Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision | ||
| toh:t-com:spw500v [2016/11/19 20:45] – [Hardware Highlights] Schrank | toh:t-com:spw500v [2018/04/22 20:25] – Datatables added, cleanup, dead links removed tmomas | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== T-Com Speedport W 500V ====== | ||
| + | The Speedport W500V is a Broadband Router with integrated DSL Modem, WLan Module and ISDN + Analog PBX capability for VoIP. Manufactured by Hitachi High Technologies and OEM'ed primarily through the T-Com in germany. | ||
| + | The device is also sold by Lidl under the name **Targa WR 500 VoIP**. | ||
| + | |||
| + | What makes the Speedport W500V a quite attractive device is the PBX part. It can route incoming calls from either landline and VoIP onto the connected analog phones. Comparable to what the AVM FritzBox FON Routers can do. For outgoing rules can be set to either route the call into landline or over a VoIP SIP Provider. | ||
| + | |||
| + | |||
| + | ===== Supported Versions ===== | ||
| + | ---- datatable ---- | ||
| + | cols : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid | ||
| + | headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data | ||
| + | align : c, | ||
| + | filter | ||
| + | ---- | ||
| + | |||
| + | ---- datatable ---- | ||
| + | cols : Unsupported Functions_unsupporteds | ||
| + | filter | ||
| + | ---- | ||
| + | |||
| + | User " | ||
| + | |||
| + | ===== Hardware Highlights ===== | ||
| + | ---- datatable ---- | ||
| + | cols : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, | ||
| + | header | ||
| + | align : c, | ||
| + | filter | ||
| + | ---- | ||
| + | |||
| + | |||
| + | ===== Installation ===== | ||
| + | ---- datatable ---- | ||
| + | cols : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url | ||
| + | headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock | ||
| + | align : l,c,c | ||
| + | filter | ||
| + | ---- | ||
| + | |||
| + | -> [[docs: | ||
| + | |||
| + | FIXME Please add the installation procedure here. | ||
| + | |||
| + | |||
| + | ==== TFTP and serial port method ==== | ||
| + | FIXME //The following procedure mentions DG834GT instead of Speedport W 500V. If this procedure is also applicable to Speedport W 500V, please change it accordingly.// | ||
| + | |||
| + | | {{: | ||
| + | |||
| + | This method needs access to the device serial port. You will need a level shifter to connect an RS232 port, or alternatively you may be able to use one of the older USB to mobile phone serial connection cable, or even something like the BusPirate. The DG834GT operates at 3.3V, so whatever you use must be able to interface at this voltage. | ||
| + | * Connect to the serial port on the DG834GT with the power off on the device. | ||
| + | * Set your PC to have a static IP address in the 192.168.1.xxx/ | ||
| + | * Start a TFTP server on your PC, and put the OpenWrt firmware file in it's root directory. (E.G. openwrt-DG834GT_DG834PN-squashfs-cfe.bin) | ||
| + | * Ensure you have your terminal software set to 115200 baud, 8N1. | ||
| + | * Power the DG834GT up, and hit any key on your terminal. | ||
| + | * This should get you the CFE prompt. If you just got random rubbish on the screen, you have a DG834GT that has problems with the serial port and bootloader. You may have to try using NFTP or the Netgear Firmware Recovery tool instead. | ||
| + | * In the serial terminal, type < | ||
| + | |||
| + | |||
| + | |||
| + | ===== Hardware ===== | ||
| + | ==== Info ==== | ||
| + | | **[[wp> | ||
| + | | **Vendor: | ||
| + | | **[[docs: | ||
| + | | **Board Id:** | 96348GW | | ||
| + | | **[[docs: | ||
| + | | **[[docs: | ||
| + | | **Flash-Chip: | ||
| + | | **Flash size: | ||
| + | | **RAM: | ||
| + | | **Wireless: | ||
| + | | **Ethernet: | ||
| + | | **Internet: | ||
| + | | **USB: | ||
| + | | **[[docs: | ||
| + | | **[[docs: | ||
| + | | **Power: | ||
| + | |||
| + | ==== Pictures: ==== | ||
| + | |||
| + | Mainboard: | ||
| + | < | ||
| + | | Top View | Bottom View | | ||
| + | | {{ media: | ||
| + | </ | ||
| + | | There is a DSP daughterboard soldered to the mainboard through J2 || | ||
| + | |{{ media: | ||
| + | |||
| + | ==== Serial ==== | ||
| + | |||
| + | Serial console is J3. Default settings are: 115200, 8, n, 1 | ||
| + | ^ pin ^ signal ^ | ||
| + | | 1 | 3V3 | | ||
| + | | 2 | TX | | ||
| + | | 3 | RX | | ||
| + | | 4 | GND | | ||
| + | The pin closer to the Ethernet port side is the 1st pin (it has square pad) | ||
| + | |||
| + | |||
| + | |||
| + | ==== GPIOs ==== | ||
| + | Known GPIOs: | ||
| + | ^ GPIO ^ function ^ | ||
| + | | 0 | Power LED green (LED301) | | ||
| + | | 1 | Power LED red (LED301) | | ||
| + | | 3 | PPP led (D20) | | ||
| + | | 6 | DSP reset | | ||
| + | | 7 | K1 relay drive | | ||
| + | | 28 | PSTN led (D21) | | ||
| + | | 32 | VOIP led (D24) | | ||
| + | | 33 | reset button | | ||
| + | | 34 | DSP interrupt (J604 pin 7)| | ||
| + | | 35 | K2 relay drive (relay and the driver part is unpopulated)| | ||
| + | |||
| + | ==== Relays ===== | ||
| + | |||
| + | The board has two strange connectors at the middle of the device: J604, J605. On my board the J604 was wired trough 2 0Ohm resistor to the J606 (phone connector), and the second one was wired through the K1 Relay to the same phone connector. The relay is a Takamisawa NA5W-K. It is able to switch 250VAC or 220V DC @ 2A. The K1 relay is operated by the GPIO7. Low GPIO disconnects the two connectors both pins, and a high connects them. It is also possible to populate the K2. In this case the following comoponents should be changed: | ||
| + | |||
| + | ===== Bootlogs ===== | ||
| + | ==== OEM bootlog ==== | ||
| + | <WRAP bootlog> | ||
| + | < | ||
| + | Build Date: Mon Oct 24 11:50:58 CST 2005 (root@leander_compiler) | ||
| + | Copyright (C) 2000, | ||
| + | Initializing Arena. | ||
| + | Initializing Devices. | ||
| + | Auto-negotiation timed-out | ||
| + | 10 MB Half-Duplex (assumed) | ||
| + | CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz | ||
| + | Total memory used by CFE: 0x80401000 - 0x80522E90 (1187472) | ||
| + | Initialized Data: 0x8041AFE0 - 0x8041C830 (6224) | ||
| + | BSS Area: 0x8041C830 - 0x80420E90 (18016) | ||
| + | Local Heap: 0x80420E90 - 0x80520E90 (1048576) | ||
| + | Stack Area: 0x80520E90 - 0x80522E90 (8192) | ||
| + | Text (code) segment: | ||
| + | Boot area (physical): | ||
| + | Relocation Factor: | ||
| + | Board IP address | ||
| + | Host IP address | ||
| + | Gateway IP address | ||
| + | Run from flash/host (f/h) : f | ||
| + | Default host run file name : vmlinux | ||
| + | Default host flash file name : bcm963xx_fs_kernel | ||
| + | Boot delay (0-9 seconds) | ||
| + | Board Id Name : 96348GW | ||
| + | Psi size in KB : 32 | ||
| + | Number of MAC Addresses (1-32) | ||
| + | Base MAC Address | ||
| + | Ethernet PHY Type : Internal | ||
| + | Memory size in MB : 16 | ||
| + | *** Press any key to stop auto run (1 seconds) *** | ||
| + | Auto run second count down: 110 | ||
| + | Code Address: 0x80010000, Entry Address: 0x80182018 | ||
| + | Decompression OK! | ||
| + | Entry at 0x80182018 | ||
| + | Closing network. | ||
| + | Starting program at 0x80182018 | ||
| + | Linux version 2.6.8.1 (root@leander_compiler) (gcc version 3.4.2) #1 Fri Dec 23 19:36:02 CST 2005 | ||
| + | Total Flash size: 4096K with 71 sectors | ||
| + | 96348GW prom init | ||
| + | CPU revision is: 00029107 | ||
| + | mpi: No Card is in the PCMCIA slot | ||
| + | Determined physical RAM map: | ||
| + | | ||
| + | On node 0 totalpages: 4000 | ||
| + | DMA zone: 4000 pages, LIFO batch:1 | ||
| + | Normal zone: 0 pages, LIFO batch:1 | ||
| + | HighMem zone: 0 pages, LIFO batch:1 | ||
| + | Built 1 zonelists | ||
| + | Kernel command line: root=31:0 ro noinitrd | ||
| + | brcm mips: enabling icache and dcache... | ||
| + | Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. | ||
| + | Primary data cache 8kB 2-way, linesize 16 bytes. | ||
| + | PID hash table entries: 64 (order 6: 512 bytes) | ||
| + | Using 128.000 MHz high precision timer. | ||
| + | Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) | ||
| + | Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) | ||
| + | Memory: 14140k/ | ||
| + | Calibrating delay loop... 253.95 BogoMIPS | ||
| + | Mount-cache hash table entries: 512 (order: 0, 4096 bytes) | ||
| + | Checking for ' | ||
| + | NET: Registered protocol family 16 | ||
| + | Can't analyze prologue code at 8014e0f4 | ||
| + | PPP generic driver version 2.4.2 | ||
| + | NET: Registered protocol family 24 | ||
| + | Using noop io scheduler | ||
| + | bcm963xx_mtd driver v1.0 | ||
| + | brcmboard: brcm_board_init entry | ||
| + | bcm963xx_serial driver v2.0 | ||
| + | NET: Registered protocol family 2 | ||
| + | IP: routing cache hash table of 512 buckets, 4Kbytes | ||
| + | TCP: Hash tables configured (established 512 bind 1024) | ||
| + | NET: Registered protocol family 1 | ||
| + | NET: Registered protocol family 17 | ||
| + | Ebtables v2.0 registered | ||
| + | NET: Registered protocol family 8 | ||
| + | NET: Registered protocol family 20 | ||
| + | VFS: Mounted root (squashfs filesystem) readonly. | ||
| + | Freeing unused kernel memory: 72k freed | ||
| + | init started: | ||
| + | Algorithmics/ | ||
| + | BusyBox v1.00 (2005.12.23-11: | ||
| + | Enter ' | ||
| + | Loading drivers and kernel modules... | ||
| + | atmapi: module license ' | ||
| + | blaadd: blaa_detect entry | ||
| + | adsl: adsl_init entry | ||
| + | Broadcom BCMPROCFS v1.0 initialized | ||
| + | Broadcom BCM6348A2 Ethernet Network Device v0.3 Dec 23 2005 19:34:51 | ||
| + | Config Internal PHY Through MDIO | ||
| + | BCM63xx_ENET: | ||
| + | BCM63xx_ENET: | ||
| + | eth0: MAC Address: 00: | ||
| + | PCI: Setting latency timer of device 0000: | ||
| + | PCI: Enabling device 0000: | ||
| + | wl: srom not detected, using main memory mapped srom info (wombo board) | ||
| + | wl0: wlc_attach: using main board MAC address base in NVRAM (wombo board) | ||
| + | wl0 MAC Address: 00: | ||
| + | wl0: Broadcom BCM4318 802.11 Wireless Controller 3.91.41.0 | ||
| + | Endpoint: endpoint_init entry | ||
| + | BOS: Enter bosInit | ||
| + | BOS: Enter bosAppInit | ||
| + | BOS: Exit bosAppInit | ||
| + | BOS: Exit bosInit | ||
| + | Endpoint: endpoint_init COMPLETED | ||
| + | BcmAdsl_Initialize=0xC004F2A8, | ||
| + | AdslCoreHwReset: | ||
| + | ip_tables: (C) 2000-2002 Netfilter core team | ||
| + | ip_conntrack version 2.1 (125 buckets, 0 max) - 368 bytes per conntrack | ||
| + | Echo***bin/ | ||
| + | ==> | ||
| + | device eth0 entered promiscuous mode | ||
| + | br0: port 1(eth0) entering learning state | ||
| + | br0: topology change detected, propagating | ||
| + | br0: port 1(eth0) entering forwarding state | ||
| + | Setting country code " | ||
| + | Setting country code " | ||
| + | device wl0 entered promiscuous mode | ||
| + | br0: port 2(wl0) entering learning state | ||
| + | br0: topology change detected, propagating | ||
| + | br0: port 2(wl0) entering forwarding state | ||
| + | can't open the PcListFile | ||
| + | A9 5F 0B A5 BE 75 C1 D7 89 C4 88 5B 27 1D 2D BA 88 FF B0 9F ****eric****=======retrieve account tonline failed================================== | ||
| + | ****eric****=======retrieve account | ||
| + | ****eric****=======retrieve outgoing block failed================================== | ||
| + | ****eric****=======retrieve incoming block failed================================== | ||
| + | ****eric****=======retrieve quick call failed================================== | ||
| + | tecomVoipCfgMngr: | ||
| + | vodsl cmdline is vodsl sipstart -p 0.0.0.0: | ||
| + | BOS: Enter bosInit | ||
| + | BOS: Enter bosAppInit | ||
| + | BOS: Exit bosAppInit | ||
| + | BOS: Exit bosInit | ||
| + | 00:00:32 Starting the SIP call client with the following parameters: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00: | ||
| + | 00:00:32 Process 358 priority is 0 | ||
| + | 00:00:32 Process 358: old priority 0, new priority -15 | ||
| + | BOS: Created task CMGR | ||
| + | 00:00:32 | ||
| + | Broadcom Canada, SIP Call Manager. | ||
| + | Version: 1.5.1. | ||
| + | Build Date: Dec 23 2005 19:38:01. | ||
| + | 00:00:32 cmMainThread (PID = 360) | ||
| + | can not open OUTGOING_CALL_LOG_FILE_EP0 | ||
| + | can not open OUTGOING_CALL_LOG_FILE_EP1 | ||
| + | can not open INCOMING_CALL_LOG_FILE_EP0 | ||
| + | can not open INCOMING_CALL_LOG_FILE_EP1 | ||
| + | call log: outgoingIndex[0] = 0 incomingIndex[0] = 0 | ||
| + | call log: outgoingIndex[1] = 0 incomingIndex[1] = 0 | ||
| + | 00:00:32 Cannot map country string | ||
| + | 00:00:32 Using default country (DEU) | ||
| + | kernel:: | ||
| + | kernel:: | ||
| + | 00:00:32 Endpoint Event task started with pid 361... | ||
| + | BOS: Created task eptEvent | ||
| + | 00:00:32 Endpoint Packet task started with pid 362 ... | ||
| + | BOS: Created task eptPacket | ||
| + | BOS: Enter bosStartApp | ||
| + | BOS: bosAppRootTask() - Is it morning already? Spawning app task (epoch #0)... | ||
| + | BOS: Enter TaskCreate aoAP | ||
| + | BOS: TaskCreate - spawn new task aoAP | ||
| + | bcmOsTaskCreate: | ||
| + | TASK NAME = aoAP | ||
| + | | ||
| + | BOS: Exit TaskCreate | ||
| + | BOS: AppResetDetectionEnable() - Enabled reset detection. | ||
| + | bcmOsTaskCreate: | ||
| + | TASK NAME = aoRT | ||
| + | | ||
| + | BOS: Exit bosStartApp | ||
| + | Reseting the 3341 | ||
| + | voipResetGpio = 6 | ||
| + | PASS: mmr | ||
| + | PASS: chipCtl | ||
| + | PASS: mspi | ||
| + | PASS: scratchSram | ||
| + | PASS: apmregs | ||
| + | PASS: apm0 | ||
| + | PASS: apm1 | ||
| + | PASS: hvg | ||
| + | PASS: slic | ||
| + | PASS: vpm | ||
| + | PASS: mbox | ||
| + | 3341 diagnostics passed! | ||
| + | Reseting the 3341 | ||
| + | voipResetGpio = 6 | ||
| + | Initializing 3341 drivers | ||
| + | -------------- TDM DMA setup strt -------------- | ||
| + | SAMPLESIZE = 8 | ||
| + | DESCRIPTORP = 0xb7fe6300 INGRESSP = 0xb7fe6310 EGRESSP = 0xb7fe6330 | ||
| + | Initializing Memory: 8 (16-bit locations) | ||
| + | Priming TX FIFO.... | ||
| + | Completed TDM3341 init!!!! | ||
| + | MSPI driver init SUCCESSFUL | ||
| + | MSPI driver registers update SUCCESSFUL | ||
| + | BOARDHAL Enabling relays | ||
| + | Loading 3341 Zsp with Hausware app. | ||
| + | Loading 3341 overlay to 0xb7fc0000. | ||
| + | Verifying overlay... | ||
| + | Done verifying overlay. | ||
| + | BOS: Enter TaskCreate 3341_ASSERT_IST | ||
| + | BOS: TaskCreate - spawn new task 3341_ASSERT_IST | ||
| + | bcmOsTaskCreate: | ||
| + | TASK NAME = 3341_ASSERT_IST | ||
| + | | ||
| + | BOS: Exit TaskCreate | ||
| + | DSP Handshake. | ||
| + | bosMsgQCreate: | ||
| + | BOS: Enter TaskCreate VRGEVPR | ||
| + | BOS: TaskCreate - spawn new task VRGEVPR | ||
| + | bcmOsTaskCreate: | ||
| + | TASK NAME = VRGEVPR | ||
| + | | ||
| + | BOS: Exit TaskCreate | ||
| + | BOS: Enter TaskCreate HCAS | ||
| + | BOS: TaskCreate - spawn new task HCAS | ||
| + | bcmOsTaskCreate: | ||
| + | TASK NAME = HCAS | ||
| + | | ||
| + | BOS: Exit TaskCreate | ||
| + | ENDPT: Creating hausware task | ||
| + | BOS: Enter TaskCreate HTSK | ||
| + | BOS: TaskCreate - spawn new task HTSK | ||
| + | bcmOsTaskCreate: | ||
| + | TASK NAME = HTSK | ||
| + | | ||
| + | BOS: Exit TaskCreate | ||
| + | DAA DBG: MSPI Hdl = 0x500 | ||
| + | DAA DBG: GPIO Hdl = 0xb | ||
| + | DAA DBG: Successful READ!!!! count = 0 | ||
| + | DAA DBG: ISOCAP lock count = 0 | ||
| + | Si3050 SLAC Initialised, | ||
| + | System dev rev: 0x4, Line dev rev: 0x3 | ||
| + | Line dev status: FDT:0x1, LCS: 0x0 | ||
| + | DAA Device Init completed | ||
| + | DAA init successful | ||
| + | ENDPT: ' | ||
| + | ENDPT: hdspVhdOpen Secondary Connection VHD success. VHD (0x50) of type: 0x0 | ||
| + | ENDPT: ' | ||
| + | ENDPT: hdspVhdOpen Secondary Connection VHD success. VHD (0x51) of type: 0x0 | ||
| + | bosMsgQCreate: | ||
| + | BOS: Enter TaskCreate PSTN | ||
| + | BOS: TaskCreate - spawn new task PSTN | ||
| + | bcmOsTaskCreate: | ||
| + | TASK NAME = PSTN | ||
| + | | ||
| + | BOS: Exit TaskCreate | ||
| + | pstnCtlInit successful | ||
| + | vrgendptCreate: | ||
| + | ENDPT: ' | ||
| + | ENDPT: hdspVhdOpen Endpt VHD success. VHD (0x52) of type: 0x2 | ||
| + | ENDPT: TX Gain set to 1000 | ||
| + | ENDPT: RX Gain set to 1000 | ||
| + | ENDPT: ' | ||
| + | boardHalCasGetDriver: | ||
| + | Default value for provItemId ' | ||
| + | ENDPT: Initialization completed successfully for endpt 0 | ||
| + | vrgendptCreate: | ||
| + | ENDPT: ' | ||
| + | ENDPT: hdspVhdOpen Endpt VHD success. VHD (0x53) of type: 0x2 | ||
| + | ENDPT: TX Gain set to 1000 | ||
| + | ENDPT: RX Gain set to 1000 | ||
| + | ENDPT: ' | ||
| + | boardHalCasGetDriver: | ||
| + | Default value for provItemId ' | ||
| + | ENDPT: Initialization completed successfully for endpt 1 | ||
| + | vrgendptCreate: | ||
| + | ENDPT: ' | ||
| + | ENDPT: hdspVhdOpen PSTN VHD success. VHD (0x54) of type: 0x6 | ||
| + | ENDPT: TX Gain set to 1000 | ||
| + | ENDPT: RX Gain set to 1000 | ||
| + | ENDPT: ' | ||
| + | Default value for provItemId ' | ||
| + | ENDPT: Initialization completed successfully for endpt 2 | ||
| + | 00:00:36 Start Provisioning | ||
| + | 00:00:36 Waiting for interface br0 to go up before proceeding with voice app... | ||
| + | 00:00:36 Interface br0 is UP! Proceeding with the voice app | ||
| + | 00:00:36 *** Local IP address = 192.168.2.1 *** | ||
| + | 00:00:36 Log IP: 192.168.10.100: | ||
| + | 00:00:36 Proxy IP: 0.0.0.0: | ||
| + | 00:00:36 Registrar IP: 0.0.0.0: | ||
| + | 00:00:36 User0: 1001 < | ||
| + | 00:00:36 User1: 2001 < | ||
| + | Unknown Thread' | ||
| + | DAA: Going OnHook | ||
| + | DAA: Enable on-hook Caller ID receive. | ||
| + | Unknown Thread' | ||
| + | 00:00:36 cmEptEventCb: | ||
| + | DAA: Going OnHook | ||
| + | DAA: Enable on-hook Caller ID receive. | ||
| + | SipEngine' | ||
| + | DnsResolver' | ||
| + | TransmissionMgr' | ||
| + | 00:00:36 Call Control SIP Ver. 1.5.1.0 MxSF 3.2.6.26 | ||
| + | 00:00:36 Protocol: SIP | ||
| + | 00:00:36 DigitMap: xxxxxxxxxxxxxxxxxxxx | ||
| + | BOS: Created task RTCP | ||
| + | 00:00:36 rtpInit: RTCP task created, taskId = 9226 | ||
| + | 00: | ||
| + | BOS: Created task RTP0 | ||
| + | 00: | ||
| + | BOS: Created task RTP1 | ||
| + | 00:00:36 cmStreamCodecOnlyG11: | ||
| + | 00:00:36 cmStreamSetPrefPtime: | ||
| + | 00:00:36 ccPstnInit: Init PSTN module with dial-plan = 911|112 | ||
| + | 00: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | Tcm_updatePortsetting: | ||
| + | Tcm_updatePortsetting: | ||
| + | Tcm_updatePortsetting: | ||
| + | Tcm_updatePortsetting: | ||
| + | Tcm_updatePortsetting: | ||
| + | Tcm_updatePortsetting: | ||
| + | Tcm_updatePortsetting: | ||
| + | Tcm_updatePortsetting: | ||
| + | Tcm_updateEmgTbl: | ||
| + | Tcm_updateEmgTbl: | ||
| + | Tcm_updateShortTbl: | ||
| + | Tcm_updateShortTbl: | ||
| + | Tcm_updatePartialTbl: | ||
| + | Tcm_updatePartialTbl: | ||
| + | Tcm_updatePartialTbl: | ||
| + | Tcm_updateSipDialplanTbls: | ||
| + | 00:00:36 Line 0 (1001) idle | ||
| + | 00:00:36 Line 1 (2001) idle | ||
| + | Echo***********FXO-Status=0 | ||
| + | 00:00:36 CAS EVENT line 2: CMEVT_ONHOOK | ||
| + | 00:00:36 cmEndpt: 2, cx -1: CMEVT_ONHOOK in CMST_ONHOOK endpt state | ||
| + | call Tcm_updateDialplanTblbyEvent | ||
| + | Tcm_handlesigUpdate: | ||
| + | 00:00:36 CallEvent -1, CCEVT_STATUS: | ||
| + | 00:00:36 Line 0: In Service | ||
| + | 00:00:36 Line 1: In Service | ||
| + | call Tcm_updateDialplanTblbyEvent | ||
| + | Tcm_handlesigUpdate: | ||
| + | TCM_GetFXOState, | ||
| + | 00:00:36 cmEptEventCb: | ||
| + | 00:00:36 cmGateway.c: | ||
| + | 00:00:36 cmEndpt: 0, cx -1: CMEVT_FXO_NOT_CONNECTED in CMST_ONHOOK endpt state | ||
| + | 00:00:36 cmEndpt: 1, cx -1: CMEVT_FXO_NOT_CONNECTED in CMST_ONHOOK endpt state | ||
| + | call Tcm_updateDialplanTblbyEvent | ||
| + | Tcm_handlesigUpdate: | ||
| + | pvc2684d: Interface " | ||
| + | pvc2684d: Communicating over ATM 0.1.32, encapsulation: | ||
| + | device nas_1_32 entered promiscuous mode | ||
| + | br0: port 3(nas_1_32) entering learning state | ||
| + | br0: topology change detected, propagating | ||
| + | br0: port 3(nas_1_32) entering forwarding state | ||
| + | app: no DNS information from DSL router | ||
| + | / | ||
| + | iptables: Chain already exists | ||
| + | br0: port 1(eth0) entering disabled state</ | ||
| + | </ | ||
| + | |||
| + | ==== OpenWrt bootlog ==== | ||
| + | <WRAP bootlog> | ||
| + | < | ||
| + | Build Date: Mon Oct 24 11:50:58 CST 2005 (root@leander_compiler) | ||
| + | Copyright (C) 2000, | ||
| + | |||
| + | Initializing Arena. | ||
| + | Initializing Devices. | ||
| + | 100 MB Full-Duplex (auto-neg) | ||
| + | CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz | ||
| + | |||
| + | Total memory used by CFE: 0x80401000 - 0x80522E90 (1187472) | ||
| + | Initialized Data: 0x8041AFE0 - 0x8041C830 (6224) | ||
| + | BSS Area: 0x8041C830 - 0x80420E90 (18016) | ||
| + | Local Heap: 0x80420E90 - 0x80520E90 (1048576) | ||
| + | Stack Area: 0x80520E90 - 0x80522E90 (8192) | ||
| + | Text (code) segment: | ||
| + | Boot area (physical): | ||
| + | Relocation Factor: | ||
| + | |||
| + | Board IP address | ||
| + | Host IP address | ||
| + | Gateway IP address | ||
| + | Run from flash/host (f/h) : f | ||
| + | Default host run file name : vmlinux | ||
| + | Default host flash file name : bcm963xx_fs_kernel | ||
| + | Boot delay (0-9 seconds) | ||
| + | Board Id Name : 96348GW | ||
| + | Psi size in KB : 32 | ||
| + | Number of MAC Addresses (1-32) | ||
| + | Base MAC Address | ||
| + | Ethernet PHY Type : Internal | ||
| + | Memory size in MB : 16 | ||
| + | |||
| + | *** Press any key to stop auto run (1 seconds) *** | ||
| + | Auto run second count down: 110 | ||
| + | Code Address: 0x80010000, Entry Address: 0x80010000 | ||
| + | Decompression OK! | ||
| + | Entry at 0x80010000 | ||
| + | Closing network. | ||
| + | Starting program at 0x80010000 | ||
| + | [ 0.000000] Linux version 3.0.18 (mm@lapos) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon Feb 13 19:26:51 CET 2012 | ||
| + | [ 0.000000] Detected Broadcom 0x6348 CPU revision a2 | ||
| + | [ 0.000000] CPU frequency is 256 MHz | ||
| + | [ 0.000000] 16MB of RAM installed | ||
| + | [ 0.000000] registering 37 GPIOs | ||
| + | [ 0.000000] board_bcm963xx: | ||
| + | [ 0.000000] board_bcm963xx: | ||
| + | [ 0.000000] Overriding boardid with ' | ||
| + | [ 0.000000] bootconsole [early0] enabled | ||
| + | [ 0.000000] CPU revision is: 00029107 (Broadcom BMIPS3300) | ||
| + | [ 0.000000] board_bcm963xx: | ||
| + | [ 0.000000] Determined physical RAM map: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Initrd not found or empty - disabling initrd | ||
| + | [ 0.000000] Zone PFN ranges: | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Movable zone start PFN for each node | ||
| + | [ 0.000000] early_node_map[1] active PFN ranges | ||
| + | [ 0.000000] | ||
| + | [ 0.000000] Reserving 0MB of memory at 0MB for crashkernel | ||
| + | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 | ||
| + | [ 0.000000] Kernel command line: root=/ | ||
| + | [ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes) | ||
| + | [ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) | ||
| + | [ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes. | ||
| + | [ 0.000000] Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes | ||
| + | [ 0.000000] Memory: 13324k/ | ||
| + | [ 0.000000] NR_IRQS:128 | ||
| + | [ 0.000000] Calibrating delay loop... 254.46 BogoMIPS (lpj=508928) | ||
| + | [ 0.036000] pid_max: default: 32768 minimum: 301 | ||
| + | [ 0.040000] Mount-cache hash table entries: 512 | ||
| + | [ 0.060000] NET: Registered protocol family 16 | ||
| + | [ 0.080000] registering PCI controller with io_map_base unset | ||
| + | [ 0.096000] bio: create slab < | ||
| + | [ 0.124000] pci 0000: | ||
| + | [ 0.128000] pci 0000: | ||
| + | [ 0.132000] Switching to clocksource MIPS | ||
| + | [ 0.148000] PCI: Enabling device 0000: | ||
| + | [ 0.236000] ssb: Sonics Silicon Backplane found on PCI device 0000: | ||
| + | [ 0.248000] NET: Registered protocol family 2 | ||
| + | [ 0.252000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| + | [ 0.260000] TCP established hash table entries: 512 (order: 0, 4096 bytes) | ||
| + | [ 0.268000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) | ||
| + | [ 0.272000] TCP: Hash tables configured (established 512 bind 512) | ||
| + | [ 0.280000] TCP reno registered | ||
| + | [ 0.284000] UDP hash table entries: 256 (order: 0, 4096 bytes) | ||
| + | [ 0.288000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | ||
| + | [ 0.296000] NET: Registered protocol family 1 | ||
| + | [ 0.308000] audit: initializing netlink socket (disabled) | ||
| + | [ 0.312000] type=2000 audit(0.312: | ||
| + | [ 0.320000] squashfs: version 4.0 (2009/ | ||
| + | [ 0.328000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | ||
| + | [ 0.340000] msgmni has been set to 26 | ||
| + | [ 0.344000] io scheduler noop registered | ||
| + | [ 0.348000] io scheduler deadline registered (default) | ||
| + | [ 0.356000] bcm63xx_uart.0: | ||
| + | [ 0.364000] console [ttyS0] enabled, bootconsole disabled | ||
| + | [ 0.364000] console [ttyS0] enabled, bootconsole disabled | ||
| + | [ 0.384000] bcm963xx-flash bcm963xx-flash.0: | ||
| + | [ 0.388000] bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022a7 | ||
| + | [ 0.400000] Amd/Fujitsu Extended Query Table at 0x0040 | ||
| + | [ 0.404000] | ||
| + | [ 0.408000] bcm963xx: Swapping erase regions for top-boot CFI table. | ||
| + | [ 0.416000] number of CFI chips: 1 | ||
| + | [ 0.420000] bcm963xx_flash: | ||
| + | [ 0.424000] bcm963xx-flash bcm963xx-flash.0: | ||
| + | [ 0.432000] bcm963xx_flash: | ||
| + | [ 0.440000] bcm963xx_flash: | ||
| + | [ 0.448000] bcm963xx_flash: | ||
| + | [ 0.456000] bcm963xx_flash: | ||
| + | [ 0.464000] bcm963xx_flash: | ||
| + | [ 0.472000] bcm963xx_flash: | ||
| + | [ 0.480000] bcm963xx_flash: | ||
| + | [ 0.484000] Creating 5 MTD partitions on " | ||
| + | [ 0.492000] 0x000000000000-0x000000010000 : " | ||
| + | [ 0.500000] 0x000000010100-0x0000000f0000 : " | ||
| + | [ 0.508000] mtd: partition " | ||
| + | [ 0.524000] 0x0000000f0000-0x0000003f0000 : " | ||
| + | [ 0.536000] mtd: partition " | ||
| + | [ 0.544000] split_squashfs: | ||
| + | [ 0.548000] 0x0000003f0000-0x000000400000 : " | ||
| + | [ 0.560000] 0x000000010000-0x0000003f0000 : " | ||
| + | [ 0.580000] bcm63xx_enet MII bus: probed | ||
| + | [ 0.588000] bcm63xx-wdt bcm63xx-wdt.0: | ||
| + | [ 0.604000] TCP westwood registered | ||
| + | [ 0.608000] NET: Registered protocol family 17 | ||
| + | [ 0.616000] 802.1Q VLAN Support v1.8 | ||
| + | [ 1.204000] JFFS2 notice: (1) jffs2_build_xattr_subsystem: | ||
| + | [ 1.220000] VFS: Mounted root (jffs2 filesystem) readonly on device 31:2. | ||
| + | [ 1.232000] Freeing unused kernel memory: 172k freed | ||
| + | awk: / | ||
| + | [ 4.300000] bcm63xx_enet bcm63xx_enet.0: | ||
| + | [ 4.720000] roboswitch: Probing device eth0: Failed to enable switch | ||
| + | [ 4.728000] roboswitch: Probing device eth1: No such device | ||
| + | [ 4.732000] roboswitch: Probing device eth2: No such device | ||
| + | [ 4.740000] roboswitch: Probing device eth3: No such device | ||
| + | [ 6.916000] eth0: link UP - 100/full - flow control off | ||
| + | [ 7.060000] input: gpio-buttons as / | ||
| + | [ 7.112000] Button Hotplug driver version 0.4.1 | ||
| + | - preinit - | ||
| + | Press the [f] key and hit [enter] to enter failsafe mode | ||
| + | - regular preinit - | ||
| + | - init - | ||
| + | |||
| + | Please press Enter to activate this console. | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | [ | ||
| + | </ | ||
| + | |||
| + | ===== Tags ===== | ||
| + | [[meta: | ||
| + | {{tag> | ||