Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:t-com:spw701v [2018/02/17 19:03] – ↷ Links adapted because of a move operation toh:t-com:spw701v [2018/06/02 07:52] – non working links removed tmomas
Line 1: Line 1:
- 
- 
- 
 ====== T-Com Speedport W701V ====== ====== T-Com Speedport W701V ======
  
-===== Hardware ===== +===== Supported Versions ===== 
- +---- datatable ---- 
-^ SoC | [[doc/hardware/soc/soc.ar7|ar7]] | +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid 
-^ CPU | TNETD7200ZDW (AR7) @211Mhz | +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data 
-^ Flash | 8 MB | +align   : c,c,c,c,c,c,c 
-^ RAM | 32 MB | +filter  : Model=Speedport W 701V 
-^ USB | No | +----
-^ WLAN | TNETW1350A | +
-^ Ethernet Switch | Infineon ADM6996LC | +
-^ Serial Port | Yes | +
-^ JTAG | ? | +
-^ Power | 12 volts 1000 mA | +
-^ Specials | S0-port, 2 analog telephone ports |+
  
-===== Status ===== +==== Status ==== 
-Tested [[https://downloads.openwrt.org/barrier_breaker/14.07/ar7/generic/openwrt-EVA-3.10-squashfs.bin|Barrier Breaker 14.07]].+Tested [[https://downloads.openwrt.org/barrier_breaker/14.07/ar7/generic/openwrt-EVA-3.10-squashfs.bin|Barrier Breaker 14.07]]:
  
-  * Boot: [[#barrier_breaker_1407|working]], be patient -> Busybox working+  * Boot: working, be patient -> Busybox working
   * Wifi: not working due -> acx_mac80211: Unknown symbol ieee80211_queue_stopped (err 0)   * Wifi: not working due -> acx_mac80211: Unknown symbol ieee80211_queue_stopped (err 0)
   * ADSL: ???   * ADSL: ???
Line 29: Line 20:
   * LuCI: working   * LuCI: working
  
-Tested with latest OpenWRT stable release, Attitude Adjustement 12.09 using the image [[http://downloads.openwrt.org/attitude_adjustment/12.09/ar7/generic/openwrt-EVA-3.3-squashfs.bin|openwrt-EVA-3.3-squashfs.bin]].+Tested [[http://downloads.openwrt.org/attitude_adjustment/12.09/ar7/generic/openwrt-EVA-3.3-squashfs.bin|Attitude Adjustment 12.09]]:
  
-  * Boot: [[#attitude_adjustement_1209|working]], be patient -> Busybox working+  * Boot: working, be patient -> Busybox working
   * Wifi: no boot errors -> not working, <del>loading acx-mac80211 freezes the router</del> (chip: TNETW1350A, it's a chip with features somewhere between the supported TNETW1150 and the TNETW1450))   * Wifi: no boot errors -> not working, <del>loading acx-mac80211 freezes the router</del> (chip: TNETW1350A, it's a chip with features somewhere between the supported TNETW1150 and the TNETW1450))
   * ADSL: working   * ADSL: working
Line 38: Line 29:
   * Serial Port: working   * Serial Port: working
   * LuCI: working   * LuCI: working
-===== Bootloader =====+ 
 + 
 +===== Hardware Highlights ===== 
 +---- datatable ---- 
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,
 +filter  : Model=Speedport W 701V 
 +---- 
 + 
 + 
 +===== Installation ===== 
 +---- datatable ---- 
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url 
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock 
 +align   : l,c,c 
 +filter  : Model=Speedport W 701V 
 +---- 
 + 
 +==== Bootloader ====
 The bootloader is ADAM2 which provides a console on the serial port and allows flashing via FTP.  The W701V's bootloader's default IP address is 192.168.178.1, you should be able to ping it on that address a second or two after the device is rebooted.  If not reset the device back to it's defaults using the reset button on the back (see tcom's site for info on how to do this).  My router came with a very recent edition, v1.203, from February 2007. The bootloader is ADAM2 which provides a console on the serial port and allows flashing via FTP.  The W701V's bootloader's default IP address is 192.168.178.1, you should be able to ping it on that address a second or two after the device is rebooted.  If not reset the device back to it's defaults using the reset button on the back (see tcom's site for info on how to do this).  My router came with a very recent edition, v1.203, from February 2007.
 +
 +
 +===== Hardware =====
 +==== Info ====
 +^ SoC               | [[docs:techref:hardware:soc:soc.ar7|ar7]]   |
 +^ CPU               | TNETD7200ZDW (AR7) @211MHz                  |
 +^ Flash             | 8 MB                                        |
 +^ RAM               | 32 MB                                       |
 +^ USB               | No                                          |
 +^ WLAN              | TNETW1350A                                  |
 +^ Ethernet Switch   | Infineon ADM6996LC                          |
 +^ Serial Port       | Yes                                         |
 +^ JTAG              | ?                                           |
 +^ Power             | 12 volts 1000 mA                            |
 +^ Specials          | S0-port, 2 analog telephone ports           |
 +
  
 ==== Photos ==== ==== Photos ====
-http://www.hydraservices.com/files/t-com_speedport-w701v/pcb1.jpg+[[http://www.hydraservices.com/files/t-com_speedport-w701v/pcb1.jpg]]
  
-http://www.hydraservices.com/files/t-com_speedport-w701v/pcb2.jpg+[[http://www.hydraservices.com/files/t-com_speedport-w701v/pcb2.jpg]]
  
 ==== Serial Port ==== ==== Serial Port ====
-It has a 3.3v serial port to the lower right of the CPU, near the crystal and the large capacitor.  The PCB on my router didn't have a pin header/pin strip attached to it so I bought a pin strip from Maplin Electronics for £0.79p and soldered it carefully to the back of the PCB  I then attached my serial port adaptor (see the Addontech ARM8100 page on this wiki for circuit diagram, note the different order of RX and TX signals on the router's pin serial port) to the pin header and to my pc.+It has a 3.3v serial port to the lower right of the CPU, near the crystal and the large capacitor. The PCB on my router didn't have a pin header/pin strip attached to it so I bought a pin strip from Maplin Electronics for £0.79p and soldered it carefully to the back of the PCBI then attached my serial port adaptor (see the Addontech ARM8100 page on this wiki for circuit diagram, note the different order of RX and TX signals on the router's pin serial port) to the pin header and to my pc.
  
 The general location of the port and it's pin-out is as follows: The general location of the port and it's pin-out is as follows:
Line 137: Line 163:
 </code> </code>
  
- +===== System info =====
-==== Boot log from old firmware ==== +
-<code> +
-(AVM) EVA Revision: 1.190 Version: 1190 +
-(C) Copyright 2005 AVM Date: Nov 15 2006 Time: 16:53:42 (0) 2 0-11111 +
-[FLASH:] SPANSION Top-MirrorBit-Flash 8MB 32 Bytes WriteBuffer +
-[FLASH:](Eraseregion [0] 127 sectors a 64kB) +
-[FLASH:](Eraseregion [1] 8 sectors a 8kB) +
-[SYSTEM:] OHIO on 211MHz/125MHz +
-Eva_AVM >AVM decompress Kernel: +
-............done +
-start kernel +
-[ohio_pre_init] System Clk = 62500000 Hz               Linux version 2.6.13.1-ohio (jpluschke@EmbeddedVM) (gcc version 3.4.3) #3 Thu Feb 7 +
-YAMON MEMORY DESCRIPTOR dump: +
-prom_memsize = 0x02000000 +
-memsize=32 MByte +
-prom_flashsize = 0x00800000 +
-flashsize=8 MByte +
-&_end=0x9420aec8 PFN_ALIGN(&_end)=0x9420b000 CPHYSADDR(PFN_ALIGN(&_end))=0x1420b000 memsize=0x2000000 +
-[0,941e4fc0]: base size type +
-[0,941e4fcc]: base size type +
-prom_memsize = 0x02000000 +
-memsize=32 MByte +
-prom_flashsize = 0x00800000 +
-flashsize=8 MByte +
-&_end=0x9420aec8 PFN_ALIGN(&_end)=0x9420b000 CPHYSADDR(PFN_ALIGN(&_end))=0x1420b000 memsize=0x2000000 +
-CPU revision is: 00018448 +
-ohio_setup+0x0/0x100 +
-[ohio_clk_init]: dsl xtal 35328000Hz lan xtal 25000000Hz +
-[ohio_gpio_init] +
-Determined physical RAM map: +
- memory: 0020b000 @ 14000000 (reserved) +
- memory: 01df5000 @ 1420b000 (usable) +
-On node 0 totalpages: 8192 +
-[alloc_node_mem_map] reduce size from 2883616 Bytes to  262176 Bytes +
-[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x9420e000-0x9424e020 +
-[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93f8e000-0x9424e020 +
-  DMA zone: 8192 pages, LIFO batch:3 +
-  Normal zone: 0 pages, LIFO batch:1 +
-  HighMem zone: 0 pages, LIFO batch:1 +
-Built 1 zonelists +
-Kernel command line: idle=4  console=ttyS0,38400n8r +
-[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_generic, 0x30) +
-Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. +
-Primary data cache 8kB, 4-way, linesize 16 bytes. +
-Synthesized TLB refill handler (20 instructions). Base=0x941e2734 +
-TLB synthesizer field overflow (simm) +
-Synthesized TLB load handler fastpath (34 instructions) Base=0x941e5760. +
-TLB synthesizer field overflow (simm) +
-Synthesized TLB store handler fastpath (34 instructions) Base=0x941e5960. +
-TLB synthesizer field overflow (simm) +
-Synthesized TLB modify handler fastpath (33 instructions) Base=0x941e5b60. +
-PID hash table entries: 256 (order: 8, 4096 bytes) +
-[ohio_set_clock_notify] avm_clock_id_cpu notify disable 0x940013f8 0x9419be18 +
-[ohio_set_clock_notify] avm_clock_id_cpu notify enable 0x940013f8 0x9419be18 +
-CPU frequency 211.97 MHz +
-Using 105.984 MHz high precision timer. +
-[setup_irq]: irq 127 irqaction->handler 0x94041a10 (no_action+0x0/0x8 ) +
-[register_console] enable commandline console 0 +
-Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) +
-Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) +
-Memory: 30324k/30676k available (1477k kernel code, 320k reserved, 342k data, 112k init, 0k highmem) +
-totalram_pages= 7589 +
-Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768) +
-loops_per_jiffy=1056768 +
-Mount-cache hash table entries: 512 +
-Checking for 'wait' instruction... [speedup] idle_mode = 4 +
- with idle values available. +
-NET: Registered protocol family 16 +
-Can't analyze prologue code at 9416fc8c +
-Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher +
-[avm] configured: watchdog eventled enable shift register enable direct gpio +
-        gpio usage: reset=12 clock=13 store=10 data=9 +
-AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Feb  8 2007 14:30:44) +
-Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled +
-[uart_add_one_port] +
-ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART +
-[uart_add_one_port] dont rigister console port->type = 16 +
-port->cons = 0x941a9680 port->cons->flags = 0x7 +
-[uart_add_one_port] sucess +
-io scheduler noop registered +
-(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x200) = 0x3100 +
-(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x200) = 0x3100 +
-(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x220) = 0x3100 +
-(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x220) = 0x3100 +
-(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x240) = 0x3100 +
-(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x240) = 0x3100 +
-(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x260) = 0x3100 +
-(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x260) = 0x3100 +
-(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x280) = 0x3100 +
-(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x280) = 0x3100 +
-cpmac_if_register, dev cpmac0 (phy_id 0) registered +
-cpmac_if_register, phy_id 0 already registered +
-tun: Universal TUN/TAP device driver, 1.6 +
-tun: (C) 1999-2004 Max Krasnyansky  +
-physmap flash device: 400000 at 10000000 +
-phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank +
- Amd/Fujitsu Extended Query Table at 0x0040 +
-phys_mapped_flash: Swapping erase regions for broken CFI table. +
-number of CFI chips: 1 +
-cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. +
-RedBoot partition parsing not available +
-Generic platform RAM MTD, (c) 2004 Simtec Electronics +
-Ohio flash driver (size->0x400000 mem->0x10000000) +
-flash_size=0x800000 +
-Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank +
- Amd/Fujitsu Extended Query Table at 0x0040 +
-Ohio flash memory: Swapping erase regions for broken CFI table. +
-number of CFI chips: 1 +
-cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. +
-[mtd]: set to default: jffs2_size = 0x20 * 64KByte (0x200000 Bytes) +
-[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x36347f/3552383 +
-[init_ohio_flash] find hidden filesystem size=0x6d3b00 offset=0xac500 +
-[mtd] configure jffs2 partition +
-[mtd] fs_size=0x400000 max=0x370000 is=0x200000 max jffs2_size value 55 +
-Creating 7 MTD partitions on "Ohio flash memory": +
-0x000ac500-0x00780000 : "filesystem" +
-        'nor-flash' +
-        'Bits can be cleared (flash)' +
-        'Has an erase function' +
-mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only +
-0x00010000-0x00780000 : "kernel" +
-        'nor-flash' +
-        'Bits can be cleared (flash)' +
-        'Has an erase function' +
-0x00000000-0x00010000 : "bootloader" +
-        'nor-flash' +
-        'Bits can be cleared (flash)' +
-        'Has an erase function' +
-        'Virtual blocks not allowed' +
-0x00780000-0x007c0000 : "tffs (1)" +
-        'nor-flash' +
-        'Bits can be cleared (flash)' +
-        'Has an erase function' +
-        'Virtual blocks not allowed' +
-0x007c0000-0x00800000 : "tffs (2)" +
-        'nor-flash' +
-        'Bits can be cleared (flash)' +
-        'Has an erase function' +
-        'Virtual blocks not allowed' +
-0x00580000-0x00780000 : "jffs2" +
-        'nor-flash' +
-        'Bits can be cleared (flash)' +
-        'Has an erase function' +
-        'Virtual blocks not allowed' +
-0x00010000-0x00580000 : "Kernel without jffs2" +
-        'nor-flash' +
-        'Bits can be cleared (flash)' +
-        'Has an erase function' +
-        'Virtual blocks not allowed' +
-capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) +
-capifs: Rev 1.1.2.3 +
-NET: Registered protocol family 2 +
-IP route cache hash table entries: 512 (order: -1, 2048 bytes) +
-TCP established hash table entries: 2048 (order: 2, 16384 bytes) +
-TCP bind hash table entries: 2048 (order: 1, 8192 bytes) +
-TCP: Hash tables configured (established 2048 bind 2048) +
-TCP reno registered +
-TCP bic registered +
-mcfw_init: ok +
-NET: Registered protocol family 1 +
-NET: Registered protocol family 17 +
-NET: Registered protocol family 8 +
-NET: Registered protocol family 20 +
-[setup_irq]: irq 1 irqaction->handler 0x94001664 (dummy_timer_irq+0x0/0x14 ) +
-[setup_irq]: irq 6 irqaction->handler 0x94001678 (dummy_system_irq_2+0x0/0x18 ) +
-[ohio_late_init] +
-[ohio_set_clock_notify] avm_clock_id_system notify disable 0x9400169c 0x94279e48 +
-[ohio_set_clock_notify] avm_clock_id_system notify enable 0x9400169c 0x94279e48 +
-[tffs] alloc_chrdev_region() param=mtd4 +
-[tffs] CONFIG_TFFS_MTD_DEVICE_0=4 CONFIG_TFFS_MTD_DEVICE_1=5 +
-[tffs] Character device init successfull +
-TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0) +
-      mount on mtd4 and mtd5 (double buffering) +
-Adam2 environment variables API installed. +
-tffsd: wait for events +
-[prepare_namespace] new mount root /dev/mtdblock1 +
-use lzma compression +
-VFS: Mounted root (squashfs filesystem) readonly. +
-Freeing prom memory: 0kb freed +
-Freeing unused kernel memory: 112k freed (7617 free) +
-[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) +
-[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) +
-[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) +
-init started:  BusyBox v1.1.0 (2006.03.22-15:32+0000) multi-call binary +
-[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) +
-AR7WDT: System Init UEberwachung 120 Sekunden +
-TFFS Name Table 8 +
-HWRevision      101.1.1.0 +
-ProductID       Fritz_Box_SpeedportW701V +
-SerialNumber    0000000000000000 +
-annex   B +
-autoload        yes +
-bootloaderVersion       1.190 +
-bootserport     tty0 +
-bluetooth +
-cpufrequency    211968000 +
-firstfreeaddress        0x946AE878 +
-firmware_version        tcom +
-firmware_info   33.04.26 +
-flashsize       0x00800000 +
-kernel_args     idle=4 +
-maca    00:1A:4F:BF:17:C0 +
-macb    00:1A:4F:BF:17:C1 +
-macwlan 00:1A:4F:8D:CB:60 +
-macdsl  00:1A:4F:BF:17:C2 +
-memsize 0x02000000 +
-modetty0        38400,n,8,1,hw +
-modetty1        38400,n,8,1,hw +
-mtd0    0x90000000,0x90000000 +
-mtd1    0x90010000,0x90780000 +
-mtd2    0x90000000,0x90010000 +
-mtd3    0x90780000,0x907C0000 +
-mtd4    0x907C0000,0x90800000 +
-my_ipaddress    192.168.178.1 +
-prompt  Eva_AVM +
-ptest +
-reserved +
-req_fullrate_freq       125000000 +
-sysfrequency    125000000 +
-urlader-version 1190 +
-usb_board_mac   00:1A:4F:BF:17:C3 +
-usb_rndis_mac   00:1A:4F:BF:17:C4 +
-usb_device_id   0x0000 +
-usb_revision_id 0x0000 +
-usb_device_name USB DSL Device +
-usb_manufacturer_name   AVM +
-wlan_key        5303946966528549 +
-wlan_cal        03F5,000A,0014,00D6,010A,00DB,010A,02E4,02EC +
-HWRevision='101' +
-HWRevision_ATA='1' +
-HWRevision_BitFileCount='1' +
-HWRevision_Reserved1='0' +
-ANNEX='B' +
-OEM='tcom' +
-OEM_DEFAULT_INDEX='' +
-OEM_tmp='tcom' +
-Language='de' +
-Country='049' +
-TZ='CET-1CEST,M3.5.0,M10.5.0' +
-CONFIG_AB_COUNT='2' +
-CONFIG_ANNEX='B' +
-CONFIG_ASSIST='y' +
-CONFIG_ATA='n' +
-CONFIG_ATA_FULL='n' +
-CONFIG_AUDIO='n' +
-CONFIG_AURA='n' +
-CONFIG_BLUETOOTH='n' +
-CONFIG_BLUETOOTH_CTP='n' +
-CONFIG_BUTTON='y' +
-CONFIG_CAPI='y' +
-CONFIG_CAPI_MIPS='n' +
-CONFIG_CAPI_NT='n' +
-CONFIG_CAPI_POTS='y' +
-CONFIG_CAPI_TE='y' +
-CONFIG_CAPI_UBIK='n' +
-CONFIG_CAPI_XILINX='y' +
-CONFIG_CDROM='n' +
-CONFIG_CDROM_FALLBACK='n' +
-CONFIG_DECT='n' +
-CONFIG_DSL='y' +
-CONFIG_ENVIRONMENT_PATH='/proc/sys/urlader' +
-CONFIG_ETH_COUNT='4' +
-CONFIG_FIRMWARE_URL='http://www.telekom.de/faq' +
-CONFIG_FON='y' +
-CONFIG_HOMEI2C='n' +
-CONFIG_HOSTNAME='speedport.ip' +
-CONFIG_I2C='n' +
-CONFIG_INSTALL_TYPE='ar7_8MB_xilinx_4eth_2ab_isdn_pots_wlan_13200' +
-CONFIG_JFFS2='n' +
-CONFIG_LED_NO_DSL_LED='n' +
-CONFIG_MAILER='n' +
-CONFIG_MEDIACLI='n' +
-CONFIG_MEDIASRV='n' +
-CONFIG_NAND='n' +
-CONFIG_NFS='n' +
-CONFIG_OEM_DEFAULT='tcom' +
-CONFIG_PRODUKT='Fritz_Box_SpeedportW701V' +
-CONFIG_PRODUKT_NAME='Speedport W 701V' +
-CONFIG_RAMSIZE='32' +
-CONFIG_ROMSIZE='8' +
-CONFIG_SERVICEPORTAL_URL='none' +
-CONFIG_STOREUSRCFG='n' +
-CONFIG_SUBVERSION='' +
-CONFIG_TAM='n' +
-CONFIG_TAM_MODE='0' +
-CONFIG_TR069='y' +
-CONFIG_UBIK2='n' +
-CONFIG_UPNP='n' +
-CONFIG_USB='n' +
-CONFIG_USB_HOST_AVM='n' +
-CONFIG_USB_HOST_TI='n' +
-CONFIG_USB_PRINT_SERV='n' +
-CONFIG_USB_STORAGE='n' +
-CONFIG_USB_WLAN_AUTH='n' +
-CONFIG_VDSL='n' +
-CONFIG_VERSION='04.26' +
-CONFIG_VERSION_MAJOR='33' +
-CONFIG_VLYNQ='y' +
-CONFIG_VLYNQ0='0' +
-CONFIG_VLYNQ1='0' +
-CONFIG_VPN='n' +
-CONFIG_WLAN='y' +
-CONFIG_WLAN_1130TNET='n' +
-CONFIG_WLAN_1350TNET='y' +
-CONFIG_WLAN_GREEN='n' +
-CONFIG_WLAN_WDS='y' +
-CONFIG_XILINX='y' +
-set 'Activate Wizzard' +
-mknod: /var/flash/ar7.cfg: File exists +
-cp /etc/default.049/fx_moh.default /var/fx_moh +
-checkempty: warning, /var/flash/voip.cfg not found - nop +
-Piglet: module license ' +
-(C) Copyright 2005 by AVM +
-' taints kernel. +
-attempting to load DSL Firmware '/lib/modules/microvoip-dsl.bin' +
-**** ANNEX: 'B' +
-************************************* +
-setting DSL Firmware to Annex B +
-registered device TI Avalanche SAR +
-tiatm driver (patch_annex=0xc00519ec) +
-[tiatm] Set StrictPriority=0 +
-DSP binary filesize = 303784 bytes +
-[setup_irq]: irq 23 irqaction->handler 0xc003920c (tn7atm_sar_irq+0x0/0x30 [tiatm] ) +
-[setup_irq]: irq 31 irqaction->handler 0xc003923c (tn7atm_dsl_irq+0x0/0x28 [tiatm] ) +
-[tiatm]: Powermanagment (States => 1,3,10) supported! +
-Texas Instruments ATM driver: version:[4.06.04.30] +
-ubik2 driver (ubik2 - 0x10=0xc00646b4) +
-atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0055c00 +
-atm_dsp_register_ubik2: dsp mem pointer 0xa1c0f218 +
-ubik2_init_interface: DSP-Link Version v3 8480 +
-isdn_fbox: Loading... +
-isdn_fbox: Driver 'isdn_fbox' attached to stack +
-isdn_fbox: CAPI driver registered. +
-isdn_fbox: AVM F!Box expected @ port 0x0000, irq 0 +
-isdn_fbox: Loading... +
-isdn_fbox: Stack version 3.11-07 +
-isdn_fbox: D-channel 0: DSS1 +
-isdn_fbox: D-channel 1: DSS1 +
-isdn_fbox: D-channel 2: DSS1_N +
-isdn_fbox: D-channel 3: POTS +
-isdn_fbox: D-channel 4: SIP +
-isdn_fbox: Loaded. +
-kdsldmod: init start +
-kdsld: cache_create(datapipe) +
-kdsld: cache_create(datapipe_mod) +
-kdsld: cache_create(ipaccessset) +
-kdsld: cache_create(ipaccessrule) +
-kdsld: cache_create(ipfragid) +
-kdsld: cache_create(ipmasqentry) +
-kdsld: cache_create(ipmasqfwinfo) +
-kdsld: cache_create(ipmasqigdpm) +
-kdsld: cache_create(ipmasqappldata) +
-kdsld: cache_create(ipmasqmcgroup) +
-kdsld: cache_create(dnsmasqentry) +
-kdsld: cache_create(dnsstaticentry) +
-kdsld: cache_create(pingerentry) +
-kdsld: cache_create(pingerwaiter) +
-kdsld: cache_create(iprouteset) +
-kdsld: DATAPIPE: with header optimization +
-kdsldmod: init done +
-kdsld: PPP led: off (value=0) +
-2000-01-01 01:00:15 cltmgr: csock: using poll +
-Jan  1 01:00:15 cltmgr[383]: csock: using poll +
-2000-01-01 01:00:16 cltmgr: avmssl_init: done +
-Jan  1 01:00:16 cltmgr[383]: avmssl_init: done +
-2000-01-01 01:00:16 cltmgr: process priority is 19 +
-Jan  1 01:00:16 cltmgr[383]: process priority is 19 +
-MAC WLAN:       00:1A:4F:8D:CB:60 +
-WLAN is not enabled +
-SIOCGIFFLAGS: No such device +
-SIOCGIFFLAGS: No such device +
-SIOCGIFFLAGS: No such device +
-SIOCGIFFLAGS: No such device +
-SIOCGIFFLAGS: No such device +
-SIOCGIFFLAGS: No such device +
-/etc/init.d/rc.net: /etc/init.d/rc.net: 366: igdd: not found +
-Jan  1 01:00:17 websrv[408]: csock: using poll +
-Jan  1 01:00:17 cltmgr[385]: /var/flash/voip.cfg: is empty +
-Jan  1 01:00:17 cltmgr[385]: FactoryDefault=/etc/default/tcom/voip.cfg (voip) +
-Jan  1 01:00:17 cltmgr[385]: load_config(voip): factory default loaded +
-Jan  1 01:00:17 cltmgr[385]: TR-069 is NOT ACTIVATED in tr069.cfg +
-Jan  1 01:00:17 websrv[408]: avmssl_init: done +
-Jan  1 01:00:17 cltmgr[385]: mapping to info-LED already exist +
-Jan  1 01:00:17 cltmgr[385]: box init ok +
-Jan  1 01:00:17 cltmgr[385]: dlopen(/usr/share/ctlmgr/libdect.so) failed: File not found +
-Jan  1 01:00:17 cltmgr[385]: dlopen(/usr/share/ctlmgr/libtamconf.so) failed: File not found +
-Jan  1 01:00:17 cltmgr[385]: dlopen(/usr/share/ctlmgr/libvdsl.so) f[speedup] disable +
-ailed: File not found +
-Jan  1 01:00:17 cltmgr[385]: WAN (ata) led value +
-Jan  1 01:00:18 cltmgr[385]: TR069_Init() TR069_Init(assi-only) +
-Jan  1 01:00:18 cltmgr[385]: TR069_Init returned 0 +
-Jan  1 01:00:18 cltmgr[385]: TR069_Init(lite mode) returned 0 +
-Jan  1 01:00:18 cltmgr[385]: verbose: DISABLED +
-2000-01-01 01:00:18 multid: startup (Aug 31 2006 17:10:44) +
-Jan  1 01:00:18 multid[414]: startup (Aug 31 2006 17:10:44) +
-2000-01-01 01:00:18 multid: csock: using poll +
-Jan  1 01:00:18 multid[414]: csock: using poll +
-2000-01-01 01:00:18 multid: avmssl_init: done +
-Jan  1 01:00:18 multid[414]: avmssl_init: done +
-Jan  1 01:00:18 multid[418]: new cpmac driver detected +
-Jan  1 01:0[setup_irq]: irq 27 irqaction->handler 0x940e016c (0:1cpmac_main_isr+0x0/0x78 8 m) +
-ultid[418]: enabling non-ATA-Mode +
-Jan  1 01:00:18 multid[418]: normal +
-Jan  1cpmac_main_ioctl, unknown ioctl 35142 +
- 01:device eth0 entered promiscuous mode +
-00:device cpmac0 entered promiscuous mode +
-18 mulan: port 1(eth0) entering learning state +
-ltid[418]: if_setup: lan:0: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: usbrndis: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for usbrndis failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: usbrndis: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: tiwlan0: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for tiwlan0 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: tiwlan0: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: wdsup0: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsup0 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: wdsup0: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: wdsdw0: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsdw0 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: wdsdw0: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: wdsdw1: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsdw1 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: wdsdw1: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: wdsdw2: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsdw2 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: wdsdw2: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: wdsdw3: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsdw3 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: wdsdw3: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: eth1: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for eth1 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: eth1: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: eth2: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for eth2 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: eth2: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_setup: eth3: SIOCSIFADDR failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: br_add_if: get index for eth3 failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: if_allmulti: eth3: SIOCGIFFLAGS failed - No such device (19) +
-Jan  1 01:00:19 multid[418]: static routes: 0 deleted (0 failed), 0 added (0 failed) +
-Jan  1 01:00:19 multid[418]: static routes: 0 deleted (0 failed), 0 added (0 failed) +
-Jan  1 01:00:19 multid[418]: IGMP tos configured to 0x80 +
-Jan  1 01:00:19 multid[418]: mrouter: using IGMPv3 for upstream interface dsl +
-Jan  1 01:00:19 multid[418]: mrouter: using IGMPv3 for other interfaces +
-Jan  1 01:00:19 multid[418]: DHCPD on lan:0 skipped, is virtual interface +
-Jan  1 01:00:19 multid[418]: DDNS: no valid accounts +
-Jan  1 01:00:19 websrv[408]: startup (Jul  6 2006 15:36:02) +
-Jan  1 01:00:19 multid[418]: ONLINE: script /bin/onlinechanged not found. +
-Jan  1 01:00:19 multid[4kdsld: sync lost +
-18]: verbose: DISABLED +
-2000-01-01 01:00:19 dsld: csock: using poll +
-Jan  1 01:00:19 dsld[426]: csock: using poll +
-2000-01-01 01:00:19 dsld: avmssl_init: done +
-Jan  1 01:00:19 dsld[426]: avmssl_init: done +
-2000-01-01 01:00:19 dsld: startup (Jul  6 2006 15:37:07) +
-Jan  1 01:00:19 dsld[426]: startup (Jul  6 2006 15:37:07) +
-2000-01-01 01:00:19 dsld: new cpmac driver detected +
-Jan  1 01:00:19 dsld[426]: new cpmac driver detected +
-Jan  1 01:00:19 dsld[428]: DSL Mac 00:1a:4f:bf:17:c2 +
-Jan  1 01:00:19 dsld[428]: VOIP Mac 00:1a:4f:bf:17:c3 +
-Jan  1 01:00:19 dsld[428]: voip: ppptarget voip disabled, ignored +
-Jan  1 01:00:19 dsld[428]: verbose: DISABLED +
-/etc/init.d/rc.net: /etc/init.d/rc.net: 1: avmike: not found +
-telefon: use clock_gettime(CLOCK_MONOTONIC)! +
-telefon: SIGCHLD received! +
-telefon: SIGCHLD received! +
-voipd: csock: using poll +
-voipd: avmssl_init: done +
-Jan  1 01:00:22 voipd[448]: /var/flash/voip.cfg: is empty +
-Jan  1 01:00:22 voipd[448]: FactoryDefault=/etc/default/tcom/voip.cfg (voip) +
-Jan  1 01:00:22 voipd[448]: load_config(voip): factory default loaded +
-Jan  1 01:00:22 voipd[448]: startup (AVM Speedport W 701V 33.04.26 AVM SIP v5.01.48 Jul 12 2006 16:18:47) +
-Jan  1 01:00:22 voipd[448]: using capi controller 5 +
-Jan  1 01:00:22 voipd[448]: using b1 protocol 10 +
-Jan  1 01:00:22 voipd[448]: tel: supported +
-Jan  1 01:00:22 voipd[448]: ENUM NOT enabled +
-Jan  1 01:00:22 voipd[448]: enumdomain: e164.arpa +
-Jan  1 01:00:22 voipd[448]: enumdomain: e164.org +
-Jan  1 01:00:22 voipd[448]: Couldn't load shared library libspeex.so - File not found - Not a directory (20) +
-Jan  1 01:00:22 voipd[448]: VoIP led value = 0 +
-Jan  1 01:00:22 voipd[448]: no useragent configured +
-Jan  1 01:00:22 voipd[448]: INFO led: off (value=0) +
-Jan  1 01:00:22 voipd[448]: priority is -20 +
-Jan  1 01:00:22 voipd[448]: encaplen 32 +
-Jan  1 01:00:22 voipd[448]: brutto speed unknown +
-Jan  1 01:00:22 voipd[448]: PCMA: 98933 bits/second (encaplen=32,30ms) +
-Jan  1 01:00:22 voipd[448]: PCMU: 98933 bits/second (encaplen=32,30ms) +
-Jan  1 01:00:22 voipd[448]: G726-32: 70666 bits/second (encaplen=32,30ms) +
-Jan  1 01:00:22 voipd[448]: G726-40: 70666 bits/second (encaplen=32,30ms) +
-Jan  1 01:00:22 AR7WDT: System Init UEberwachung abgeschlossen (100540 ms noch verfuegbar) +
-voipd[448]: G726-24: 56533 bits/second (encaplen=32,30ms) +
-Jan  1 01:00:22 voipd[448]: iLBC: 42400 bits/second (encaplen=32,30ms) +
-Jan  1 01:00:22 voipd[448]: PCMA: 106000 bits/second (encaplen=32,20ms) +
-Jan  1 01:00:22 voipd[448]: PCMU: 106000 bits/second (encaplen=32,20ms) +
-Jan  1 01:0SysRq : Changing Loglevel +
-Loglevel set to 4 +
-0:22 voipd[448]: G72 +
-Please press Enter to activate this console. +
-</code>+
  
 ==== Output from various commands on the original firmware ==== ==== Output from various commands on the original firmware ====
Line 868: Line 396:
  
 === Kernel messages === === Kernel messages ===
-<code>+<WRAP bootlog> 
 +<nowiki>
 ~ # cat /proc/kmsg ~ # cat /proc/kmsg
 ify disable 0x940013f8 0x9419be18 ify disable 0x940013f8 0x9419be18
Line 1211: Line 740:
 mcfw_query_sent: tiwlan:0:0.0.0.0 1000 mcfw_query_sent: tiwlan:0:0.0.0.0 1000
 mcfw_query_sent: tiwlan:0:0.0.0.0 1000 mcfw_query_sent: tiwlan:0:0.0.0.0 1000
-</code>+</nowiki> 
 +</WRAP>\\
  
 === IOMEM === === IOMEM ===
Line 1475: Line 1005:
  
 ===== Installing OpenWrt ===== ===== Installing OpenWrt =====
-To install OpenWRT you need an OpenWRT Kamikaze image file, it's best to build your own if you have a Linux system around, the process is quite simple and well documented, there's just a few options that need to be changed from the build system's defaults.+ 
 +{{page>meta:infobox:outdated&noheader&nofooter&noeditbtn}} 
 + 
 +To install OpenWrt you need an OpenWrt Kamikaze image file, it's best to build your own if you have a Linux system around, the process is quite simple and well documented, there's just a few options that need to be changed from the build system's defaults.
  
 ==== Building OpenWrt ==== ==== Building OpenWrt ====
Line 1506: Line 1039:
 (see https://dev.openwrt.org/ticket/2561) (see https://dev.openwrt.org/ticket/2561)
  
-==== Flashing your OpenWRT image ==== +==== Flashing your OpenWrt image ==== 
-The best way to do this is [[docs:user-guide:generic.flashing.ftp|using the bootloaders built in FTP server]].  I also prefer to have a serial cable attached so I can monitor the progress, but this optional.+The best way to do this is [[docs:guide-user:installation:generic.flashing.ftp|using the bootloaders built in FTP server]].  I also prefer to have a serial cable attached so I can monitor the progress, but this optional.
  
-To flash OpenWRT onto any device there must be an MTD Block that spans the main unused area of the flash rom.  The adam2 bootloader always boots from MTD1 (using the "go" command).  As it turns out the W701V's MTD block 1 (mtd1) is correct for the flashing operation as can be seen from this except from the original flash map table (above).+To flash OpenWrt onto any device there must be an MTD Block that spans the main unused area of the flash rom.  The adam2 bootloader always boots from MTD1 (using the "go" command).  As it turns out the W701V's MTD block 1 (mtd1) is correct for the flashing operation as can be seen from this except from the original flash map table (above).
 ^ partition ^ start ^ end ^ size ^ description ^ ^ partition ^ start ^ end ^ size ^ description ^
 | mtd1 | <code>0x90010000</code> | <code>0x90780000</code> | <code>0x770000</code> | kernel+jffs2 jffs starts at 0x00580000) |  | mtd1 | <code>0x90010000</code> | <code>0x90780000</code> | <code>0x770000</code> | kernel+jffs2 jffs starts at 0x00580000) | 
Line 1587: Line 1120:
 My boot log looked like this: My boot log looked like this:
  
-<code>+<WRAP bootlog> 
 +<nowiki>
 Eva_AVM >go Eva_AVM >go
 AVM decompress Kernel: AVM decompress Kernel:
Line 1710: Line 1244:
  ---------------------------------------------------  ---------------------------------------------------
 root@OpenWrt:/# root@OpenWrt:/#
-</code>+</nowiki> 
 +</WRAP>\\
  
 +===== Specific configuration =====
 ==== Getting the ADSL Working via PPPoA ==== ==== Getting the ADSL Working via PPPoA ====
 /etc/config/network: /etc/config/network:
Line 1778: Line 1314:
  
  
-===== Firmware images and Bootlogs =====+===== Bootlogs =====
  
-====Barrier Breaker 14.07==== +==== OEM bootlog ==== 
-[[https://downloads.openwrt.org/barrier_breaker/14.07/ar7/generic/openwrt-EVA-3.10-squashfs.bin|Barrier Breaker 14.07]]+<WRAP bootlog> 
 +<nowiki>(AVM) EVA Revision: 1.190 Version: 1190 
 +(C) Copyright 2005 AVM Date: Nov 15 2006 Time: 16:53:42 (0) 2 0-11111 
 +[FLASH:] SPANSION Top-MirrorBit-Flash 8MB 32 Bytes WriteBuffer 
 +[FLASH:](Eraseregion [0] 127 sectors a 64kB) 
 +[FLASH:](Eraseregion [1] 8 sectors a 8kB) 
 +[SYSTEM:] OHIO on 211MHz/125MHz 
 +Eva_AVM >AVM decompress Kernel: 
 +............done 
 +start kernel 
 +[ohio_pre_init] System Clk 62500000 Hz               Linux version 2.6.13.1-ohio (jpluschke@EmbeddedVM) (gcc version 3.4.3) #3 Thu Feb 7 
 +YAMON MEMORY DESCRIPTOR dump: 
 +prom_memsize 0x02000000 
 +memsize=32 MByte 
 +prom_flashsize 0x00800000 
 +flashsize=8 MByte 
 +&_end=0x9420aec8 PFN_ALIGN(&_end)=0x9420b000 CPHYSADDR(PFN_ALIGN(&_end))=0x1420b000 memsize=0x2000000 
 +[0,941e4fc0]: base size type 
 +[0,941e4fcc]base size type 
 +prom_memsize = 0x02000000 
 +memsize=32 MByte 
 +prom_flashsize = 0x00800000 
 +flashsize=8 MByte 
 +&_end=0x9420aec8 PFN_ALIGN(&_end)=0x9420b000 CPHYSADDR(PFN_ALIGN(&_end))=0x1420b000 memsize=0x2000000 
 +CPU revision is: 00018448 
 +ohio_setup+0x0/0x100 
 +[ohio_clk_init]: dsl xtal 35328000Hz lan xtal 25000000Hz 
 +[ohio_gpio_init] 
 +Determined physical RAM map: 
 + memory: 0020b000 @ 14000000 (reserved) 
 + memory: 01df5000 @ 1420b000 (usable) 
 +On node 0 totalpages: 8192 
 +[alloc_node_mem_map] reduce size from 2883616 Bytes to  262176 Bytes 
 +[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x9420e000-0x9424e020 
 +[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93f8e000-0x9424e020 
 +  DMA zone: 8192 pages, LIFO batch:3 
 +  Normal zone: 0 pages, LIFO batch:1 
 +  HighMem zone: 0 pages, LIFO batch:1 
 +Built 1 zonelists 
 +Kernel command line: idle=4  console=ttyS0,38400n8r 
 +[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_generic, 0x30) 
 +Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. 
 +Primary data cache 8kB, 4-way, linesize 16 bytes. 
 +Synthesized TLB refill handler (20 instructions). Base=0x941e2734 
 +TLB synthesizer field overflow (simm) 
 +Synthesized TLB load handler fastpath (34 instructions) Base=0x941e5760. 
 +TLB synthesizer field overflow (simm) 
 +Synthesized TLB store handler fastpath (34 instructions) Base=0x941e5960. 
 +TLB synthesizer field overflow (simm) 
 +Synthesized TLB modify handler fastpath (33 instructions) Base=0x941e5b60. 
 +PID hash table entries: 256 (order: 8, 4096 bytes) 
 +[ohio_set_clock_notify] avm_clock_id_cpu notify disable 0x940013f8 0x9419be18 
 +[ohio_set_clock_notify] avm_clock_id_cpu notify enable 0x940013f8 0x9419be18 
 +CPU frequency 211.97 MHz 
 +Using 105.984 MHz high precision timer. 
 +[setup_irq]: irq 127 irqaction->handler 0x94041a10 (no_action+0x0/0x8 ) 
 +[register_console] enable commandline console 0 
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +Memory: 30324k/30676k available (1477k kernel code, 320k reserved, 342k data, 112k init, 0k highmem) 
 +totalram_pages= 7589 
 +Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768) 
 +loops_per_jiffy=1056768 
 +Mount-cache hash table entries: 512 
 +Checking for 'wait' instruction... [speedup] idle_mode = 4 
 + with idle values available. 
 +NET: Registered protocol family 16 
 +Can't analyze prologue code at 9416fc8c 
 +Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher 
 +[avm] configured: watchdog eventled enable shift register enable direct gpio 
 +        gpio usage: reset=12 clock=13 store=10 data=9 
 +AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Feb  8 2007 14:30:44) 
 +Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled 
 +[uart_add_one_port] 
 +ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART 
 +[uart_add_one_port] dont rigister console port->type = 16 
 +port->cons = 0x941a9680 port->cons->flags = 0x7 
 +[uart_add_one_port] sucess 
 +io scheduler noop registered 
 +(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x200) = 0x3100 
 +(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x200) = 0x3100 
 +(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x220) = 0x3100 
 +(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x220) = 0x3100 
 +(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x240) = 0x3100 
 +(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x240) = 0x3100 
 +(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x260) = 0x3100 
 +(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x260) = 0x3100 
 +(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x280) = 0x3100 
 +(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x280) = 0x3100 
 +cpmac_if_register, dev cpmac0 (phy_id 0) registered 
 +cpmac_if_register, phy_id 0 already registered 
 +tun: Universal TUN/TAP device driver, 1.6 
 +tun: (C) 1999-2004 Max Krasnyansky  
 +physmap flash device: 400000 at 10000000 
 +phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank 
 + Amd/Fujitsu Extended Query Table at 0x0040 
 +phys_mapped_flash: Swapping erase regions for broken CFI table. 
 +number of CFI chips: 1 
 +cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 
 +RedBoot partition parsing not available 
 +Generic platform RAM MTD, (c) 2004 Simtec Electronics 
 +Ohio flash driver (size->0x400000 mem->0x10000000) 
 +flash_size=0x800000 
 +Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank 
 + Amd/Fujitsu Extended Query Table at 0x0040 
 +Ohio flash memory: Swapping erase regions for broken CFI table. 
 +number of CFI chips: 1 
 +cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 
 +[mtd]: set to default: jffs2_size = 0x20 * 64KByte (0x200000 Bytes) 
 +[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x36347f/3552383 
 +[init_ohio_flash] find hidden filesystem size=0x6d3b00 offset=0xac500 
 +[mtd] configure jffs2 partition 
 +[mtd] fs_size=0x400000 max=0x370000 is=0x200000 max jffs2_size value 55 
 +Creating 7 MTD partitions on "Ohio flash memory": 
 +0x000ac500-0x00780000 : "filesystem" 
 +        'nor-flash' 
 +        'Bits can be cleared (flash)' 
 +        'Has an erase function' 
 +mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only 
 +0x00010000-0x00780000 : "kernel" 
 +        'nor-flash' 
 +        'Bits can be cleared (flash)' 
 +        'Has an erase function' 
 +0x00000000-0x00010000 : "bootloader" 
 +        'nor-flash' 
 +        'Bits can be cleared (flash)' 
 +        'Has an erase function' 
 +        'Virtual blocks not allowed' 
 +0x00780000-0x007c0000 : "tffs (1)" 
 +        'nor-flash' 
 +        'Bits can be cleared (flash)' 
 +        'Has an erase function' 
 +        'Virtual blocks not allowed' 
 +0x007c0000-0x00800000 : "tffs (2)" 
 +        'nor-flash' 
 +        'Bits can be cleared (flash)' 
 +        'Has an erase function' 
 +        'Virtual blocks not allowed' 
 +0x00580000-0x00780000 : "jffs2" 
 +        'nor-flash' 
 +        'Bits can be cleared (flash)' 
 +        'Has an erase function' 
 +        'Virtual blocks not allowed' 
 +0x00010000-0x00580000 : "Kernel without jffs2" 
 +        'nor-flash' 
 +        'Bits can be cleared (flash)' 
 +        'Has an erase function' 
 +        'Virtual blocks not allowed' 
 +capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) 
 +capifs: Rev 1.1.2.3 
 +NET: Registered protocol family 2 
 +IP route cache hash table entries: 512 (order: -1, 2048 bytes) 
 +TCP established hash table entries: 2048 (order: 2, 16384 bytes) 
 +TCP bind hash table entries: 2048 (order: 1, 8192 bytes) 
 +TCP: Hash tables configured (established 2048 bind 2048) 
 +TCP reno registered 
 +TCP bic registered 
 +mcfw_init: ok 
 +NET: Registered protocol family 1 
 +NET: Registered protocol family 17 
 +NET: Registered protocol family 8 
 +NET: Registered protocol family 20 
 +[setup_irq]: irq 1 irqaction->handler 0x94001664 (dummy_timer_irq+0x0/0x14 ) 
 +[setup_irq]: irq 6 irqaction->handler 0x94001678 (dummy_system_irq_2+0x0/0x18 ) 
 +[ohio_late_init] 
 +[ohio_set_clock_notify] avm_clock_id_system notify disable 0x9400169c 0x94279e48 
 +[ohio_set_clock_notify] avm_clock_id_system notify enable 0x9400169c 0x94279e48 
 +[tffs] alloc_chrdev_region() param=mtd4 
 +[tffs] CONFIG_TFFS_MTD_DEVICE_0=4 CONFIG_TFFS_MTD_DEVICE_1=5 
 +[tffs] Character device init successfull 
 +TFFS: tiny flash file system driverGPL (c) AVM Berlin (Version 2.0) 
 +      mount on mtd4 and mtd5 (double buffering) 
 +Adam2 environment variables API installed. 
 +tffsd: wait for events 
 +[prepare_namespace] new mount root /dev/mtdblock1 
 +use lzma compression 
 +VFS: Mounted root (squashfs filesystem) readonly. 
 +Freeing prom memory: 0kb freed 
 +Freeing unused kernel memory: 112k freed (7617 free) 
 +[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) 
 +[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) 
 +[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) 
 +init started:  BusyBox v1.1.0 (2006.03.22-15:32+0000) multi-call binary 
 +[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) 
 +AR7WDT: System Init UEberwachung 120 Sekunden 
 +TFFS Name Table 8 
 +HWRevision      101.1.1.0 
 +ProductID       Fritz_Box_SpeedportW701V 
 +SerialNumber    0000000000000000 
 +annex   B 
 +autoload        yes 
 +bootloaderVersion       1.190 
 +bootserport     tty0 
 +bluetooth 
 +cpufrequency    211968000 
 +firstfreeaddress        0x946AE878 
 +firmware_version        tcom 
 +firmware_info   33.04.26 
 +flashsize       0x00800000 
 +kernel_args     idle=4 
 +maca    00:1A:4F:BF:17:C0 
 +macb    00:1A:4F:BF:17:C1 
 +macwlan 00:1A:4F:8D:CB:60 
 +macdsl  00:1A:4F:BF:17:C2 
 +memsize 0x02000000 
 +modetty0        38400,n,8,1,hw 
 +modetty1        38400,n,8,1,hw 
 +mtd0    0x90000000,0x90000000 
 +mtd1    0x90010000,0x90780000 
 +mtd2    0x90000000,0x90010000 
 +mtd3    0x90780000,0x907C0000 
 +mtd4    0x907C0000,0x90800000 
 +my_ipaddress    192.168.178.1 
 +prompt  Eva_AVM 
 +ptest 
 +reserved 
 +req_fullrate_freq       125000000 
 +sysfrequency    125000000 
 +urlader-version 1190 
 +usb_board_mac   00:1A:4F:BF:17:C3 
 +usb_rndis_mac   00:1A:4F:BF:17:C4 
 +usb_device_id   0x0000 
 +usb_revision_id 0x0000 
 +usb_device_name USB DSL Device 
 +usb_manufacturer_name   AVM 
 +wlan_key        5303946966528549 
 +wlan_cal        03F5,000A,0014,00D6,010A,00DB,010A,02E4,02EC 
 +HWRevision='101' 
 +HWRevision_ATA='1' 
 +HWRevision_BitFileCount='1' 
 +HWRevision_Reserved1='0' 
 +ANNEX='B' 
 +OEM='tcom' 
 +OEM_DEFAULT_INDEX='' 
 +OEM_tmp='tcom' 
 +Language='de' 
 +Country='049' 
 +TZ='CET-1CEST,M3.5.0,M10.5.0' 
 +CONFIG_AB_COUNT='2' 
 +CONFIG_ANNEX='B' 
 +CONFIG_ASSIST='y' 
 +CONFIG_ATA='n' 
 +CONFIG_ATA_FULL='n' 
 +CONFIG_AUDIO='n' 
 +CONFIG_AURA='n' 
 +CONFIG_BLUETOOTH='n' 
 +CONFIG_BLUETOOTH_CTP='n' 
 +CONFIG_BUTTON='y' 
 +CONFIG_CAPI='y' 
 +CONFIG_CAPI_MIPS='n' 
 +CONFIG_CAPI_NT='n' 
 +CONFIG_CAPI_POTS='y' 
 +CONFIG_CAPI_TE='y' 
 +CONFIG_CAPI_UBIK='n' 
 +CONFIG_CAPI_XILINX='y' 
 +CONFIG_CDROM='n' 
 +CONFIG_CDROM_FALLBACK='n' 
 +CONFIG_DECT='n' 
 +CONFIG_DSL='y' 
 +CONFIG_ENVIRONMENT_PATH='/proc/sys/urlader' 
 +CONFIG_ETH_COUNT='4' 
 +CONFIG_FIRMWARE_URL='http://www.telekom.de/faq' 
 +CONFIG_FON='y' 
 +CONFIG_HOMEI2C='n' 
 +CONFIG_HOSTNAME='speedport.ip' 
 +CONFIG_I2C='n' 
 +CONFIG_INSTALL_TYPE='ar7_8MB_xilinx_4eth_2ab_isdn_pots_wlan_13200' 
 +CONFIG_JFFS2='n' 
 +CONFIG_LED_NO_DSL_LED='n' 
 +CONFIG_MAILER='n' 
 +CONFIG_MEDIACLI='n' 
 +CONFIG_MEDIASRV='n' 
 +CONFIG_NAND='n' 
 +CONFIG_NFS='n' 
 +CONFIG_OEM_DEFAULT='tcom' 
 +CONFIG_PRODUKT='Fritz_Box_SpeedportW701V' 
 +CONFIG_PRODUKT_NAME='Speedport W 701V' 
 +CONFIG_RAMSIZE='32' 
 +CONFIG_ROMSIZE='8' 
 +CONFIG_SERVICEPORTAL_URL='none' 
 +CONFIG_STOREUSRCFG='n' 
 +CONFIG_SUBVERSION='' 
 +CONFIG_TAM='n' 
 +CONFIG_TAM_MODE='0' 
 +CONFIG_TR069='y' 
 +CONFIG_UBIK2='n' 
 +CONFIG_UPNP='n' 
 +CONFIG_USB='n' 
 +CONFIG_USB_HOST_AVM='n' 
 +CONFIG_USB_HOST_TI='n' 
 +CONFIG_USB_PRINT_SERV='n' 
 +CONFIG_USB_STORAGE='n' 
 +CONFIG_USB_WLAN_AUTH='n' 
 +CONFIG_VDSL='n' 
 +CONFIG_VERSION='04.26' 
 +CONFIG_VERSION_MAJOR='33' 
 +CONFIG_VLYNQ='y' 
 +CONFIG_VLYNQ0='0' 
 +CONFIG_VLYNQ1='0' 
 +CONFIG_VPN='n' 
 +CONFIG_WLAN='y' 
 +CONFIG_WLAN_1130TNET='n' 
 +CONFIG_WLAN_1350TNET='y' 
 +CONFIG_WLAN_GREEN='n' 
 +CONFIG_WLAN_WDS='y' 
 +CONFIG_XILINX='y' 
 +set 'Activate Wizzard' 
 +mknod: /var/flash/ar7.cfg: File exists 
 +cp /etc/default.049/fx_moh.default /var/fx_moh 
 +checkempty: warning, /var/flash/voip.cfg not found - nop 
 +Piglet: module license ' 
 +(C) Copyright 2005 by AVM 
 +' taints kernel. 
 +attempting to load DSL Firmware '/lib/modules/microvoip-dsl.bin' 
 +**** ANNEX: 'B' 
 +************************************* 
 +setting DSL Firmware to Annex B 
 +registered device TI Avalanche SAR 
 +tiatm driver (patch_annex=0xc00519ec) 
 +[tiatm] Set StrictPriority=0 
 +DSP binary filesize = 303784 bytes 
 +[setup_irq]: irq 23 irqaction->handler 0xc003920c (tn7atm_sar_irq+0x0/0x30 [tiatm] ) 
 +[setup_irq]: irq 31 irqaction->handler 0xc003923c (tn7atm_dsl_irq+0x0/0x28 [tiatm] ) 
 +[tiatm]: Powermanagment (States => 1,3,10) supported! 
 +Texas Instruments ATM driver: version:[4.06.04.30] 
 +ubik2 driver (ubik2 0x10=0xc00646b4) 
 +atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0055c00 
 +atm_dsp_register_ubik2: dsp mem pointer 0xa1c0f218 
 +ubik2_init_interface: DSP-Link Version v3 8480 
 +isdn_fbox: Loading... 
 +isdn_fbox: Driver 'isdn_fbox' attached to stack 
 +isdn_fbox: CAPI driver registered. 
 +isdn_fbox: AVM F!Box expected @ port 0x0000, irq 0 
 +isdn_fbox: Loading... 
 +isdn_fbox: Stack version 3.11-07 
 +isdn_fbox: D-channel 0: DSS1 
 +isdn_fbox: D-channel 1: DSS1 
 +isdn_fbox: D-channel 2: DSS1_N 
 +isdn_fbox: D-channel 3: POTS 
 +isdn_fbox: D-channel 4: SIP 
 +isdn_fbox: Loaded. 
 +kdsldmod: init start 
 +kdsld: cache_create(datapipe) 
 +kdsld: cache_create(datapipe_mod) 
 +kdsld: cache_create(ipaccessset) 
 +kdsld: cache_create(ipaccessrule) 
 +kdsld: cache_create(ipfragid) 
 +kdsld: cache_create(ipmasqentry) 
 +kdsld: cache_create(ipmasqfwinfo) 
 +kdsld: cache_create(ipmasqigdpm) 
 +kdsld: cache_create(ipmasqappldata) 
 +kdsld: cache_create(ipmasqmcgroup) 
 +kdsld: cache_create(dnsmasqentry) 
 +kdsld: cache_create(dnsstaticentry) 
 +kdsld: cache_create(pingerentry) 
 +kdsld: cache_create(pingerwaiter) 
 +kdsld: cache_create(iprouteset) 
 +kdsld: DATAPIPE: with header optimization 
 +kdsldmod: init done 
 +kdsld: PPP led: off (value=0) 
 +2000-01-01 01:00:15 cltmgr: csock: using poll 
 +Jan  1 01:00:15 cltmgr[383]: csock: using poll 
 +2000-01-01 01:00:16 cltmgr: avmssl_init: done 
 +Jan  1 01:00:16 cltmgr[383]: avmssl_init: done 
 +2000-01-01 01:00:16 cltmgr: process priority is 19 
 +Jan  1 01:00:16 cltmgr[383]: process priority is 19 
 +MAC WLAN:       00:1A:4F:8D:CB:60 
 +WLAN is not enabled 
 +SIOCGIFFLAGS: No such device 
 +SIOCGIFFLAGS: No such device 
 +SIOCGIFFLAGS: No such device 
 +SIOCGIFFLAGS: No such device 
 +SIOCGIFFLAGS: No such device 
 +SIOCGIFFLAGS: No such device 
 +/etc/init.d/rc.net: /etc/init.d/rc.net: 366: igdd: not found 
 +Jan  1 01:00:17 websrv[408]: csock: using poll 
 +Jan  1 01:00:17 cltmgr[385]: /var/flash/voip.cfg: is empty 
 +Jan  1 01:00:17 cltmgr[385]: FactoryDefault=/etc/default/tcom/voip.cfg (voip) 
 +Jan  1 01:00:17 cltmgr[385]: load_config(voip): factory default loaded 
 +Jan  1 01:00:17 cltmgr[385]: TR-069 is NOT ACTIVATED in tr069.cfg 
 +Jan  1 01:00:17 websrv[408]: avmssl_init: done 
 +Jan  1 01:00:17 cltmgr[385]: mapping to info-LED already exist 
 +Jan  1 01:00:17 cltmgr[385]: box init ok 
 +Jan  1 01:00:17 cltmgr[385]: dlopen(/usr/share/ctlmgr/libdect.so) failed: File not found 
 +Jan  1 01:00:17 cltmgr[385]: dlopen(/usr/share/ctlmgr/libtamconf.so) failed: File not found 
 +Jan  1 01:00:17 cltmgr[385]: dlopen(/usr/share/ctlmgr/libvdsl.so) f[speedup] disable 
 +ailed: File not found 
 +Jan  1 01:00:17 cltmgr[385]: WAN (ata) led value = 0 
 +Jan  1 01:00:18 cltmgr[385]: TR069_Init() TR069_Init(assi-only) 
 +Jan  1 01:00:18 cltmgr[385]: TR069_Init returned 0 
 +Jan  1 01:00:18 cltmgr[385]: TR069_Init(lite mode) returned 0 
 +Jan  1 01:00:18 cltmgr[385]: verbose: DISABLED 
 +2000-01-01 01:00:18 multid: startup (Aug 31 2006 17:10:44) 
 +Jan  1 01:00:18 multid[414]: startup (Aug 31 2006 17:10:44) 
 +2000-01-01 01:00:18 multid: csock: using poll 
 +Jan  1 01:00:18 multid[414]: csock: using poll 
 +2000-01-01 01:00:18 multid: avmssl_init: done 
 +Jan  1 01:00:18 multid[414]: avmssl_init: done 
 +Jan  1 01:00:18 multid[418]: new cpmac driver detected 
 +Jan  1 01:0[setup_irq]: irq 27 irqaction->handler 0x940e016c (0:1cpmac_main_isr+0x0/0x78 8 m) 
 +ultid[418]: enabling non-ATA-Mode 
 +Jan  1 01:00:18 multid[418]: normal 
 +Jan  1cpmac_main_ioctl, unknown ioctl 35142 
 + 01:device eth0 entered promiscuous mode 
 +00:device cpmac0 entered promiscuous mode 
 +18 mulan: port 1(eth0) entering learning state 
 +ltid[418]: if_setup: lan:0: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: usbrndis: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for usbrndis failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: usbrndis: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: tiwlan0: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for tiwlan0 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: tiwlan0: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: wdsup0: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsup0 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: wdsup0: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: wdsdw0: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsdw0 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: wdsdw0: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: wdsdw1: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsdw1 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: wdsdw1: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: wdsdw2: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsdw2 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: wdsdw2: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: wdsdw3: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for wdsdw3 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: wdsdw3: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: eth1: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for eth1 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: eth1: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: eth2: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for eth2 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: eth2: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_setup: eth3: SIOCSIFADDR failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: br_add_if: get index for eth3 failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: if_allmulti: eth3: SIOCGIFFLAGS failed - No such device (19) 
 +Jan  1 01:00:19 multid[418]: static routes: 0 deleted (0 failed), 0 added (0 failed) 
 +Jan  1 01:00:19 multid[418]: static routes: 0 deleted (0 failed), 0 added (0 failed) 
 +Jan  1 01:00:19 multid[418]: IGMP tos configured to 0x80 
 +Jan  1 01:00:19 multid[418]: mrouter: using IGMPv3 for upstream interface dsl 
 +Jan  1 01:00:19 multid[418]: mrouter: using IGMPv3 for other interfaces 
 +Jan  1 01:00:19 multid[418]: DHCPD on lan:0 skipped, is virtual interface 
 +Jan  1 01:00:19 multid[418]: DDNS: no valid accounts 
 +Jan  1 01:00:19 websrv[408]: startup (Jul  6 2006 15:36:02) 
 +Jan  1 01:00:19 multid[418]: ONLINE: script /bin/onlinechanged not found. 
 +Jan  1 01:00:19 multid[4kdsld: sync lost 
 +18]: verbose: DISABLED 
 +2000-01-01 01:00:19 dsld: csock: using poll 
 +Jan  1 01:00:19 dsld[426]: csock: using poll 
 +2000-01-01 01:00:19 dsld: avmssl_init: done 
 +Jan  1 01:00:19 dsld[426]: avmssl_init: done 
 +2000-01-01 01:00:19 dsld: startup (Jul  6 2006 15:37:07
 +Jan  1 01:00:19 dsld[426]: startup (Jul  6 2006 15:37:07) 
 +2000-01-01 01:00:19 dsld: new cpmac driver detected 
 +Jan  1 01:00:19 dsld[426]: new cpmac driver detected 
 +Jan  1 01:00:19 dsld[428]: DSL Mac 00:1a:4f:bf:17:c2 
 +Jan  1 01:00:19 dsld[428]: VOIP Mac 00:1a:4f:bf:17:c3 
 +Jan  1 01:00:19 dsld[428]: voip: ppptarget voip disabled, ignored 
 +Jan  1 01:00:19 dsld[428]: verbose: DISABLED 
 +/etc/init.d/rc.net: /etc/init.d/rc.net: 1: avmike: not found 
 +telefon: use clock_gettime(CLOCK_MONOTONIC)! 
 +telefon: SIGCHLD received! 
 +telefon: SIGCHLD received! 
 +voipd: csock: using poll 
 +voipd: avmssl_init: done 
 +Jan  1 01:00:22 voipd[448]: /var/flash/voip.cfg: is empty 
 +Jan  1 01:00:22 voipd[448]: FactoryDefault=/etc/default/tcom/voip.cfg (voip) 
 +Jan  1 01:00:22 voipd[448]: load_config(voip): factory default loaded 
 +Jan  1 01:00:22 voipd[448]: startup (AVM Speedport W 701V 33.04.26 AVM SIP v5.01.48 Jul 12 2006 16:18:47) 
 +Jan  1 01:00:22 voipd[448]: using capi controller 5 
 +Jan  1 01:00:22 voipd[448]: using b1 protocol 10 
 +Jan  1 01:00:22 voipd[448]: tel: supported 
 +Jan  1 01:00:22 voipd[448]: ENUM NOT enabled 
 +Jan  1 01:00:22 voipd[448]: enumdomain: e164.arpa 
 +Jan  1 01:00:22 voipd[448]: enumdomain: e164.org 
 +Jan  1 01:00:22 voipd[448]: Couldn't load shared library libspeex.so - File not found - Not a directory (20) 
 +Jan  1 01:00:22 voipd[448]: VoIP led value = 0 
 +Jan  1 01:00:22 voipd[448]: no useragent configured 
 +Jan  1 01:00:22 voipd[448]: INFO led: off (value=0) 
 +Jan  1 01:00:22 voipd[448]: priority is -20 
 +Jan  1 01:00:22 voipd[448]: encaplen 32 
 +Jan  1 01:00:22 voipd[448]: brutto speed unknown 
 +Jan  1 01:00:22 voipd[448]: PCMA: 98933 bits/second (encaplen=32,30ms) 
 +Jan  1 01:00:22 voipd[448]: PCMU: 98933 bits/second (encaplen=32,30ms) 
 +Jan  1 01:00:22 voipd[448]: G726-32: 70666 bits/second (encaplen=32,30ms) 
 +Jan  1 01:00:22 voipd[448]: G726-40: 70666 bits/second (encaplen=32,30ms) 
 +Jan  1 01:00:22 AR7WDT: System Init UEberwachung abgeschlossen (100540 ms noch verfuegbar) 
 +voipd[448]: G726-24: 56533 bits/second (encaplen=32,30ms) 
 +Jan  1 01:00:22 voipd[448]: iLBC: 42400 bits/second (encaplen=32,30ms) 
 +Jan  1 01:00:22 voipd[448]: PCMA: 106000 bits/second (encaplen=32,20ms) 
 +Jan  1 01:00:22 voipd[448]: PCMU: 106000 bits/second (encaplen=32,20ms) 
 +Jan  1 01:0SysRq : Changing Loglevel 
 +Loglevel set to 4 
 +0:22 voipd[448]: G72 
 +Please press Enter to activate this console.</nowiki> 
 +</WRAP>\\
  
-Bootlog: + 
-<code>+==== OpenWrt 14.07 bootlog ==== 
 + 
 +<WRAP bootlog> 
 +<nowiki>
 (AVM) EVA Revision: 1.203 Version: 1203 (AVM) EVA Revision: 1.203 Version: 1203
  
Line 2090: Line 2125:
 network.globals=globals network.globals=globals
 network.globals.ula_prefix=fd7d:354d:d99a::/48 network.globals.ula_prefix=fd7d:354d:d99a::/48
-</code>+</nowiki> 
 +</WRAP>\\
  
-====Attitude Adjustement 12.09==== 
  
-[[http://downloads.openwrt.org/attitude_adjustment/12.09/ar7/generic/openwrt-EVA-3.3-squashfs.bin|Attitude Adjustement 12.09]]+==== OpenWrt 12.09 bootlog ====
  
-Bootlog: +<WRAP bootlog> 
-<code>+<nowiki>
 (AVM) EVA Revision: 1.203 Version: 1203 (AVM) EVA Revision: 1.203 Version: 1203
  
Line 2314: Line 2349:
           collisions:0 txqueuelen:           collisions:0 txqueuelen:
           RX bytes:26112 (25.5 KiB)  TX bytes:26112 (25.5 KiB)           RX bytes:26112 (25.5 KiB)  TX bytes:26112 (25.5 KiB)
-</code>+</nowiki> 
 +</WRAP>\\
  
 ===== References ===== ===== References =====
Line 2320: Line 2356:
  
 ==== Tags ==== ==== Tags ====
-{{tag>ar7 }}+[[meta:tags|How to add tags]] 
 +{{tag>ar7 8flash 32ram}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1