Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:t-com:spw724vtypb [2015/06/10 11:56] – [Hardware] RAM: added 128MB according datasheet tmomastoh:t-com:spw724vtypb [2018/04/16 19:52] – Tag section + OpenWrt support status section + infobox added tmomas
Line 1: Line 1:
 +====== T-Com Speedport W724V Typ B ======
  
 +{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}
 +
 +===== OpenWrt support status =====
 +
 +<color red>**Not supported.**</color>
 +
 +===== Hardware =====
 +
 +^ SOC | 1 | XWAY™ VRX288 PSB 80920 EL | lantiq |
 +^ Flash | 1 | 1Gbit MX30LF1G08AA | MXIC |
 +^ RAM | 2 | 128MB NT5TU128M8GE-AC | NANYA |
 +^ WLAN B/G/N | 1 | BCM43222KFBG | broadcom |
 +^ WLAN AC | 1 | BCM4360KMLG | broadcom |
 +^ LAN | 3 | PEF7071V V1.5 | lantiq |
 +^ Dect | 1 | COSIC™-Modem PMB9643V V2.0 | lantiq |
 +^ Modem | 1 | XWAY™ VRX208 PSB 80190 V V1.1 | lantiq |
 +^ Analog telephone ports | 2 | XWAY™ SLIC120 PEF 42068 V V1.2 | lantiq |
 +^ USB | YES |
 +^ Serial Port | YES |
 +^ JTAG | ? |
 +^ Power | 12 VDC, 2.5 A |
 +
 +===== Pictures =====
 +
 +I have made several more photos of the router's mainboard. See here: [[?do=media&ns=media:t-com|Pictures of T-Com devices]]
 +
 +{{media:t-com:speedport_w724v_front_4_view.jpg?400|}}
 +{{media:t-com:speedport_w724v_back_4_view.jpg?400|}}
 +
 +===== enable UART ROM boot =====
 +
 +As most of the other Latiq devices, this one has a resistor to set the bootmode, too. The resistor to unsolder is R138. It is on the back of the board under the big shielding.
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>unsupported lantiq vrx288}}
  • Last modified: 2018/10/27 11:58
  • by tmomas