Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:surecom:ep-9600-gp [2015/12/19 11:32] – FIXMEs removed tmomastoh:surecom:ep-9600-gp [2018/02/20 18:51] – ↷ Links adapted because of a move operation bobafetthotmail
Line 25: Line 25:
 | **[[wp>Instruction set]]:**               | [[wp>MIPS architecture|MIPS]] | | **[[wp>Instruction set]]:**               | [[wp>MIPS architecture|MIPS]] |
 | **Vendor:**                               | [[wp>Atheros]] | | **Vendor:**                               | [[wp>Atheros]] |
-| **[[doc:techref:Bootloader]]:**           | VxWorks | +| **[[docs:techref:bootloader]]:**           | VxWorks | 
-| **[[doc:hardware:soc|System-On-Chip]]:**  | [[doc:hardware:soc:soc.qualcomm.ar5xxx|Atheros AR2313A]] | +| **[[docs:hardware:soc|System-On-Chip]]:**  | [[docs:hardware:soc:soc.qualcomm.ar5xxx|Atheros AR2313A]] | 
-| **[[doc:hardware:cpu|CPU]] @Frq**         | :?: |+| **[[docs:hardware:cpu|CPU]] @Frq**         | :?: |
 | **Flash size:**                 | 4 MB | | **Flash size:**                 | 4 MB |
 | **Flash Chip:**                 | [[http://pdf1.alldatasheet.com/datasheet-pdf/view/164984/SPANSION/S29GL032M.html|Spansion S29GL032M90TFIR4]] | | **Flash Chip:**                 | [[http://pdf1.alldatasheet.com/datasheet-pdf/view/164984/SPANSION/S29GL032M.html|Spansion S29GL032M90TFIR4]] |
Line 33: Line 33:
 | **RAM Chip:**                   | [[http://www.esmt.com.tw/DB/manager/upload/M12L128168A.pdf|ESMT M12L128168A]] | | **RAM Chip:**                   | [[http://www.esmt.com.tw/DB/manager/upload/M12L128168A.pdf|ESMT M12L128168A]] |
 | **Wireless:**               | Atheros AR2112A :?: w/ 2 external antennas for 802.11b/g | | **Wireless:**               | Atheros AR2112A :?: w/ 2 external antennas for 802.11b/g |
-| **[[doc:hardware:Switch]]:**    | [[http://www.icplus.com.tw/pp-IP101A.html|IC+ IP101A]] | +| **[[docs:hardware:switch]]:**    | [[http://www.icplus.com.tw/pp-IP101A.html|IC+ IP101A]] | 
-| **[[doc/hardware/internet.access.technologies|Modem]]:**   | none |+| **[[docs:hardware:internet.access.technologies|Modem]]:**   | none |
 | **USB:**                        | No | | **USB:**                        | No |
-| **[[doc:hardware:port.serial|Serial]]:**  | [[#Serial|Yes]] | +| **[[docs:hardware:port.serial|Serial]]:**  | [[#Serial|Yes]] | 
-| **[[doc:hardware:port.jtag|JTAG]]:**      | [[#JTAG|Yes]] |+| **[[docs:hardware:port.jtag|JTAG]]:**      | [[#JTAG|Yes]] |
  
 ==== Photos ==== ==== Photos ====
Line 60: Line 60:
  
 ==== Serial ==== ==== Serial ====
--> [[doc:hardware:port.serial]] general information about the serial port, serial port cable, etc.+-> [[docs:hardware:port.serial]] general information about the serial port, serial port cable, etc.
  
 Serial console could be plugged to JP1: connector lacks, it has to be soldered on the board. Serial console could be plugged to JP1: connector lacks, it has to be soldered on the board.
Line 80: Line 80:
  
 ==== JTAG ==== ==== JTAG ====
--> [[doc:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.+-> [[docs:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.
  
 Jtag pins are located in J1, but the connector lacks. The pinout and specifications should be the same of [[toh:d-link:dwl-2100ap#serial|D-link DWL-2100AP]] Jtag pins are located in J1, but the connector lacks. The pinout and specifications should be the same of [[toh:d-link:dwl-2100ap#serial|D-link DWL-2100AP]]
  • Last modified: 2021/01/15 18:26
  • by danitool