |
| toh:tp-link:td-w8960n [2019/08/02 15:50] – link to TD-W8960Nv5 devicepage added tmomas | toh:tp-link:td-w8960n [2021/09/07 19:50] – [Installation] ordered list item level corrected tmomas |
|---|
| OEM source code available at: [[http://www.tp-link.com/resources/GPL/TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz|TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz]] | OEM source code available at: [[http://www.tp-link.com/resources/GPL/TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz|TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz]] |
| |
| For TD-W8960N **v5** see [[toh:tp-link:tp-link_td-w8960n_v5|TP-Link TD-W8960N v5]] and [[toh:plusnet:fast2704nv1|Plusnet 2704N V1]] | For TD-W8960N **v5** see [[toh:tp-link:td-w8960n_v5|TP-Link TD-W8960N v5]] and [[toh:plusnet:fast2704nv1|Plusnet 2704N V1]] |
| |
| |
| - Use a tftp **CLIENT** to upload the image //(for example tftpd32.exe on windows)// | - Use a tftp **CLIENT** to upload the image //(for example tftpd32.exe on windows)// |
| - Give your PC a static IP and telnet the router | - Give your PC a static IP and telnet the router |
| - Use the command: <code>tftp -g -t i -f openwrt-cfe.bin 192.168.1.100</code> | - Use the command: <code>tftp -g -t i -f openwrt-cfe.bin 192.168.1.100</code> \\ Where "openwrt-cfe.bin" is the filename and "192.168.1.100" is the IP of the PC where to get the file from tftp server (Thanks to [[https://forum.lede-project.org/u/mbo2o|mbo2o @ LEDE Forum]] for the firmware upload instructions) |
| - Where "openwrt-cfe.bin" is the filename and "192.168.1.100" is the IP of the PC where to get the file from tftp server (Thanks to [[https://forum.lede-project.org/u/mbo2o|mbo2o @ LEDE Forum]] for the firmware upload instructions) | |
| - Wait for it to flash, router will reboot automatically<del> and enter in recovery mode</del> | - Wait for it to flash, router will reboot automatically<del> and enter in recovery mode</del> |
| - <del>Go to http://192.168.1.1 and reflash the openwrt-96358VW2-generic-squashfs-cfe.bin image</del> | - <del>Go to http://192.168.1.1 and reflash the openwrt-96358VW2-generic-squashfs-cfe.bin image</del> |