Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:t-com:spw500v [2018/04/22 20:13] – [TFTP and serial port method] tmomastoh:t-com:spw500v [2018/04/22 20:25] – Datatables added, cleanup, dead links removed tmomas
Line 6: Line 6:
 What makes the Speedport W500V a quite attractive device is the PBX part. It can route incoming calls from either landline and VoIP onto the connected analog phones. Comparable to what the AVM FritzBox FON Routers can do. For outgoing rules can be set to either route the call into landline or over a VoIP SIP Provider. What makes the Speedport W500V a quite attractive device is the PBX part. It can route incoming calls from either landline and VoIP onto the connected analog phones. Comparable to what the AVM FritzBox FON Routers can do. For outgoing rules can be set to either route the call into landline or over a VoIP SIP Provider.
  
-===== Hardware Highlights ===== 
-^ SoC ^ Ram ^ Flash ^ LAN ^ USB ^ Serial ^ JTag ^ 
-|Broadcom BCM6348@256MHz | 16MiB | 4MiB | 1 x 1 WAN| USB 1.1 Host supported by the SoC connection on the board unknown | Yes | ? | 
  
-OpenWRT is supported since 2010-06. There are already Images in the trunk (openwrt-SPW500V-*)e.g.[[http://downloads.openwrt.org/attitude_adjustment/12.09/brcm63xx/generic/openwrt-SPW500V-squashfs-cfe.bin]]+===== Supported Versions ===== 
 +---- datatable ---- 
 +cols    : BrandModel, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid 
 +headers Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data 
 +align   c,c,c,c,c,c,
 +filter  : Model=Speedport W 500V 
 +---- 
 + 
 +---- datatable ---- 
 +cols    : Unsupported Functions_unsupporteds 
 +filter  : Model=Speedport W 500V 
 +----
  
 User "Schrank": Tried to use "Chaos Calmer 15.05.1" on Targa WR 500 VOIP. Kernel message about too less memory. Tried again with OpenWrt-ImageBuilder-15.05.1-brcm63xx-generic.Linux-x86_64.tar.bz2 to generate minimal SPW500V Image - even more bogus kernel messages. User "Schrank": Tried to use "Chaos Calmer 15.05.1" on Targa WR 500 VOIP. Kernel message about too less memory. Tried again with OpenWrt-ImageBuilder-15.05.1-brcm63xx-generic.Linux-x86_64.tar.bz2 to generate minimal SPW500V Image - even more bogus kernel messages.
  
-[[http://dl.dropbox.com/u/4295670/speedport/speedportW500v_bootup_openwrt.txt|Here is a bootlog running the r30483]]+===== Hardware Highlights ===== 
 +---- datatable ---- 
 +cols    Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,
 +filter  : Model=Speedport W 500V 
 +---- 
 + 
 + 
 +===== Installation ===== 
 +---- datatable ---- 
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url 
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock 
 +align   : l,c,c 
 +filter  : Model=Speedport W 500V 
 +---- 
 + 
 +-> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] 
 + 
 +FIXME Please add the installation procedure here.
  
-===== Factory Firmware ===== 
-The box uses CFE as bootloader and run a Linux based firmware. 
-[[http://dl.dropbox.com/u/4295670/speedport/speedportW500V_factory_bootup.txt|See here the original bootlog from the serial port.]] 
  
-===== TFTP and serial port method =====+==== TFTP and serial port method ====
 FIXME //The following procedure mentions DG834GT instead of Speedport W 500V. If this procedure is also applicable to Speedport W 500V, please change it accordingly.// FIXME //The following procedure mentions DG834GT instead of Speedport W 500V. If this procedure is also applicable to Speedport W 500V, please change it accordingly.//
  
Line 62: Line 86:
 | {{ media:t-com:speedport_w500v_top.jpg?420x300 }} | {{ media:t-com:speedport_w500v_main_bot.jpg?420x300 }} | | {{ media:t-com:speedport_w500v_top.jpg?420x300 }} | {{ media:t-com:speedport_w500v_main_bot.jpg?420x300 }} |
 </sortable> </sortable>
-| There is a DSP daughterboard soldered to the mainboard trougn the J2 ||+| There is a DSP daughterboard soldered to the mainboard through J2 ||
 |{{ media:t-com:speedport_w500v_dsp_top.jpg?250x150 }} | {{ media:t-com:speedport_w500v_dsp_bot.jpg?250x150 }} | |{{ media:t-com:speedport_w500v_dsp_top.jpg?250x150 }} | {{ media:t-com:speedport_w500v_dsp_bot.jpg?250x150 }} |
  
Line 656: Line 680:
 ===== Tags ===== ===== Tags =====
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>bcm63xx bcm6348}}+{{tag>bcm63xx bcm6348 4flash 16ram}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1