Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
toh:tp-link:re200 [2020/11/18 05:02] – [Web Interface Method (v1)] Link to GUI tool ferenctoh:tp-link:re200 [2024/09/20 22:23] (current) – Add notes to flash OpenWrt on official Web UI for v3 ivzhh
Line 2: Line 2:
  
 The [[toh:tp-link:start|TP-Link]] RE200 is a wall-pluggable dual-band wireless range extender (802.11b/g/n and 802.11a/n/ac) based on the MediaTek SoCs with an Ethernet port. The RE200v1 is based on a MT7620A SoC, while the RE200v2, RE200v3 and RE200v4 are based on a MT7628A SoC. The [[toh:tp-link:start|TP-Link]] RE200 is a wall-pluggable dual-band wireless range extender (802.11b/g/n and 802.11a/n/ac) based on the MediaTek SoCs with an Ethernet port. The RE200v1 is based on a MT7620A SoC, while the RE200v2, RE200v3 and RE200v4 are based on a MT7628A SoC.
 +
 +<WRAP round important>
 +**The latest RE200 v5 is not supported by OpenWrt! The device only has 4MB of flash and runs VxWorks by default.**
 +</WRAP>
 +
 +<WRAP round important>
 +The latest OpenWrt release (23.05.3, 23.05.4 and 22.03.7) are broken on the RE200v1! \\
 +**Do not flash these images, you will brick your device!**
 +</WRAP>
  
 ===== Supported Versions ===== ===== Supported Versions =====
----- datatable ---- +<!-- ToH: { 
-cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid +  "source": "json", 
-headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data +  "dom": "t", 
-align   : c,c,c,c,c,c,c +  "paging": false, 
-filter  : Model=RE200 +  "rotate": true, 
-----+  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "owrt_forum_topic_url", "deviceid"], 
 +  "filterColumns": {"model": "^RE200$"} 
 +} -->
  
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
----- datatable ---- +<!-- ToH: { 
-cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ +  "source": "json", 
-header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB +  "dom": "t", 
-align   : c,c,c,c,c,c,c,c,c,c,c,c,c +  "paging": false, 
-filter  : Model=RE200 +  "rotate": true, 
-----+  "shownColumns": ["model", "version", "cpu", "cpumhz", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"], 
 +  "filterColumns": {"model": "^RE200$"} 
 +} -->
  
  
 ===== Installation ===== ===== Installation =====
  
-/* **Release** */ +<!-- ToH: { 
-/* uncomment when release is available; at the same time, remove the snapshot datatables below */ +  "source": "json", 
-/* +  "dom": "t", 
----- datatable ---- +  "paging": false, 
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url +  "rotate": true, 
-headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock +  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"], 
-align   : c,c,c +  "filterColumns": {"model": "^RE200$"} 
-filter  : Model=RE200 +} -->
----- +
-*/ +
- +
----- datatable ---- +
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt snapshot Install URL_url, Firmware OpenWrt snapshot Upgrade URL_url, Firmware OEM Stock URL_url +
-headers : Model, Version, Current Release, Firmware OpenWrt snapshot Install, Firmware OpenWrt snapshot Upgrade, Firmware OEM Stock +
-align   : c,c,c +
-filter  : Model=RE200 +
-----+
  
 -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
  
 +Note that the time for an initial flash is very long for these devices. Users should expect 20 minutes before being able to access it, V4 can be 10 minutes, V1 is slower. Further sysupgrades may be a little faster at around 8 minutes.
 ==== Web Interface Method (v1) ==== ==== Web Interface Method (v1) ====
 +
 +<WRAP round important>
 +The latest OpenWrt release (23.05.3, 23.05.4 and 22.03.7) are broken on the RE200v1! \\
 +**Do not flash these images, you will brick your device!**
 +</WRAP>
  
 It is possible to install OpenWrt via the TP-Link web interface, but you need to prepare the image first. It is possible to install OpenWrt via the TP-Link web interface, but you need to prepare the image first.
Line 64: Line 74:
 ==== Web Interface Method (v2, v3, v4) ==== ==== Web Interface Method (v2, v3, v4) ====
  
-Simply install the -factory.bin image via the stock web interface. This procedure does not overwrite U-Boot, hence you have higher chances of being able to recover from a bad flash.+Simply install the -factory.bin image via the stock web interface. This procedure does not overwrite U-Boot, hence you have higher chances of being able to recover from a bad flash. (note: for v3 running TP-Link firmware > 1.1.0, Web UI rejects OpenWrt factory bin. You need to [[https://forum.openwrt.org/t/tp-link-re200-v3-refuses-to-install-openwrt/108388/8?u=ivzhh|downgrade to 1.1.0 first]]. The TP-Link US website doesn't have the 1.1.0 firmware link, you need to stay on the EU site and download the 2019 version)
  
 ==== Serial (v1 and v2) ==== ==== Serial (v1 and v2) ====
Line 75: Line 85:
  
  
-===== Back to Stock (v1) =====+===== Back to Stock ===== 
 + 
 +==== Back to Stock (v1) ====
  
 Download an OEM firmware from TP-Link and prepare it as follows (we need to strip the first 0x200 bytes TP-Link header and the next 0x20000 bytes U-Boot): Download an OEM firmware from TP-Link and prepare it as follows (we need to strip the first 0x200 bytes TP-Link header and the next 0x20000 bytes U-Boot):
Line 81: Line 93:
 <code>dd if=re200v1_eu_3_14_2_up_boot\(160329\).bin of=re200v1_tftp.bin bs=1 skip=131584</code> <code>dd if=re200v1_eu_3_14_2_up_boot\(160329\).bin of=re200v1_tftp.bin bs=1 skip=131584</code>
  
-Put the resulting re200v1_tftp.bin image as "test.bin" to your TFTP server. Install via Serial as you would install OpenWrt.+Transfer this file to your RE200 running OpenWrt:
  
-In theory, you could also you ''%%sysupgrade%%'' to flash back to stock, but this is untested.+<code>scp -O re200v1_tftp.bin root@192.168.1.1:/tmp</code>
  
-===== Back to Stock (v2,v3,v4) =====+Install it by forcing a ''%%sysupgrade%%'': 
 + 
 +<code>sysupgrade -F -n /tmp/re200v1_tftp.bin</code> 
 + 
 +Flashing this relatively big file takes some time, so be patient. Afterwards, you should be back to stock. 
 + 
 +<WRAP round important> 
 +**If you flash the wrong file or mess up the preparation, you will have to disassemble your device and attach serial console!** 
 +</WRAP> 
 + 
 +As an alternative, you can use serial console: Put the resulting re200v1_tftp.bin image as "test.bin" to your TFTP server. Install via Serial as you would install OpenWrt. 
 + 
 +==== Back to Stock (v2, v3, v4) ====
  
 Download an OEM firmware from TP-Link and prepare it using the tool ''%%tplink-safeloader%%'' from the OpenWrt development environment (should be included in the Image Builder): Download an OEM firmware from TP-Link and prepare it using the tool ''%%tplink-safeloader%%'' from the OpenWrt development environment (should be included in the Image Builder):
Line 95: Line 119:
 **Attention:** After the first reboot, it is advisable to flash an OEM firmware upgrade. Otherwise, the software version is displayed as 0.0.0. **Attention:** After the first reboot, it is advisable to flash an OEM firmware upgrade. Otherwise, the software version is displayed as 0.0.0.
  
-**Note:** RE200v4 OEM firmware requires a softver HIGHER than its own. This means (for the time being until a solution is found):+**Note:** RE200v4 OEM firmware requires a ''%%soft_ver%%'' HIGHER than its own. This means (for the time being until a solution is found):
  
 If you If you
Line 115: Line 139:
   - tftp to load image into ram   - tftp to load image into ram
   - bootm to start the kernel   - bootm to start the kernel
-  - you know have a running openwrt kernel and may bring a working image to /tmp (wget)+  - you now have a running openwrt kernel and may bring a working image to /tmp (wget)
   - sysupgrade with your image   - sysupgrade with your image
  
-This however will not overwrite the softver!+This however will not overwrite ''%%soft_ver%%''!
  
  
Line 137: Line 161:
 ^ [[docs:techref:hardware:port.serial|Serial]]   | [[#Serial|Yes]] || ^ [[docs:techref:hardware:port.serial|Serial]]   | [[#Serial|Yes]] ||
  
-==== Photos ====+==== Photos v1 ====
 /* =====>>>>> Standard size for photos: add ?400 to the medialink                                */ /* =====>>>>> Standard size for photos: add ?400 to the medialink                                */
 /* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ /* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */
Line 156: Line 180:
 **Note:** This will void your warranty! **Note:** This will void your warranty!
  
-<WRAP BOX> 
 The case is welded together and you can't open it easily. I used a swivel vise to crack open the case. If done carefully, it only leaves a few small marks. I super-glued mine back together after porting OpenWrt. The case is welded together and you can't open it easily. I used a swivel vise to crack open the case. If done carefully, it only leaves a few small marks. I super-glued mine back together after porting OpenWrt.
-</WRAP>+ 
 +{{page>meta:infobox:high_voltage&noheader&nofooter&noeditbtn}} 
 ==== Serial ==== ==== Serial ====
  
Line 314: Line 339:
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>mt7620a mt7620 mt7610E 8Flash 64RAM}}+{{tag>ramips mt7620 mt7628 8flash 64RAM 1port fastethernet 802.11bgn 802.11ac mt7610E 0usb mips32 wall_plug mains_powered}}
  • Last modified: 2020/11/18 05:02
  • by ferenc