Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:tp-link:td-w8960n [2018/05/21 20:49] – Datatables added, cleanup tmomastoh:tp-link:td-w8960n [2021/09/07 19:50] – [Installation] ordered list item level corrected tmomas
Line 6: Line 6:
 OEM source code available at: [[http://www.tp-link.com/resources/GPL/TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz|TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz]] OEM source code available at: [[http://www.tp-link.com/resources/GPL/TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz|TD-W8960Nv1.0_RELEASE_GPL_CODE.tar.gz]]
  
-For TD-W8960N **v5** see [[toh:plusnet:fast2704nv1|Plusnet 2704N V1]]+For TD-W8960N **v5** see [[toh:tp-link:td-w8960n_v5|TP-Link TD-W8960N v5]] and [[toh:plusnet:fast2704nv1|Plusnet 2704N V1]]
  
  
Line 19: Line 19:
  
 ---- datatable ---- ---- datatable ----
-cols    : Unsupported Functions_unsupporteds+cols    : Version, Unsupported Functions_unsupporteds
 filter  : Model=TD-W8960N filter  : Model=TD-W8960N
 filter  : Version!=v5 filter  : Version!=v5
Line 55: Line 55:
   - Use a tftp **CLIENT** to upload the image //(for example tftpd32.exe on windows)//   - Use a tftp **CLIENT** to upload the image //(for example tftpd32.exe on windows)//
   - Give your PC a static IP and telnet the router   - Give your PC a static IP and telnet the router
-  - Use the command: <code>tftp -g -t i -f openwrt-cfe.bin 192.168.1.100</code> +  - Use the command: <code>tftp -g -t i -f openwrt-cfe.bin 192.168.1.100</code> \\ Where "openwrt-cfe.bin" is the filename and "192.168.1.100" is the IP of the PC where to get the file from tftp server (Thanks to [[https://forum.lede-project.org/u/mbo2o|mbo2o @ LEDE Forum]] for the firmware upload instructions)
-  - Where "openwrt-cfe.bin" is the filename and "192.168.1.100" is the IP of the PC where to get the file from tftp server (Thanks to [[https://forum.lede-project.org/u/mbo2o|mbo2o @ LEDE Forum]] for the firmware upload instructions)+
   - Wait for it to flash, router will reboot automatically<del> and enter in recovery mode</del>   - Wait for it to flash, router will reboot automatically<del> and enter in recovery mode</del>
   - <del>Go to http://192.168.1.1 and reflash the openwrt-96358VW2-generic-squashfs-cfe.bin image</del>   - <del>Go to http://192.168.1.1 and reflash the openwrt-96358VW2-generic-squashfs-cfe.bin image</del>
Line 90: Line 89:
 ^ RAM size    | 32 MiB                                   | ^ RAM size    | 32 MiB                                   |
 ^ Wireless    | Broadcom BCM4351 802.11b/g/n (onboard)   | ^ Wireless    | Broadcom BCM4351 802.11b/g/n (onboard)   |
-^ Ethernet    | Broadcom  {{:media:datasheets:bcm5325_pinout.png?linkonly|BCM5325}} w/ vlan support [[doc:uci:network#swconfig]] |+^ Ethernet    | Broadcom  {{:media:datasheets:bcm5325_pinout.png?linkonly|BCM5325}} w/ vlan support [[docs:techref:swconfig]] |
 ^ Internet    | ADSL2+   | ^ Internet    | ADSL2+   |
 ^ USB         | no       | ^ USB         | no       |
Line 108: Line 107:
  
 ==== Serial ==== ==== Serial ====
--> [[docs:techref:hardware:port.serial]]  +-> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. 
-Pin: TX,RX,GND,VCC (3.3v)\\ + 
-Speed: 115200 8N1+{{media:tplink:td-w8960:td-w8960n_rs232_ttl.jpg}} 
 + 
 +Pin: TX,RX,GND,VCC (3.3v)
  
 **Don't connect VCC!** Just use TX,RX and GND and then power on the device.\\ **Don't connect VCC!** Just use TX,RX and GND and then power on the device.\\
Line 116: Line 117:
 Don't forget that RX connects to the RS232TTL-TX and TX to the RS232TTL-RX!\\ Don't forget that RX connects to the RS232TTL-TX and TX to the RS232TTL-RX!\\
  
-{{media:tplink:td-w8960:td-w8960n_rs232_ttl.jpg}}+^ Serial connection parameters\\ for TP-Link TD-W8960N | 115200, 8N1 | 
 + 
 +==== JTAG ==== 
 +-> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
  
 +How to connect to the JTAG Port of this specific device:\\
 +**Insert photo of PCB with markings for JTAG port**
  
 ===== Hardware mods ===== ===== Hardware mods =====
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1