Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:tp-link:td-w8960n [2018/06/02 09:44] – Section JTAG added; section Serial cleaned up tmomastoh:tp-link:td-w8960n [2021/09/07 19:50] – [Installation] ordered list item level corrected tmomas
Line 6: Line 6:
 OEM source code available at: [[http://www.tp-link.com/resources/GPL/TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz|TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz]] OEM source code available at: [[http://www.tp-link.com/resources/GPL/TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz|TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz]]
  
-For TD-W8960N **v5** see [[toh:plusnet:fast2704nv1|Plusnet 2704N V1]]+For TD-W8960N **v5** see [[toh:tp-link:td-w8960n_v5|TP-Link TD-W8960N v5]] and [[toh:plusnet:fast2704nv1|Plusnet 2704N V1]]
  
  
Line 55: Line 55:
   - Use a tftp **CLIENT** to upload the image //(for example tftpd32.exe on windows)//   - Use a tftp **CLIENT** to upload the image //(for example tftpd32.exe on windows)//
   - Give your PC a static IP and telnet the router   - Give your PC a static IP and telnet the router
-  - Use the command: <code>tftp -g -t i -f openwrt-cfe.bin 192.168.1.100</code> +  - Use the command: <code>tftp -g -t i -f openwrt-cfe.bin 192.168.1.100</code> \\ Where "openwrt-cfe.bin" is the filename and "192.168.1.100" is the IP of the PC where to get the file from tftp server (Thanks to [[https://forum.lede-project.org/u/mbo2o|mbo2o @ LEDE Forum]] for the firmware upload instructions)
-  - Where "openwrt-cfe.bin" is the filename and "192.168.1.100" is the IP of the PC where to get the file from tftp server (Thanks to [[https://forum.lede-project.org/u/mbo2o|mbo2o @ LEDE Forum]] for the firmware upload instructions)+
   - Wait for it to flash, router will reboot automatically<del> and enter in recovery mode</del>   - Wait for it to flash, router will reboot automatically<del> and enter in recovery mode</del>
   - <del>Go to http://192.168.1.1 and reflash the openwrt-96358VW2-generic-squashfs-cfe.bin image</del>   - <del>Go to http://192.168.1.1 and reflash the openwrt-96358VW2-generic-squashfs-cfe.bin image</del>
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1