Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:tp-link:re205 [2024/03/25 21:34] – Created from the form at meta:create_new_device_page slo2toh:tp-link:re205 [2024/03/28 17:46] – [OEM bootlog] slo2
Line 34: Line 34:
  
 ===== Supported Versions ===== ===== Supported Versions =====
- 
-<WRAP BOX> 
-FIXME 
-  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If the tables below show information for ''<nowiki>TP-Link RE205 </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables below contain "Nothing found", it means that either 
-    - the dataentry page for TP-Link RE205  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
- 
 <!-- ToH: { <!-- ToH: {
   "source": "json",   "source": "json",
   "dom": "t",   "dom": "t",
   "paging": false,   "paging": false,
-  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"], +  "rotate": true, 
-  "filterColumns": {"brand": "^TP-Link$", "model": "^RE205$", "version": "^@@Version\\|@@$"}+  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "owrt_forum_topic_url", "deviceid"], 
 +  "filterColumns": {"model": "^RE205$"}
 } --> } -->
- 
-/* If no unsupported functions known, comment out the following datatable or delete it. */ 
-<!-- ToH: { 
-  "source": "json", 
-  "dom": "t", 
-  "paging": false, 
-  "shownColumns": ["unsupported_functions"], 
-  "filterColumns": {"brand": "^TP-Link$", "model": "^RE205$", "version": "^@@Version\\|@@$"} 
-} --> 
- 
 ===== Experimental Versions ===== ===== Experimental Versions =====
  
Line 78: Line 58:
   "dom": "t",   "dom": "t",
   "paging": false,   "paging": false,
-  "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"], +  "rotate": true, 
-  "filterColumns": {"brand": "^TP-Link$", "model": "^RE205$", "version": "^@@Version\\|@@$"}+  "shownColumns": ["model", "version", "cpu", "cpumhz", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports"], 
 +  "filterColumns": {"model": "^RE205$"}
 } --> } -->
 +
  
  
Line 90: Line 72:
   "dom": "t",   "dom": "t",
   "paging": false,   "paging": false,
 +  "rotate": true,
   "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],   "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],
-  "filterColumns": {"brand": "^TP-Link$", "model": "^RE205$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"model": "^RE205$"}
 } --> } -->
 */ */
- 
  
 /* snapshot */ /* snapshot */
 /* delete once stable release is available */ /* delete once stable release is available */
 +As of now only snapshot are available for RE205 V3 devices. Please read [[:releases:snapshot]] before installing.
 +
 <!-- ToH: { <!-- ToH: {
   "source": "json",   "source": "json",
   "dom": "t",   "dom": "t",
   "paging": false,   "paging": false,
 +  "rotate": true,
   "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"],   "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"],
-  "filterColumns": {"brand": "^TP-Link$", "model": "^RE205$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"model": "^RE205$"}
 } --> } -->
- 
  
 -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
- 
-FIXME Please add the installation procedure here. 
  
 ==== Flash Layout ==== ==== Flash Layout ====
Line 120: Line 102:
 ==== OEM easy installation ==== ==== OEM easy installation ====
  
-<WRAP BOX> +  Simply install the -factory.bin image via the stock web interface.
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ +
-**//Remove / modify them if they do not apply to this particular device!//** +
- +
-This section deals with +
-  * How you install OpenWrt from a device freshly opened +
-  * The steps required such as reset to factory defaults if the device has already been configured +
- +
-**Note:** Reset router to factory defaults if it has been previously configured. +
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +
-  * Upload .bin file to router+
   * Wait for it to reboot   * Wait for it to reboot
   * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed.   * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed.
-</WRAP> 
  
 ==== OEM installation using the TFTP method ==== ==== OEM installation using the TFTP method ====
Line 156: Line 127:
 ===== Upgrading OpenWrt ===== ===== Upgrading OpenWrt =====
 ->  [[docs:guide-user:installation:generic.sysupgrade]] ->  [[docs:guide-user:installation:generic.sysupgrade]]
- 
-<WRAP BOX> 
- 
-FIXME These are generic instructions. Update with your router's specifics. 
- 
-==== LuCI Web Upgrade Process ==== 
- 
-  * Browse to ''<nowiki>http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/</nowiki>'' LuCI Upgrade URL 
-  * Upload image file for sysupgrade to LuCI 
-  * Wait for reboot 
- 
-==== Terminal Upgrade Process ==== 
- 
-If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. 
-There are two command line methods for upgrading: 
- 
-  * ''sysupgrade'' 
-  * ''mtd'' 
- 
-Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. 
- 
-=== sysupgrade === 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-sysupgrade /tmp/xxx.abc 
-</code> 
- 
-=== mtd === 
- 
-If ''sysupgrade'' does not support this router, use ''mtd''. 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-mtd write /tmp/xxx.abc linux && reboot 
-</code> 
- 
-</WRAP> 
- 
 ===== Debricking ===== ===== Debricking =====
 -> [[docs:guide-user:troubleshooting:generic.debrick]] -> [[docs:guide-user:troubleshooting:generic.debrick]]
Line 226: Line 152:
 </WRAP> </WRAP>
  
-==== Switch Ports (for VLANs) ==== 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
-Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. 
-^ Port             ^ Switch port   ^ 
-| Internet (WAN)   | EXAMPLE 4     | 
-| LAN 1            | EXAMPLE 3     | 
-| LAN 2            | EXAMPLE 2     | 
-| LAN 3            | EXAMPLE 1     | 
-| LAN 4            | EXAMPLE 0     | 
- 
-</WRAP> 
  
 ==== Buttons ==== ==== Buttons ====
Line 330: Line 243:
 ===== Bootlogs ===== ===== Bootlogs =====
 ==== OEM bootlog ==== ==== OEM bootlog ====
-<WRAP bootlog> 
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki> 
-</WRAP>\\ 
  
 +=== U-Boot 1.1.3 / Ralink UBoot Version: 5.0.0.0 ===
 +This bootloader version seems to be locked and does not react on any input.
 +
 +<code>
 +cid reg:00010102, cid:1[04010D07][04010D0A]
 +DDR Calibration DQS reg = 00008988
 +
 +DDR Calibration MEMCTRL reg = 0E120003
 +
 +
 +U-Boot 1.1.3 (Nov 28 2020 - 10:44:01)
 +
 +Board: Ralink APSoC DRAM:  64 MB
 +relocate_code Pointer at: 83fb8000
 +flash manufacture id: 20, device id 70 17
 +Warning: un-recognized chip ID, please update bootloader!
 +*** Warning - bad CRC, using default environment
 +
 +============================================
 +Ralink UBoot Version: 5.0.0.0
 +--------------------------------------------
 +ASIC 7628_MP (Port5<->None)
 +DRAM component: 512 Mbits DDR, width 16
 +DRAM bus: 16 bit
 +Total memory: 64 MBytes
 +Flash component: SPI Flash
 +Date:Nov 28 2020  Time:10:44:01
 +============================================
 +icache: sets:512, ways:4, linesz:32 ,total:65536
 +dcache: sets:256, ways:4, linesz:32 ,total:32768
 +
 + ##### The CPU freq = 580 MHZ ####
 + estimate memory size =64 Mbytes
 +RESET MT7628 PHY!!!!!!
 +
 +Please choose the operation:
 +   1: Load system code to SDRAM via TFTP.
 +   2: Load system code then write to Flash via TFTP.
 +   3: Boot system code via Flash (default).
 +   4: Entr boot command line interface.
 +   7: Load Boot Loader code then write to Flash via Serial.
 +   9: Load Boot Loader code then write to Flash via TFTP.
 +default: 3
 +
 +You choosed 3
 +                                                                              0
 +
 +3: System Boot system code via Flash.
 +tplink_turn_off_led
 +## Booting image at bc020000 ...
 +text base: 80000000
 +entry point: 8000c150
 +   Uncompressing Kernel Image ... OK
 +No initrd
 +## Transferring control to Linux (at address 8000c150) ...
 +## Giving linux memsize in MB, 64
 +
 +Starting kernel ...
 +</code>\\
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
  • Last modified: 2024/12/18 14:54
  • by frollic