Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:tp-link:archer_mr200 [2024/02/12 11:13] – external edit toh:tp-link:archer_mr200 [2024/09/03 07:40] – [Installation] frollic
Line 61: Line 61:
      
 **Flashing OpenWrt**  **Flashing OpenWrt** 
 +  * The router now will flash the file to its chip starting at address 0x00000000, in case you are generating your own custom firmware image, the file should include the TP-Link bootloader, the creation process is described further down.
   * Turn on the device while pushing the WPS button until the WPS indicator lights up. The router is now ready to accept the firmware via the TFTP client set up in the computer. **Remember that the file name must exactly be the one mentioned above, since the router is looking specifically for it**.   * Turn on the device while pushing the WPS button until the WPS indicator lights up. The router is now ready to accept the firmware via the TFTP client set up in the computer. **Remember that the file name must exactly be the one mentioned above, since the router is looking specifically for it**.
-  * The router now will flash the file to its chip from address 0x00000000, note that in case you are making your own custom firmware, the file start should be the TP-Link bootloader, process on how to make your own custom firmware is explained below. 
   * Wait until the router restarts and boots up, change the LAN settings in your computer to DHCP (automatically assign IP), and open //192.168.1.1// IP in your browser, you should see the LuCl Configuration Interface pop up, afterwards, continue the setup of the router using the guidance provided in the web interface.   * Wait until the router restarts and boots up, change the LAN settings in your computer to DHCP (automatically assign IP), and open //192.168.1.1// IP in your browser, you should see the LuCl Configuration Interface pop up, afterwards, continue the setup of the router using the guidance provided in the web interface.
  
  • Last modified: 2024/09/03 07:44
  • by frollic