Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:tp-link:deco_s4 [2024/04/06 03:55] – Created from the form at meta:create_new_device_page naftoh:tp-link:deco_s4 [2024/04/06 16:30] – [Flash Layout] naf
Line 1: Line 1:
 ====== TP-Link Deco S4 ====== ====== TP-Link Deco S4 ======
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY.  */ +TP-Link Deco S4 V2 AC1200 Whole Home Mesh Wi-Fi Router
-/* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ +
-/* USE https://openwrt.org/meta/create_new_device_page */+
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} +{{media:tplink:deco_s4.png?200|DecoS4}}
- +
-//Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.// +
- +
-<WRAP BOX> +
-FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) **remove the instructions, as well as the ''<nowiki><WRAP></nowiki>'' that encloses it.** +
-</WRAP> +
- +
-/*****/ +
-/* How to add images ========> http://openwrt.org/meta/adding_images_to_openwrt_wiki */ +
-/*****/ +
- +
-{{media:example:genericrouter1.png?200|Generic Router}} +
- +
-<WRAP BOX> +
-FIXME +
-===== Getting started with a new Device Page ===== +
-  - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** +
-  - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. +
-  - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it. +
- +
-===== Keep the articles modular ===== +
-  * Please include only model specific information, omit bla,bla and put everything generic into separate articles +
-  * If you have no time to write certain stuff, link to [[docs:start]] +
-  * [[docs:guide-user:base-system:start]] should lead the way, do not explain this again +
-  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. +
-</WRAP>+
  
 ===== Supported Versions ===== ===== Supported Versions =====
- 
-<WRAP BOX> 
-FIXME 
-  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If the tables below show information for ''<nowiki>TP-Link Deco S4 </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables below contain "Nothing found", it means that either 
-    - the dataentry page for TP-Link Deco S4  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
  
 <!-- ToH: { <!-- ToH: {
Line 50: Line 12:
   "paging": false,   "paging": false,
   "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],   "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],
-  "filterColumns": {"brand": "^TP-Link$", "model": "^Deco S4$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^TP-Link$", "model": "^Deco S4$"}
 } --> } -->
- 
-/* If no unsupported functions known, comment out the following datatable or delete it. */ 
-<!-- ToH: { 
-  "source": "json", 
-  "dom": "t", 
-  "paging": false, 
-  "shownColumns": ["unsupported_functions"], 
-  "filterColumns": {"brand": "^TP-Link$", "model": "^Deco S4$", "version": "^@@Version\\|@@$"} 
-} --> 
- 
-===== Experimental Versions ===== 
- 
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  
-   The official Table of Hardware only lists current, stable versions of OpenWrt.  * 
-   Use this space to describe any on-going efforts to create a newer version       * 
-   of the firmware for this device. Provide links to firmware images,              * 
-   active threads on the forum, or other sources of information.                   * 
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ 
- 
-//None at this time.// 
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
Line 79: Line 21:
   "paging": false,   "paging": false,
   "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],   "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],
-  "filterColumns": {"brand": "^TP-Link$", "model": "^Deco S4$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^TP-Link$", "model": "^Deco S4$"}
 } --> } -->
  
Line 85: Line 27:
 ===== Installation ===== ===== Installation =====
 /* stable release */ /* stable release */
-/* uncomment once stable release is available 
-<!-- ToH: { 
-  "source": "json", 
-  "dom": "t", 
-  "paging": false, 
-  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"], 
-  "filterColumns": {"brand": "^TP-Link$", "model": "^Deco S4$", "version": "^@@Version\\|@@$"} 
-} --> 
-*/ 
  
 +The device has a failsafe http server provided by the bootloader, but the firmware images
 +that it accepts are required to be signed by TP-Link. An exploit to bypass this restriction
 +is available here: https://github.com/naf419/tplink_deco_exploits/releases/download/v2/deco_all_webfailsafe_faux_fw_tftp_v2.bin
 +
 +To install using the exploit:
 +  - run tftp server on pc with static ip 192.168.0.2
 +  - place openwrt "initramfs-kernel.bin" image in tftp root dir
 +  - connect pc to router ethernet port1
 +  - while holding in reset button on bottom of router, power on router
 +  - from pc access router webgui at http://192.168.0.1
 +  - upload deco_all_webfailsafe_faux_fw_tftp_v2.bin
 +  - router will load and execture in-memory openwrt (browser will timeout. this is ok)
 +  - switch pc back to dhcp or static 192.168.1.x
 +  - flash openwrt sysupgrade image via luci/ssh at 192.168.1.1
  
-/* snapshot */ 
-/* delete once stable release is available */ 
 <!-- ToH: { <!-- ToH: {
   "source": "json",   "source": "json",
   "dom": "t",   "dom": "t",
   "paging": false,   "paging": false,
-  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"], +  "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"], 
-  "filterColumns": {"brand": "^TP-Link$", "model": "^Deco S4$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^TP-Link$", "model": "^Deco S4$"}
 } --> } -->
- 
- 
--> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] 
- 
-FIXME Please add the installation procedure here. 
  
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX> +^  [[toh:tp-link:deco_s4|TP-Link Deco S4]] Flash Layout                       |||||||
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// +^ Layer0                                                                       raw SPI NOR flash memory chip 16384 KiB  ||||||| 
- +^ Layer1                                                                      |  mtd0 **//u-boot//** 512 KiB              |  mtd1 **//product_info//** 24 KiB   mtd2 **//config//** 1452 KiB  |  mtd3 **//art//** 64 KiB  |  mtd4 **//firmware//** 14336 KiB                 ||| 
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. +^ Layer2                                                                      |                                                                              |                                |                            mtd5 **//kernel//** 2276 KiB                    |  mtd6 **//rootfs//** 12059 KiB                     || 
-</WRAP> +^ <color magenta>mountpoint</color>                                                                                                                        |                                |                                                                            |  <color magenta>''/''</color                     || 
- +^ filesystem                                                                  |                                                                              |                                |                                                                            |  [[docs:techref:filesystems#overlayfs|OverlayFS]]  || 
-==== OEM easy installation ==== +^ Layer3                                                                      |                                                                              |                                |                                                                            |                                                    |  mtd7 **//rootfs_data//** 7872 KiB    | 
- +Size in KiB                                                                  512 KiB                                   24 KiB                            |  1452 KiB                      |  64 KiB                    2276 KiB                                        |  12059 KiB                                          7872 KiB                             
-<WRAP BOX> +Name                                                                         **//u-boot//**                            **//product_info//**               **//config//**                 **//art//**              |  **//kernel//**                                                                                      **//rootfs_data//**                  
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ +<color magenta>mountpoint</color>                                            //none//                                  //none//                           //none//                      |  //none//                  //none//                                         <color magenta>''/rom''</color                  |  <color magenta>''/overlay''</color>  | 
-**//Remove / modify them if they do not apply to this particular device!//** +^ filesystem                                                                  |  //none//                                  //none//                          |  //none//                      |  //none//                  //none//                                        |  [[docs:techref:filesystems#SquashFS]]              [[docs:techref:filesystems#JFFS2]]   |
- +
-This section deals with +
-  * How you install OpenWrt from a device freshly opened +
-  The steps required such as reset to factory defaults if the device has already been configured +
- +
-**Note:** Reset router to factory defaults if it has been previously configured. +
-  Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +
-  Upload .bin file to router +
-  * Wait for it to reboot +
-  Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. +
-</WRAP+
- +
-==== OEM installation using the TFTP method ==== +
- +
-->  [[docs:guide-user:installation:generic.flashing.tftp]] +
- +
-=== Specific values needed for tftp === +
- +
-<WRAP BOX> +
- +
-FIXME Enter values for "FILL-IN" below +
- +
-Bootloader tftp server IPv4 address  FILL-IN   +
-Bootloader MAC address (special)     FILL-IN   | +
-^ Firmware tftp image                  [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//| +
-^ TFTP transfer window                 FILL-IN seconds                                +
-TFTP window start                    approximately FILL-IN seconds after power on   | +
-^ TFTP client required IP address      FILL-IN                                        | +
- +
-</WRAP+
 ===== Upgrading OpenWrt ===== ===== Upgrading OpenWrt =====
 ->  [[docs:guide-user:installation:generic.sysupgrade]] ->  [[docs:guide-user:installation:generic.sysupgrade]]
- 
-<WRAP BOX> 
- 
-FIXME These are generic instructions. Update with your router's specifics. 
- 
-==== LuCI Web Upgrade Process ==== 
- 
-  * Browse to ''<nowiki>http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/</nowiki>'' LuCI Upgrade URL 
-  * Upload image file for sysupgrade to LuCI 
-  * Wait for reboot 
- 
-==== Terminal Upgrade Process ==== 
- 
-If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. 
-There are two command line methods for upgrading: 
- 
-  * ''sysupgrade'' 
-  * ''mtd'' 
- 
-Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. 
- 
-=== sysupgrade === 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-sysupgrade /tmp/xxx.abc 
-</code> 
- 
-=== mtd === 
- 
-If ''sysupgrade'' does not support this router, use ''mtd''. 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-mtd write /tmp/xxx.abc linux && reboot 
-</code> 
- 
-</WRAP> 
- 
-===== Debricking ===== 
--> [[docs:guide-user:troubleshooting:generic.debrick]] 
- 
-===== Failsafe mode ===== 
--> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] 
- 
-===== Basic configuration ===== 
--> [[docs:guide-user:base-system:start|Basic configuration]] After flashing, proceed with this.\\ 
-Set up your Internet connection, configure wireless, configure USB port, etc. 
  
 ===== Specific Configuration ===== ===== Specific Configuration =====
Line 243: Line 98:
 -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s).
 Here, we merely name the buttons, so we can use them in the above Howto. Here, we merely name the buttons, so we can use them in the above Howto.
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
  
 The TP-Link Deco S4 has the following buttons: The TP-Link Deco S4 has the following buttons:
  
 ^ BUTTON                       ^ Event   ^ ^ BUTTON                       ^ Event   ^
-EXAMPLE Reset                |  reset  | +| Reset                |  reset  |
-| EXAMPLE Secure Easy Setup    |   ses   | +
-| EXAMPLE No buttons at all.      -    | +
- +
-</WRAP>+
  
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-<WRAP BOX> +<!-- ToH: { 
-FIXME +  "source": "json", 
-  This table is automatically generated, **once the correct filters for Brand and Model are set.** +  "dom": "t"
-  - If you see "Nothing.instead of a tableplease **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy. +  "paging": false
-  - If you still don'see a table hereor a table filled with '¿': [[toh:start|Is there already a Techdata page available]] for TP-Link Deco S4 ? If not: [[meta:create_new_dataentry_page|Create one]]. +  "rotate"true
-  - If you see a table with the desired device dataeverything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. +  "shownColumns"["brand""model""version""devicetype""availability""supportedsincecommit""supportedsincerel""supportedcurrentrel""unsupported_functions""bootloader""target""cpumhz""flashmb""rammb""switch""ethernet100mports""ethernet1gports""commentsnetworkports""modem""vlan""wlan24ghz""wlan50ghz""wlanhardware""wlancomments""detachableantennas""usbports""sataports""commentsusbsataports""serial""jtag""ledcount""buttoncount""powersupply""deviceid""owrt_forum_topic_url""wikideviurl""oemdevicehomepageurl""firmwareoemstockurl""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl""comments"]
-  - If it still doesn't workDon't panic, calm downtake a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. +  "filterColumns"{"brand": "^TP-Link$", "model""^Deco S4$"} 
-</WRAP> +-->
- +
----- datatemplatelist dttpllist ---- +
-template: meta:template_datatemplatelist +
-cols    : BrandModelVersionsDevice TypeAvailabilitySupported Since Commit_gitSupported since RelSupported current RelUnsupportedBootloaderCPUTargetCPU MHzFlash MBsRAM MBSwitchEthernet 100M ports_Ethernet Gbit ports_Comments network ports_ModemVLANWLAN 2.4GHzWLAN 5.0GHzWLAN HardwaresWLAN Comments_Detachable Antennas_USB ports_SATA ports_Comments USB SATA ports_SerialJTAGLED countButton countPower supplyDevice Techdata_pageidForum topic URL_urlwikidevi URL_urlOEM Device Homepage URL_urlFirmware OEM Stock URL_urlFirmware OpenWrt Install URL_urlFirmware OpenWrt Upgrade URL_urlComments_ +
-filter  : Brand=TP-Link +
-filter  Model=Deco S4 +
-filter  : Versions= +
-----+
  
 ==== Photos ==== ==== Photos ====
Line 294: Line 134:
 **Note:** This will void your warranty! **Note:** This will void your warranty!
  
-<WRAP BOX> +see M4R instructions here: https://imgur.com/a/gK1CHMb
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, .../+
-  * To remove the cover and open the device, do a/b/c +
-</WRAP> +
- +
-//Main PCB://\\ +
-**Insert photo of PCB** +
 ==== Serial ==== ==== Serial ====
 -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
  
-How to connect to the Serial Port of this specific device:\\ +see M4R instructions here: https://imgur.com/a/gK1CHMb
-**Insert photo of PCB with markings for serial port** +
- +
-<WRAP BOX> +
-FIXME //Replace EXAMPLE by real values.// +
-</WRAP>+
  
-^ Serial connection parameters\\ for TP-Link Deco S4 @@Version@@ EXAMPLE 115200, 8N1, 3.3V |+^ Serial connection parameters\\ for TP-Link Deco S4 | 115200, 8N1, 3.3V |
  
 ==== JTAG ==== ==== JTAG ====
Line 331: Line 159:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki+<nowiki> 
-</WRAP>\\+[    0.000000] Linux version 3.3.8 (tplink@ubuntu) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #14 Thu Jan 13 11:39:32 CST 2022 
 +[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU revision is: 00019750 (MIPS 74Kc) 
 +[    0.000000] SoC: Qualcomm Atheros QCA956X rev 0 
 +[    0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000]  memory: 08000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Zone PFN ranges: 
 +[    0.000000]   Normal   0x00000000 -> 0x00008000 
 +[    0.000000] Movable zone start PFN for each node 
 +[    0.000000] Early memory PFN ranges 
 +[    0.000000]     0: 0x00000000 -> 0x00008000 
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512 
 +[    0.000000] Kernel command line:  board=AP152 console=ttyS0,115200 mtdparts=spi0.0:512k(u-boot),1472k(config),64k(art),2048k(kernel),12288k(rootfs) rootfstype=squashfs crashkernel=10M@20M oops=panic 
 +[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) 
 +[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
 +[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] Memory: 126304k/131072k available (2222k kernel code, 4768k reserved, 598k data, 188k init, 0k highmem) 
 +[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS:83 
 +[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216) 
 +[    0.060000] pid_max: default: 32768 minimum: 301 
 +[    0.060000] Mount-cache hash table entries: 512 
 +[    0.070000] NET: Registered protocol family 16 
 +[    0.070000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79 
 +[    0.080000] MIPS: machine is Qualcomm Atheros AP152 reference board 
 +[    0.080000] 
 +[    0.080000] WLAN firmware dump buffer allocation of 2097152 bytes @ address 0x87a00000- SUCCESS !!! 
 +[    0.090000] registering PCI controller with io_map_base unset 
 +[    0.300000] bio: create slab <bio-0> at 0 
 +[    0.300000] PCI host bridge to bus 0000:00 
 +[    0.310000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] 
 +[    0.310000] pci_bus 0000:00: root bus resource [io  0x0001] 
 +[    0.320000] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] 
 +[    0.320000] pci 0000:00:00.0: using irq 40 for pin 1 
 +[    0.330000] Switching to clocksource MIPS 
 +[    0.330000] NET: Registered protocol family 2 
 +[    0.340000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +[    0.340000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) 
 +[    0.350000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) 
 +[    0.350000] TCP: Hash tables configured (established 4096 bind 4096) 
 +[    0.360000] TCP reno registered 
 +[    0.360000] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.370000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.370000] NET: Registered protocol family 1 
 +[    0.390000] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.390000] msgmni has been set to 246 
 +[    0.400000] io scheduler noop registered 
 +[    0.400000] io scheduler deadline registered (default) 
 +[    0.410000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +[    0.430000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A 
 +[    0.440000] console [ttyS0] enabled, bootconsole disabled 
 +[    0.440000] console [ttyS0] enabled, bootconsole disabled 
 +[    0.450000] m25p80 spi0.0: found xmc25q128, expected m25p80 
 +[    0.460000] m25p80 spi0.0: xmc25q128 (16384 Kbytes) 
 +[    0.460000] 5 cmdlinepart partitions found on MTD device spi0.0 
 +[    0.470000] Creating 5 MTD partitions on "spi0.0": 
 +[    0.470000] 0x000000000000-0x000000080000 : "u-boot" 
 +[    0.480000] 0x000000080000-0x0000001f0000 : "config" 
 +[    0.490000] 0x0000001f0000-0x000000200000 : "art" 
 +[    0.490000] 0x000000200000-0x000000400000 : "kernel" 
 +[    0.500000] 0x000000400000-0x000001000000 : "rootfs" 
 +[    0.510000] mtd: partition "rootfs" set to be root filesystem 
 +[    0.510000] flash_chrdev : flash_chrdev_init 
 +[    0.520000] flash_chrdev : flash_chrdev_init 
 +[    0.660000] ag71xx_mdio: probed 
 +[    0.660000] eth0: Atheros AG71xx at 0xb9000000, irq 4 
 +[    1.240000] eth0: Atheros AR8327 switch driver attached. 
 +[    4.170000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316] 
 +[    4.190000] TCP cubic registered 
 +[    4.190000] NET: Registered protocol family 17 
 +[    4.190000] Bridge firewalling registered 
 +[    4.200000] 8021q: 802.1Q VLAN Support v1.8 
 +[    4.200000] ### of_selftest(): No testcase data in device tree; not running tests 
 +[    4.220000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. 
 +[    4.220000] Freeing unused kernel memory: 188k freed 
 +[    5.260000] init: Console is alive 
 +[    8.260000] init: - preinit - 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
 +[   10.190000] phy_detect_sk has no listeners 
 +[   10.190000] ar8216_read_status:dev[switch0] oldstatus[0] status[32] 
 +[   10.210000] eth0: link up (1000Mbps/Full duplex) 
 +Before mount_root 
 +mounting /dev/root 
 +cp: can't stat '/tmp/log_export_tmp/*': No such file or directory 
 +After mount_root 
 +377+0 records in 
 +377+0 records out 
 +377+0 records in 
 +377+0 records out 
 +[   13.750000] procd: - early - 
 +[   14.390000] procd: - ubus - 
 +[   15.410000] procd: - init - 
 +Please press Enter to activate this console. 
 +[   15.790000] NET: Registered protocol family 10 
 +[   15.810000] Button Hotplug driver version 0.4.1 
 +[   15.810000] PPP generic driver version 2.4.2 
 +[   15.820000] NET: Registered protocol family 24 
 +[   15.830000] L2TP core driver, V2.0 
 +[   15.840000] L2TP netlink interface 
 +[   15.860000] IPv6 over IPv4 tunneling driver 
 +[   15.860000] GRE over IPv4 demultiplexor driver 
 +[   15.880000] GRE over IPv4 tunneling driver 
 +[   15.900000] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) 
 +[   15.930000] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[   15.970000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max) 
 +[   15.990000] PPPoL2TP kernel driver, V2.0 
 +[   16.030000] PPTP driver version 0.8.5 
 +[   16.070000] xt_time: kernel timezone is -0000 
 +[   16.140000] Netfilter messages via NETLINK v0.30. 
 +[   16.160000] Ebtables v2.0 registered 
 +[   16.210000] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[   16.260000] ctnetlink v0.93: registering with nfnetlink. 
 +[   16.310000] ssdk_plat_init start 
 +[   16.310000] Register QCA PHY driver 
 +[   16.360000] isisc_ip_reset-1997 isisc_mac_snap[0]. 
 +[   16.430000] qca-ssdk module init succeeded! 
 +[   16.450000] AR71XX_RESET_REG_WDOG_CTRL: 0x0 
 +[   16.450000]  QCA Hy-Fi multicast installation successfully 
 +[   16.490000] u32 classifier 
 +[   16.500000]     Performance counters on 
 +[   16.500000]     input device check on 
 +[   16.500000]     Actions configured 
 +[   16.520000] Mirror/redirect action on 
 +reloadprofile() begin 
 +reloadprofile() end 
 +==reloadConfig()== begin 
 +  ==loadDefaultConfig()== begin 
 +  ==loadConfigToFiles(): default-config to /tmp/defaultconfig== begin 
 +  ==loadConfigToFiles()== end 
 +  ==set_usrconfig_info()== start 
 +  ==set_usrconfig_info()== end 
 +  ==loadDefaultConfig()== end 
 +  ==loadConfigToFiles(): user-config to /tmp/userconfig== begin 
 +  ==loadConfigToFiles()== end 
 +==reloadConfig()===== no need to load emmc-config 
 +  ==loadConfigToFiles(): device-config to /tmp/userconfig== begin 
 +  ==loadConfigToFiles()== end 
 +  ** user-config loaded ** 
 +==reloadConfig()== end 
 +merge_extra_config() begin 
 +  ==loadConfigToFiles(): default-config to /tmp/merge== begin 
 +  ==loadConfigToFiles()== end 
 +mergeconfigbycountry() begin 
 +mergeconfigbycountry() country US 
 +mergeconfigbycountry() end 
 +merge_extra_config() end 
 +phylink down boot 1 
 +[   22.240000] ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[   23.700000] phy_detect_sk has no listeners 
 +[   23.700000] ar8216_read_status:dev[switch0] oldstatus[32] status[0] 
 +[   23.720000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   23.730000] eth0: link up (1000Mbps/Full duplex) 
 +[   25.790000] Load statistics in Router Mode 
 +[   25.800000] module inited 
 +[   27.780000] ADDRCONF(NETDEV_UP): br-wan: link is not ready 
 +␛[1m[ vlan_set_device_state ] 069: --------------->Create VID='1' 
 +␛[0m 
 +␛[1m[ vlan_set_device_state ] 069: --------------->Create VID='2' 
 +␛[0m 
 +[   27.880000] device eth0.1 entered promiscuous mode 
 +[   27.890000] device eth0 entered promiscuous mode 
 +[   27.910000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   27.910000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   27.940000] device eth0.2 entered promiscuous mode 
 +[   27.940000] br-lan: port 2(eth0.2) entered forwarding state 
 +[   27.950000] br-lan: port 2(eth0.2) entered forwarding state 
 +[   28.240000] br-lan: port 2(eth0.2) entered disabled state 
 +[   28.250000] br-lan: port 1(eth0.1) entered disabled state 
 +[   28.290000] br-lan: port 2(eth0.2) entered forwarding state 
 +[   28.300000] br-lan: port 2(eth0.2) entered forwarding state 
 +[   28.310000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   28.310000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   28.360000] ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready 
 +[   28.400000] ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready 
 +hyd_restart OK 
 +[   30.300000] br-lan: port 2(eth0.2) entered forwarding state 
 +[   30.310000] br-lan: port 1(eth0.1) entered forwarding state 
 +[awnd_update_wifi_tpie:895]: config_generic failed awnd_update_tpie(): ath02[-1] 
 + 
 +[awnd_update_wifi_tpie:895]: config_generic failed awnd_update_tpie(): ath12[-1] 
 + 
 +apsd: start apsd 
 +whc (repacd): stop repacd-run.sh 
 +=========Fix default enable ========= 
 +=========FAP has been binded ========= 
 +whc (repacd): Start: 
 +whc (repacd): GatewayConnectedMode(gwcon_mode): CAP 
 +whc (repacd): TrafficSeparationEnabled(traffic_separation_enabled):
 +whc (repacd): stop /etc/init.d/wsplcd 
 +whc (repacd): get whc_wifi_config_lock 
 +whc (repacd): starting WHC auto-configuration 
 +whc (repacd): Managed network: lan 
 +whc (repacd): Device type: AP 
 +whc (repacd): Start: 
 +whc (repacd): GatewayConnectedMode(gwcon_mode): CAP 
 +whc (repacd): TrafficSeparationEnabled(traffic_separation_enabled):
 +whc (repacd): Sysmode: Router 
 +whc (repacd): the guest network version of the device is latest, we do nothing(uci_revert_state wifi guest enable) 
 +[   36.300000] mode:0 
 +whc (repacd): wifi config change(is different from /var/state/wifi). wifi_cmd:reload wifi0,wifi1 
 +whc (repacd): Using SON mode for GW Connected AP 
 +whc (repacd): __repacd_restart_dependencies: Restarting network stack... 
 +wifi reload 
 +dhcp6s is not running, delete pid_file: rm /var/run/dhcp6s.pid 
 +hyd_restart OK 
 +qcawifi disable radio wifi0 
 +qcawifi disable radio wifi1 
 +qcawifi: enable radio wifi0 
 +__runqueue_task_timeout-175:boot /etc/rc.d/S45firewall timeout at 0x779cdf44 
 +[   41.890000] mem_manager: module license 'unspecified' taints kernel. 
 +[   41.890000] Disabling lock debugging due to kernel taint 
 +[   42.080000] ath_dfs: Version 2.0.0 
 +[   42.080000] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved 
 +[   42.230000] ath_spectral: Version 2.0.0 
 +[   42.230000] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved 
 +[   43.550000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D) 
 +[   43.600000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved 
 +[   43.680000] ath_tx99: Version 2.0 
 +[   43.680000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved 
 +[   43.760000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved 
 +[   43.830000] qca_da init 
 +[   43.830000] __ath_attach: Set global_scn[0] 
 +[   43.830000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** 
 +[   43.840000] ACBKMinfree = 48 
 +[   43.850000] ACBEMinfree = 32 
 +[   43.850000] ACVIMinfree = 16 
 +[   43.850000] ACVOMinfree = 0 
 +[   43.850000] CABMinfree = 48 
 +[   43.860000] UAPSDMinfree = 0 
 +[   43.860000] ATH_TXBUF=2700 
 +[   43.870000] Enterprise mode: 0x03bda000 
 +[   43.880000] Restoring Cal data from FS 
 +[   43.880000] qdf_fs_read[59], Open File /tmp/wifi0.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 988file size:12064qdf_fs_read[79]: caldata data size mismatch, fsize=12064, cal_size=1088 
 +[   43.900000] ART Version : -48.0.0 
 +[   43.900000] SW Image Version : -48.0.0.0.0 
 +[   43.910000] Board Revision : 
 +[   43.910000] ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125 
 +[   43.920000] SPECTRAL : get_capability not registered 
 +[   43.920000] HAL_CAP_PHYDIAG : Capable 
 +[   43.930000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) 
 +[   43.940000] SPECTRAL : get_capability not registered 
 +[   43.940000] HAL_CAP_RADAR   : Capable 
 +[   43.950000] SPECTRAL : Need to fix the capablity check for SPECTRAL 
 +[   43.950000]  (spectral_attach : 242) 
 +[   43.960000] SPECTRAL : get_capability not registered 
 +[   43.960000] HAL_CAP_SPECTRAL_SCAN : Capable 
 +[   43.960000] SPECTRAL : get_tsf64 not registered 
 +[   43.970000] spectral_init_netlink 78 NULL SKB 
 +[   43.970000] SPECTRAL : No ADVANCED SPECTRAL SUPPORT 
 +[   43.980000] SPECTRAL :----- module attached 
 +[   43.980000] Green-AP : Green-AP : Attached 
 +[   43.980000] 
 +[   43.990000] Starting random number generator thread 
 +[   44.020000] ath_get_caps[6188] rx chainmask mismatch actual 3 sc_chainmak 0 
 +[   44.020000] ath_get_caps[6163] tx chainmask mismatch actual 3 sc_chainmak 0 
 +[   44.030000] band steering initialized for direct attach hardware 
 +[   44.040000] ieee80211_bsteering_attach: Band steering initialized 
 +[   44.050000] ath_attach_dfs[12586] dfsdomain 1 
 +[   44.060000] dfs_attach: event log enabled by default 
 +[   44.070000] SPECTRAL : module already attached 
 +[   44.070000] ath_attach: Set global_ic[1]..gloabl_ic ptr:8493f740 
 +[   44.080000] osif_wrap_attach:448 osif wrap attached 
 +[   44.080000] osif_wrap_devt_init:409 osif wrap dev table init done 
 +[   44.090000]  Wrap Attached: Wrap_com =861a4c00 ic->ic_wrap_com=861a4c00 &wrap_com->wc_devt=861a4c00 
 +[   44.110000] ath_tx_paprd_init sc 86218000 PAPRD disabled in HAL 
 +[   44.120000] wifi0: Atheros 956X: mem_start: =0xb8100000, mem_end: =0xb8120000, irq=47 
 +[   44.120000] ath_da_pci:  (Atheros/multi-bss) 
 +[   44.680000] qca_ol init 
 +[   44.680000] ath_ol_pci:  (Atheros/multi-bss) 
 +[   44.680000] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x56 
 +[   44.690000] ath_ol_pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] 
 +[   44.700000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) 
 +[   44.700000] hif_pci_enable_bus: hif_enable_pci done *********** QCA9888 *************hif_pci_enable_bus: hif_type = 0xe, target_type = 0xchif_pci_enable_bus: hif_pci_probe_tgt_wakeup donehif_target_sync: Loop checking FW signalhif_target_sync: Got FW signal, retries = 0hif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_set_hia_extnd:
 +[   44.750000] chip_id 0xc chip_revision 0x0 
 +[   44.750000] 
 +[   44.750000]  CLOCK PLL skipped 
 +[   44.760000] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff 
 +[   44.760000] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL 
 +[   44.770000] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_configure_legacy_irq: X, ret = 0hif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4 
 +[   44.800000] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON 
 +[   44.810000] __ol_ath_attach() Allocated scn 84600380 
 +[   44.820000] __ol_ath_attach: dev name wifi1 
 +[   44.820000] ol_ath_attach interface_id 1 
 +[   44.830000] ol_target_init() BMI inited. 
 +[   44.860000] ol_target_init() BMI Get Target Info. 
 +[   44.860000] Chip id: 0xc, chip version: 0x1000000 
 +[   44.860000] 
 +[   44.860000]  CE WAR Disabled 
 +[   44.900000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 
 +[   44.900000] ol_target_init() configure Target . 
 +[   44.950000] 
 +[   44.950000]  Target Version is 1000000 
 +[   44.950000] 
 +[   44.950000]  Flash Download Address  c0000 
 +[   44.960000] ol_transfer_bin_file: flash data file defined 
 +[   44.960000] ol_transfer_bin_file[3784] Get Caldata for wifi1. 
 +[   44.970000] qdf_fs_read[59], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 989file size:12064qc98xx_verify_checksum: flash checksum passed: 0xe03f 
 +[   45.010000] ol_transfer_bin_file 3845: Download Flash data len 12064 
 +[   45.040000] Board extended Data download address: 0x0 
 +[   45.080000] 
 +[   45.080000]  Board data initialized 
 +[   45.120000] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 
 +[   45.120000] 
 +[   45.120000]  Selecting  OTP binary for CHIP Version 0 
 +[   45.220000] ol_transfer_bin_file 3665: downloading file 0, Download data len 9116 
 +[   45.270000] 
 +[   45.270000]  First OTP send param 8000 
 +[   45.520000] ol_ath_download_firmware :First OTP download and Execute is good address:0x6000 return param 4660 
 +[   45.530000] ol_ath_download_firmware:##Board Id 24 , CHIP Id 0 
 +[   45.540000] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 
 +[   45.550000] qdf_fs_read[59], Open File /tmp/country SUCCESS!!file system magic:16914836super blocksize:4096inode 1701file size:3qdf_fs_read[79]: caldata data size mismatch, fsize=3, cal_size=2!!!!!!!!!!!!!country code is US!!!!!!!!!!!!!!! 
 +[   45.570000] qdf_fs_read[59], Open File /tmp/hardversion SUCCESS!!file system magic:16914836super blocksize:4096inode 1702file size:4qdf_fs_read[79]: caldata data size mismatch, fsize=4, cal_size=3update hw_ver from 2 to 2!!! 
 +[   45.590000] 
 +[   45.590000]  wifi1: Selecting board data file name boardData_3_0_QCA9888_5G_YA105.bin 
 +[   45.600000] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9888/hw.2/boardData_3_0_QCA9888_5G_YA105.bin 
 +[   45.650000] ol_transfer_bin_file 3665: downloading file 3, Download data len 12064 
 +[   45.660000] Board extended Data download address: 0x0 
 +[   45.700000] ol_ath_download_firmware: Using 0x1234 for the remainder of init 
 +[   45.710000] 
 +[   45.710000]  Selecting  OTP binary for CHIP Version 0 
 +[   45.750000] ol_transfer_bin_file 3665: downloading file 0, Download data len 9116 
 +[   45.800000] 
 +[   45.800000]  [Flash] : Ignore Module param 
 +[   45.800000] 
 +[   45.800000]  Second otp download Param 10000 
 +[   46.060000] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 
 +[   46.070000] 
 +[   46.070000]  Mission mode: Firmware CHIP Version 0 
 +[   46.410000] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 
 +[   46.450000] ol_swap_wlan_memory_expansion: length:261771 size_left:261791 dma_size_left:262144 fw_temp:c1f08004 fw_entry_size:261795 
 +[   46.460000] ol_swap_wlan_memory_expansion: dma_virt_addr :a4580000 fw_temp: c1f08008 length: 261771 
 +[   46.470000] Swap: bytes_left to copy: fw:16; dma_page:373 
 +[   46.480000] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:373 fw_temp:c1f47e97 fw_entry_size:261795 
 +[   46.490000] Swap: wrong length read:0 
 +[   46.490000] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 261771 Target address 41b0c8 
 +[   46.510000] scn=84600380  target_write_addr=41b0c8 seg_info=86739310 
 +[   46.510000] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 
 +[   46.520000] bin_filename=QCA9888/hw.2/athwlan.bin swap_filename=/lib/firmware/QCA9888/hw.2/athwlan.codeswap.bin 
 +[   46.530000] ol_transfer_bin_file: Downloading firmware file: QCA9888/hw.2/athwlan.bin 
 +[   47.160000] ol_transfer_bin_file 3665: downloading file 1, Download data len 388240 
 +[   48.900000] ol_target_init() Download FW done. 
 +[   48.910000] ol_ath_attach() WMI attached. wmi_handle 860b4000 
 +[   48.910000] wmi_unified_register_event_handler: Event id 62 is unavailable 
 +[   48.920000] +htc_create ..  HIF :84650000-htc_create: (0x8678a800) 
 +[   48.930000] htc_wmi_init() HT Create . 8678a800 
 +[   48.940000] htc_wmi_init 7813 host_enable 0 nss_nwifi_offload 0 
 +[   48.950000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) 
 +[   48.960000]  OL_ACBKMinfree : 0 
 +[   48.960000]  OL_ACBEMinfree : 0 
 +[   48.960000]  OL_ACVIMinfree : 0 
 +[   48.970000]  OL_ACVOMinfree : 0 
 +[   48.970000] hif_enable_fastpath, Enabling fastpath mode 
 +[   48.970000] +HWT 
 +[   48.980000] hif_completion_thread_startup: pipe_num:0 pipe_info:0x846530c4hif_completion_thread_startup: pipe_num:3 pipe_info:0x84653184hif_completion_thread_startup: pipe_num:4 pipe_info:0x846531c4 
 +[   49.000000] -HWT 
 +[   49.000000] Startup Mode-0 set 
 +[   49.000000] 
 +[   49.000000] <=== cfg max peer id 544 ====> 
 +[   49.010000] htt_peer_map_timer_init Enter pdev 83cb0000 hrtimer 83cb4960 
 +[   49.020000] 
 +[   49.020000]  htt_alloc_peer_map_mem : Alloc Success : host q vaddr 84664000 paddr 4664000 
 +[   49.030000] 
 +[   49.030000]  htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts 
 +[   49.040000] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from 83920000 
 +[   49.060000] Firmware_Build_Number:38 
 +[   49.070000] FW wireless modes: 0x1f9001 
 +[   49.070000] num_rf_chain:0x00000002  ht_cap_info:0x0000085b  vht_cap_info:0x339979b2  vht_supp_mcs:0x0000fffa 
 +[   49.080000] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0 
 +[   49.090000] 
 +[   49.090000] Sending Ext resource cfg: HOST PLATFORM as 1 
 +[   49.090000] fw_feature_bitmap as 50 to TGT 
 +[   49.100000] ol_ath_service_ready_event: tt_support: 1 
 +[   49.100000] ol_ath_service_ready_event: periodic_chan_stats:
 +[   49.110000] ol_ath_service_ready_event: sw_cal_support_check_flag:
 +[   49.120000] Peer Caching Enabled ; num_peers = 146, num_active_peers = 52 num_tids = 104, num_vdevs = 17 
 +[   49.130000] EXT NSS Supported 
 +[   49.130000] idx 1 req 2  num_units 1 num_unit_info 12 unit size 256 actual units 53 
 +[   49.140000] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, 
 +[   49.150000] idx 2 req 3  num_units 1 num_unit_info 12 unit size 1024 actual units 53 
 +[   49.150000] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, 
 +[   49.160000] idx 3 req 4  num_units 1 num_unit_info 12 unit size 4096 actual units 53 
 +[   49.170000] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, 
 +[   49.180000] idx 0 req 1  num_units 0 num_unit_info 2 unit size 896 actual units 147 
 +[   49.190000] ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 147 unit_len 896, 
 +[   49.200000] idx 4 req 5  num_units 0 num_unit_info 2 unit size 2068 actual units 147 
 +[   49.200000] ol_ath_alloc_host_mem_chunk req_id 5 idx 4 num_units 147 unit_len 2068, 
 +[   49.210000] Support not added yet for Service 91 
 +[   49.220000] Support not added yet for Service 92 
 +[   49.220000] No EXT_MSG send INIT now 
 +[   49.230000] chunk 0 len 13568 requested , ptr  0x3984000 
 +[   49.230000] chunk 1 len 54272 requested , ptr  0x3990000 
 +[   49.240000] chunk 2 len 217088 requested , ptr  0x39c0000 
 +[   49.240000] chunk 3 len 131712 requested , ptr  0x3a00000 
 +[   49.250000] chunk 4 len 303996 requested , ptr  0x3a80000 
 +[   49.250000] chunk 5 len 0 requested , ptr  0xffffffff 
 +[   49.260000] ol_ath_service_ready_event[4317] WAPI MBSSID 2 
 +[   49.270000] smart_log_init: Smart logging Enabled buf=839a0000 (size=65536) 
 +[   49.300000] Version = 16777216 3  status = 0 
 +[   49.310000] ol_ath_connect_htc() WMI is ready 
 +[   49.310000] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1 
 +[   49.320000] target uses HTT version 2.2; host uses 2.2 
 +[   49.330000] ol_ath_attach() connect HTC. 
 +[   49.340000] bypasswmi : 0 
 +[   49.340000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. 
 +[   49.350000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 
 +[   49.360000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 
 +[   49.370000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 
 +[   49.370000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 
 +[   49.380000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 
 +[   49.390000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 
 +[   49.400000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 
 +[   49.400000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 
 +[   49.410000] Add VHT80 channel: 5210 
 +[   49.410000] Add VHT80 channel: 5290 
 +[   49.420000] Add VHT80 channel: 5530 
 +[   49.420000] Add VHT80 channel: 5610 
 +[   49.430000] Add VHT80 channel: 5690 
 +[   49.430000] Add VHT80 channel: 5775 
 +[   49.430000] Skipping VHT80 channel 5825 
 +[   49.440000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 
 +[   49.440000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 
 +[   49.450000] freq=58 
 +[   49.460000] freq=106 
 +[   49.460000] freq=122 
 +[   49.460000] freq=138 
 +[   49.460000] OL Resmgr Init-ed 
 +[   49.470000] ieee80211_bsteering_attach: Band steering initialized 
 +[   49.470000] SPECTRAL : get_capability not registered 
 +[   49.480000] HAL_CAP_PHYDIAG : Capable 
 +[   49.480000] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) 
 +[   49.490000] SPECTRAL : get_capability not registered 
 +[   49.500000] HAL_CAP_RADAR   : Capable 
 +[   49.500000] SPECTRAL : Need to fix the capablity check for SPECTRAL 
 +[   49.500000]  (spectral_attach : 242) 
 +[   49.510000] SPECTRAL : get_capability not registered 
 +[   49.510000] HAL_CAP_SPECTRAL_SCAN : Capable 
 +[   49.520000] SPECTRAL : get_tsf64 not registered 
 +[   49.520000] spectral_init_netlink 78 NULL SKB 
 +[   49.530000] Green-AP : Green-AP : Attached 
 +[   49.530000] 
 +[   49.530000] Green-AP : Attached 
 +[   49.540000] rate power table override is only supported for AR98XX 
 +[   49.540000] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. 
 +[   49.550000] ol_if_dfs_attach: called; ptr=8398997c, radar_info=86107b38 
 +[   49.560000] dfs_attach: event log enabled by default 
 +[   49.560000] >>>> CB Set   (null) 
 +[   49.570000] ol_ath_attach() UMAC attach . 
 +[   49.570000] 
 +[   49.570000]  BURSTING enabled by default 
 +[   49.580000] ol_ath_attach: Set global_ic[2] ..ptr:8493f740 
 +[   49.580000] ath_lowi_if_netlink_init LOWI Netlink successfully created 
 +[   49.590000] osif_wrap_attach:448 osif wrap attached 
 +[   49.600000] osif_wrap_devt_init:409 osif wrap dev table init done 
 +[   49.600000]  Wrap Attached: Wrap_com =86737e00 ic->ic_wrap_com=86737e00 &wrap_com->wc_devt=86737e00 
 +[   49.610000] __ol_ath_attach: needed_headroom reservation 60 
 +[   49.630000] ol_ath_thermal_mitigation_attach: -- 
 +[   49.640000] ol_ath_pci_probe num_radios=0, wifi_radios[0].sc = 84600380 wifi_radio_type = 2 
 +[   49.650000] ath_sysfs_diag_init: diag_fsattr 
 +[   49.660000]  pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16 
 +[   49.670000] +hif_update_pipe_callback pipeid 8 
 +[   49.680000] -hif_update_pipe_callback 
 +[   49.760000] __sa_init_module 
 +[   49.940000] [wifi1] FWLOG: [55720] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 ) 
 +[   49.950000] [wifi1] FWLOG: [55720] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 ) 
 +[   49.960000] [wifi1] FWLOG: [55720] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 ) 
 +[   49.970000] [wifi1] FWLOG: [55720] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 ) 
 +[   49.980000] [wifi1] FWLOG: [55720] WAL_DBGID_TX_AC_BUFFER_SET ( 0x100, 0x11e1a300 ) 
 +[   49.990000] [wifi1] FWLOG: [55876] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0xa10, 0x160, 0x10, 0x0 ) 
 +[   50.000000] [wifi1] FWLOG: [55876] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0x10, 0x0, 0x10, 0x12 ) 
 +[   50.070000] ath_net80211_dfs_clist_update: called, cmd=1, nollist=  (null), nentries=0 
 +[   50.080000] ath_attach_dfs[12586] dfsdomain 1 
 +[   50.090000] dfs_attach: event log enabled by default 
 +[   50.160000] ath_net80211_dfs_clist_update: called, cmd=1, nollist=  (null), nentries=0 
 +[   50.170000] ath_attach_dfs[12586] dfsdomain 1 
 +[   50.180000] dfs_attach: event log enabled by default 
 +[   50.220000]  DCS for CW interference mitigation:   0 
 +[   50.220000]  DCS for WLAN interference mitigation: 0 
 +[   50.480000]  Disconnect_timeout value entered:10 
 +[   50.500000]  reconfiguration_timeout value entered:60 
 +[   51.010000] wlan_vap_create : enter. devhandle=0x86270380, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +[   51.020000] ieee80211_mbo_vattach:MBO Initialized 
 +[   51.020000] ieee80211_oce_vattach: OCE Initialized 
 +[   51.030000] wlan_vap_create : exit. devhandle=0x86270380, vap=0x86238000, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +[   51.040000] __ieee80211_smart_ant_init: Smart Antenna is not supported 
 +[   51.050000] VAP device ath0 created osifp: (86741380) os_if: (86238000) 
 +[   51.070000] siwfreq 
 +[   51.070000] Set freq vap 0 stop send + 86238000 
 +[   51.080000] Set freq vap 0 stop send -86238000 
 +[   51.110000] Set wait done --86238000 
 +[   51.200000] Setting Max Stations:64 
 +[   51.230000] [DEBUG] vap-0(ath0):set SIOC80211NWID, 7 characters 
 +[   51.240000] 
 +[   51.240000]  DES SSID SET=URL IRL 
 +[   51.640000]  ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 
 +[   51.650000]  DEVICE IS DOWN ifname=ath0 
 +[   51.650000]  DEVICE IS DOWN ifname=ath0 
 +[   51.780000] Warning: node not in table 0x83b6f000 
 +[   51.960000] ar8216_read_status-3278: start netif_carrier_off for dev[eth0.1] vid[1] i[1] vlan_table[15] 
 +[   51.970000] ar8216_read_status-3278: start netif_carrier_off for dev[eth0.2] vid[2] i[2] vlan_table[49] 
 +[   51.980000] br-lan: port 1(eth0.1) entered disabled state 
 +[   52.010000] br-lan: port 2(eth0.2) entered disabled state 
 +[   52.130000] device ath0 entered promiscuous mode 
 +[   52.130000] br-lan: port 3(ath0) entered forwarding state 
 +[   52.140000] br-lan: port 3(ath0) entered forwarding state 
 +[   52.180000] Not supported in this vap 
 +[   52.190000] wlan_vap_create : enter. devhandle=0x86270380, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +[   52.200000] ieee80211_mbo_vattach:MBO Initialized 
 +[   52.210000] ieee80211_oce_vattach: OCE Initialized 
 +[   52.210000] wlan_vap_create : exit. devhandle=0x86270380, vap=0x83bd0000, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +[   52.220000] __ieee80211_smart_ant_init: Smart Antenna is not supported 
 +[   52.230000] VAP device ath02 created osifp: (83bb1b80) os_if: (83bd0000) 
 +[   52.300000] Switching to Tx Mode-0 
 +[   52.310000] Setting Max Stations:64 
 +[   52.340000] [DEBUG] vap-1(ath02):set SIOC80211NWID, 16 characters 
 +[   52.350000] 
 +[   52.350000]  DES SSID SET=zEQQGAEPiKmD5tba 
 +[   52.710000]  ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1 
 +[   52.720000]  DEVICE IS DOWN ifname=ath02 
 +[   52.720000]  DEVICE IS DOWN ifname=ath02 
 +[   52.850000] Warning: node not in table 0x83bca000 
 +[   52.930000] Not supported in this vap 
 +qcawifi: enable radio wifi1 
 +[   53.080000] [ol_ath_iw_setcountry][1817] *p=55, *(p+1)=53 
 +[   53.090000] isCountryCodeValid: EEPROM regdomain 0x0 
 +[   53.100000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 
 +[   53.100000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 
 +[   53.110000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 
 +[   53.120000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 
 +[   53.120000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 
 +[   53.130000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 
 +[   53.140000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 
 +[   53.150000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 
 +[   53.150000] Add VHT80 channel: 5210 
 +[   53.160000] Add VHT80 channel: 5290 
 +[   53.160000] Add VHT80 channel: 5530 
 +[   53.170000] Add VHT80 channel: 5610 
 +[   53.170000] Add VHT80 channel: 5690 
 +[   53.170000] Add VHT80 channel: 5775 
 +[   53.180000] Skipping VHT80 channel 5825 
 +[   53.180000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 
 +[   53.190000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 
 +[   53.200000] isCountryCodeValid: EEPROM regdomain 0x0 
 +[   53.210000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 
 +[   53.220000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 
 +[   53.220000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 
 +[   53.230000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 
 +[   53.240000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 
 +[   53.240000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 
 +[   53.250000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 
 +[   53.260000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 
 +[   53.270000] Add VHT80 channel: 5210 
 +[   53.270000] Add VHT80 channel: 5290 
 +[   53.270000] Add VHT80 channel: 5530 
 +[   53.280000] Add VHT80 channel: 5610 
 +[   53.280000] Add VHT80 channel: 5690 
 +[   53.290000] Add VHT80 channel: 5775 
 +[   53.290000] Skipping VHT80 channel 5825 
 +[   53.290000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 
 +[   53.300000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 
 +[   53.370000] set TXBF_SND_PERIOD: value 100 wmi_status 0 
 +[   53.400000]  Disconnect_timeout value entered:10 
 +[   53.410000]  reconfiguration_timeout value entered:60 
 +[   53.770000] wlan_vap_create : enter. devhandle=0x84600380, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +[   53.780000] send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 28:ee:52:4d:cf:2b: 
 +[   53.790000] ieee80211_mbo_vattach:MBO Initialized 
 +[   53.790000] ieee80211_oce_vattach: OCE Initialized 
 +[   53.800000] wlan_vap_create : exit. devhandle=0x84600380, vap=0x83420000, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +[   53.810000] __ieee80211_smart_ant_init: Smart Antenna is not supported 
 +[   53.810000] Enabling TX checksum bit for the vap ath1 features 4000 
 +[   53.820000] Enabling SG bit for the vap ath1 features 4000 
 +[   53.830000] Enabling SG bit for the vap ath1 features 4000 
 +[   53.830000] Enabling TSO bit for the vap ath1 features 4000 
 +[   53.840000] Enabling LRO bit for the vap ath1 features 4000 
 +[   53.850000] VAP device ath1 created osifp: (83bd8380) os_if: (83420000) 
 +[   53.860000] siwfreq 
 +[   53.870000] Set freq vap 0 stop send + 83420000 
 +[   53.870000] Set freq vap 0 stop send -83420000 
 +[   53.910000] Set wait done --83420000 
 +[   53.940000] [wifi1] FWLOG: [59709] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0xa10, 0x160, 0x10, 0x0 ) 
 +[   53.950000] [wifi1] FWLOG: [59709] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0x10, 0x0, 0x10, 0x12 ) 
 +[   53.960000] [wifi1] FWLOG: [59826] WAL_DBGID_PDEV_INFO_PRINT ( 0x16, 0xa10, 0x810, 0x10, 0x0 ) 
 +[   53.970000] [wifi1] FWLOG: [59826] WAL_DBGID_PDEV_INFO_PRINT ( 0x16, 0x10, 0x0, 0x10, 0x12 ) 
 +[   53.980000] [wifi1] FWLOG: [59861] WAL_DBGID_DEV_RESET ( 0xc01d, 0x483 ) 
 +[   54.060000] Setting Max Stations:64 
 +[   54.090000] [DEBUG] vap-0(ath1):set SIOC80211NWID, 7 characters 
 +[   54.100000] 
 +[   54.100000]  DES SSID SET=URL IRL 
 +[   54.160000] [acs] chan: 2 beacon RSSI 89 Noise FLoor -109 
 +[   54.160000] [acs] chan: 3 beacon RSSI 63 Noise FLoor -109 
 +[   54.170000] [acs] chan: 4 beacon RSSI 33 Noise FLoor -109 
 +[   54.170000] [acs] chan: 5 beacon RSSI 53 Noise FLoor -109 
 +[   54.180000] [acs] chan: 6 beacon RSSI 85 Noise FLoor -109 
 +[   54.190000] [acs] chan: 7 beacon RSSI 43 Noise FLoor -109 
 +[   54.190000] [acs] chan: 5 beacon RSSI 53 Noise FLoor -109 
 +[   54.200000] [acs] chan: 6 beacon RSSI 85 Noise FLoor -109 
 +[   54.200000] [acs] chan: 7 beacon RSSI 43 Noise FLoor -109 
 +[   54.210000] [acs] chan: 8 beacon RSSI 26 Noise FLoor -109 
 +[   54.210000] [acs] chan: 9 beacon RSSI 98 Noise FLoor -109 
 +[   54.220000] [acs] chan: 10 beacon RSSI 148 Noise FLoor -110 
 +[   54.230000] [acs] Best Channel Selected 8 rssi 26 nf -109 
 +[   54.290000] __ieee80211_smart_ant_init: Smart Antenna is not supported 
 +[   54.300000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 
 +[   54.310000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 
 +[   54.330000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 
 +[   54.340000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 
 +[   54.350000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 
 +[   54.730000]  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 
 +[   54.730000]  DEVICE IS DOWN ifname=ath1 
 +[   54.740000]  DEVICE IS DOWN ifname=ath1 
 +[   54.890000] Sending SCAN START cmd 
 +[   54.940000] [wifi1] FWLOG: [60554] WAL_DBGID_PDEV_INFO_PRINT ( 0xae, 0x0 ) 
 +[   54.950000] [wifi1] FWLOG: [60554] WAL_DBGID_PDEV_INFO_PRINT ( 0xae, 0x0 ) 
 +[   54.960000] [wifi1] FWLOG: [61417] WAL_DBGID_SECURITY_ENCR_EN (  ) 
 +[   54.960000] [wifi1] FWLOG: [61417] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) 
 +[   54.970000] [wifi1] FWLOG: [61450] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   55.180000] device ath1 entered promiscuous mode 
 +[   55.180000] br-lan: port 4(ath1) entered forwarding state 
 +[   55.190000] br-lan: port 4(ath1) entered forwarding state 
 +[   55.230000] wlan_vap_create : enter. devhandle=0x84600380, opmode=IEEE80211_M_HOSTAP, flags=0x1 
 +[   55.240000] send_vdev_create_cmd_non_tlv: ID = 1 Type = 1, Subtype = 0 VAP Addr = 2e:ee:52:4d:cf:2b: 
 +[   55.250000] ieee80211_mbo_vattach:MBO Initialized 
 +[   55.260000] ieee80211_oce_vattach: OCE Initialized 
 +[   55.260000] wlan_vap_create : exit. devhandle=0x84600380, vap=0x83480000, opmode=IEEE80211_M_HOSTAP, flags=0x1. 
 +[   55.270000] __ieee80211_smart_ant_init: Smart Antenna is not supported 
 +[   55.280000] Enabling TX checksum bit for the vap ath12 features 4000 
 +[   55.290000] Enabling SG bit for the vap ath12 features 4000 
 +[   55.290000] Enabling SG bit for the vap ath12 features 4000 
 +[   55.300000] Enabling TSO bit for the vap ath12 features 4000 
 +[   55.310000] Enabling LRO bit for the vap ath12 features 4000 
 +[   55.310000] VAP device ath12 created osifp: (83bda380) os_if: (83480000) 
 +[   55.400000] Setting Max Stations:64 
 +[   55.430000] [DEBUG] vap-1(ath12):set SIOC80211NWID, 16 characters 
 +[   55.430000] 
 +[   55.430000]  DES SSID SET=zEQQGAEPiKmD5tba 
 +[   55.800000]  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 
 +[   55.810000]  DEVICE IS DOWN ifname=ath12 
 +[   55.820000]  DEVICE IS DOWN ifname=ath12 
 +[   55.940000] osif_vap_init: Scan in progress.. Cancelling it. vap: 0x83480000 
 +[   55.950000] [wifi1] FWLOG: [61758] WAL channel change freq=5200, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   55.960000] [wifi1] FWLOG: [61937] WAL_DBGID_PDEV_INFO_PRINT ( 0xae, 0x0 ) 
 +[   55.970000] [wifi1] FWLOG: [61937] WAL_DBGID_PDEV_INFO_PRINT ( 0xae, 0x0 ) 
 +[   55.970000] [wifi1] FWLOG: [62073] WAL channel change freq=5220, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   55.980000] [wifi1] FWLOG: [62387] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   55.990000] [wifi1] FWLOG: [62521] WAL_DBGID_SECURITY_ENCR_EN (  ) 
 +[   56.000000] [wifi1] FWLOG: [62521] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 ) 
 +whc (repacd): do __repacd_add_vlan_interfaces network:lan vlan id:1 backhual_iface:wifi 
 +whc (repacd): 2g interfaces:ath02, 5g interfaces:ath12 
 +whc (repacd): plc interfaces: 
 +interface5g:ath12 
 +whc (repacd): ath12.1 does not exist, add it. 
 +[   56.790000] device ath12.1 entered promiscuous mode 
 +[   56.810000] device ath12 entered promiscuous mode 
 +[   56.820000] br-lan: port 5(ath12.1) entered forwarding state 
 +[   56.830000] br-lan: port 5(ath12.1) entered forwarding state 
 +interface2g:ath02 
 +whc (repacd): ath02.1 does not exist, add it. 
 +[   56.940000] [wifi1] FWLOG: [62701] WAL channel change freq=5745, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   56.950000] [wifi1] FWLOG: [63015] WAL channel change freq=5765, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   56.960000] [wifi1] FWLOG: [63330] WAL channel change freq=5785, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   56.970000] [wifi1] FWLOG: [63464] WHAL_ERROR_RESET_OFFSETCAL (  ) 
 +[   56.980000] [wifi1] FWLOG: [63474] WAL_DBGID_BB_WDOG_TRIGGERED ( 0xf7f2, 0x4000419, 0x0, 0x2 ) 
 +[   56.990000] [wifi1] FWLOG: [63474] WAL_DBGID_BB_WDOG_TRIGGERED ( 0x8000, 0x0 ) 
 +[   56.990000] [wifi1] FWLOG: [63474] WAL_DBGID_RdOrCrOtCtAgSrHgRdsSsAbFoFbFp ( 0x81848080, 0x80848080, 0x80808080, 0x8080 ) 
 +[   57.050000] device ath02.1 entered promiscuous mode 
 +[   57.070000] device ath02 entered promiscuous mode 
 +[   57.080000] br-lan: port 6(ath02.1) entered forwarding state 
 +[   57.080000] br-lan: port 6(ath02.1) entered forwarding state 
 +whc (repacd): do __repacd_add_vlan_interfaces network:lan vlan id:2 backhual_iface:wifi 
 +whc (repacd): 2g interfaces:ath02, 5g interfaces:ath12 
 +whc (repacd): plc interfaces: 
 +interface5g:ath12 
 +whc (repacd): ath12.2 does not exist, add it. 
 +[   57.390000] device ath12.2 entered promiscuous mode 
 +[   57.410000] br-lan: port 7(ath12.2) entered forwarding state 
 +[   57.420000] br-lan: port 7(ath12.2) entered forwarding state 
 +␛[1m[ vlan_set_device_state ] 069: --------------->Create VID='2' 
 +␛[0m 
 +interface2g:ath02 
 +whc (repacd): ath02.2 does not exist, add it. 
 +[   57.600000] device ath02.2 entered promiscuous mode 
 +[   57.620000] br-lan: port 8(ath02.2) entered forwarding state 
 +[   57.630000] br-lan: port 8(ath02.2) entered forwarding state 
 +[   57.650000] send_vdev_down_cmd_non_tlv for vap 0 
 +[   57.660000] ACS failed to derive the channel. So,selecting channel with least BSS 
 +[   57.660000] random channel is 40 
 +[   57.670000] ******** ACS report ******** 
 +[   57.670000]  Channel | BSS  | minrssi | maxrssi | NF | Ch load | spect load | sec_chan 
 +[   57.680000] --------------------------------------------------------------------- 
 +[   57.690000]  5180( 36)    4        6        43   -102                          0 
 +[   57.700000]  5200( 40)    0        0           -102                          1 
 +[   57.700000]  5220( 44)    0        0           -102                          1 
 +[   57.710000]  5240( 48)    0        0           -103                          1 
 +[   57.720000]  5745(149)    6       13        14   -103                          1 
 +[   57.730000]  5765(153)    0        0           -103                          1 
 +[   57.740000]  5785(157)    5       10        11   -104      23                    1 
 +[   57.750000]  5805(161)    0        0           -103                          1 
 +[   57.750000]  5825(165)    0        0           -104                          0 
 +[   57.760000] OL vap_start + 
 +[   57.770000] VDEV START 
 +[   57.770000] OL vap_start - 
 +[   57.770000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 
 +[   57.780000] OL vap_start + 
 +[   57.780000] VDEV START 
 +[   57.780000] OL vap_start - 
 +[   57.790000] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 
 +[   57.800000] ADDRCONF(NETDEV_CHANGE): ath12.2: link becomes ready 
 +␛[1m[ vlan_set_device_state ] 069: --------------->Create VID='2' 
 +␛[0m 
 +[   57.980000] ol_vdev_start_resp_ev for vap 0 (860b4000) 
 +[   57.980000] send_wmm_update_cmd_non_tlv: 
 +[   57.990000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 
 +[   57.990000] send_vdev_up_cmd_non_tlv for vap 0 
 +[   58.000000] Beacon mode set to staggered. Cannot enable FD 
 +[   58.000000] __ieee80211_smart_ant_init: Smart Antenna is not supported 
 +[   58.010000] ol_vdev_start_resp_ev for vap 1 (860b4000) 
 +[   58.020000] send_wmm_update_cmd_non_tlv: 
 +[   58.020000] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 
 +[   58.030000] send_vdev_up_cmd_non_tlv for vap 1 
 +[   58.030000] Beacon mode set to staggered. Cannot enable FD 
 +[   58.040000] [wifi1] FWLOG: [63644] WAL channel change freq=5805, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   58.050000] [wifi1] FWLOG: [63958] WAL channel change freq=5825, mode=0 flags=0 rx_ok=1 tx_ok=1 
 +[   58.060000] [wifi1] FWLOG: [64276] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) 
 +[   58.060000] [wifi1] FWLOG: [64276] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) 
 +[   58.070000] [wifi1] FWLOG: [64390] vap-0 VDEV_MGR_VDEV_START ( 0x1450, 0x2, 0x0, 0x0 ) 
 +[   58.080000] [wifi1] FWLOG: [64391] WAL channel change freq=5200, mode=10 flags=0 rx_ok=1 tx_ok=1 
 +whc (repacd): do __repacd_del_vlan_interfaces network:lan vlan id:1 backhual_iface:plc 
 +whc (repacd): 2g interfaces:, 5g interfaces: 
 +whc (repacd):  plc interfaces: 
 +whc (repacd): do __repacd_del_vlan_interfaces network:lan vlan id:2 backhual_iface:plc 
 +whc (repacd): 2g interfaces:, 5g interfaces: 
 +whc (repacd):  plc interfaces: 
 +whc (repacd): set wifi done flag 
 +whc (repacd): unlock whc_wifi_config_lock 
 +whc (repacd): get whc_wifi_config_lock 
 +whc (repacd): clear wifi_set_done flag 
 +whc (repacd): starting WHC auto-configuration 
 +whc (repacd): Managed network: lan 
 +=== ip addr del 192.168.68.1 dev br-lan start 
 +whc (repacd): Device type: AP 
 +[   58.980000] [wifi1] FWLOG: [64603] VDEV_MGR_VDEV_START_RESP ( 0x0 ) 
 +[   58.980000] [wifi1] FWLOG: [64604] vap-1 VDEV_MGR_VDEV_START ( 0x1450, 0x2, 0x0, 0x0 ) 
 +[   58.990000] [wifi1] FWLOG: [64626] VDEV_MGR_HP_START_TIME ( 0x0, 0x1450, 0x84d000 ) 
 +[   59.000000] [wifi1] FWLOG: [64626] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 ) 
 +[   59.010000] [wifi1] FWLOG: [64626] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) 
 +[   59.010000] [wifi1] FWLOG: [64626] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x1450, 0x0, 0x0 ) 
 +[   59.020000] [wifi1] FWLOG: [64626] VDEV_MGR_VDEV_START_RESP ( 0x0 ) 
 +[   59.030000] [wifi1] FWLOG: [64660] VDEV_MGR_HP_START_TIME ( 0x0, 0x1450, 0x866000 ) 
 +[   59.040000] [wifi1] FWLOG: [64660] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 ) 
 +[   59.040000] [wifi1] FWLOG: [64660] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 ) 
 +[   59.050000] [wifi1] FWLOG: [64660] VDEV_MGR_AP_TBTT_CONFIG ( 0x1, 0x1450, 0x0, 0x0 ) 
 +whc (repacd): Sysmode: Router 
 +whc (repacd): the guest network version of the device is latest, we do nothing(uci_revert_state wifi guest enable) 
 +␛[1m[ handle_vlan_if ] 238: socket ioctl handle vlan if error 19. 
 +␛[0m 
 +=== ip addr del 192.168.68.1 dev br-lan end 
 +␛[1m[ del_guest_eth ] 904: del_guest_eth-904:del guest eth eth0.591 
 +␛[0m 
 +[awn_get_lan_ip:366]: ioctl error 
 + 
 +sys_mode:Router 
 +iptv_enable:
 +[   60.650000] device eth0.1 left promiscuous mode 
 +[   60.660000] br-lan: port 1(eth0.1) entered disabled state 
 +[   60.680000] device eth0.1 entered promiscuous mode 
 +[   60.800000] device eth0.2 left promiscuous mode 
 +[   60.810000] br-lan: port 2(eth0.2) entered disabled state 
 +[   60.860000] device eth0.2 entered promiscuous mode 
 +[ 4063(lan)] [smartip_get_cfg 166] key:gw value:192.168.68.1 
 + 
 +[ 4063(lan)] [smartip_get_cfg 166] key:lanip value:192.168.68.1 
 + 
 +[ 4063(lan)] [smartip_get_cfg 166] key:lantype value:1 
 + 
 +[ 4063(lan)] [smartip_get_cfg 166] key:mask value:255.255.255.0
  
 +[   61.380000] work mode change to :AP
 +[   61.380000]
 +[   61.460000] get dev num:2
 +[   61.460000] statistics: SET_STA_DEVICE dev_name=eth0.1
 +[   61.470000] statistics: SET_STA_DEVICE dev_name=eth0.2
 +[   61.470000] backhaul sta dev num:2
 +whc (repacd): Using SON mode for GW Connected AP
 +[ 4063(lan)] [smartip_init_dhcp_hook_socket 2287] create dhcp hook success
 +
 +[   62.020000] eth0.1:eth0.2:ath0:ath1:ath2:ath05:ath15:ath25:ath03.1:ath13.1:ath23.1:ath02.1:ath12.1:ath22.1:ath04.1:ath14.1
 +leds: INFO: Event: power.on
 +[ 4063(lan)] [smartip_start_drop_dhcp_pkg 2173] start select dhcp package!
 +
 +[ 4063(lan)] [smartip_check_status_Router_mode 1712] new dnsServer is 0xc0a84401 0x0
 +
 +[ 4063(lan)] [smartip_notify_lan_update 1293] Notify the lan ip changed.
 +
 +mac:28-EE-52-4D-CF-28
 +1
 +conn-indicator: INFO: -- running --
 +conn-indicator: NOTE: BINDING state: -1 -> 3
 +conn-indicator: INFO: <30000307> Invoke led: conn[2]
 +leds: INFO: Event: conn.ap-lost
 +leds: INFO: Event: init.done
 +conn-indicator: NOTE: Mode changed: Unknown -> Router
 +[ 4063(lan)] [smartip_update_lanip 591] config IP:  ifconfig br-lan 192.168.68.1 netmask 255.255.255.0
 +
 +cap_mac:
 +1
 +conn-indicator: NOTE: Role changed: Unknown -> FAP
 +conn-indicator: ERR: [validate_dir] stat(/tmp/sync-server): No such file or directory
 +conn-indicator: ERR: Invalid directory: /tmp/sync-server
 +conn-indicator: ERR: Failed to watch /tmp/sync-server/mesh_dev_list
 +conn-indicator: ERR: Failed to allocate DEV_LIST
 +conn-indicator: NOTE: Network type: Unknown -> FAP
 +conn-indicator: INFO: <31330307> Invoke led: conn[1]
 +leds: INFO: Event: conn.offline
 +conn-indicator: NOTE: Connectivity changed: FAP.LOST(0x7) -> OFFLINE(0x1)
 +whc (repacd): __repacd_restart_dependencies: No changes; not res[   63.120000] ivalue value:tarting network stack...
 +whc (repacd): do __repacd_add_vlan_interfaces network:lan vlan id:1 backhual_iface:wifi
 +ME Pool succesfully initialized vaddr - 835e0000 paddr - 0
 +[   63.450000] num_elems = 1424 buf_size - 64 pool_size = 102528
 +[   63.460000] Enable MCAST_TO_UCAST
 +[ 4063(lan)] [smartip_update_lanip 602] route del default dev br-lan
 +
 +␛[1m[ wan_detect_handle_timeout ] 130: we are changing role now, reload network config boot[0].
 +␛[0m
 +[ 4063(lan)] [smartip_update_lanip 620] restart miniupnpd
 +
 +[ 4283(lan)] [smartip_call_hotplug_ip 1990] Send Message -- TYPE:lan, EVENT:UPDATE
 +
 +conn-indicator: ERR: [validate_dir] stat(/tmp/sync-server): No such file or directory
 +conn-indicator: ERR: Invalid directory: /tmp/sync-server
 +conn-indicator: ERR: Failed to watch /tmp/sync-server/mesh_dev_list
 +conn-indicator: ERR: Failed to allocate DEV_LIST
 +␛[1m[ handle_vlan_if ] 238: socket ioctl handle vlan if error 19.
 +␛[0m
 +␛[1m[ del_guest_eth ] 904: del_guest_eth-904:del guest eth eth0.591
 +␛[0m
 +whc (repacd): 2g interfaces:ath02, 5g interfaces:ath12
 +conn-indicator: ERR: [validate_dir] stat(/tmp/sync-server): No such file or directory
 +conn-indicator: ERR: Invalid directory: /tmp/sync-server
 +conn-indicator: ERR: Failed to watch /tmp/sync-server/mesh_dev_list
 +conn-indicator: ERR: Failed to allocate DEV_LIST
 +whc (repacd): plc interfaces:
 +interface5g:ath12
 +whc (repacd): ath12.1 already existed, do nothing.
 +interface2g:ath02
 +sys_mode:Router
 +iptv_enable:0
 +conn-indicator: ERR: [validate_dir] stat(/tmp/sync-server): No such file or directory
 +conn-indicator: ERR: Invalid directory: /tmp/sync-server
 +conn-indicator: ERR: Failed to watch /tmp/sync-server/mesh_dev_list
 +conn-indicator: ERR: Failed to allocate DEV_LIST
 +[ 4476(lan)] [smartip_call_hotplug_ip 1990] Send Message -- TYPE:lan, EVENT:FAPIPUPDATE
 +
 +whc (repacd): ath02.1 already existed, do nothing.
 +whc (repacd): do __repacd_add_vlan_interfaces network:lan vlan id:2 backhual_iface:wifi
 +conn-indicator: ERR: [validate_dir] stat(/tmp/sync-server): No such file or directory
 +conn-indicator: ERR: Invalid directory: /tmp/sync-server
 +conn-indicator: ERR: Failed to watch /tmp/sync-server/mesh_dev_list
 +conn-indicator: ERR: Failed to allocate DEV_LIST
 +[   67.060000] ar8216_read_status:dev[switch0] oldstatus[0] status[32]
 +[   67.070000] ar8216_read_status-3245: start netif_carrier_on for dev[eth0.2] vid[2] i[1] vlan_table[33]
 +[   67.080000] br-wan: port 2(eth0.2) entered forwarding state
 +[   67.090000] br-wan: port 2(eth0.2) entered forwarding state
 +[   67.260000] ADDRCONF(NETDEV_CHANGE): br-wan: link becomes ready
 +[   67.490000] [ath0] Band steering events being sent to PID:4553
 +[   67.640000] [ath1] Band steering events being sent to PID:4553
 +[   67.640000] [ath0] Band steering events being sent to PID:4553
 +[   67.830000] [ath1] Band steering events being sent to PID:4553
 +conn-indicator: ERR: [validate_dir] stat(/tmp/sync-server): No such file or directory
 +conn-indicator: ERR: Invalid directory: /tmp/sync-server
 +conn-indicator: ERR: Failed to watch /tmp/sync-server/mesh_dev_list
 +conn-indicator: ERR: Failed to allocate DEV_LIST
 +[   68.110000] mode:0
 +[   68.370000] [ath0] Band steering events being sent to PID:4553
 +[   68.510000] [ath1] Band steering events being sent to PID:4553
 +whc (repacd): 2g interfaces:ath02, 5g interfaces:ath12
 +whc (repacd): plc interfaces:
 +Ipv6 Firewall config trigger stop!
 +interface5g:ath12
 +conn-indicator: ERR: [validate_dir] stat(/tmp/sync-server): No such file or directory
 +conn-indicator: ERR: Invalid directory: /tmp/sync-server
 +conn-indicator: ERR: Failed to watch /tmp/sync-server/mesh_dev_list
 +conn-indicator: ERR: Failed to allocate DEV_LIST
 +conn-indicator: INFO: <31330301> link event: br-wan.up
 +[   69.450000] br-wan: port 2(eth0.2) entered disabled state
 +[   69.450000] br-wan: port 2(eth0.2) entered forwarding state
 +[   69.460000] br-wan: port 2(eth0.2) entered forwarding state
 +whc (repacd): ath12.2 already existed, do nothing.
 +interface2g:ath02
 +conn-indicator: ERR: [validate_dir] stat(/tmp/sync-server): No such file or directory
 +conn-indicator: ERR: Invalid directory: /tmp/sync-server
 +conn-indicator: ERR: Failed to watch /tmp/sync-server/mesh_dev_list
 +conn-indicator: ERR: Failed to allocate DEV_LIST
 +whc (repacd): ath02.2 already existed, do nothing.
 +conn-indicator: ERR: [file_md5sum] fopen(/tmp/sync-server/mesh_dev_list): No such file or directory
 +json_object_from_file: error reading file /tmp/sync-server/mesh_dev_list: No such file or directory
 +conn-indicator: ERR: [update_devlist] Failed to parse /tmp/sync-server/mesh_dev_list: No such file or directory
 +IPConflict2 mask:24 lan_addr:192.168.68.1 mask_str:255.255.255.0
 +IPConflict2 mask:24
 +IPConflict2 old_mask:255.255.255.0 old_ip:192.168.68.1
 +qos_v2 stop
 +/lib/sync-server/scripts/detect-re:34:  error open file failed:/var/run/record_devid
 +/lib/sync-server/scripts/detect-re:34:  error open file failed:/tmp/sync-server/mesh_dev_list
 +/lib/sync-server/scripts/detect-re:56:  error: record_devid or mesh_dev_list is nil, do nothing
 +[ 4063(lan)] [smartip_update_lanip 632] restart domain_login
 +
 +*****/tmp/ipv6_firewall/op_rule_id file not found, create it.*****
 +========= MODE: cloud_awn_update begin ==========
 +mode: AP
 +whc (repacd): do __repacd_del_vlan_interfaces network:lan vlan id:1 backhual_iface:plc
 +--------->exiting qos
 +[ 4063(lan)] [smartip_start_process 364] start udhcpd
 +
 +========= MODE: update awn feature info to cloud ==========
 +whc (repacd): 2g interfaces:, 5g interfaces:
 +whc (repacd):  plc interfaces:
 +whc (repacd): do __repacd_del_vlan_interfaces network:lan vlan id:2 backhual_iface:plc
 +whc (repacd): 2g interfaces:, 5g interfaces:
 +whc (repacd):  plc interfaces:
 +whc (repacd): set wifi done flag
 +whc (repacd): unlock whc_wifi_config_lock
 +manager permission has been set, no need to set again
 +qos_v2 start
 +timestamp 1647158400
 +M3.2.0/02:00
 +timestamp 1667721600
 +M11.1.0/02:00
 +GMT+06:00TMG,M3.2.0/02:00,M11.1.0/02:00
 +/lib/sync-server/scripts/probe:228:     error open file failed:/var/run/record_devid
 +/lib/sync-server/scripts/probe:729:     to_get_info 80190A3005E668E68ECC07DEE54D33E91E0B80D7 first, clean old record data
 +/lib/sync-server/scripts/probe:733:     to_get_info 80190A3005E668E68ECC07DEE54D33E91E0B80D7
 +/lib/sync-server/scripts/probe:842:     to_get_info: ["192.168.68.1","1"]
 +/lib/sync-server/scripts/get-info:84:    Total 1 devices need to get info
 +sync_get_info begin()
 +sync_get_compatible_info
 +sync_get_info end()
 +[   91.920000] Ebtables v2.0 unregistered
 +error open file failed:/var/run/record_devid
 +error open file failed:/var/run/record_op
 +error open file failed:/var/run/record_cfg
 +error open file failed:/var/run/record_component_router_owner
 +error open file failed:/var/run/record_component_router_user
 +error open file failed:/var/run/record_component_ap_owner
 +error open file failed:/var/run/record_component_ap_user
 +error open file failed:/var/run/record_opcode_cfg
 +error open file failed:/var/run/record_devid
 +error open file failed:/tmp/check_dev
 +error open file failed:/var/run/record_component_whole
 +update_compitable_list can't support IOT
 +/lib/sync-server/scripts/get-info:92:   Total 1 devices were got info successfully
 +error open file failed:/var/run/lookup_cfg
 +there is no iot fap
 +[ 6318] [init 340] init nds:0x0
 +
 +[ 6318] [dns_proxy_execFormatCmd 88] cmd: nat del dns
 +
 +error open file failed:/var/run/lookup_op
 +leds: INFO: Switch.on
 +[ 6318] [dns_proxy_execFormatCmd 88] cmd: nat add dns { 192.168.68.1 0.0.0.0 }
 +
 +check_opcode_iot
 +fap has no iot
 +[ 6318] [dns_proxy_execFormatCmd 88] cmd: nat add dns { 0.0.0.0 0.0.0.0 }
 +
 +/lib/sync-server/scripts/get-info:104:   Total 1 devices need to get cfg
 +[ 6318] [main 481] init done, now do uloop_run
 +
 +leds: WARN: System time has not been synchronized yet
 +req:    {"method":"getDeviceUserInfo","params":{"deviceId":"80190A3005E668E68ECC07DEE54D33E91E0B80D7"}}
 +smart_home_schedule reload_service
 +maclist_smart_home:
 +#### no schedule client found in blacklist config ####
 +Call smart_home_schedule and add it to crontabs
 +start crond...
 +re:     -3002
 +get_deviceUserInfo: request error
 + ======= ERROR: get cloudUserName from cloud failed ======
 +update_schedule_runtime_file get maclist:[]
 +create "/var/run/schedule_client"
 +append maclist:[]
 +read old_maclist:null
 +old_maclist is nil, just write
 +req:    {"method":"getDeviceUserInfo","params":{"deviceId":"80190A3005E668E68ECC07DEE54D33E91E0B80D7"}}
 +guest-eth: guest-eth start vlan_enable:1, vlan_id:591
 +[  108.250000] ar8216_read_status:dev[switch0] oldstatus[0] status[32]
 +re:     -3002
 +get_deviceUserInfo: request error
 + ======= ERROR: get cloudUserName from cloud failed ======
 +mac:28-EE-52-4D-CF-28
 +role:AP
 +update fap: 28:EE:52:4D:CF:28
 +req:    {"method":"getDeviceUserInfo","params":{"deviceId":"80190A3005E668E68ECC07DEE54D33E91E0B80D7"}}
 +DEBUG:[main:216]: Create child process ok, record the pid in file.
 +qos_v2 start
 +sync_get_cfg begin()
 +sync_get_cfg end()
 +error open file failed:/tmp/merge_cfgs
 +/lib/sync-server/scripts/get-info:106:  Total 1 devices were got cfg successfully
 +/lib/sync-server/scripts/get-info:121:   merge_cfgs is nil , don't update user_config.
 + Total 1 devices need to update dev list
 +re:     -3002
 +get_deviceUserInfo: request error
 + ======= ERROR: get cloudUserName from cloud failed ======
 +Total 1 devices were update dev list successfully
 +notify_check_client: current time is 1600435970
 +client triggers is opened.
 +req:    {"method":"getDeviceUserInfo","params":{"deviceId":"80190A3005E668E68ECC07DEE54D33E91E0B80D7"}}
 +re:     -3002
 +get_deviceUserInfo: request error
 + ======= ERROR: get cloudUserName from cloud failed ======
 +</nowiki>
 +</WRAP>\\
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
Line 340: Line 1183:
  
 ===== Notes ===== ===== Notes =====
-//Space for additional notes, links to forum threads or other resources.// 
  
-  * ...+  * Forum thread: https://forum.openwrt.org/t/openwrt-support-for-deco-s4/119579
  
 ===== Tags ===== ===== Tags =====
  • Last modified: 2024/04/06 16:36
  • by naf