TP-Link Archer C8

AC1750 Router

→ CURRENTLY UNSUPPORTED DEVICE ←

OEM Source Code: gpl_archer_c8_v1.tar.bz2

Version CPU Ram Flash Network Wireless NIC Wireless Standard USB Serial JTag ADSL2+ Modem
1.0 BCM4708@800MHz, Dual-Core 128 MB 16 MB 5x 1000mbps BCM4360 5GHz / BCM4331 2.4GHz a/b/g/n/ac YES (1 x 2.0, 1 x 3.0) YES ? NO

→ port.serial Pin: TX, RX, GND, VCC (3.3v, *don't connect!*) Speed: 115200 8N1

Access to CFE by pressing CTRL+C during boot. Once it displays “CFE>”, you can enter CFE commands.

CFE on TP-Link archer c8 is limited (no webui).

Digital core power voltage set to 0.9375V Decompressing...done Digital core power voltage set to 0.9375V SHMOO VER 1.13 PKID07DC06011801080000000000001A103F01000000 S30040253 00001B50 RDLYW0 00000004 RDENW0 00000038 RDQSW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 01 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 02 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 03 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 04 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 05 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 06 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 07 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 08 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 09 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 10 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++ 11 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 12 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 13 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 14 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 15 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ PW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 01 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 02 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 03 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 04 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 05 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 06 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 07 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++ 08 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 09 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 10 +-+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 11 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 12 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 13 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 14 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 15 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ NW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 01 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 02 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 03 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 04 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 05 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++ 06 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++ 07 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++ 08 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++ 09 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++ 10 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++ 11 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 12 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 13 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++ 14 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++ 15 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++ WRDQW0 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 +++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----- 01 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++- 02 +++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++-- 03 +++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++-- 04 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------- 05 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++- 06 +++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----- 07 ++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-+-- 08 +++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------ 09 ++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++---- 10 ++++++++++++++++++++++++++++X+++++++++++++++++++++++++++-------- 11 +++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----- 12 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------- 13 ++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++---- 14 +++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----- 15 ++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++--- WRDMW0 00000030 WRDMW0 00000029 ADDR 0000000000111111111122222222223333333333444444444455555555556666 0123456789012345678901234567890123456789012345678901234567890123 00 +++++++++++++++++++++++++++S+++X++++++++++++++++++++++++++++++++ Decompressing...done CFE version 6.37.14.62 (r437318) based on BBP 1.0.37 for BCM947XX (32bit,SP,) Build Date: Fri Sep 5 13:54:42 CST 2014 (root@localhost.localdomain) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 262144(0x40000) DDR Clock: 533 MHz Info: DDR frequency set from clkfreq=800,*533* et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.62 (r437318) CPU type 0x0: 800MHz Tot mem: 131072 KBytes CFE mem: 0x00F00000 - 0x00FCC810 (837648) Data: 0x00F414A8 - 0x00F418F4 (1100) BSS: 0x00F41900 - 0x00F66810 (151312) Heap: 0x00F66810 - 0x00FCA810 (409600) Stack: 0x00FCA810 - 0x00FCC810 (8192) Text: 0x00F00000 - 0x00F396D4 (235220) Device eth0: hwaddr 14-CC-20-3D-41-82, ipaddr 192.168.0.1, mask 255.255.255.0 gateway not set, nameserver not set Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .... 4240800 bytes read Entry at 0x00008000 Closing network. Starting program at 0x00008000 console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550 brd: module loaded loop: module loaded pflash: found no supported devices bcmsflash: squash filesystem found at block 36 Creating 5 MTD partitions on "bcmsflash": 0x000000000000-0x000000040000 : "boot" 0x000000040000-0x000000240000 : "linux" 0x000000240000-0x000000ee0000 : "rootfs" 0x000000fe0000-0x000000ff0000 : "radio" 0x000000ff0000-0x000001000000 : "nvram" nflash: found no supported devices PPP generic driver version 2.4.2 NET: Registered protocol family 24 usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: irq 111, io mem 0x18021000 ehci_hcd 0000:00:0b.1: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 111, io mem 0x18022000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected xhci_hcd 0000:00:0c.0: xHCI Host Controller xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:00:0c.0: irq 112, io mem 0x18023000 xhci_hcd 0000:00:0c.0: Failed to enable MSI-X xhci_hcd 0000:00:0c.0: failed to allocate MSI entry usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected nf_conntrack version 0.5.0 (1960 buckets, 7840 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012 brcmnand: found no supported devices VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing init memory: 216K init started: BusyBox v1.01 (2014.09.05-06:05+0000) multi-call binary This board use 2.6.36 ctf: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint et_module_init: passivemode set to 0x0 et_module_init: txworkq set to 0x0 et_module_init: et_txq_thresh set to 0x400 eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.62 (r437318) xt_time: kernel timezone is -0000 u32 classifier Actions configured L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 PPTP driver version 0.8.3 (none) armv7l #1 SMP PREEMPT Fri Sep 5 14:02:09 CST 2014 (none) (none) login: device eth0.1 entered promiscuous mode device eth0 entered promiscuous mode br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state Attempt to kill tasklet from interrupt device eth0 left promiscuous mode br0: port 1(eth0.1) entering forwarding state device eth0 entered promiscuous mode br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state device eth0 left promiscuous mode br0: port 1(eth0.1) entering forwarding state device eth0 entered promiscuous mode br0: port 1(eth0.1) entering forwarding state br0: port 1(eth0.1) entering forwarding state ====>>>>DHCP start.dhcpc.c,dhcpcStart,1100 ====>>>>DHCP end.dhcpc.c,dhcpcStart,1164 nf_conntrack_rtsp v0.6.21 loading nf_nat_rtsp v0.6.21 loading wl_module_init: passivemode set to 0x0 wl_module_init: txworkq set to 0x0 PCI: Enabling device 0001:01:00.0 (0140 -> 0142) srom rev:0 eth1: Broadcom BCM4331 802.11 Wireless Controller 6.37.14.93 (r469350 WLTEST) srom rev:0 eth2: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.93 (r469350 WLTEST) device eth1 entered promiscuous mode br0: port 2(eth1) entering forwarding state br0: port 2(eth1) entering forwarding state ====>>>>start: eth1. device eth2 entered promiscuous mode br0: port 3(eth2) entering forwarding state br0: port 3(eth2) entering forwarding state ====>>>>start: eth2. acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0x1006 acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0xe09b ====>>>>task[5126]: start ok! ====>>>>startup: start ok! kcg 323 :GPL NetUSB up! Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. kc 90 : run_telnetDBGDServer start kc 227 : init_DebugD end INFO17F1: NetUSB 1.02.47, 00020624 : Feb 12 2014 10:44:29 INFO17F3: AUTH ISOC INFO17F4: filterAudio usbcore: registered new interface driver KC NetUSB General Driver INFO013F: init proc : PAGE_SIZE 4096 INFO16C5: infomap bf769a14 INFO16C8: sleep to wait br0 to wake up INFO02D0: use dev Name br0 INFO16D1: sleep to wait br0 end. INFO16EA: UDP_BROAD 7437 tcpPort:20005 INFO02D0: use dev Name br0 INFO15D1: tcpConnector() started... IPv6 over IPv4 tunneling driver INFO14AE: Bind to br0 Jan 1 00:03:57 login[424]: root login on `ttyS0' BusyBox v1.01 (2014.09.05-06:05+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. #


Default login: root Password: sohoadmin

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2019/10/16 11:34
  • by tmomas