T-Home Speedport W 503V Typ C (ARV8528PW22)

ROM VER: 1.0.3 CFG 01 Readà ROM VER: 1.0.3 CFG 01 Read EEPROMX X ======================================================================= Wireless ADSL IAD 503 DANUBE Loader v1.02.04 build Mar 6 2009 11:34:36 Arcadyan Technology Corporation ======================================================================= EON EN29LV320B bottom boot 16-bit mode found Copying boot params.....DONE Press Space Bar 3 times to enter command mode ... Flash Checking Passed. Unzipping firmware at 0x80002000 ... with AREA[2][ZIP 3] [ZIP Extra] [ZIP 1] done Ready to run firmware In c_entry() function ... install_exception Co config = 80008483 [INIT] Interrupt ... ##### _ftext = 0x80002000 ##### _fdata = 0x80538D60 ##### __bss_start = 0x805F2C7C ##### end = 0x82AAFD44 allocate_memory_after_end: alloc from 82AB7D50 to 82B71C80, length=761628 ##### Backup Data from 0x80538D60 to 0x82AB7D44~0x82B71C60 len 761628 ##### Backup Data completed ##### Backup Data verified [GPIO FLOW] SetGpio() Begin .. [GPIO FLOW] SetGpio() End. [INIT] System Log Pool startup ... [INIT] MTinitialize .. [INIT] usrclk CPU Clock 333333334 Hz mips_counter_frequency:166666667 r4k_offset: 00028b0a(166666) init_US_counter : time1 = 25 , time2 = 32000053, diff 32000028 US_counter = 84 cnt1 32667250 cnt2 32668985, diff 1735 cnt1 33260418 cnt2 33262216, diff 1798 Runtime code version: 1.10.000 System startup... [INIT] Memory COLOR 0, 2548576 bytes .. [INIT] Memory COLOR 1, 10485760 bytes .. [INIT] Memory COLOR 2, 5546928 bytes .. InitCommSys: RESOURCE_BASE = 63, NUMRES = 640 InitCommSys: EVENT_BASE = 119, NUMEVT = 818 InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64 rzMemory start: 0x81614E34, end 0x819F8F44, size 4079888 Build Day = Jan 10 2011 >>>>set_MP_pass_Magic to 5 EON EN29LV320B bottom boot 16-bit mode found Set flash memory layout to Boot Parameters found !!! Bootcode version: v1.02.04 Serial number: J004088486 Hardware version: 01A pBootParams->password 35 31 32 (20) Entered default password checking 8 8 fread_config_b> sizeof(struct III_Config_t) is 243680 EON EN29LV320B bottom boot 16-bit mode found fread_config_b> 48140 bytes read from flash fread_config_b> 332890 bytes decompressed successfully. my CFGVersionMagic = 33343536 my CFGsize = 243680, my CFGDescSize = 33297 my Version = 1.10.000 My CfgHexSize:11099 My CFGDescSize:33297 old CFGVersionMagic on flash = 33343536 CFGsize on flash = 243680, CFGDescSize on flash = 33297 Version on flash = 1.07.000 === Old CfgHexSize = 11099, Old CFGDescSize = 33297 Unzipping from 814AC034 to 814A3E10 ... [ZIP 1] allocate_memory_after_end: alloc from 82B71C80 to 82B85B00, length=81516 [ZIP 1 49492c30] done Uncompressed size = 33295 Tail1 : END_III_Config_t Size of Old CFG_DESC is :33295!!! 1.useCfgDesc:1 Unzipping from 814A129C to 81499078 ... [ZIP 1] [ZIP 1 49492c30] done Uncompressed size = 33295 2.useCfgDesc:1 Tail : END_III_Config_t useCfgDesc:3 Restore Config file from ver: 1.07.000 !!! config saved by fw older than 1.08.000, 1.08.999, update gSetting.qm_l1_config[0].qm_func to copy from gConfig to gSetting in restore_config DS_Tail:[t_ARV4528PW] RELEASE_BUF_AND_RETURN_OK - restore_config() #13198, in danube/config.c - restore_config() #13203, in danube/config.c restore config OK. nCfgDescLen=254787. -----------------------> Checking SysLog in Flash OK. nLen=78103 -----------------------> Restore SysLog from Flash 78082 bytes from 3e349 -----------------------> Restore Call Log from Flash 15 bytes from 51452 !!! Invalid wireless channel range 0 ~ 255 !!! Use default value 1 ~ 13 ====xxx==============================-->425@-230;600(.4/.4/1,.4/3/1) -->425@-230;30(.1/.25/1,.1/3/1) -->600(.9/4.8) -->600(.3/.5,.3/3) -->600(.9/3.9) check_WAN_switch returns 0 default route: 0.0.0.0 BufferInit: BUF_HDR_SZ=160 BUF_ALIGN_SZ=0 BUFFER_OFFSET=384 BUF_BUFSZ0=544 BUF_BUFSZ1=3424 NUM_OF_B0=0 NUM_OF_B1=3000 BUF_POOL0_SZ=0 BUF_POOL1_SZ=10752000 sizeof(BUFFER0)=704,sizeof(BUFFER1)=3584 *BUF0=0x82499fcc *BUF1=0x81a58fac Altgn *BUF0=0x82499fe0 *BUF1=0x81a58fc0 End at BUF0:0x82499fe0, BUF1:0x82499fc0 BUF0[0]=0x82499fe0 BUF1[0]=0x81a58fc0 buffer0 pointer init OK! buffer1 pointer init OK! NetJobTableInit> atheros_tmr_init> base_timer.expire=2147483647 RUNTASK id=1 rapi_tmr_task ... [qm_lnk_init] CLOCKHZ=1000 ... [qm_lnk_init] add if 3 into QM link 0 [qm_cbq_enable] no QM attached [qm_cbq_detach] no QM is attached at link 0 f=3492148201/100000, ns_per_byte=1090005888/100000 New cls: id=0, bw=8080 ns/byte, maxd=0 ms, maxb=32, minb=2, avgpktsz=0, maxpktsz=0, offtime=1, parent=0, borrow=0 pri=0, maxidle=1, minidle=0, maxq=96, clsfg=17 f=2002645667/100000, ns_per_byte=1083109375/100000 New cls: id=1, bw=808080 ns/byte, maxd=0 ms, maxb=16, minb=1, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aacc1c, borrow=82aacc1c pri=5, maxidle=1, minidle=0, maxq=48, clsfg=21 qm_cbq_attach(): cbqp->cbq_res=56 f=90439747/100000, ns_per_byte=1089990048/100000 New cls: id=2, bw=8162 ns/byte, maxd=0 ms, maxb=32, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aacc1c, borrow=82aacc1c pri=5, maxidle=1, minidle=0, maxq=48, clsfg=21 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=3, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=0, maxidle=0, minidle=0, maxq=96, clsfg=21 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=4, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=1, maxidle=0, minidle=0, maxq=48, clsfg=23 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=5, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=2, maxidle=0, minidle=0, maxq=48, clsfg=23 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=6, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=3, maxidle=0, minidle=0, maxq=48, clsfg=23 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=7, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=4, maxidle=0, minidle=0, maxq=48, clsfg=23 f=90439747/100000, ns_per_byte=1089990048/100000 New cls: id=8, bw=8162 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=6, maxidle=1, minidle=0, maxq=48, clsfg=20 [qm_cbq_reset_dstcp_ctrl] dstcp_ctrl_fg=0x0, dstcp_pkt_delay=0 ms, dstcp_max_burst=6056 bytes CLOCKHZ=1000 gConfig.Interface[0].IP_Addr = 127.0.0.1 gConfig.Interface[0].Subnet_Mask = 255.255.255.255 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! Interface 0 ip = 127.0.0.1 gConfig.Interface[1].IP_Addr = 192.168.2.1 gConfig.Interface[1].Subnet_Mask = 255.255.255.0 ether_register_vlan(1): binding not found ether_init(1): no tagged VLAN ifno=1, vlan=0, vid=1, port_mask=0xf DMA g_desc_list=0x814A85C0 reset GPIO#13. danube_sw_chip_init: in MII mode [VLAN] port: 0x000f, ifCount=1 [ar8216_VLAN_addVID]create a vid 1 vlan_vidmap[5].vid 0 vid 1 [ar8216_VLAN_ASIC_addVID]VID 1 has member 3ff [ar8216_VLAN_addPortVID]add port 2 to vid 1 member [ar8216_VLAN_setPortVID]set port 2 vid 1 [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff ------->add port 2 to vlan 1 [ar8216_VLAN_addPortVID]add port 3 to vid 1 member [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff [ar8216_VLAN_setPortVID]set port 3 vid 1 [ar8216_VLAN_ASIC_setPortVID]port 3 VID 1 has member 3ff ------->add port 3 to vlan 1 [ar8216_VLAN_addPortVID]add port 4 to vid 1 member [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 3 VID 1 has member 3ff [ar8216_VLAN_setPortVID]set port 4 vid 1 [ar8216_VLAN_ASIC_setPortVID]port 4 VID 1 has member 3ff ------->add port 4 to vlan 1 [ar8216_VLAN_addPortVID]add port 5 to vid 1 member [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 3 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 4 VID 1 has member 3ff [ar8216_VLAN_setPortVID]set port 5 vid 1 [ar8216_VLAN_ASIC_setPortVID]port 5 VID 1 has member 3ff ------->add port 5 to vlan 1 [ar8216_VLAN_addPortVID]add port 0 to vid 1 member [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 3 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 4 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 5 VID 1 has member 3ff mac_0_init: interface 1 registered to VLAN 1, port_mask=f MAC Address: 00:26:4d:40:03:26 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! Interface 1 ip = 192.168.2.1 gConfig.Interface[2].IP_Addr = 0.0.0.0 gConfig.Interface[2].Subnet_Mask = 0.0.0.0 ether_register_vlan(2): binding not found ether_init(2): no tagged VLAN danube pci startup... PCI clock 33.3MHz DANUBE_GPIO_P1_ALTSEL0=447 DANUBE_GPIO_P1_ALTSEL1=0 DANUBE_GPIO_P1_DIR=91f6 [HWLAN] ifno=2 irno=7 port=0x00000000 [PCI] devtag=00000070 probe=8006ce5c ##### We detect Merlin (PCI) without EEPROM ##### [HWLAN] devtag = 00000070 [HWLAN] Vendor ID 0x168c [HWLAN] Device ID 0x29 [HWLAN] Base Addr 0xb8000000 [HWLAN] SVendor ID 0x168c [HWLAN] SDevice ID 0xee1c [HWLAN] Revision ID 0x1 [HWLAN] interrupt vector 0x1 ath_pci_probe : pdev=0x814a8238 PCI_CACHE_LINE_SIZE : 8 after PCI_LATENCYTIMER pci_read_config_dword( dev_id, 0x40 ) return 32896 ath_pci_probe : dev->name wifi0 T_WIFI_INT=12 dev=0x81a3de6c dev->priv=0x825afc20 call ath_attach 1 : dev 81a3de6c name 81a3eb18 wifi0 ATH_INIT_TQUEUE() : 8007ba68 ??? ATH_INIT_TQUEUE() : 80086a2c ??? ATH_INIT_TQUEUE() : 8008e7cc ??? ATH_INIT_TQUEUE() : 80076824 ??? ATH_INIT_TQUEUE() : 8007a0e8 ??? ATH_INIT_TQUEUE() : 8007ba68 ??? ATH_INIT_TQUEUE() : 80076774 ??? ATH_INIT_TQUEUE() : 80076af4 ??? EEPROM : EEP_MAP_DEFAULT !!!!! Powertable magic: a55a ar5416CheckEepromDef: Read Magic = 0xA55A need_swap = True. EEPROM Endianness is not native.. Changing regDmn[0] 0 regDmn[1] 1f change it to 1f1f [HWLAN] Set HWLAN MAC as LAN MAC .. ath_getchannels> nchan=50 ath_getchannels> nchan=50 ath_getchannels> nchan=50 match:9 Chan Freq RegPwr HT CTL CTL_U CTL_L DFS 1 2412n 20 HT20 1 0 1 N 2 2417n 20 HT20 1 0 1 N 3 2422n 20 HT40 1 0 1 N 4 2427n 20 HT40 1 0 1 N 5 2432n 20 HT40 1 1 1 N 6 2437n 20 HT40 1 1 1 N 7 2442n 20 HT40 1 1 1 N 8 2447n 20 HT40 1 1 1 N 9 2452n 20 HT40 1 1 1 N 10 2457n 20 HT40 1 1 0 N 11 2462n 20 HT40 1 1 0 N 12 2467n 20 HT20 1 1 0 N 13 2472n 20 HT20 1 1 0 N 36 5180n 30 HT20 1 0 1 N 38 5190n 20 HT40 1 0 0 N 40 5200n 30 HT20 1 1 0 N 44 5220n 30 HT20 1 0 1 N 46 5230n 20 HT40 1 0 0 N 48 5240n 30 HT20 1 1 0 N 52 5260n 20 HT20 1 0 1 Y 54 5270n 20 HT40 1 0 0 Y 56 5280n 20 HT20 1 1 0 Y 60 5300n 20 HT20 1 0 1 Y 62 5310n 20 HT40 1 0 0 Y 64 5320n 20 HT20 1 1 0 Y 100 5500n 27 HT20 1 0 1 Y 102 5510n 27 HT40 1 0 0 Y 104 5520n 27 HT20 1 1 0 Y 108 5540n 27 HT20 1 0 1 Y 110 5550n 27 HT40 1 0 0 Y 112 5560n 27 HT20 1 1 0 Y 116 5580n 27 HT20 1 0 1 Y 118 5590n 27 HT40 1 0 0 Y 120 5600n 27 HT20 1 1 0 Y 124 5620n 27 HT20 1 0 1 Y 126 5630n 27 HT40 1 0 0 Y 128 5640n 27 HT20 1 1 0 Y 132 5660n 27 HT20 1 0 1 Y 134 5670n 27 HT40 1 0 0 Y 136 5680n 27 HT20 1 1 0 Y 140 5700n 27 HT20 1 0 0 Y ath_countrycode : 276 ATH_INIT_TQUEUE() : 80075e7c ??? ATH_INIT_TQUEUE() : 80075e7c ??? ATH_INIT_TQUEUE() : 80075e7c ??? dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0 DFS min filter rssiThresh = 21 DFS max pulse dur = 131 ticks sc->sc_hasclrkey : 1 ieee80211_set11gbasicrates wifi0: 11na rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11na MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 wifi0: mac 128.2 phy 13.0 radio 12.0 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Use hw queue 7 for UAPSD call ath_attach 2 : dev 81a3de6c name 81a3eb18 wifi0 [wifi0] : Atheros 9280 : mem=0xb8000000, irq=0 hw_base=0x81234BD4 [HWLAN] hwlan_init() end. time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 2 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[3].IP_Addr = 0.0.0.0 gConfig.Interface[3].Subnet_Mask = 0.0.0.0 ether_register_vlan(3): phy_idx=0 ether_register_vlan(3): record vlan-id 7 in entry 0 ether_init(3): registered to vlan 0, trunk 0 ether_init(3): vlan_tagged=0 ether_init(3): map to physical ifno 3 ppe: ATM init succeeded (firmware version 1.1.0.2.1.13) ATM_UBR Init SAR ifno:3 g_atm_vcc[0] CONN:1 VPI/VCI:1/32 MAC Address: 00:26:4d:40:03:27 Interface 3 ip = 0.0.0.0 gConfig.Interface[5].IP_Addr = 0.0.0.0 gConfig.Interface[5].Subnet_Mask = 0.0.0.0 IFLNK_PPPOE init : (Linkp)ifno = 5 idx = 2 IFLNK_PPPOE init : (Driverp)ifno = 5 idx = 3 Perferred method at Start = 0 Interface 5 ip = 0.0.0.0 gConfig.Interface[8].IP_Addr = 0.0.0.0 gConfig.Interface[8].Subnet_Mask = 0.0.0.0 ether_register_vlan(8): binding not found ether_init(8): no tagged VLAN [HWLAN] ifno=8 irno=7 port=0x00000000 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 8 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[9].IP_Addr = 0.0.0.0 gConfig.Interface[9].Subnet_Mask = 0.0.0.0 ether_register_vlan(9): binding not found ether_init(9): no tagged VLAN [HWLAN] ifno=9 irno=7 port=0x00000000 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 9 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[10].IP_Addr = 0.0.0.0 gConfig.Interface[10].Subnet_Mask = 0.0.0.0 ether_register_vlan(10): binding not found ether_init(10): no tagged VLAN [HWLAN] ifno=10 irno=7 port=0x00000000 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 10 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[11].IP_Addr = 0.0.0.0 gConfig.Interface[11].Subnet_Mask = 0.0.0.0 ether_register_vlan(11): binding not found ether_init(11): no tagged VLAN [HWLAN] ifno=11 irno=7 port=0x00000000 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 11 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[15].IP_Addr = 0.0.0.0 gConfig.Interface[15].Subnet_Mask = 0.0.0.0 ether_register_vlan(15): phy_idx=0 ether_register_vlan(15): record vlan-id 8 in entry 1 ether_init(15): registered to vlan 1, trunk 0 ether_init(15): vlan_tagged=1 ether_init(15): phy already initialized Interface 15 ip = 0.0.0.0 ruleCheck()> Group: 0, Error: Useless rule index will be truncated, from idx:1 ruleCheck()> Group: 1, Error: Useless rule index will be truncated, from idx:22 ruleCheck()> Group: 2, Error: Useless rule index will be truncated, from idx:0 CBAC rule format check succeed !! reqCBACBuf()> init match pool, Have: 1000 Memory Address: 0x82a477c4 ~ 0x82a4e540 reqCBACBuf()> init timeGap pool, Have: 10000 Memory Address: 0x82a4e540 ~ 0x82a7f294 reqCBACBuf()> init sameHost pool, Have: 2000 Memory Address: 0x82a7f294 ~ 0x82a8ecb4 CBAC rule pool initialized !! [init_if] local_if_mask=0xf07 [init_if] local_wiredif_mask=0x2 [init_if] local_wirelessif_mask=0xf04 [init_if] localorVPN_if_mask=0xf07 1 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 2 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 3 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 5 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 8 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 9 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 10 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 11 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 15 set_timer: ti=0 type=1 ina[00000000] gid[00000000] Init NAT data structure Low priority IF task : 0 RUNTASK id=3 if_task if0... Low priority IF task : 1 RUNTASK id=4 if_task if1... Low priority IF task : 2 RUNTASK id=5 if_task if2... High priority IF task : 3 RUNTASK id=6 if_task if3... Low priority IF task : 8 RUNTASK id=7 if_task if8... Low priority IF task : 9 RUNTASK id=8 if_task if9... Low priority IF task : 10 RUNTASK id=9 if_task if10... Low priority IF task : 11 RUNTASK id=10 if_task if11... High priority IF task : 15 RUNTASK id=11 if_task if15... RUNTASK id=12 timer_task... RUNTASK id=13 conn_mgr... RUNTASK id=14 main_8021x... Build Day = Dec 10 2010 gSetting.Rst_Time (17.02.2010, 08:00)-->year (2010),month (02),day (17),hour (08),min (00)--->(2010/2/17 8:2) RUNTASK id=15 period_task... ========== ADSL Modem initialization OK ! ====== RUNTASK id=16 dhcp_daemon... RUNTASK id=17 dhcp_clt...on interface 15 found signature: 78h 56h 34h 12h ulImgLens=1392620, LENGTH[2]-12=3801076 length checking OK [0] find End at 0xB01A3C00 len=1392620 found signature: 78h 56h 34h 12h ulImgLens=271340, LENGTH[2]-12=3801076 length checking OK [1] find End at 0xB01E6000 len=271340 ---[ ZIP1 head start in 0xB01E6400 ]--- found signature: 78h 56h 34h 12h ulImgLens=150508, LENGTH[2]-12=3801076 length checking OK [2] find End at 0xB020AC00 len=150508 ---[ ZIP1 head start in 0xB020B000 ]--- found signature: 78h 56h 34h 12h ulImgLens=417772, LENGTH[2]-12=3801076 length checking OK [3] find End at 0xB0270C00 len=417772 Image[1] at 0xB0050000, len = 1392620 Image[2] at 0xB01A4000, len = 271340 Image[3] at 0xB01E6400, len = 150508 Image[4] at 0xB020B000, len = 417772 unzip for U/I from 0xb01a4000 size 271340 Unzipping from B01A4000 to 83D00000 ... [ZIP 3] [ZIP 0] [ZIP Extra] [ZIP 1] [ZIP 1 2f534650] done Uncompressed size = 1912664 drive start addr[0]=83d00000, [1]=83ed2f60 httpd: listen at 192.168.2.1:80 httpd: listen at 192.168.2.1:443 RUNTASK httpd... RUNTASK id=21 SSLClient ... g_Client_Cert_Array=0x81614d20 RUNTASK id=22 dnsproxy... RUNTASK id=23 dhcpd_mgmt_task... UPnP is disabled TR64 is enabled TR64 Device initialize success! slot=24 [0] Allocate mailbox 6 [0] Allocate mailbox 7 FirstUseDate:2010-04-19T09:35:26 RUNTASK id=27 wscmain... RUNTASK id=28 wsc_Send_eap_packet... RUNTASK id=29 wsc_Send_UPNP_packet... RUNTASK id=30 WSC_WaitUserAction_Task... Starting Multitask... run_project_task RUNTASK id=31 CMV_task... RUNTASK id=32 ds_tcp_policing... [0] Allocate resource 63, FreeResource = 1 fpiclk=83333333, rmc=16, fpiclk/rmc=5208333 ifx_ssc_clock = 5208333, baud=1000000 ifx_ssc_set_baud: br = 2 call ifx_ssc_init() = 0 call ifx_ssc_open() = 0 SPI_Init! gptu: totally 6 16-bit timers/counters Init timer (4) - OK T_WLAN_INT=2 gSetting.CountryCode=0x8114 gSetting.Interface[T_WLAN_INT].Link_Type=1 RUNTASK id=34 apAppInit... RUNTASK id=37 ScanMIH_task... [qm_cbq_resetclst] n_totalcls=9 init psock cnt=8000 [ds_tcp_policing] rsvbw=15000 Bps [HWLAN] [1] rapi_tmr_task running ifno2dot1x_if[2]=0 ifno2dot1x_if[12]=81 ifno2dot1x_if[8]=82 ifno2dot1x_if[9]=83 ifno2dot1x_if[10]=84 ifno2dot1x_if[11]=85 dot1x_wireless_if_mask=0x1f04 [main_8021x] dot1x_build_if_mapping() completed. Danube MEI version:1.00.07 Unzip DSP firmware ... Unzipping from B01E6400 to 828F2C00 ... [ZIP 1] [ZIP 1 4a140] apAppInit called ???? init rand with sys_time=50 ath_create_vap: ifr.ifr_name = wifi0 (before ioctl) alloc_etherdev: name = wlan0 GetWdsIfno: name = wlan0 GetWdsIfno : return 2 , T_WDS_INT 8 alloc_etherdev> dev->priv = 0x811AE7CC ********** should asigned hard_start_xmit and open in dev structure ??? ReleaseWDS_ni : cnt 0 ath_create_vap: ifr.ifr_name = wlan0 (after ioctl) apAppInit: ath_create_ap, T_WLAN_INT done apAppInit> if_table[T_WIFI_INT]=0x0 wlan_confree_do> start ... [HWLAN] gSetting.Wireless_mode=9 Wireless Mode 9, Mixed 802.11n, 802.11g and 802.11b wlan_confree_do> start ... in wlan_confree_do_setmode, ------------------->change mode to 11NG ,OK wlan_confree_do> start ... ------------------->change nohtie to 0 ,OK ------------------->change pureb to 0 ,OK wlan_confree_do> start ... ath_getchannels> nchan=50 ath_getchannels> nchan=50 ath_getchannels> nchan=50 match:9 ------------------->change pureb to 0 ,OK wlan_confree_do> start ... ------------------->change pureg to 0 ,OK wlan_confree_do> start ... ------------------->change puren to 0 ,OK wlan_confree_do> start ... ------------------->set mcast rate to 22 ,OK wlan_confree_do> start ... ------------------->change cwmmode to 2 ,OK wlan_confree_do> start ... ------------------->change extoffset to -1 ,OK wlan_confree_do> start ... wlan_confree_do> start ... set amdulimit to 50000,OK! wlan_confree_do> start ... Set essid to WLAN-400386 , OK! wlan_confree_do> start ... Set mode to Master , OK! wlan_confree_do> start ... now in ieee80211_ioctl_siwfreq Set channel to 9 , OK! wlan_confree_do> start ... Set country ie to 1 , OK! wlan_confree_do> start ... Set country ie to 0 , OK! wlan_confree_do> start ... Set tx_chainmask to 3 , OK! wlan_confree_do> start ... Set rx_chainmask to 3 , OK! wlan_confree_do> start ... set hide ssid = 0, OK init_lx_acl> init_lx_acl> acl=NULL wlan_confree_do> start ... open wds function , OK apAppInit : ifno:2 dev->flags 00000000 [HWLAN]: dev->open = 800f095c, dev->name = wlan0 [HWLAN]: dev->open = 80076c64, dev->name = wifi0 ar5416CheckChan: channel 2412/0x90080; HT configuration meet regulatory ar5416CheckChan: phy mode 0, ext offset 0 ANI: capability: 9 ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory ar5416CheckChan: phy mode 1, ext offset -1 ANI: capability: 9 VOICE_DRV_Init Reset Duslic High begin Wait VOIP_Init() finished...done Uncompressed size = 303432 apAppInit : dev->flags 00001001 Reset Duslic end IFX TAPI, version 3.7.1.5, (c) 2001-2008 Infineon Technologies AG [39] Allocate mailbox 8 TAPI_init_task_queue: enter loop..8 update_img_hdr = A28F2C00 idx=0 mem_ptr=0xA28F2C00 size=65536 [35] Allocate resource 64, FreeResource = 2 IFX VMMC device driver, version 1.3.0.5, (c) 2006-2008 Infineon Technologies AG IFX MIPS24KEc MPS driver, version 2.0.0.0, (c) 2006-2008 Infineon Technologies AG ifx_mps_init_structures request_irq 1 146 ifx_mps_init_structures request_irq 2 147 ifx_mps_init_structures request_irq 3 0 142 ifx_mps_init_structures request_irq 3 1 143 ifx_mps_init_structures request_irq 3 2 144 ifx_mps_init_structures request_irq 3 3 145 VMMC_Open : Major 122 Minor 10 idx=1 mem_ptr=0xA2902C00 size=65536 IFX_TAPI_Create_Device: ndev = 0, TapiDev 816129A0 [35] Allocate resource 65, FreeResource = 3 idx=2 mem_ptr=0xA2912C00 size=65536 [35] Allocate resource 66, FreeResource = 4 [35] Allocate resource 67, FreeResource = 5 [35] Allocate resource 68, FreeResource = 6 [35] Allocate resource 69, FreeResource = 7 idx=3 mem_ptr=0xA2922C00 size=65536 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 1 ifx_tapi_Prepare_Ch: nChannel 0 [35] Allocate resource 70, FreeResource = 8 [35] Allocate resource 71, FreeResource = 9 [35] Allocate resource 72, FreeResource = 10 [35] Allocate resource 73, FreeResource = 11 idx=4 mem_ptr=0xA2932C00 size=41288 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 2 ifx_tapi_Prepare_Ch: nChannel 1 [35] Allocate resource 74, FreeResource = 12 [35] Allocate resource 75, FreeResource = 13 [35] Allocate resource 76, FreeResource = 14 [35] Allocate resource 77, FreeResource = 15 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 3 ifx_tapi_Prepare_Ch: nChannel 2 [35] Allocate resource 78, FreeResource = 16 [35] Allocate resource 79, FreeResource = 17 [35] Allocate resource 80, FreeResource = 18 [35] Allocate resource 81, FreeResource = 19 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 4 ifx_tapi_Prepare_Ch: nChannel 3 [35] Allocate resource 82, FreeResource = 20 [35] Allocate resource 83, FreeResource = 21 [35] Allocate resource 84, FreeResource = 22 [35] Allocate resource 85, FreeResource = 23 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 5 ifx_tapi_Prepare_Ch: nChannel 4 [35] Allocate resource 86, FreeResource = 24 [35] Allocate resource 87, FreeResource = 25 [35] Allocate resource 88, FreeResource = 26 [35] Allocate resource 89, FreeResource = 27 ADSL Firmware: 2.1.5.12.0.2 ATUR >>>>>>>>>>>>>>>>>(FW: 1.10.000) [Annex B:0x4208 0x0] >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 6 ifx_tapi_Prepare_Ch: nChannel 5 [35] Allocate resource 90, FreeResource = 28 [35] Allocate resource 91, FreeResource = 29 [35] Allocate resource 92, FreeResource = 30 [35] Allocate resource 93, FreeResource = 31 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 7 ifx_tapi_Prepare_Ch: nChannel 6 [35] Allocate resource 94, FreeResource = 32 [35] Allocate resource 95, FreeResource = 33 [35] Allocate resource 96, FreeResource = 34 [35] Allocate resource 97, FreeResource = 35 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 8 ifx_tapi_Prepare_Ch: nChannel 7 [35] Allocate resource 98, FreeResource = 36 [35] Allocate resource 99, FreeResource = 37 [35] Allocate resource 100, FreeResource = 38 [35] Allocate resource 101, FreeResource = 39 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 9 VMMC_LL_Open, nDev 0, inode 0 mpsCh 1 ifx_mps_open, inode 1 VMMC_Open --> 816129a0 VMMC_handle[0] : 816129a0 VMMC_Open : Major 122 Minor 11 VMMC_LL_Open, nDev 0, inode 1 mpsCh 2 ifx_mps_open, inode 2 VMMC_Open --> 81610630 VMMC_handle[1] : 81610630 VMMC_Open : Major 122 Minor 12 VMMC_LL_Open, nDev 0, inode 2 mpsCh 3 ifx_mps_open, inode 3 VMMC_Open --> 81610a9c VMMC_handle[2] : 81610a9c VMMC_Open : Major 122 Minor 13 VMMC_LL_Open, nDev 0, inode 3 mpsCh 4 ifx_mps_open, inode 4 VMMC_Open --> 81610f08 VMMC_handle[3] : 81610f08 VMMC_Open : Major 122 Minor 14 VMMC_LL_Open, nDev 0, inode 4 mpsCh 5 ifx_mps_open, inode 5 VMMC_Open --> 81611374 VMMC_handle[4] : 81611374 VMMC_Open : Major 122 Minor 15 VMMC_LL_Open, nDev 0, inode 5 mpsCh 6 ifx_mps_open, inode 6 VMMC_Open --> 816117e0 VMMC_handle[5] : 816117e0 VMMC_Open : Major 122 Minor 16 VMMC_LL_Open, nDev 0, inode 6 mpsCh 7 ifx_mps_open, inode 7 VMMC_Open --> 81611c4c VMMC_handle[6] : 81611c4c VMMC_Open : Major 122 Minor 17 VMMC_LL_Open, nDev 0, inode 7 mpsCh 8 VMMC_Open --> 816120b8 VMMC_handle[7] : 816120b8 VMMC_Open : Major 122 Minor 18 VMMC_LL_Open, nDev 0, inode 8 mpsCh 9 VMMC_Open --> 81612524 VMMC_handle[8] : 81612524 ===> Set PCM I/F 0 VMMC_handle:816129a0 ifx_mps_ioctl: FIO_MPS_DOWNLOAD...1 Unzipping from B020B000 to 825DB9BC ... [ZIP 1] [ZIP 1 a75cb796] done Uncompressed size = 642816 IFX_MPS: Download firmware (size 642816 bytes)... Init_SSLServer> input listen_protocol=6, nListenPort=443 [20] ssld_conf_init> ssl server info: [20] PrivateKey= [20] MyCertificate= [20] CaCertificate= [20] SSL_method=31 [20] verify_mode=0 [20] cipher_suites=ALL:@STRENGTH:!kEDH [20] tftp_server_ip=140.92.61.131 [20] fn_myCerttificate=ServCert.pem [20] fn_privateKey=PrivKey.pem [20] fn_caCertificate=CaCert.pem [20] ssld_conf_init> ssl server info end: PKCS12_PBE_add> PKCS12_PBE_add> support RC4 PKCS12_PBE_add> support DES PKCS12_PBE_add> support RC2 [20] pCtx=0x815f64fc in ssld_conf_init ssld_ctx_reset_cert> this is pkcs12 type certificate [20] ssld_ctx_reset_cert : re-LoadServerCertAndKey() ok!! [20] ssld_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!![20] ssld_conf_init> ssld_conf_init() ok ok! Version 11.0.0.1.0 up and running... [dhcp_clt] enable dhcp client in interface THS[15] [21] SSLClient> SSLClient() run [21] sslc_conf_init> ssl client info: [21] PrivateKey= [21] MyCertificate= [21] CaCertificate= [21] SSL_method=31 [21] verify_mode=1 [21] cipher_suites=ALL:@STRENGTH:!kEDH [21] tftp_server_ip=140.92.61.131 [21] fn_myCerttificate=ServCert.pem [21] fn_privateKey=PrivKey.pem [21] fn_caCertificate=CaCert.pem [21] sslc_conf_init> ssl client info end: [21] sslc_conf_init> pCtx=0x815dba40 in ssld_conf_init [21] sslc_ctx_reset_cert> re-LoadCACertificate( 3rdCA ) ok!! [21] sslc_ctx_reset_cert> re-LoadCACertificate( 2ndCA ) ok!! [21] sslc_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!!sslc_ctx_reset_cert> this is pkcs12 type certificate [21] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!! [21] sslc_conf_init> sslc_conf_init() ok [21] SSLClient> want to bind socket for client application! TR64DBUG::TR64_Main> Start: TR64DBUG::TR64_Main> mapping "speedport.ip" to 192.168.2.1 TR64DBUG::TR64_Main> ServiceTable @ 0x8059EBAC, ServiceNum= 23 TR64DBUG::TR64_Main> szOSandVersion: TR64DBUG::TR64_Init> Start: SSDP Initialization completed... ********************************************* Wi-Fi Simple Config Application - Intel Corp. Version: Build 2.01.1.DTM1.1, Dec 10 2010 16:06:30 ********************************************* Initializing stack... WSC_WaitUserAction:wait user action:0 ScanMIH_task> DHCP ip give: 192.168.2.100 ~ 199, range: 100 ---------in wsc init---------- ----------sizeof(uint32)=4 ----------sizeof(uint-long)=4 ----------sizeof(uint32)=2 [PORTABLITY]:WscCreateThread-------------------- WscCmd:ActualCBThreadProc: Started >> Parse Service 'urn:dslforum-org:service:DeviceInfo:1' : TRUE >> Parse Service 'urn:dslforum-org:service:DeviceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:Layer3Forwarding:1' : TRUE >> Parse Service 'urn:dslforum-org:service:LANConfigSecurity:1' : TRUE >> Parse Service 'urn:dslforum-org:service:ManagementServer:1' : TRUE >> Parse Service 'urn:dslforum-org:service:Time:1' : TRUE >> Parse Service 'urn:dslforum-org:service:UserInterface:1' : TRUE >> Parse Service 'urn:dslforum-org:service:X_VoIP:1' : TRUE >> Parse Service 'urn:dslforum-org:service:LANHostConfigManagement:1' : TRUE >> Parse Service 'urn:dslforum-org:service:LANEthernetInterfaceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WLANConfiguration:1' : TRUE >> Parse Service 'urn:dslforum-org:service:Hosts:1' : TRUE >> Parse Device 'urn:dslforum-org:device:LANDevice:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANCommonInterfaceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANDSLInterfaceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANEthernetInterfaceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANDSLConnectionManagement:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANDSLLinkConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANEthernetLinkConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANPPPConnection:1' : TRUE >> Parse Device 'urn:dslforum-org:device:WANConnectionDevice:1' : TRUE >> Parse Device 'urn:dslforum-org:device:WANDevice:1' : TRUE >> Parse Device 'urn:dslforum-org:device:InternetGatewayDevice:1' : TRUETR64DBUG::TR64_Init> tr64_pDevRoot->szDescUrl: "http://192.168.2.1/tr64_igd.xml" TR64DBUG::TR64_InitReqList> Start: TR64DBUG::TR64_InitReqList> End. TR64::TR64_Init> RUNTASK id=40 TR64_ProcessRequest... TR64DBUG::TR64_Init> End. TR64DBUG::TR64_Main> End. .[signal_1x_reset] ... ReleaseWDS_ni : cnt 0 ap_deauth_sta called ??? wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... [HWLAN]: dev->open = 800f095c, dev->name = wlan0 [HWLAN]: dev->open = 80076c64, dev->name = wifi0 ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory ar5416CheckChan: phy mode 1, ext offset -1 ANI: capability: 9 ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory ar5416CheckChan: phy mode 1, ext offset -1 ANI: capability: 9 stopWlanG called ??? ReleaseWDS_ni : cnt 0 ReleaseWDS_ni : cnt 0 [signal_1x_reset] ... wlan_config : dev->flags 00000000, /cygdrive/e/projects/w503/source/firmware/linklayer/hwlan_ath_11n_v3/wlanfun.c 736 ADSL> READY set_VoIP__reg_led_timeout clear -1 t 1449 [PORTABLITY]:WscCreateThread-------------------- WscCmd:ActualUIThreadProc: Started. ActualUIThreadProc: wait q .MasterControl constructor WscCmd::MC instantiated ok [PORTABLITY]:WscCreateThread-------------------- [PORTABLITY]:pthread_mutex_init-------------------- CTransport Construction [PORTABLITY]:WscCreateThread-------------------- In CTransport::ActualCBThreadProc ActualCBThreadProc: Calling Dequeue .>>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 10 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 11 ===> VMMC_Ioctl: Phone 1 IFX_TAPI_LINE_TYPE ok! VMMC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok! VMMC_Ioctl: Phone 1 IFX_TAPI_MAP_DATA_ADD ok! Set PCM I/F 1 VMMC_handle:81610630 ===> VMMC_Ioctl: Phone 2 IFX_TAPI_LINE_TYPE ok! VMMC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok! VMMC_Ioctl: Phone 2 IFX_TAPI_MAP_DATA_ADD ok! Set PCM I/F 2 VMMC_handle:81610a9c ===> Set PCM I/F 3 VMMC_handle:81610f08 ===> Set PCM I/F 4 VMMC_handle:81611374 ===> Set PCM I/F 5 VMMC_handle:816117e0 ===> Set PCM I/F 6 VMMC_handle:81611c4c ===> Set PCM I/F 7 VMMC_handle:816120b8 ===> Set PCM I/F 8 VMMC_handle:81612524 CheckWidebandCodec: 255 3 CheckWidebandCodec: 255 3 CheckWidebandCodec: 255 3 CheckWidebandCodec: 255 3 Setting HOOK Related Parameters 0 Setting HOOKFLASH_TIME min 70 ms max 320 ms Setting HOOKON_TIME min 320 max 320 Setting HOOK Related Parameters 1 Setting HOOKFLASH_TIME min 70 ms max 320 ms Setting HOOKON_TIME min 320 max 320 Setting HOOK Related Parameters 2 Setting HOOK Related Parameters 3 RUNTASK id=44 VINETIC_DRV_Task... [45] Allocate mailbox 9 RUNTASK id=45 VINETIC_T38_Task... RUNTASK id=47 FXO_flash_task... RUNTASK id=46 VOICE_API_task... ************** Enable ProDaaCheckInterrupt() detect 3749 .Reset Duslic High begin Reset Duslic end ProDAAInitialize: begin now ProDAAInitialize: Line-Side Device Status 0 Port 2 sytem-side revision 44, line-side revision 6 init_DTMF_data: time 4574 force_daa_offhook ch 2 onoff 1 time 4574 ProDaaOffhook 0 2 onoff 1 CID_Detect CH 2 onoff 0 FXO_PolState_DTMFCID --> Disable DTMF CID MC::Init: Init complete ok WscCmd::MC intialized ok WscCmd::Init ok, starting stack... Info::ReadConfigFile:File open ok ******************uuid_p:00000000-0000-0003000000264d400328***** mp_deviceInfo->uuid[i]: 0-0-0-0-0-0-0-3-0-0-0-26-4d-40-3-28- mp_deviceInfo->macAddr:00:26:4D:40:03:28 gSetting.dot1x.if_entry[0].enableWEP:0 authTypeFlags is 20 ,encrTypeFlags is 8 ,m_nwKey is 8865150560484848, key len is 10 ssid is WLAN-400386 force_daa_offhook ch 2 onoff 0 time 4633 ProDaaOffhook 1 2 onoff 0 CID_Detect CH 2 onoff 1 FXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CID