Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:t-com:spw724vtypb [2015/03/08 08:00] – angelegt ricolatoh:t-com:spw724vtypb [2018/04/16 19:52] – Tag section + OpenWrt support status section + infobox added tmomas
Line 1: Line 1:
 +====== T-Com Speedport W724V Typ B ======
  
 +{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}
 +
 +===== OpenWrt support status =====
 +
 +<color red>**Not supported.**</color>
 +
 +===== Hardware =====
 +
 +^ SOC | 1 | XWAY™ VRX288 PSB 80920 EL | lantiq |
 +^ Flash | 1 | 1Gbit MX30LF1G08AA | MXIC |
 +^ RAM | 2 | 128MB NT5TU128M8GE-AC | NANYA |
 +^ WLAN B/G/N | 1 | BCM43222KFBG | broadcom |
 +^ WLAN AC | 1 | BCM4360KMLG | broadcom |
 +^ LAN | 3 | PEF7071V V1.5 | lantiq |
 +^ Dect | 1 | COSIC™-Modem PMB9643V V2.0 | lantiq |
 +^ Modem | 1 | XWAY™ VRX208 PSB 80190 V V1.1 | lantiq |
 +^ Analog telephone ports | 2 | XWAY™ SLIC120 PEF 42068 V V1.2 | lantiq |
 +^ USB | YES |
 +^ Serial Port | YES |
 +^ JTAG | ? |
 +^ Power | 12 VDC, 2.5 A |
 +
 +===== Pictures =====
 +
 +I have made several more photos of the router's mainboard. See here: [[?do=media&ns=media:t-com|Pictures of T-Com devices]]
 +
 +{{media:t-com:speedport_w724v_front_4_view.jpg?400|}}
 +{{media:t-com:speedport_w724v_back_4_view.jpg?400|}}
 +
 +===== enable UART ROM boot =====
 +
 +As most of the other Latiq devices, this one has a resistor to set the bootmode, too. The resistor to unsolder is R138. It is on the back of the board under the big shielding.
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>unsupported lantiq vrx288}}
  • Last modified: 2018/10/27 11:58
  • by tmomas