Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:soekris:net6501 [2015/11/30 21:14] – [[meta:tags]] -> [[meta:tags|How to add tags]] tmomastoh:soekris:net6501 [2018/03/03 20:56] – ↷ Links adapted because of a move operation bobafetthotmail
Line 1: Line 1:
 +====== Soekris net6501 ======
  
 +This is a relatively expensive/powerful general purpose x86 device that can function as a router, firewall, etc. Vendor has an [[http://soekris.com/products/net6501.html|info page]] and a [[http://wiki.soekris.info/Category:Net6501|wiki]].
 +
 +===== Supported Versions =====
 +
 +**<color red>Work in progress</color>**
 +
 +-> [[https://forum.openwrt.org/viewtopic.php?id=33130|forum post]]
 +
 +-> [[https://dev.openwrt.org/ticket/10525|target: add new target for Soekris net6501 embedded x86 platform]]
 +
 +-> [[https://dev.openwrt.org/ticket/12262|[PATCH/x86_generic] Add Soekris net6501 device drivers (Intel Atom board)]]
 +
 +Boots up from SATA with a custom-compiled Attitude Adjustment (12.09) kernel. Kernel needs SATA AHCI support compiled in to boot from SATA. Correct ethernet driver is e1000e (can be a module package).
 +
 +===== Hardware Highlights =====
 +
 +The CPU is a 32-bit x86 Intel Atom. There is an upgradable built-in BIOS, an external serial port (DB9), LEDs and temperature sensors, a management (watchdog) microcontroller, and an "extra" FPGA connected to GPIO pins. 
 +
 +The device has 4x gigabit ethernet ports connected to an Intel switch chip. There is no wireless connectivity by default: it can be added via the internal miniPCIe slot, the internal PCIe slot, or USB. It does not ship with any permanent disk space by default: storage can be added via internal SATA ports, an mSATA/miniPCIe slot, or USB ports (the bootloader can be configured to load from any of these devices).
 +
 +^ Model ^ CPU Speed ^ RAM Size ^
 +| net6501-30    600MHz  | 512MB |
 +| net6501-50 |  1GHz  | 1GB |
 +| net6501-70    1.5GHz  | 2GB |
 +
 +^ CPU ^ Ethernet ^ USB ^ Serial ^ JTag ^
 +| Intel Atom E6xx w/ EG20T companion | 4 x GigE (Intel 82574L) | Yes, multiple 2.0 | Yes, multiple  | ? |
 +
 +===== Installation =====
 +
 +
 +==== Upgrading OpenWrt ====
 +
 +As of Attitude Adjustment 12.09, x86-based images can be upgraded using sysupgrade. Use a regular "combined" .img file (squashfs confirmed from command-line, ext4 maybe?, luci maybe?).
 +
 +See generic [[docs:guide-user:installation:generic.sysupgrade]] directions.
 +
 +===== Bootlogs =====
 +==== OpenWrt bootlog ====
 +(below is partially sanitized)
 +<WRAP bootlog>
 +<nowiki>   0.000000] Linux version 3.3.8 (user@host) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #8 Sat Oct 13 23:52:36 CEST 2012
 +[    0.000000] KERNEL supported cpus:
 +[    0.000000]   Intel GenuineIntel
 +[    0.000000] BIOS-provided physical RAM map:
 +[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
 +[    0.000000]  BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
 +[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 +[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffe0000 (usable)
 +[    0.000000]  BIOS-e820: 000000003ffe0000 - 0000000080000000 (reserved)
 +[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 +[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 +[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 +[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
 +[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
 +[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
 +[    0.000000] last_pfn = 0x3ffe0 max_arch_pfn = 0x100000
 +[    0.000000] MTRR default type: uncachable
 +[    0.000000] MTRR fixed ranges enabled:
 +[    0.000000]   00000-9FFFF write-back
 +[    0.000000]   A0000-BFFFF uncachable
 +[    0.000000]   C0000-FFFFF write-protect
 +[    0.000000] MTRR variable ranges enabled:
 +[    0.000000]   0 base 000000000 mask FC0000000 write-back
 +[    0.000000]   1 disabled
 +[    0.000000]   2 disabled
 +[    0.000000]   3 disabled
 +[    0.000000]   4 disabled
 +[    0.000000]   5 disabled
 +[    0.000000]   6 disabled
 +[    0.000000]   7 disabled
 +[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
 +[    0.000000] found SMP MP-table at [c00fe100] fe100
 +[    0.000000] initial memory mapped : 0 - 01800000
 +[    0.000000] Base memory trampoline at [c009a000] 9a000 size 4096
 +[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
 +[    0.000000]  0000000000 - 0000400000 page 4k
 +[    0.000000]  0000400000 - 0037400000 page 2M
 +[    0.000000]  0037400000 - 00377fe000 page 4k
 +[    0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
 +[    0.000000] ACPI Error: A valid RSDP was not found (20120111/tbxfroot-219)
 +[    0.000000] 135MB HIGHMEM available.
 +[    0.000000] 887MB LOWMEM available.
 +[    0.000000]   mapped low ram: 0 - 377fe000
 +[    0.000000]   low ram: 0 - 377fe000
 +[    0.000000] Zone PFN ranges:
 +[    0.000000]   DMA      0x00000010 -> 0x00001000
 +[    0.000000]   Normal   0x00001000 -> 0x000377fe
 +[    0.000000]   HighMem  0x000377fe -> 0x0003ffe0
 +[    0.000000] Movable zone start PFN for each node
 +[    0.000000] Early memory PFN ranges
 +[    0.000000]     0: 0x00000010 -> 0x0000009b
 +[    0.000000]     0: 0x00000100 -> 0x0003ffe0
 +[    0.000000] On node 0 totalpages: 261995
 +[    0.000000] free_area_init_node: node 0, pgdat c12f7f20, node_mem_map f6ffd200
 +[    0.000000]   DMA zone: 32 pages used for memmap
 +[    0.000000]   DMA zone: 0 pages reserved
 +[    0.000000]   DMA zone: 3947 pages, LIFO batch:0
 +[    0.000000]   Normal zone: 1744 pages used for memmap
 +[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
 +[    0.000000]   HighMem zone: 272 pages used for memmap
 +[    0.000000]   HighMem zone: 34514 pages, LIFO batch:7
 +[    0.000000] Using APIC driver default
 +[    0.000000] Intel MultiProcessor Specification v1.4
 +[    0.000000]     Virtual Wire compatibility mode.
 +[    0.000000] MPTABLE: OEM ID: Soekris 
 +[    0.000000] MPTABLE: Product ID: net6501     
 +[    0.000000] MPTABLE: APIC at: 0xFEE00000
 +[    0.000000] Processor #0 (Bootup-CPU)
 +[    0.000000] Processor #1
 +[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
 +[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
 +[    0.000000] Processors: 1
 +[    0.000000] nr_irqs_gsi: 40
 +[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
 +[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
 +[    0.000000] pcpu-alloc: [0] 0 
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259947
 +[    0.000000] Kernel command line: block2mtd.block2mtd=/dev/sda2,65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootwait console=ttyS0,38400n8 noinitrd reboot=bios
 +[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
 +[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 +[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
 +[    0.000000] Initializing CPU#0
 +[    0.000000] Initializing HighMem for node 0 (000377fe:0003ffe0)
 +[    0.000000] Memory: 1035400k/1048448k available (2442k kernel code, 12580k reserved, 614k data, 212k init, 139144k highmem)
 +[    0.000000] virtual kernel memory layout:
 +[    0.000000]     fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
 +[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
 +[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
 +[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
 +[    0.000000]       .init : 0xc12fd000 - 0xc1332000   ( 212 kB)
 +[    0.000000]       .data : 0xc1262b02 - 0xc12fc4c0   ( 614 kB)
 +[    0.000000]       .text : 0xc1000000 - 0xc1262b02   (2442 kB)
 +[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
 +[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 +[    0.000000] NR_IRQS:2304 nr_irqs:256 16
 +[    0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
 +[    0.000000] console [ttyS0] enabled
 +[    0.000000] Fast TSC calibration using PIT
 +[    0.000000] Detected 999.979 MHz processor.
 +[    0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.95 BogoMIPS (lpj=9999790)
 +[    0.038340] pid_max: default: 32768 minimum: 301
 +[    0.040156] Mount-cache hash table entries: 512
 +[    0.050354] using mwait in idle threads.
 +[    0.060029] CPU: Genuine Intel(R) CPU        @ 1.00GHz stepping 01
 +[    0.083773] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver.
 +[    0.110015] ... version:                3
 +[    0.120009] ... bit width:              40
 +[    0.130009] ... generic registers:      2
 +[    0.140010] ... value mask:             000000ffffffffff
 +[    0.150010] ... max period:             000000007fffffff
 +[    0.160009] ... fixed-purpose events:   3
 +[    0.170009] ... event mask:             0000000700000003
 +[    0.180205] Enabling APIC mode:  Flat.  Using 1 I/O APICs
 +[    0.190476] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
 +[    0.420676] NET: Registered protocol family 16
 +[    0.431811] PCI: PCI BIOS revision 2.01 entry at 0xfac61, last bus=13
 +[    0.440010] PCI: Using configuration type 1 for base access
 +[    0.461349] bio: create slab <bio-0> at 0
 +[    0.470287] ACPI: Interpreter disabled.
 +[    0.481009] SCSI subsystem initialized
 +[    0.490390] libata version 3.00 loaded.
 +[    0.490931] PCI: Probing PCI hardware
 +[    0.500010] PCI: Probing PCI hardware (bus 00)
 +[    0.500022] PCI: root bus 00: using default resources
 +[    0.500230] PCI host bridge to bus 0000:00
 +[    0.510016] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 +[    0.520011] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
 +[    0.530036] pci 0000:00:00.0: [8086:4114] type 0 class 0x000600
 +[    0.530140] pci 0000:00:01.0: [8086:8183] type 0 class 0x000600
 +[    0.530319] pci 0000:00:17.0: [8086:8184] type 1 class 0x000604
 +[    0.530479] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
 +[    0.530544] pci 0000:00:18.0: [8086:8185] type 1 class 0x000604
 +[    0.530701] pci 0000:00:18.0: PME# supported from D0 D3hot D3cold
 +[    0.530772] pci 0000:00:19.0: [8086:8180] type 1 class 0x000604
 +[    0.530929] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
 +[    0.530993] pci 0000:00:1a.0: [8086:8181] type 1 class 0x000604
 +[    0.531149] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
 +[    0.531215] pci 0000:00:1f.0: [8086:8186] type 0 class 0x000601
 +[    0.531488] pci 0000:01:00.0: [8086:8800] type 1 class 0x000604
 +[    0.531572] pci 0000:01:00.0: reg 38: [mem 0x00000000-0x0000ffff pref]
 +[    0.531683] pci 0000:01:00.0: supports D1
 +[    0.531697] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
 +[    0.531738] pci 0000:00:17.0: PCI bridge to [bus 01-02]
 +[    0.540018] pci 0000:00:17.0:   bridge window [io  0x1000-0x1fff]
 +[    0.540038] pci 0000:00:17.0:   bridge window [mem 0xa0000000-0xa0ffffff]
 +[    0.540181] pci 0000:02:00.0: [8086:8801] type 0 class 0x00ff00
 +[    0.540266] pci 0000:02:00.0: reg 14: [mem 0xa0000000-0xa00007ff]
 +[    0.540390] pci 0000:02:00.0: reg 30: [mem 0x98000000-0x9801ffff pref]
 +[    0.540567] pci 0000:02:00.1: [8086:8802] type 0 class 0x000200
 +[    0.540631] pci 0000:02:00.1: reg 10: [io  0x1000-0x101f]
 +[    0.540669] pci 0000:02:00.1: reg 14: [mem 0xa0000800-0xa00009ff]
 +[    0.540891] pci 0000:02:00.1: PME# supported from D0
 +[    0.540971] pci 0000:02:00.2: [8086:8803] type 0 class 0x00ff00
 +[    0.541057] pci 0000:02:00.2: reg 14: [mem 0xa0000a00-0xa0000a3f]
 +[    0.541278] pci 0000:02:00.2: PME# supported from D0
 +[    0.541377] pci 0000:02:02.0: [8086:8804] type 0 class 0x000c03
 +[    0.541442] pci 0000:02:02.0: reg 10: [mem 0xa0000b00-0xa0000bff]
 +[    0.541686] pci 0000:02:02.0: PME# supported from D0 D3hot
 +[    0.541771] pci 0000:02:02.1: [8086:8805] type 0 class 0x000c03
 +[    0.541836] pci 0000:02:02.1: reg 10: [mem 0xa0000c00-0xa0000cff]
 +[    0.550102] pci 0000:02:02.1: PME# supported from D0 D3hot
 +[    0.550183] pci 0000:02:02.2: [8086:8806] type 0 class 0x000c03
 +[    0.550248] pci 0000:02:02.2: reg 10: [mem 0xa0000d00-0xa0000dff]
 +[    0.550492] pci 0000:02:02.2: PME# supported from D0 D3hot
 +[    0.550577] pci 0000:02:02.3: [8086:8807] type 0 class 0x000c03
 +[    0.550648] pci 0000:02:02.3: reg 10: [mem 0xa0000e00-0xa0000eff]
 +[    0.550909] pci 0000:02:02.3: PME# supported from D0 D3hot
 +[    0.550994] pci 0000:02:02.4: [8086:8808] type 0 class 0x000c03
 +[    0.551080] pci 0000:02:02.4: reg 14: [mem 0xa0002000-0xa0003fff]
 +[    0.551301] pci 0000:02:02.4: PME# supported from D0
 +[    0.551395] pci 0000:02:04.0: [8086:8809] type 0 class 0x000805
 +[    0.551459] pci 0000:02:04.0: reg 10: [mem 0xa0004000-0xa00041ff]
 +[    0.551761] pci 0000:02:04.1: [8086:880a] type 0 class 0x000805
 +[    0.551826] pci 0000:02:04.1: reg 10: [mem 0xa0004200-0xa00043ff]
 +[    0.552156] pci 0000:02:06.0: [8086:880b] type 0 class 0x000106
 +[    0.552313] pci 0000:02:06.0: reg 20: [io  0x1020-0x103f]
 +[    0.552350] pci 0000:02:06.0: reg 24: [mem 0xa0004400-0xa00047ff]
 +[    0.552389] pci 0000:02:06.0: reg 30: [mem 0x98000000-0x9801ffff pref]
 +[    0.552591] pci 0000:02:08.0: [8086:880c] type 0 class 0x000c03
 +[    0.552655] pci 0000:02:08.0: reg 10: [mem 0xa0004800-0xa00048ff]
 +[    0.552899] pci 0000:02:08.0: PME# supported from D0 D3hot
 +[    0.552984] pci 0000:02:08.1: [8086:880d] type 0 class 0x000c03
 +[    0.553048] pci 0000:02:08.1: reg 10: [mem 0xa0004900-0xa00049ff]
 +[    0.553292] pci 0000:02:08.1: PME# supported from D0 D3hot
 +[    0.553371] pci 0000:02:08.2: [8086:880e] type 0 class 0x000c03
 +[    0.553436] pci 0000:02:08.2: reg 10: [mem 0xa0004a00-0xa0004aff]
 +[    0.553679] pci 0000:02:08.2: PME# supported from D0 D3hot
 +[    0.553764] pci 0000:02:08.3: [8086:880f] type 0 class 0x000c03
 +[    0.553835] pci 0000:02:08.3: reg 10: [mem 0xa0004b00-0xa0004bff]
 +[    0.554096] pci 0000:02:08.3: PME# supported from D0 D3hot
 +[    0.554205] pci 0000:02:0a.0: [8086:8810] type 0 class 0x00ff00
 +[    0.554297] pci 0000:02:0a.0: reg 14: [mem 0xa0004c00-0xa0004cff]
 +[    0.554601] pci 0000:02:0a.1: [8086:8811] type 0 class 0x000700
 +[    0.554666] pci 0000:02:0a.1: reg 10: [io  0x1040-0x1047]
 +[    0.554704] pci 0000:02:0a.1: reg 14: [mem 0xa0004d00-0xa0004d0f]
 +[    0.554926] pci 0000:02:0a.1: PME# supported from D0
 +[    0.555005] pci 0000:02:0a.2: [8086:8812] type 0 class 0x000700
 +[    0.555069] pci 0000:02:0a.2: reg 10: [io  0x1048-0x104f]
 +[    0.555107] pci 0000:02:0a.2: reg 14: [mem 0xa0004d10-0xa0004d1f]
 +[    0.555388] pci 0000:02:0a.3: [8086:8813] type 0 class 0x000700
 +[    0.555452] pci 0000:02:0a.3: reg 10: [io  0x1050-0x1057]
 +[    0.555490] pci 0000:02:0a.3: reg 14: [mem 0xa0004d20-0xa0004d2f]
 +[    0.555770] pci 0000:02:0a.4: [8086:8814] type 0 class 0x000700
 +[    0.555834] pci 0000:02:0a.4: reg 10: [io  0x1058-0x105f]
 +[    0.555872] pci 0000:02:0a.4: reg 14: [mem 0xa0004d30-0xa0004d3f]
 +[    0.556179] pci 0000:02:0c.0: [8086:8815] type 0 class 0x00ff00
 +[    0.556272] pci 0000:02:0c.0: reg 14: [mem 0xa0004e00-0xa0004eff]
 +[    0.556577] pci 0000:02:0c.1: [8086:8816] type 0 class 0x000c80
 +[    0.556663] pci 0000:02:0c.1: reg 14: [mem 0xa0004f00-0xa0004f1f]
 +[    0.556943] pci 0000:02:0c.2: [8086:8817] type 0 class 0x000c80
 +[    0.557029] pci 0000:02:0c.2: reg 14: [mem 0xa0005000-0xa00050ff]
 +[    0.557310] pci 0000:02:0c.3: [8086:8818] type 0 class 0x000c09
 +[    0.557396] pci 0000:02:0c.3: reg 14: [mem 0xa0005200-0xa00053ff]
 +[    0.557677] pci 0000:02:0c.4: [8086:8819] type 0 class 0x00ff00
 +[    0.557763] pci 0000:02:0c.4: reg 14: [mem 0xa0005400-0xa00054ff]
 +[    0.558091] pci 0000:01:00.0: PCI bridge to [bus 02-02]
 +[    0.560024] pci 0000:01:00.0:   bridge window [io  0x1000-0x1fff]
 +[    0.560045] pci 0000:01:00.0:   bridge window [mem 0xa0000000-0xa0ffffff]
 +[    0.560202] pci 0000:03:00.0: [111d:803a] type 1 class 0x000604
 +[    0.560377] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
 +[    0.560418] pci 0000:00:18.0: PCI bridge to [bus 03-07]
 +[    0.570016] pci 0000:00:18.0:   bridge window [io  0x2000-0x3fff]
 +[    0.570036] pci 0000:00:18.0:   bridge window [mem 0xa1000000-0xa3ffffff]
 +[    0.570175] pci 0000:04:02.0: [111d:803a] type 1 class 0x000604
 +[    0.580126] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
 +[    0.580204] pci 0000:04:03.0: [111d:803a] type 1 class 0x000604
 +[    0.580402] pci 0000:04:03.0: PME# supported from D0 D3hot D3cold
 +[    0.580484] pci 0000:04:04.0: [111d:803a] type 1 class 0x000604
 +[    0.580682] pci 0000:04:04.0: PME# supported from D0 D3hot D3cold
 +[    0.580802] pci 0000:03:00.0: PCI bridge to [bus 04-07]
 +[    0.590024] pci 0000:03:00.0:   bridge window [io  0x2000-0x3fff]
 +[    0.590045] pci 0000:03:00.0:   bridge window [mem 0xa1000000-0xa3ffffff]
 +[    0.590225] pci 0000:05:00.0: [8086:10d3] type 0 class 0x000200
 +[    0.590280] pci 0000:05:00.0: reg 10: [mem 0xa1000000-0xa101ffff]
 +[    0.590351] pci 0000:05:00.0: reg 18: [io  0x2000-0x201f]
 +[    0.590394] pci 0000:05:00.0: reg 1c: [mem 0xa1020000-0xa1023fff]
 +[    0.590654] pci 0000:05:00.0: PME# supported from D0 D3hot
 +[    0.590719] pci 0000:04:02.0: PCI bridge to [bus 05-05]
 +[    0.600023] pci 0000:04:02.0:   bridge window [io  0x2000-0x2fff]
 +[    0.600044] pci 0000:04:02.0:   bridge window [mem 0xa1000000-0xa1ffffff]
 +[    0.600229] pci 0000:06:00.0: [8086:10d3] type 0 class 0x000200
 +[    0.600283] pci 0000:06:00.0: reg 10: [mem 0xa2000000-0xa201ffff]
 +[    0.600354] pci 0000:06:00.0: reg 18: [io  0x3000-0x301f]
 +[    0.600397] pci 0000:06:00.0: reg 1c: [mem 0xa2020000-0xa2023fff]
 +[    0.600657] pci 0000:06:00.0: PME# supported from D0 D3hot
 +[    0.600722] pci 0000:04:03.0: PCI bridge to [bus 06-06]
 +[    0.610023] pci 0000:04:03.0:   bridge window [io  0x3000-0x3fff]
 +[    0.610044] pci 0000:04:03.0:   bridge window [mem 0xa2000000-0xa2ffffff]
 +[    0.610228] pci 0000:07:00.0: [8086:4229] type 0 class 0x000280
 +[    0.610299] pci 0000:07:00.0: reg 10: [mem 0xa3000000-0xa3001fff 64bit]
 +[    0.610593] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
 +[    0.610650] pci 0000:04:04.0: PCI bridge to [bus 07-07]
 +[    0.620029] pci 0000:04:04.0:   bridge window [mem 0xa3000000-0xa3ffffff]
 +[    0.620221] pci 0000:08:00.0: [111d:803a] type 1 class 0x000604
 +[    0.620396] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
 +[    0.620437] pci 0000:00:19.0: PCI bridge to [bus 08-0c]
 +[    0.630016] pci 0000:00:19.0:   bridge window [io  0x4000-0x5fff]
 +[    0.630036] pci 0000:00:19.0:   bridge window [mem 0xa4000000-0xa5ffffff]
 +[    0.630180] pci 0000:09:02.0: [111d:803a] type 1 class 0x000604
 +[    0.630379] pci 0000:09:02.0: PME# supported from D0 D3hot D3cold
 +[    0.630457] pci 0000:09:03.0: [111d:803a] type 1 class 0x000604
 +[    0.630654] pci 0000:09:03.0: PME# supported from D0 D3hot D3cold
 +[    0.630730] pci 0000:09:04.0: [111d:803a] type 1 class 0x000604
 +[    0.630928] pci 0000:09:04.0: PME# supported from D0 D3hot D3cold
 +[    0.631047] pci 0000:08:00.0: PCI bridge to [bus 09-0c]
 +[    0.640024] pci 0000:08:00.0:   bridge window [io  0x4000-0x5fff]
 +[    0.640045] pci 0000:08:00.0:   bridge window [mem 0xa4000000-0xa5ffffff]
 +[    0.640231] pci 0000:0a:00.0: [8086:10d3] type 0 class 0x000200
 +[    0.640285] pci 0000:0a:00.0: reg 10: [mem 0xa4000000-0xa401ffff]
 +[    0.640356] pci 0000:0a:00.0: reg 18: [io  0x4000-0x401f]
 +[    0.640399] pci 0000:0a:00.0: reg 1c: [mem 0xa4020000-0xa4023fff]
 +[    0.640660] pci 0000:0a:00.0: PME# supported from D0 D3hot
 +[    0.640725] pci 0000:09:02.0: PCI bridge to [bus 0a-0a]
 +[    0.650023] pci 0000:09:02.0:   bridge window [io  0x4000-0x4fff]
 +[    0.650044] pci 0000:09:02.0:   bridge window [mem 0xa4000000-0xa4ffffff]
 +[    0.650229] pci 0000:0b:00.0: [8086:10d3] type 0 class 0x000200
 +[    0.650284] pci 0000:0b:00.0: reg 10: [mem 0xa5000000-0xa501ffff]
 +[    0.650355] pci 0000:0b:00.0: reg 18: [io  0x5000-0x501f]
 +[    0.650398] pci 0000:0b:00.0: reg 1c: [mem 0xa5020000-0xa5023fff]
 +[    0.650658] pci 0000:0b:00.0: PME# supported from D0 D3hot
 +[    0.650722] pci 0000:09:03.0: PCI bridge to [bus 0b-0b]
 +[    0.660023] pci 0000:09:03.0:   bridge window [io  0x5000-0x5fff]
 +[    0.660044] pci 0000:09:03.0:   bridge window [mem 0xa5000000-0xa5ffffff]
 +[    0.660177] pci 0000:09:04.0: PCI bridge to [bus 0c-0c]
 +[    0.670174] pci 0000:00:1a.0: PCI bridge to [bus 0d-0d]
 +[    0.694688] pci 0000:00:1f.0: default IRQ router [8086:8186]
 +[    0.700082] PCI: pci_cache_line_size set to 64 bytes
 +[    0.700574] reserve RAM buffer: 000000000009b000 - 000000000009ffff 
 +[    0.700590] reserve RAM buffer: 000000003ffe0000 - 000000003fffffff 
 +[    0.701611] pnp: PnP ACPI: disabled
 +[    0.712067] pci 0000:02:00.0: no compatible bridge window for [mem 0x98000000-0x9801ffff pref]
 +[    0.720033] pci 0000:02:06.0: no compatible bridge window for [mem 0x98000000-0x9801ffff pref]
 +[    0.730058] PCI: max bus depth: 3 pci_try_num: 4
 +[    0.730298] pci 0000:00:17.0: BAR 9: assigned [mem 0x80000000-0x801fffff pref]
 +[    0.740018] pci 0000:01:00.0: BAR 9: assigned [mem 0x80000000-0x800fffff pref]
 +[    0.750014] pci 0000:01:00.0: BAR 6: assigned [mem 0x80100000-0x8010ffff pref]
 +[    0.760029] pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
 +[    0.770014] pci 0000:02:06.0: BAR 6: assigned [mem 0x80020000-0x8003ffff pref]
 +[    0.780013] pci 0000:01:00.0: PCI bridge to [bus 02-02]
 +[    0.790014] pci 0000:01:00.0:   bridge window [io  0x1000-0x1fff]
 +[    0.800020] pci 0000:01:00.0:   bridge window [mem 0xa0000000-0xa0ffffff]
 +[    0.810017] pci 0000:01:00.0:   bridge window [mem 0x80000000-0x800fffff pref]
 +[    0.820021] pci 0000:00:17.0: PCI bridge to [bus 01-02]
 +[    0.830012] pci 0000:00:17.0:   bridge window [io  0x1000-0x1fff]
 +[    0.840017] pci 0000:00:17.0:   bridge window [mem 0xa0000000-0xa0ffffff]
 +[    0.850015] pci 0000:00:17.0:   bridge window [mem 0x80000000-0x801fffff pref]
 +[    0.860022] pci 0000:04:02.0: PCI bridge to [bus 05-05]
 +[    0.870013] pci 0000:04:02.0:   bridge window [io  0x2000-0x2fff]
 +[    0.880019] pci 0000:04:02.0:   bridge window [mem 0xa1000000-0xa1ffffff]
 +[    0.890028] pci 0000:04:03.0: PCI bridge to [bus 06-06]
 +[    0.900013] pci 0000:04:03.0:   bridge window [io  0x3000-0x3fff]
 +[    0.910018] pci 0000:04:03.0:   bridge window [mem 0xa2000000-0xa2ffffff]
 +[    0.920027] pci 0000:04:04.0: PCI bridge to [bus 07-07]
 +[    0.930019] pci 0000:04:04.0:   bridge window [mem 0xa3000000-0xa3ffffff]
 +[    0.940026] pci 0000:03:00.0: PCI bridge to [bus 04-07]
 +[    0.950013] pci 0000:03:00.0:   bridge window [io  0x2000-0x3fff]
 +[    0.960019] pci 0000:03:00.0:   bridge window [mem 0xa1000000-0xa3ffffff]
 +[    0.970027] pci 0000:00:18.0: PCI bridge to [bus 03-07]
 +[    0.980012] pci 0000:00:18.0:   bridge window [io  0x2000-0x3fff]
 +[    0.990017] pci 0000:00:18.0:   bridge window [mem 0xa1000000-0xa3ffffff]
 +[    1.000026] pci 0000:09:02.0: PCI bridge to [bus 0a-0a]
 +[    1.010013] pci 0000:09:02.0:   bridge window [io  0x4000-0x4fff]
 +[    1.020019] pci 0000:09:02.0:   bridge window [mem 0xa4000000-0xa4ffffff]
 +[    1.030027] pci 0000:09:03.0: PCI bridge to [bus 0b-0b]
 +[    1.040013] pci 0000:09:03.0:   bridge window [io  0x5000-0x5fff]
 +[    1.050019] pci 0000:09:03.0:   bridge window [mem 0xa5000000-0xa5ffffff]
 +[    1.060027] pci 0000:09:04.0: PCI bridge to [bus 0c-0c]
 +[    1.070035] pci 0000:08:00.0: PCI bridge to [bus 09-0c]
 +[    1.080013] pci 0000:08:00.0:   bridge window [io  0x4000-0x5fff]
 +[    1.090019] pci 0000:08:00.0:   bridge window [mem 0xa4000000-0xa5ffffff]
 +[    1.100027] pci 0000:00:19.0: PCI bridge to [bus 08-0c]
 +[    1.110013] pci 0000:00:19.0:   bridge window [io  0x4000-0x5fff]
 +[    1.120017] pci 0000:00:19.0:   bridge window [mem 0xa4000000-0xa5ffffff]
 +[    1.130022] pci 0000:00:1a.0: PCI bridge to [bus 0d-0d]
 +[    1.140063] pci 0000:00:17.0: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[    1.150035] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[    1.160010] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[    1.170033] pci 0000:00:18.0: PCI->APIC IRQ transform: INT A -> IRQ 17
 +[    1.180078] pci 0000:00:19.0: PCI->APIC IRQ transform: INT A -> IRQ 18
 +[    1.190078] pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 19
 +[    1.200017] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
 +[    1.200034] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
 +[    1.200051] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
 +[    1.200067] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa0ffffff]
 +[    1.200084] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff pref]
 +[    1.200101] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
 +[    1.200117] pci_bus 0000:02: resource 1 [mem 0xa0000000-0xa0ffffff]
 +[    1.200134] pci_bus 0000:02: resource 2 [mem 0x80000000-0x800fffff pref]
 +[    1.200152] pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
 +[    1.200168] pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa3ffffff]
 +[    1.200185] pci_bus 0000:04: resource 0 [io  0x2000-0x3fff]
 +[    1.200201] pci_bus 0000:04: resource 1 [mem 0xa1000000-0xa3ffffff]
 +[    1.200217] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
 +[    1.200233] pci_bus 0000:05: resource 1 [mem 0xa1000000-0xa1ffffff]
 +[    1.200250] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
 +[    1.200266] pci_bus 0000:06: resource 1 [mem 0xa2000000-0xa2ffffff]
 +[    1.200283] pci_bus 0000:07: resource 1 [mem 0xa3000000-0xa3ffffff]
 +[    1.200300] pci_bus 0000:08: resource 0 [io  0x4000-0x5fff]
 +[    1.200316] pci_bus 0000:08: resource 1 [mem 0xa4000000-0xa5ffffff]
 +[    1.200332] pci_bus 0000:09: resource 0 [io  0x4000-0x5fff]
 +[    1.200348] pci_bus 0000:09: resource 1 [mem 0xa4000000-0xa5ffffff]
 +[    1.200365] pci_bus 0000:0a: resource 0 [io  0x4000-0x4fff]
 +[    1.200381] pci_bus 0000:0a: resource 1 [mem 0xa4000000-0xa4ffffff]
 +[    1.200397] pci_bus 0000:0b: resource 0 [io  0x5000-0x5fff]
 +[    1.200413] pci_bus 0000:0b: resource 1 [mem 0xa5000000-0xa5ffffff]
 +[    1.200518] NET: Registered protocol family 2
 +[    1.210145] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
 +[    1.220306] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
 +[    1.232542] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
 +[    1.240652] TCP: Hash tables configured (established 131072 bind 65536)
 +[    1.250008] TCP reno registered
 +[    1.260019] UDP hash table entries: 512 (order: 1, 8192 bytes)
 +[    1.270033] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
 +[    1.280264] NET: Registered protocol family 1
 +[    1.290179] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    1.300013] pci 0000:02:02.0: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    1.310119] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    1.320012] pci 0000:02:02.1: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    1.330088] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    1.340011] pci 0000:02:02.2: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    1.350080] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    1.360011] pci 0000:02:02.3: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    1.370631] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[    1.380011] pci 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[    1.390079] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[    1.400011] pci 0000:02:08.1: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[    1.410077] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[    1.420011] pci 0000:02:08.2: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[    1.430078] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[    1.440011] pci 0000:02:08.3: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[    1.460022] PCI: CLS 32 bytes, default 64
 +[    1.460538] platform rtc_cmos: registered platform RTC device (no PNP device found)
 +[    1.470334] scx200: NatSemi SCx200 Driver
 +[    1.482009] highmem bounce pool size: 64 pages
 +[    1.510255] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +[    1.520012] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    1.530853] msgmni has been set to 1750
 +[    1.540045] io scheduler noop registered
 +[    1.550009] io scheduler deadline registered (default)
 +[    1.560095] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[    1.570013] pch_gpio 0000:02:00.2: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[    1.580051] gpiochip_add: registered GPIOs 244 to 255 on device: 0000:02:00.2
 +[    1.601907] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
 +[    1.610304] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a TI16750
 +[    1.630278] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    1.640013] serial 0000:02:0a.1: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    1.660018] 0000:02:0a.1: ttyS1 at I/O 0x1040 (irq = 19) is a 16550A
 +[    1.670248] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    1.680012] serial 0000:02:0a.2: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    1.690083] Couldn't register serial port 0000:02:0a.2: -28
 +[    1.700063] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    1.710011] serial 0000:02:0a.3: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    1.720081] Couldn't register serial port 0000:02:0a.3: -28
 +[    1.730079] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    1.740011] serial 0000:02:0a.4: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    1.750081] Couldn't register serial port 0000:02:0a.4: -28
 +[    1.760886] Non-volatile memory driver v1.3
 +[    1.770162] ACPI Exception: AE_BAD_PARAMETER, Thread 4135796736 could not acquire Mutex [0x1] (20120111/utmutex-276)
 +[    1.800187] ACPI Exception: AE_BAD_PARAMETER, Thread 4135796736 could not acquire Mutex [0x1] (20120111/utmutex-276)
 +[    1.830186] gpiochip_add: registered GPIOs 0 to 4 on device: sch_gpio_core
 +[    1.840012] gpiochip_add: registered GPIOs 5 to 13 on device: sch_gpio_resume
 +[    1.850022] ACPI Exception: AE_BAD_PARAMETER, Thread 4135796736 could not acquire Mutex [0x1] (20120111/utmutex-276)
 +[    1.880752] ahci 0000:02:06.0: version 3.0
 +[    1.880796] pci 0000:01:00.0: using bridge 0000:00:17.0 INT B to get IRQ 17
 +[    1.890012] ahci 0000:02:06.0: PCI->APIC IRQ transform: INT B -> IRQ 17
 +[    1.900133] ahci 0000:02:06.0: irq 40 for MSI/MSI-X
 +[    1.900235] ahci: SSS flag set, parallel bus scan disabled
 +[    1.910091] ahci 0000:02:06.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
 +[    1.920016] ahci 0000:02:06.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc 
 +[    1.930017] ahci 0000:02:06.0: setting latency timer to 64
 +[    1.931661] scsi0 : ahci
 +[    1.940533] scsi1 : ahci
 +[    1.950467] ata1: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004500 irq 40
 +[    1.960016] ata2: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004580 irq 40
 +[    2.320050] ata1: SATA link down (SStatus 0 SControl 300)
 +[    2.470025] Switching to clocksource tsc
 +[    2.678314] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 +[    2.708749] ata2.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
 +[    2.725687] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
 +[    2.758649] ata2.00: configured for UDMA/133
 +[    2.771711] scsi 1:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.15 PQ: 0 ANSI: 5
 +[    2.796790] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
 +[    2.820157] sd 1:0:0:0: [sda] Write Protect is off
 +[    2.834503] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
 +[    2.834624] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 +[    2.864500]  sda: sda1 sda2
 +[    2.874188] sd 1:0:0:0: [sda] Attached SCSI disk
 +[    2.888360] Creating 1 MTD partitions on "rootfs":
 +[    2.902701] 0x000000000000-0x000004070000 : "rootfs"
 +[    2.918544] mtd: partition "rootfs" set to be root filesystem
 +[    2.937737] mtd: partition "rootfs_data" created automatically, ofs=160000, len=3F10000 
 +[    2.961959] 0x000000160000-0x000004070000 : "rootfs_data"
 +[    2.979089] block2mtd: mtd0: [rootfs] erase_size = 64KiB [65536]
 +[    2.997305] pci 0000:01:00.0: using bridge 0000:00:17.0 INT C to get IRQ 18
 +[    3.018145] pch_spi 0000:02:0c.1: PCI->APIC IRQ transform: INT C -> IRQ 18
 +[    3.039168] pch-spi pch-spi.0: Use DMA for data transfers
 +[    3.056022] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
 +[    3.075073] rtc0: alarms up to one day, 114 bytes nvram
 +[    3.091065] cpuidle: using governor ladder
 +[    3.103515] TCP cubic registered
 +[    3.113172] NET: Registered protocol family 17
 +[    3.126528] 8021q: 802.1Q VLAN Support v1.8
 +[    3.139081] Using IPI Shortcut mode
 +[    3.151659] rtc_cmos rtc_cmos: setting system clock to 2012-10-01 14:51:02 UTC (1349103062)
 +[    3.180708] VFS: Mounted root (squashfs filesystem) readonly on device 31:0.
 +[    3.201921] Freeing unused kernel memory: 212k freed
 +[    7.388817] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
 +[    8.067202] usbcore: registered new interface driver usbfs
 +[    8.083727] usbcore: registered new interface driver hub
 +[    8.101159] usbcore: registered new device driver usb
 +[    8.126043] PPP generic driver version 2.4.2
 +[    8.161116] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[    8.226041] NET: Registered protocol family 24
 +[    8.245060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 +[    8.264682] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    8.285516] ehci_hcd 0000:02:02.3: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    8.306393] ehci_hcd 0000:02:02.3: setting latency timer to 64
 +[    8.306412] ehci_hcd 0000:02:02.3: EHCI Host Controller
 +[    8.322114] ehci_hcd 0000:02:02.3: new USB bus registered, assigned bus number 1
 +[    8.368410] ehci_hcd 0000:02:02.3: cache line size of 32 is not supported
 +[    8.368452] ehci_hcd 0000:02:02.3: irq 19, io mem 0xa0000e00
 +[    8.398401] ehci_hcd 0000:02:02.3: USB 2.0 started, EHCI 1.00
 +[    8.416054] hub 1-0:1.0: USB hub found
 +[    8.427282] hub 1-0:1.0: 3 ports detected
 +[    8.439487] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[    8.460318] ehci_hcd 0000:02:08.3: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[    8.481182] ehci_hcd 0000:02:08.3: setting latency timer to 64
 +[    8.481200] ehci_hcd 0000:02:08.3: EHCI Host Controller
 +[    8.496849] ehci_hcd 0000:02:08.3: new USB bus registered, assigned bus number 2
 +[    8.548416] ehci_hcd 0000:02:08.3: cache line size of 32 is not supported
 +[    8.548454] ehci_hcd 0000:02:08.3: irq 16, io mem 0xa0004b00
 +[    8.578458] ehci_hcd 0000:02:08.3: USB 2.0 started, EHCI 1.00
 +[    8.596097] hub 2-0:1.0: USB hub found
 +[    8.607311] hub 2-0:1.0: 3 ports detected
 +[    8.627395] nf_conntrack version 0.5.0 (16181 buckets, 64724 max)
 +[    8.729451] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
 +[    8.746927] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
 +[    8.764730] e1000e 0000:05:00.0: Disabling ASPM L0s 
 +[    8.779632] pcieport 0000:03:00.0: using bridge 0000:00:18.0 INT C to get IRQ 19
 +[    8.801754] e1000e 0000:05:00.0: PCI->APIC IRQ transform: INT C -> IRQ 19
 +[    8.822538] e1000e 0000:05:00.0: irq 41 for MSI/MSI-X
 +[    8.822565] e1000e 0000:05:00.0: irq 42 for MSI/MSI-X
 +[    8.822588] e1000e 0000:05:00.0: irq 43 for MSI/MSI-X
 +[    8.838403] Clocksource tsc unstable (delta = 161376495 ns)
 +[    8.855178] Switching to clocksource jiffies
 +[    8.991879] e1000e 0000:05:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:00:24:ff:ff:ff
 +[    8.997963] e1000e 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
 +[    9.008045] e1000e 0000:05:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
 +[    9.017985] e1000e 0000:06:00.0: Disabling ASPM L0s 
 +[    9.028009] pcieport 0000:03:00.0: using bridge 0000:00:18.0 INT D to get IRQ 16
 +[    9.037960] e1000e 0000:06:00.0: PCI->APIC IRQ transform: INT D -> IRQ 16
 +[    9.048423] e1000e 0000:06:00.0: irq 44 for MSI/MSI-X
 +[    9.048448] e1000e 0000:06:00.0: irq 45 for MSI/MSI-X
 +[    9.048472] e1000e 0000:06:00.0: irq 46 for MSI/MSI-X
 +[    9.213626] e1000e 0000:06:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:00:24:ff:ff:ff
 +[    9.217964] e1000e 0000:06:00.0: eth1: Intel(R) PRO/1000 Network Connection
 +[    9.228046] e1000e 0000:06:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
 +[    9.237993] e1000e 0000:0a:00.0: Disabling ASPM L0s 
 +[    9.248007] pcieport 0000:08:00.0: using bridge 0000:00:19.0 INT C to get IRQ 16
 +[    9.257961] e1000e 0000:0a:00.0: PCI->APIC IRQ transform: INT C -> IRQ 16
 +[    9.268416] e1000e 0000:0a:00.0: irq 47 for MSI/MSI-X
 +[    9.268442] e1000e 0000:0a:00.0: irq 48 for MSI/MSI-X
 +[    9.268467] e1000e 0000:0a:00.0: irq 49 for MSI/MSI-X
 +[    9.433644] e1000e 0000:0a:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:00:24:ff:ff:ff
 +[    9.437963] e1000e 0000:0a:00.0: eth2: Intel(R) PRO/1000 Network Connection
 +[    9.448045] e1000e 0000:0a:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
 +[    9.457984] e1000e 0000:0b:00.0: Disabling ASPM L0s 
 +[    9.468007] pcieport 0000:08:00.0: using bridge 0000:00:19.0 INT D to get IRQ 17
 +[    9.477960] e1000e 0000:0b:00.0: PCI->APIC IRQ transform: INT D -> IRQ 17
 +[    9.488421] e1000e 0000:0b:00.0: irq 50 for MSI/MSI-X
 +[    9.488447] e1000e 0000:0b:00.0: irq 51 for MSI/MSI-X
 +[    9.488472] e1000e 0000:0b:00.0: irq 52 for MSI/MSI-X
 +[    9.653644] e1000e 0000:0b:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:00:24:ff:ff:ff
 +[    9.657963] e1000e 0000:0b:00.0: eth3: Intel(R) PRO/1000 Network Connection
 +[    9.668045] e1000e 0000:0b:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
 +[    9.684389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 +[    9.688051] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    9.697964] ohci_hcd 0000:02:02.0: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    9.708020] ohci_hcd 0000:02:02.0: setting latency timer to 64
 +[    9.708038] ohci_hcd 0000:02:02.0: OHCI Host Controller
 +[    9.718005] ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
 +[    9.728010] ohci_hcd 0000:02:02.0: irq 19, io mem 0xa0000b00
 +[    9.802487] hub 3-0:1.0: USB hub found
 +[    9.807978] hub 3-0:1.0: 1 port detected
 +[    9.818163] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    9.827962] ohci_hcd 0000:02:02.1: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    9.838009] ohci_hcd 0000:02:02.1: setting latency timer to 64
 +[    9.838027] ohci_hcd 0000:02:02.1: OHCI Host Controller
 +[    9.847992] ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4
 +[    9.858003] ohci_hcd 0000:02:02.1: irq 19, io mem 0xa0000c00
 +[    9.932442] hub 4-0:1.0: USB hub found
 +[    9.937978] hub 4-0:1.0: 1 port detected
 +[    9.948179] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19
 +[    9.957963] ohci_hcd 0000:02:02.2: PCI->APIC IRQ transform: INT D -> IRQ 19
 +[    9.968014] ohci_hcd 0000:02:02.2: setting latency timer to 64
 +[    9.968032] ohci_hcd 0000:02:02.2: OHCI Host Controller
 +[    9.977993] ohci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5
 +[    9.988005] ohci_hcd 0000:02:02.2: irq 19, io mem 0xa0000d00
 +[   10.062420] hub 5-0:1.0: USB hub found
 +[   10.067977] hub 5-0:1.0: 1 port detected
 +[   10.078154] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[   10.087962] ohci_hcd 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[   10.098011] ohci_hcd 0000:02:08.0: setting latency timer to 64
 +[   10.098028] ohci_hcd 0000:02:08.0: OHCI Host Controller
 +[   10.107993] ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 6
 +[   10.118010] ohci_hcd 0000:02:08.0: irq 16, io mem 0xa0004800
 +[   10.192422] hub 6-0:1.0: USB hub found
 +[   10.197978] hub 6-0:1.0: 1 port detected
 +[   10.208141] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[   10.217963] ohci_hcd 0000:02:08.1: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[   10.228011] ohci_hcd 0000:02:08.1: setting latency timer to 64
 +[   10.228030] ohci_hcd 0000:02:08.1: OHCI Host Controller
 +[   10.237992] ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 7
 +[   10.248005] ohci_hcd 0000:02:08.1: irq 16, io mem 0xa0004900
 +[   10.322428] hub 7-0:1.0: USB hub found
 +[   10.327977] hub 7-0:1.0: 1 port detected
 +[   10.338152] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16
 +[   10.347962] ohci_hcd 0000:02:08.2: PCI->APIC IRQ transform: INT A -> IRQ 16
 +[   10.358019] ohci_hcd 0000:02:08.2: setting latency timer to 64
 +[   10.358037] ohci_hcd 0000:02:08.2: OHCI Host Controller
 +[   10.367993] ohci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 8
 +[   10.378005] ohci_hcd 0000:02:08.2: irq 16, io mem 0xa0004a00
 +[   10.452429] hub 8-0:1.0: USB hub found
 +[   10.457977] hub 8-0:1.0: 1 port detected
 +[   10.482416] uhci_hcd: USB Universal Host Controller Interface driver
 +[   12.889774] 8021q: adding VLAN 0 to HW filter on device eth0
 +[   12.898907] device eth0 entered promiscuous mode
 +[   15.989314] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
 +[   16.009266] br-lan: port 1(eth0) entered forwarding state
 +[   16.027996] br-lan: port 1(eth0) entered forwarding state
 +[   18.027966] br-lan: port 1(eth0) entered forwarding state
 +[   19.611763] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
 +[   19.618319] jffs2_build_filesystem(): unlocking the mtd device... done.
 +[   19.629786] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
 +[   28.043709] JFFS2 notice: (1071) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
 +[ 2423.738143] e1000e: eth0 NIC Link is Down
 +[ 2423.749186] br-lan: port 1(eth0) entered disabled state
 +[ 6208.589070] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
 +[ 6208.599261] br-lan: port 1(eth0) entered forwarding state
 +[ 6208.607983] br-lan: port 1(eth0) entered forwarding state
 +[ 6210.607966] br-lan: port 1(eth0) entered forwarding state</nowiki>
 +</WRAP>\\
 +
 +===== Basic configuration =====
 +
 +-> [[docs:guide-quick-start:checks_and_troubleshooting|Basic configuration]] After flashing, proceed with this.\\
 +Set up your Internet connection, configure wireless, configure USB port, etc.
 +
 +
 +===== Specific Configuration =====
 +==== Interfaces ====
 +
 +**<color red>Work in progress</color>**
 +
 +The default network configuration is:
 +^ Interface Name   ^ Description          ^ Default configuration   ^
 +| br-lan           | LAN & WiFi           | 192.168.1.1/24          |
 +| vlan0 (eth0.0)   | LAN ports (1 to 4)   | None                    |
 +| vlan1 (eth0.1)   | WAN port             | DHCP                    |
 +| wl0              | WiFi                 | Disabled                |
 +
 +==== Switch Ports (for VLANs) ====
 +
 +**<color red>Work in progress</color>**
 +
 +Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.
 +
 +^ Port             ^ Switch port   ^
 +| Internet (WAN)   | 4             |
 +| LAN 1            | 3             |
 +| LAN 2            | 2             |
 +| LAN 3            | 1             |
 +| LAN 4            | 0             |
 +
 +==== Failsafe mode ====
 +
 +-> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]]
 +
 +==== Buttons ====
 +
 +The hardware reset button does what you would expect.
 +
 +===== Hardware =====
 +==== Info ====
 +| **[[wp>Instruction set|Architecture]]:**  | [[wp>x86]] |
 +| **Vendor:**                               | [[wp>Intel]]  |
 +| **[[docs:techref:bootloader]]:**           | GRUB legacy (grub2 does not work?) |
 +| **[[docs:hardware:soc|System-On-Chip]]:**  | Intel Atom E6xx single chip processor with EG20T companion chip |
 +| **[[docs:hardware:cpu|CPU]]/Speed**        | 500MHz to 1.6GHz |
 +| **Flash-Chip:**      | None |
 +| **BIOS/BOOT size:**  | 8192 KiB |
 +| **RAM:**             | 512MB to 1.5GB   |
 +| **Wireless:**        | None (miniPCIe slot) |
 +| **Ethernet:**        | 4x Intel 82574L Gigabit Ethernet |
 +| **Internet:**        | n/a |
 +| **USB:**             | Yes, bootable, 3 x 2.0 (two internal, one external)   |
 +| **[[docs:hardware:port.serial|Serial]]:**  | [[#Serial|Yes]], two internal, one external (DB9)  |
 +| **[[docs:hardware:port.jtag|JTAG]]:**      | ???  |
 +
 +==== Photos ====
 +
 +The vendor has photos online at [[http://soekris.com/products/net6501.html]].
 +
 +==== Serial ====
 +-> [[docs:hardware:port.serial]] general information about the serial port, serial port cable, etc.
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>GigabitEthernet 4Port USB 3USB PoE Serial MiniPCIexpress 0WNIC x86}}
  • Last modified: 2021/01/19 09:30
  • by danitool